! Started logfile: /scr/pima/bg219i_uvs/J2230+6946_X_dfm.log on Thu May 19 23:41:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2230+6946_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2230+6946_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.828571 visibilities/baseline/integration-bin.
! Found source: J2230+6946
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3132 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2230+6946_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.269404Jy  sigma=21.532080
! Fit after  self-cal, rms=0.399204Jy  sigma=7.079750
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5958 mas, bmaj=2.79 mas, bpa=9.09 degrees
! Estimated noise=1.20614 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.481032 Jy
! Component: 100  -  total flux cleaned = 0.679009 Jy
! Total flux subtracted in 100 components = 0.679009 Jy
! Clean residual min=-0.046121 max=0.095733 Jy/beam
! Clean residual mean=-0.000077 rms=0.011576 Jy/beam
! Combined flux in latest and established models = 0.679009 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.679009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.207587Jy  sigma=3.411450
! Fit after  self-cal, rms=0.205492Jy  sigma=3.384288
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112264 Jy
! Component: 100  -  total flux cleaned = 0.175523 Jy
! Total flux subtracted in 100 components = 0.175523 Jy
! Clean residual min=-0.019854 max=0.031312 Jy/beam
! Clean residual mean=-0.000030 rms=0.004723 Jy/beam
! Combined flux in latest and established models = 0.854532 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 7 components and 0.854532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.108131Jy  sigma=1.720222
! Fit after  self-cal, rms=0.107382Jy  sigma=1.708899
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0365522 Jy
! Component: 100  -  total flux cleaned = 0.0571328 Jy
! Total flux subtracted in 100 components = 0.0571328 Jy
! Clean residual min=-0.013425 max=0.017622 Jy/beam
! Clean residual mean=-0.000014 rms=0.003170 Jy/beam
! Combined flux in latest and established models = 0.911665 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.911665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091944Jy  sigma=1.396453
! Fit after  self-cal, rms=0.091848Jy  sigma=1.394780
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7203 mas, bmaj=2.7 mas, bpa=8.451 degrees
! Estimated noise=0.858476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246346 Jy
! Component: 100  -  total flux cleaned = 0.0394586 Jy
! Component: 150  -  total flux cleaned = 0.0449785 Jy
! Component: 200  -  total flux cleaned = 0.0477301 Jy
! Total flux subtracted in 200 components = 0.0477301 Jy
! Clean residual min=-0.010301 max=0.013131 Jy/beam
! Clean residual mean=0.000000 rms=0.002639 Jy/beam
! Combined flux in latest and established models = 0.959395 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 37 components and 0.959395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083862Jy  sigma=1.250356
! Fit after  self-cal, rms=0.083609Jy  sigma=1.244173
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7203 x 2.7 at 8.451 degrees (North through East)
! Clean map  min=-0.0093153  max=0.67043 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.98     KP        0.99     
!   LA        1.03     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        0.97     KP        0.98     
!   LA        1.03     MK        1.03     NL        0.99     OV        0.98     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        0.96     KP        1.00     
!   LA        1.02     MK        1.02     NL        1.00     OV        0.95     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        0.98     KP        1.01     
!   LA        0.99     MK        1.02     NL        1.00     OV        0.97     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.99     KP        1.00     
!   LA        1.02     MK        1.01     NL        1.00     OV        0.98     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        0.99     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.96     KP        0.99     
!   LA        1.01     MK        1.03     NL        1.01     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        0.98     KP        1.00     
!   LA        1.01     MK        1.02     NL        0.98     OV        0.96     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.96     KP        0.99     
!   LA        1.01     MK        0.99     NL        1.01     OV        0.96     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.11     HN        0.98     KP        1.01     
!   LA        1.01     MK        1.02     NL        1.00     OV        0.96     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        1.00     KP        0.99     
!   LA        1.02     MK        1.06     NL        1.00     OV        0.96     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        0.99     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.00     OV        0.97     
!   PT        0.97     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.083609Jy  sigma=1.244173
! Fit after  self-cal, rms=0.078241Jy  sigma=1.149908
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7181 mas, bmaj=2.704 mas, bpa=8.426 degrees
! Estimated noise=0.849175 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024044 Jy
! Component: 100  -  total flux cleaned = 5.75399e-05 Jy
! Component: 150  -  total flux cleaned = -0.000398497 Jy
! Component: 200  -  total flux cleaned = -0.000528714 Jy
! Total flux subtracted in 200 components = -0.000528714 Jy
! Clean residual min=-0.006325 max=0.005298 Jy/beam
! Clean residual mean=0.000004 rms=0.001255 Jy/beam
! Combined flux in latest and established models = 0.958866 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 53 components and 0.958866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077357Jy  sigma=1.136886
! Fit after  self-cal, rms=0.077344Jy  sigma=1.136393
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077344Jy  sigma=1.136393
! Fit after  self-cal, rms=0.077264Jy  sigma=1.134917
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7171 mas, bmaj=2.704 mas, bpa=8.419 degrees
! Estimated noise=0.848206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0016858 Jy
! Component: 100  -  total flux cleaned = -0.00226997 Jy
! Component: 150  -  total flux cleaned = -0.00266335 Jy
! Component: 200  -  total flux cleaned = -0.00290726 Jy
! Total flux subtracted in 200 components = -0.00290726 Jy
! Clean residual min=-0.005902 max=0.004989 Jy/beam
! Clean residual mean=0.000004 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.955959 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 63 components and 0.955959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076853Jy  sigma=1.130517
! Fit after  self-cal, rms=0.076835Jy  sigma=1.130276
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000512426 Jy
! Component: 100  -  total flux cleaned = -0.000650869 Jy
! Component: 150  -  total flux cleaned = -0.000837876 Jy
! Component: 200  -  total flux cleaned = -0.000951108 Jy
! Total flux subtracted in 200 components = -0.000951108 Jy
! Clean residual min=-0.005794 max=0.004982 Jy/beam
! Clean residual mean=0.000004 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 0.955008 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 75 components and 0.955008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076693Jy  sigma=1.128954
! Fit after  self-cal, rms=0.076685Jy  sigma=1.128904
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076685Jy  sigma=1.128904
! Fit after  self-cal, rms=0.076628Jy  sigma=1.127494
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7167 mas, bmaj=2.704 mas, bpa=8.403 degrees
! Estimated noise=0.846959 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00214092 Jy
! Component: 100  -  total flux cleaned = -0.00304156 Jy
! Component: 150  -  total flux cleaned = -0.00329596 Jy
! Component: 200  -  total flux cleaned = -0.0034109 Jy
! Total flux subtracted in 200 components = -0.0034109 Jy
! Clean residual min=-0.005472 max=0.004700 Jy/beam
! Clean residual mean=0.000004 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.951597 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 84 components and 0.951597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076420Jy  sigma=1.125966
! Fit after  self-cal, rms=0.076411Jy  sigma=1.125829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000243545 Jy
! Component: 100  -  total flux cleaned = -0.000390773 Jy
! Component: 150  -  total flux cleaned = -0.000527405 Jy
! Component: 200  -  total flux cleaned = -0.000655436 Jy
! Total flux subtracted in 200 components = -0.000655436 Jy
! Clean residual min=-0.005372 max=0.004683 Jy/beam
! Clean residual mean=0.000003 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.950942 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 89 components and 0.950942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076329Jy  sigma=1.125189
! Fit after  self-cal, rms=0.076324Jy  sigma=1.125149
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076324Jy  sigma=1.125149
! Fit after  self-cal, rms=0.076284Jy  sigma=1.124315
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.832 mas, bmaj=2.854 mas, bpa=7.005 degrees
! Estimated noise=1.26396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00232087 Jy
! Component: 100  -  total flux cleaned = -0.00225421 Jy
! Component: 150  -  total flux cleaned = -0.00255139 Jy
! Component: 200  -  total flux cleaned = -0.00279837 Jy
! Total flux subtracted in 200 components = -0.00279837 Jy
! Clean residual min=-0.004958 max=0.004569 Jy/beam
! Clean residual mean=0.000011 rms=0.001153 Jy/beam
! Combined flux in latest and established models = 0.948143 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 0.948143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076205Jy  sigma=1.123740
! Fit after  self-cal, rms=0.076207Jy  sigma=1.123594
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000264802 Jy
! Component: 100  -  total flux cleaned = -0.000420618 Jy
! Component: 150  -  total flux cleaned = -0.000595233 Jy
! Component: 200  -  total flux cleaned = -0.00072275 Jy
! Total flux subtracted in 200 components = -0.00072275 Jy
! Clean residual min=-0.004765 max=0.004537 Jy/beam
! Clean residual mean=0.000011 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.94742 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 108 components and 0.94742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076205Jy  sigma=1.123802
! Fit after  self-cal, rms=0.076208Jy  sigma=1.123736
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7165 mas, bmaj=2.704 mas, bpa=8.388 degrees
! Estimated noise=0.845769 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7165 x 2.704 at 8.388 degrees (North through East)
! Clean map  min=-0.0044067  max=0.66675 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076208Jy  sigma=1.123736
! Fit after  self-cal, rms=0.073418Jy  sigma=1.071842
! Inverting map and beam 
! Estimated beam: bmin=0.7155 mas, bmaj=2.703 mas, bpa=8.378 degrees
! Estimated noise=0.840174 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00453812 Jy
! Component: 100  -  total flux cleaned = -0.0055875 Jy
! Component: 150  -  total flux cleaned = -0.00551087 Jy
! Component: 200  -  total flux cleaned = -0.00517306 Jy
! Total flux subtracted in 200 components = -0.00517306 Jy
! Clean residual min=-0.004984 max=0.004772 Jy/beam
! Clean residual mean=0.000001 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 0.942247 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 123 components and 0.942247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072966Jy  sigma=1.068001
! Fit after  self-cal, rms=0.072950Jy  sigma=1.067828
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166245 Jy
! Component: 100  -  total flux cleaned = -0.000334474 Jy
! Component: 150  -  total flux cleaned = -0.000542844 Jy
! Component: 200  -  total flux cleaned = -0.000734769 Jy
! Total flux subtracted in 200 components = -0.000734769 Jy
! Clean residual min=-0.004891 max=0.004733 Jy/beam
! Clean residual mean=0.000001 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.941513 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 133 components and 0.941513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072840Jy  sigma=1.067027
! Fit after  self-cal, rms=0.072834Jy  sigma=1.066975
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072834Jy  sigma=1.066975
! Fit after  self-cal, rms=0.072397Jy  sigma=1.063324
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5926 mas, bmaj=2.795 mas, bpa=8.996 degrees
! Estimated noise=1.17125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.468455 Jy
! Component: 100  -  total flux cleaned = 0.665866 Jy
! Component: 150  -  total flux cleaned = 0.776242 Jy
! Component: 200  -  total flux cleaned = 0.83894 Jy
! Total flux subtracted in 200 components = 0.83894 Jy
! Clean residual min=-0.013936 max=0.030921 Jy/beam
! Clean residual mean=-0.000029 rms=0.004048 Jy/beam
! Combined flux in latest and established models = 0.838941 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.838941 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.715 mas, bmaj=2.702 mas, bpa=8.371 degrees
! Estimated noise=0.834805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0453865 Jy
! Component: 100  -  total flux cleaned = 0.0673207 Jy
! Component: 150  -  total flux cleaned = 0.0789956 Jy
! Component: 200  -  total flux cleaned = 0.0849959 Jy
! Total flux subtracted in 200 components = 0.0849959 Jy
! Clean residual min=-0.005707 max=0.006970 Jy/beam
! Clean residual mean=-0.000003 rms=0.001338 Jy/beam
! Combined flux in latest and established models = 0.923936 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 24 components and 0.923936 Jy
! Inverting map 
! Added new window around map position (-1, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00460613 Jy
! Component: 100  -  total flux cleaned = 0.00590929 Jy
! Component: 150  -  total flux cleaned = 0.00697382 Jy
! Component: 200  -  total flux cleaned = 0.00774274 Jy
! Total flux subtracted in 200 components = 0.00774274 Jy
! Clean residual min=-0.004392 max=0.004213 Jy/beam
! Clean residual mean=-0.000001 rms=0.001026 Jy/beam
! Combined flux in latest and established models = 0.931679 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 48 components and 0.931679 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.828 mas, bmaj=2.85 mas, bpa=6.928 degrees
! Estimated noise=1.25249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022165 Jy
! Component: 100  -  total flux cleaned = 0.00263102 Jy
! Component: 150  -  total flux cleaned = 0.0024043 Jy
! Component: 200  -  total flux cleaned = 0.0022096 Jy
! Total flux subtracted in 200 components = 0.0022096 Jy
! Clean residual min=-0.003435 max=0.004018 Jy/beam
! Clean residual mean=0.000002 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 0.933889 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271792 Jy
! Component: 100  -  total flux cleaned = -0.000465079 Jy
! Component: 150  -  total flux cleaned = -0.000595951 Jy
! Component: 200  -  total flux cleaned = -0.000675061 Jy
! Total flux subtracted in 200 components = -0.000675061 Jy
! Clean residual min=-0.003478 max=0.003823 Jy/beam
! Clean residual mean=0.000001 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 0.933214 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 98 components and 0.933214 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.715 mas, bmaj=2.702 mas, bpa=8.371 degrees
! Estimated noise=0.834805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000770905 Jy
! Component: 100  -  total flux cleaned = -0.0010569 Jy
! Component: 150  -  total flux cleaned = -0.00112059 Jy
! Component: 200  -  total flux cleaned = -0.00117678 Jy
! Total flux subtracted in 200 components = -0.00117678 Jy
! Clean residual min=-0.004209 max=0.003923 Jy/beam
! Clean residual mean=-0.000000 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.932037 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 113 components and 0.932037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071769Jy  sigma=1.057603
! Fit after  self-cal, rms=0.071759Jy  sigma=1.057456
wmodel /J2230+6946_X_map.mod
! wmodel: Unable to open new model file: /J2230+6946_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2230+6946_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.715 x 2.702 at 8.371 degrees (North through East)
! Clean map  min=-0.0037971  max=0.66012 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2230+6946_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.660123 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000892355 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.40554 0.40554 0.81108 1.62216 3.24432 6.48864 12.9773 25.9546 51.9091
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0026 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.66 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  739.754 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2230+6946_X_dfm.log closed on Thu May 19 23:41:05 2016