! Started logfile: /scr/pima/bg219i_uvs/J2233+4245_X_dfm.log on Thu May 19 23:41:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2233+4245_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2233+4245_X_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.800966 visibilities/baseline/integration-bin.
! Found source: J2233+4245
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19896 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2233+4245_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015804Jy  sigma=24.930681
! Fit after  self-cal, rms=0.825181Jy  sigma=20.159494
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8338 mas, bmaj=1.193 mas, bpa=-39.75 degrees
! Estimated noise=0.47077 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13125 Jy
! Component: 100  -  total flux cleaned = 0.167201 Jy
! Total flux subtracted in 100 components = 0.167201 Jy
! Clean residual min=-0.006417 max=0.013961 Jy/beam
! Clean residual mean=0.000023 rms=0.001674 Jy/beam
! Combined flux in latest and established models = 0.167201 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.167201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073961Jy  sigma=1.632585
! Fit after  self-cal, rms=0.073908Jy  sigma=1.631158
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138415 Jy
! Component: 100  -  total flux cleaned = 0.0197442 Jy
! Total flux subtracted in 100 components = 0.0197442 Jy
! Clean residual min=-0.004971 max=0.012573 Jy/beam
! Clean residual mean=0.000013 rms=0.001256 Jy/beam
! Combined flux in latest and established models = 0.186945 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.186945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070988Jy  sigma=1.531807
! Fit after  self-cal, rms=0.070975Jy  sigma=1.531129
! Inverting map 
! Added new window around map position (-2, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105886 Jy
! Component: 100  -  total flux cleaned = 0.015681 Jy
! Total flux subtracted in 100 components = 0.015681 Jy
! Clean residual min=-0.004124 max=0.004049 Jy/beam
! Clean residual mean=0.000007 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.202626 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.202626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069233Jy  sigma=1.476860
! Fit after  self-cal, rms=0.069023Jy  sigma=1.471928
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.172 mas, bmaj=1.427 mas, bpa=-43.14 degrees
! Estimated noise=0.214057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00567052 Jy
! Component: 100  -  total flux cleaned = 0.00899929 Jy
! Component: 150  -  total flux cleaned = 0.0112422 Jy
! Component: 200  -  total flux cleaned = 0.0127868 Jy
! Total flux subtracted in 200 components = 0.0127868 Jy
! Clean residual min=-0.002853 max=0.004121 Jy/beam
! Clean residual mean=0.000003 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.215413 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.215413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068651Jy  sigma=1.455007
! Fit after  self-cal, rms=0.068602Jy  sigma=1.453923
! Inverting map 
! Added new window around map position (8.8, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362538 Jy
! Component: 100  -  total flux cleaned = 0.00553998 Jy
! Component: 150  -  total flux cleaned = 0.00689665 Jy
! Component: 200  -  total flux cleaned = 0.00715505 Jy
! Total flux subtracted in 200 components = 0.00715505 Jy
! Clean residual min=-0.002496 max=0.002912 Jy/beam
! Clean residual mean=-0.000000 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.222568 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 61 components and 0.222568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068356Jy  sigma=1.449121
! Fit after  self-cal, rms=0.068341Jy  sigma=1.448657
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.172 x 1.427 at -43.14 degrees (North through East)
! Clean map  min=-0.0022868  max=0.17452 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        1.02     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.02     KP        0.99     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.03     KP        1.03     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.96     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.02     KP        0.98     
!   LA        0.98     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        1.00     KP        1.01     
!   LA        0.98     MK        0.97     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.08     HN        1.03     KP        1.01     
!   LA        1.00     MK        0.98     NL        0.98     OV        0.98     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.09     HN        1.04     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.97     KP        1.00     
!   LA        1.00     MK        1.03     NL        0.99     OV        0.95     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.02     KP        0.98     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.97     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.11     HN        1.01     KP        1.00     
!   LA        0.96     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        1.06     KP        1.02     
!   LA        0.98     MK        1.07     NL        0.98     OV        0.97     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.13     HN        1.01     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.97     
!   PT        1.01     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.068341Jy  sigma=1.448657
! Fit after  self-cal, rms=0.069923Jy  sigma=1.438747
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.174 mas, bmaj=1.43 mas, bpa=-43.2 degrees
! Estimated noise=0.214563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000438278 Jy
! Component: 100  -  total flux cleaned = -0.000780741 Jy
! Component: 150  -  total flux cleaned = -0.000918342 Jy
! Component: 200  -  total flux cleaned = -0.000987368 Jy
! Total flux subtracted in 200 components = -0.000987368 Jy
! Clean residual min=-0.001693 max=0.001872 Jy/beam
! Clean residual mean=-0.000008 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.221581 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 0.221581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069895Jy  sigma=1.437856
! Fit after  self-cal, rms=0.069946Jy  sigma=1.437711
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069946Jy  sigma=1.437711
! Fit after  self-cal, rms=0.071295Jy  sigma=1.431794
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.175 mas, bmaj=1.432 mas, bpa=-43.18 degrees
! Estimated noise=0.214776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000707715 Jy
! Component: 100  -  total flux cleaned = -0.000826554 Jy
! Component: 150  -  total flux cleaned = -0.00100439 Jy
! Component: 200  -  total flux cleaned = -0.00113455 Jy
! Total flux subtracted in 200 components = -0.00113455 Jy
! Clean residual min=-0.001420 max=0.001401 Jy/beam
! Clean residual mean=-0.000006 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.220446 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 80 components and 0.220446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071272Jy  sigma=1.431008
! Fit after  self-cal, rms=0.071297Jy  sigma=1.430940
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.4, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000705858 Jy
! Component: 100  -  total flux cleaned = 0.000709115 Jy
! Component: 150  -  total flux cleaned = 0.000728669 Jy
! Component: 200  -  total flux cleaned = 0.000672598 Jy
! Total flux subtracted in 200 components = 0.000672598 Jy
! Clean residual min=-0.001260 max=0.001114 Jy/beam
! Clean residual mean=-0.000007 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.221119 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 101 components and 0.221119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071270Jy  sigma=1.430284
! Fit after  self-cal, rms=0.071267Jy  sigma=1.430250
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071267Jy  sigma=1.430250
! Fit after  self-cal, rms=0.071316Jy  sigma=1.430127
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.174 mas, bmaj=1.432 mas, bpa=-43.1 degrees
! Estimated noise=0.214496 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000175152 Jy
! Component: 100  -  total flux cleaned = -0.000267773 Jy
! Component: 150  -  total flux cleaned = -0.000348407 Jy
! Component: 200  -  total flux cleaned = -0.000407882 Jy
! Total flux subtracted in 200 components = -0.000407882 Jy
! Clean residual min=-0.001195 max=0.001067 Jy/beam
! Clean residual mean=-0.000005 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.220711 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 115 components and 0.220711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071306Jy  sigma=1.429885
! Fit after  self-cal, rms=0.071308Jy  sigma=1.429877
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.81258e-05 Jy
! Component: 100  -  total flux cleaned = -3.47899e-06 Jy
! Component: 150  -  total flux cleaned = -5.52745e-05 Jy
! Component: 200  -  total flux cleaned = -6.76847e-05 Jy
! Total flux subtracted in 200 components = -6.76847e-05 Jy
! Clean residual min=-0.001175 max=0.001072 Jy/beam
! Clean residual mean=-0.000005 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.220643 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 125 components and 0.220643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071303Jy  sigma=1.429758
! Fit after  self-cal, rms=0.071303Jy  sigma=1.429752
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071303Jy  sigma=1.429752
! Fit after  self-cal, rms=0.071339Jy  sigma=1.429730
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.411 mas, bmaj=2.516 mas, bpa=-50.16 degrees
! Estimated noise=0.257865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.01705e-05 Jy
! Component: 100  -  total flux cleaned = -0.00015252 Jy
! Component: 150  -  total flux cleaned = -0.00024286 Jy
! Component: 200  -  total flux cleaned = -0.000282234 Jy
! Total flux subtracted in 200 components = -0.000282234 Jy
! Clean residual min=-0.001217 max=0.001082 Jy/beam
! Clean residual mean=-0.000009 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.220361 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 138 components and 0.220361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071338Jy  sigma=1.429649
! Fit after  self-cal, rms=0.071337Jy  sigma=1.429639
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.53766e-05 Jy
! Component: 100  -  total flux cleaned = 2.56924e-05 Jy
! Component: 150  -  total flux cleaned = 8.54352e-06 Jy
! Component: 200  -  total flux cleaned = -1.51292e-05 Jy
! Total flux subtracted in 200 components = -1.51292e-05 Jy
! Clean residual min=-0.001176 max=0.001079 Jy/beam
! Clean residual mean=-0.000009 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.220346 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 145 components and 0.220346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071336Jy  sigma=1.429610
! Fit after  self-cal, rms=0.071335Jy  sigma=1.429603
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.173 mas, bmaj=1.432 mas, bpa=-43.08 degrees
! Estimated noise=0.214415 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.173 x 1.432 at -43.08 degrees (North through East)
! Clean map  min=-0.0011482  max=0.17497 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8342 mas, bmaj=1.196 mas, bpa=-39.72 degrees
! Estimated noise=0.471395 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131339 Jy
! Component: 100  -  total flux cleaned = 0.167868 Jy
! Component: 150  -  total flux cleaned = 0.184218 Jy
! Component: 200  -  total flux cleaned = 0.193837 Jy
! Total flux subtracted in 200 components = 0.193837 Jy
! Clean residual min=-0.003608 max=0.004998 Jy/beam
! Clean residual mean=0.000009 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.193837 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.193837 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.173 mas, bmaj=1.432 mas, bpa=-43.08 degrees
! Estimated noise=0.214415 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00917583 Jy
! Component: 100  -  total flux cleaned = 0.0145288 Jy
! Component: 150  -  total flux cleaned = 0.0179634 Jy
! Component: 200  -  total flux cleaned = 0.0203898 Jy
! Total flux subtracted in 200 components = 0.0203898 Jy
! Clean residual min=-0.001670 max=0.002058 Jy/beam
! Clean residual mean=0.000003 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.214227 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 46 components and 0.214227 Jy
! Inverting map 
! Added new window around map position (-2.8, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203577 Jy
! Component: 100  -  total flux cleaned = 0.00348165 Jy
! Component: 150  -  total flux cleaned = 0.00460714 Jy
! Component: 200  -  total flux cleaned = 0.00522975 Jy
! Total flux subtracted in 200 components = 0.00522975 Jy
! Clean residual min=-0.001302 max=0.001096 Jy/beam
! Clean residual mean=-0.000002 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.219456 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 65 components and 0.219456 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.411 mas, bmaj=2.516 mas, bpa=-50.16 degrees
! Estimated noise=0.257865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000600841 Jy
! Component: 100  -  total flux cleaned = 0.000843954 Jy
! Component: 150  -  total flux cleaned = 0.000952327 Jy
! Component: 200  -  total flux cleaned = 0.000953004 Jy
! Total flux subtracted in 200 components = 0.000953004 Jy
! Clean residual min=-0.001275 max=0.001119 Jy/beam
! Clean residual mean=-0.000008 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.220409 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.60936e-05 Jy
! Component: 100  -  total flux cleaned = -1.62637e-05 Jy
! Component: 150  -  total flux cleaned = -3.037e-05 Jy
! Component: 200  -  total flux cleaned = -4.29629e-05 Jy
! Total flux subtracted in 200 components = -4.29629e-05 Jy
! Clean residual min=-0.001225 max=0.001049 Jy/beam
! Clean residual mean=-0.000009 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.220366 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 100 components and 0.220366 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.173 mas, bmaj=1.432 mas, bpa=-43.08 degrees
! Estimated noise=0.214415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132209 Jy
! Component: 100  -  total flux cleaned = -0.000243192 Jy
! Component: 150  -  total flux cleaned = -0.000244192 Jy
! Component: 200  -  total flux cleaned = -0.00024418 Jy
! Total flux subtracted in 200 components = -0.00024418 Jy
! Clean residual min=-0.001141 max=0.001082 Jy/beam
! Clean residual mean=-0.000004 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.220122 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.220122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071338Jy  sigma=1.429692
! Fit after  self-cal, rms=0.071334Jy  sigma=1.429618
wmodel /J2233+4245_X_map.mod
! wmodel: Unable to open new model file: /J2233+4245_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2233+4245_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.173 x 1.432 at -43.08 degrees (North through East)
! Clean map  min=-0.0010497  max=0.17559 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2233+4245_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.175594 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000255942 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.437275 0.437275 0.874549 1.7491 3.4982 6.99639 13.9928 27.9856 55.9711
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.175 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  686.067 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2233+4245_X_dfm.log closed on Thu May 19 23:41:14 2016