! Started logfile: /scr/pima/bg219i_uvs/J2241+4120_X_dfm.log on Thu May 19 23:41:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2241+4120_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2241+4120_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.826389 visibilities/baseline/integration-bin.
! Found source: J2241+4120
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21420 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2241+4120_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.024754Jy  sigma=22.867290
! Fit after  self-cal, rms=0.782082Jy  sigma=17.271245
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8355 mas, bmaj=1.185 mas, bpa=-38.42 degrees
! Estimated noise=0.504102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.168172 Jy
! Component: 100  -  total flux cleaned = 0.209943 Jy
! Total flux subtracted in 100 components = 0.209943 Jy
! Clean residual min=-0.005996 max=0.016074 Jy/beam
! Clean residual mean=0.000016 rms=0.001705 Jy/beam
! Combined flux in latest and established models = 0.209943 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.209943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076833Jy  sigma=1.543259
! Fit after  self-cal, rms=0.076783Jy  sigma=1.542264
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158912 Jy
! Component: 100  -  total flux cleaned = 0.0226391 Jy
! Total flux subtracted in 100 components = 0.0226391 Jy
! Clean residual min=-0.004290 max=0.004676 Jy/beam
! Clean residual mean=0.000010 rms=0.001110 Jy/beam
! Combined flux in latest and established models = 0.232582 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.232582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073694Jy  sigma=1.424074
! Fit after  self-cal, rms=0.073692Jy  sigma=1.423907
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.119 mas, bmaj=1.43 mas, bpa=-38.69 degrees
! Estimated noise=0.223994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0067178 Jy
! Component: 100  -  total flux cleaned = 0.0105656 Jy
! Component: 150  -  total flux cleaned = 0.012945 Jy
! Component: 200  -  total flux cleaned = 0.0144171 Jy
! Total flux subtracted in 200 components = 0.0144171 Jy
! Clean residual min=-0.004308 max=0.004952 Jy/beam
! Clean residual mean=0.000026 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 0.246999 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 0.246999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073448Jy  sigma=1.399880
! Fit after  self-cal, rms=0.073446Jy  sigma=1.399660
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.119 x 1.43 at -38.69 degrees (North through East)
! Clean map  min=-0.0041066  max=0.21952 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        1.05     KP        0.96     
!   LA        0.97     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     HN        1.02     KP        0.98     
!   LA        0.96     MK        0.98     NL        0.98     OV        0.97     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.11     HN        1.01     KP        1.00     
!   LA        0.95     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     HN        1.00     KP        0.98     
!   LA        0.96     MK        1.00     NL        1.00     OV        0.96     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        1.01     KP        0.98     
!   LA        0.95     MK        0.99     NL        1.01     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        1.02     KP        1.00     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.96     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.10     HN        1.01     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.12     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.00     NL        0.99     OV        0.97     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.12     HN        0.99     KP        1.00     
!   LA        0.98     MK        0.97     NL        1.00     OV        0.96     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.13     HN        1.05     KP        1.01     
!   LA        0.97     MK        0.97     NL        1.00     OV        0.96     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.14     HN        1.03     KP        0.98     
!   LA        0.98     MK        1.02     NL        0.99     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.13     HN        0.99     KP        1.01     
!   LA        0.98     MK        0.98     NL        1.01     OV        0.96     
!   PT        0.96     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.073446Jy  sigma=1.399660
! Fit after  self-cal, rms=0.074527Jy  sigma=1.376283
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.119 mas, bmaj=1.439 mas, bpa=-38.68 degrees
! Estimated noise=0.223182 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114796 Jy
! Component: 100  -  total flux cleaned = -0.00134203 Jy
! Component: 150  -  total flux cleaned = -0.00149546 Jy
! Component: 200  -  total flux cleaned = -0.00156194 Jy
! Total flux subtracted in 200 components = -0.00156194 Jy
! Clean residual min=-0.003096 max=0.004201 Jy/beam
! Clean residual mean=0.000013 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.245437 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 35 components and 0.245437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074463Jy  sigma=1.376023
! Fit after  self-cal, rms=0.074530Jy  sigma=1.375892
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074530Jy  sigma=1.375892
! Fit after  self-cal, rms=0.073068Jy  sigma=1.365338
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.125 mas, bmaj=1.44 mas, bpa=-38.5 degrees
! Estimated noise=0.220221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00290888 Jy
! Component: 100  -  total flux cleaned = -0.00420944 Jy
! Component: 150  -  total flux cleaned = -0.00486108 Jy
! Component: 200  -  total flux cleaned = -0.00502133 Jy
! Total flux subtracted in 200 components = -0.00502133 Jy
! Clean residual min=-0.002585 max=0.003376 Jy/beam
! Clean residual mean=0.000011 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.240416 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 44 components and 0.240416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072855Jy  sigma=1.364440
! Fit after  self-cal, rms=0.072840Jy  sigma=1.364377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226582 Jy
! Component: 100  -  total flux cleaned = 0.00266363 Jy
! Component: 150  -  total flux cleaned = 0.00284932 Jy
! Component: 200  -  total flux cleaned = 0.00274679 Jy
! Total flux subtracted in 200 components = 0.00274679 Jy
! Clean residual min=-0.002383 max=0.003049 Jy/beam
! Clean residual mean=0.000009 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.243162 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.243162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072716Jy  sigma=1.360768
! Fit after  self-cal, rms=0.072706Jy  sigma=1.360557
! Inverting map 
! Added new window around map position (22.2, -43.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272115 Jy
! Component: 100  -  total flux cleaned = 0.00389877 Jy
! Component: 150  -  total flux cleaned = 0.00411755 Jy
! Component: 200  -  total flux cleaned = 0.00430363 Jy
! Total flux subtracted in 200 components = 0.00430363 Jy
! Clean residual min=-0.002524 max=0.002577 Jy/beam
! Clean residual mean=0.000012 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.247466 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 80 components and 0.247466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072517Jy  sigma=1.358809
! Fit after  self-cal, rms=0.072512Jy  sigma=1.358423
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072512Jy  sigma=1.358423
! Fit after  self-cal, rms=0.073395Jy  sigma=1.353734
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.127 mas, bmaj=1.436 mas, bpa=-38.57 degrees
! Estimated noise=0.219162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000918907 Jy
! Component: 100  -  total flux cleaned = -0.000848194 Jy
! Component: 150  -  total flux cleaned = -0.000724745 Jy
! Component: 200  -  total flux cleaned = -0.000640963 Jy
! Total flux subtracted in 200 components = -0.000640963 Jy
! Clean residual min=-0.001897 max=0.002087 Jy/beam
! Clean residual mean=0.000009 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.246825 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 95 components and 0.246825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073327Jy  sigma=1.353253
! Fit after  self-cal, rms=0.073348Jy  sigma=1.353201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.6, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199492 Jy
! Component: 100  -  total flux cleaned = 0.00246229 Jy
! Component: 150  -  total flux cleaned = 0.00275555 Jy
! Component: 200  -  total flux cleaned = 0.00294846 Jy
! Total flux subtracted in 200 components = 0.00294846 Jy
! Clean residual min=-0.001856 max=0.001768 Jy/beam
! Clean residual mean=0.000008 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.249774 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 111 components and 0.249774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073246Jy  sigma=1.352114
! Fit after  self-cal, rms=0.073245Jy  sigma=1.351992
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073245Jy  sigma=1.351992
! Fit after  self-cal, rms=0.074532Jy  sigma=1.346460
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.408 mas, bmaj=2.547 mas, bpa=-29.6 degrees
! Estimated noise=0.262999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000472072 Jy
! Component: 100  -  total flux cleaned = 0.000470191 Jy
! Component: 150  -  total flux cleaned = 0.000564392 Jy
! Component: 200  -  total flux cleaned = 0.000707278 Jy
! Total flux subtracted in 200 components = 0.000707278 Jy
! Clean residual min=-0.001664 max=0.001619 Jy/beam
! Clean residual mean=0.000007 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.250481 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 128 components and 0.250481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074520Jy  sigma=1.346097
! Fit after  self-cal, rms=0.074541Jy  sigma=1.346045
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.85142e-05 Jy
! Component: 100  -  total flux cleaned = 0.000197402 Jy
! Component: 150  -  total flux cleaned = 0.000293237 Jy
! Component: 200  -  total flux cleaned = 0.000321808 Jy
! Total flux subtracted in 200 components = 0.000321808 Jy
! Clean residual min=-0.001598 max=0.001631 Jy/beam
! Clean residual mean=0.000005 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.250803 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 139 components and 0.250803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074536Jy  sigma=1.345954
! Fit after  self-cal, rms=0.074535Jy  sigma=1.345944
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.128 mas, bmaj=1.433 mas, bpa=-38.57 degrees
! Estimated noise=0.219408 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.128 x 1.433 at -38.57 degrees (North through East)
! Clean map  min=-0.0015327  max=0.21524 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8416 mas, bmaj=1.184 mas, bpa=-38.38 degrees
! Estimated noise=0.496345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165452 Jy
! Component: 100  -  total flux cleaned = 0.206272 Jy
! Component: 150  -  total flux cleaned = 0.221549 Jy
! Component: 200  -  total flux cleaned = 0.228073 Jy
! Total flux subtracted in 200 components = 0.228073 Jy
! Clean residual min=-0.003173 max=0.003716 Jy/beam
! Clean residual mean=0.000005 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.228073 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.228073 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.128 mas, bmaj=1.433 mas, bpa=-38.57 degrees
! Estimated noise=0.219408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00619171 Jy
! Component: 100  -  total flux cleaned = 0.00986185 Jy
! Component: 150  -  total flux cleaned = 0.0124599 Jy
! Component: 200  -  total flux cleaned = 0.014379 Jy
! Total flux subtracted in 200 components = 0.014379 Jy
! Clean residual min=-0.001781 max=0.001682 Jy/beam
! Clean residual mean=0.000004 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.242452 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 37 components and 0.242452 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.408 mas, bmaj=2.547 mas, bpa=-29.6 degrees
! Estimated noise=0.262999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210912 Jy
! Component: 100  -  total flux cleaned = 0.00359061 Jy
! Component: 150  -  total flux cleaned = 0.00451711 Jy
! Component: 200  -  total flux cleaned = 0.00516937 Jy
! Total flux subtracted in 200 components = 0.00516937 Jy
! Clean residual min=-0.001686 max=0.001612 Jy/beam
! Clean residual mean=0.000006 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.247621 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049811 Jy
! Component: 100  -  total flux cleaned = 0.000962596 Jy
! Component: 150  -  total flux cleaned = 0.00136864 Jy
! Component: 200  -  total flux cleaned = 0.00172407 Jy
! Total flux subtracted in 200 components = 0.00172407 Jy
! Clean residual min=-0.001616 max=0.001661 Jy/beam
! Clean residual mean=0.000005 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.249345 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 101 components and 0.249345 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.128 mas, bmaj=1.433 mas, bpa=-38.57 degrees
! Estimated noise=0.219408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157564 Jy
! Component: 100  -  total flux cleaned = 3.35543e-05 Jy
! Component: 150  -  total flux cleaned = 0.000132358 Jy
! Component: 200  -  total flux cleaned = 0.000178363 Jy
! Total flux subtracted in 200 components = 0.000178363 Jy
! Clean residual min=-0.001508 max=0.001325 Jy/beam
! Clean residual mean=0.000003 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.249523 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 119 components and 0.249523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074550Jy  sigma=1.346070
! Fit after  self-cal, rms=0.074537Jy  sigma=1.345929
wmodel /J2241+4120_X_map.mod
! wmodel: Unable to open new model file: /J2241+4120_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2241+4120_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.128 x 1.433 at -38.57 degrees (North through East)
! Clean map  min=-0.0014448  max=0.21617 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2241+4120_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.216166 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000347825 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.482721 0.482721 0.965441 1.93088 3.86176 7.72353 15.4471 30.8941 61.7882
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.216 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  621.477 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2241+4120_X_dfm.log closed on Thu May 19 23:41:47 2016