! Started logfile: /scr/pima/bg219i_uvs/J2230+6946_S_dfm.log on Thu May 19 23:40:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J2230+6946_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2230+6946_S_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2230+6946
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1260 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2230+6946_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.197461Jy  sigma=20.494109
! Fit after  self-cal, rms=0.417026Jy  sigma=6.293214
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.455 mas, bmaj=10.24 mas, bpa=8.329 degrees
! Estimated noise=1.51652 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.508937 Jy
! Component: 100  -  total flux cleaned = 0.619918 Jy
! Total flux subtracted in 100 components = 0.619918 Jy
! Clean residual min=-0.025404 max=0.041172 Jy/beam
! Clean residual mean=0.000054 rms=0.007362 Jy/beam
! Combined flux in latest and established models = 0.619918 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.619918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203486Jy  sigma=2.815288
! Fit after  self-cal, rms=0.201491Jy  sigma=2.802114
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.849 mas, bmaj=10.14 mas, bpa=8.251 degrees
! Estimated noise=1.31312 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-56, -43).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0550604 Jy
! Component: 100  -  total flux cleaned = 0.0854377 Jy
! Component: 150  -  total flux cleaned = 0.104455 Jy
! Component: 200  -  total flux cleaned = 0.11606 Jy
! Total flux subtracted in 200 components = 0.11606 Jy
! Clean residual min=-0.019678 max=0.030458 Jy/beam
! Clean residual mean=0.000035 rms=0.005200 Jy/beam
! Combined flux in latest and established models = 0.735978 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 39 components and 0.735978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181676Jy  sigma=2.507173
! Fit after  self-cal, rms=0.180696Jy  sigma=2.488572
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.849 x 10.14 at 8.251 degrees (North through East)
! Clean map  min=-0.0196  max=0.63471 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        1.01     
!   LA        1.08     MK        1.02     NL        0.96     OV        0.94     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.04     KP        0.97     
!   LA        1.10     MK        0.98     NL        0.94     OV        0.93     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.01     KP        0.96     
!   LA        1.16     MK        1.01     NL        0.95     OV        0.93     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.95     
!   LA        1.10     MK        0.99     NL        0.96     OV        0.96     
!   PT        0.93     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.180696Jy  sigma=2.488572
! Fit after  self-cal, rms=0.182831Jy  sigma=2.382089
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.864 mas, bmaj=10.17 mas, bpa=8.248 degrees
! Estimated noise=1.28515 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0063096 Jy
! Component: 100  -  total flux cleaned = -0.00790147 Jy
! Component: 150  -  total flux cleaned = -0.00848605 Jy
! Component: 200  -  total flux cleaned = -0.00865891 Jy
! Total flux subtracted in 200 components = -0.00865891 Jy
! Clean residual min=-0.014070 max=0.012214 Jy/beam
! Clean residual mean=0.000002 rms=0.002757 Jy/beam
! Combined flux in latest and established models = 0.727319 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 59 components and 0.727319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181850Jy  sigma=2.377028
! Fit after  self-cal, rms=0.181839Jy  sigma=2.376740
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181839Jy  sigma=2.376740
! Fit after  self-cal, rms=0.180790Jy  sigma=2.373491
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.868 mas, bmaj=10.17 mas, bpa=8.23 degrees
! Estimated noise=1.27231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00680327 Jy
! Component: 100  -  total flux cleaned = -0.00731491 Jy
! Component: 150  -  total flux cleaned = -0.00745283 Jy
! Component: 200  -  total flux cleaned = -0.00745604 Jy
! Total flux subtracted in 200 components = -0.00745604 Jy
! Clean residual min=-0.012986 max=0.011738 Jy/beam
! Clean residual mean=0.000001 rms=0.002661 Jy/beam
! Combined flux in latest and established models = 0.719863 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 66 components and 0.719863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179925Jy  sigma=2.372340
! Fit after  self-cal, rms=0.179928Jy  sigma=2.372232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000404282 Jy
! Component: 100  -  total flux cleaned = 0.000754343 Jy
! Component: 150  -  total flux cleaned = 0.000752837 Jy
! Component: 200  -  total flux cleaned = 0.000855072 Jy
! Total flux subtracted in 200 components = 0.000855072 Jy
! Clean residual min=-0.012370 max=0.011615 Jy/beam
! Clean residual mean=0.000000 rms=0.002626 Jy/beam
! Combined flux in latest and established models = 0.720718 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 78 components and 0.720718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179773Jy  sigma=2.369947
! Fit after  self-cal, rms=0.179775Jy  sigma=2.369896
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179775Jy  sigma=2.369896
! Fit after  self-cal, rms=0.178520Jy  sigma=2.365637
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.871 mas, bmaj=10.17 mas, bpa=8.213 degrees
! Estimated noise=1.25756 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00705853 Jy
! Component: 100  -  total flux cleaned = -0.00870431 Jy
! Component: 150  -  total flux cleaned = -0.0089076 Jy
! Component: 200  -  total flux cleaned = -0.008907 Jy
! Total flux subtracted in 200 components = -0.008907 Jy
! Clean residual min=-0.011728 max=0.011294 Jy/beam
! Clean residual mean=-0.000000 rms=0.002562 Jy/beam
! Combined flux in latest and established models = 0.711811 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 81 components and 0.711811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177664Jy  sigma=2.367688
! Fit after  self-cal, rms=0.177669Jy  sigma=2.367656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.68136e-05 Jy
! Component: 100  -  total flux cleaned = -8.02531e-05 Jy
! Component: 150  -  total flux cleaned = -0.000248865 Jy
! Component: 200  -  total flux cleaned = -0.000407696 Jy
! Total flux subtracted in 200 components = -0.000407696 Jy
! Clean residual min=-0.011441 max=0.011297 Jy/beam
! Clean residual mean=-0.000000 rms=0.002545 Jy/beam
! Combined flux in latest and established models = 0.711403 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 84 components and 0.711403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177572Jy  sigma=2.366457
! Fit after  self-cal, rms=0.177574Jy  sigma=2.366436
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177574Jy  sigma=2.366436
! Fit after  self-cal, rms=0.176174Jy  sigma=2.362043
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.809 mas, bmaj=10.84 mas, bpa=6.169 degrees
! Estimated noise=1.67592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00829334 Jy
! Component: 100  -  total flux cleaned = -0.00963607 Jy
! Component: 150  -  total flux cleaned = -0.0110388 Jy
! Component: 200  -  total flux cleaned = -0.0113615 Jy
! Total flux subtracted in 200 components = -0.0113615 Jy
! Clean residual min=-0.010085 max=0.012166 Jy/beam
! Clean residual mean=0.000001 rms=0.003134 Jy/beam
! Combined flux in latest and established models = 0.700041 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 109 components and 0.700041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175441Jy  sigma=2.366938
! Fit after  self-cal, rms=0.175442Jy  sigma=2.366705
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000525763 Jy
! Component: 100  -  total flux cleaned = -0.000702673 Jy
! Component: 150  -  total flux cleaned = -0.00086019 Jy
! Component: 200  -  total flux cleaned = -0.00100133 Jy
! Total flux subtracted in 200 components = -0.00100133 Jy
! Clean residual min=-0.010061 max=0.012356 Jy/beam
! Clean residual mean=0.000002 rms=0.003111 Jy/beam
! Combined flux in latest and established models = 0.69904 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 120 components and 0.69904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175419Jy  sigma=2.367997
! Fit after  self-cal, rms=0.175420Jy  sigma=2.367957
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.873 mas, bmaj=10.17 mas, bpa=8.207 degrees
! Estimated noise=1.24215 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.873 x 10.17 at 8.207 degrees (North through East)
! Clean map  min=-0.010343  max=0.59979 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175420Jy  sigma=2.367957
! Fit after  self-cal, rms=0.175420Jy  sigma=2.367957
! Inverting map and beam 
! Estimated beam: bmin=2.873 mas, bmaj=10.17 mas, bpa=8.207 degrees
! Estimated noise=1.24215 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.98704e-05 Jy
! Component: 100  -  total flux cleaned = -0.000391835 Jy
! Component: 150  -  total flux cleaned = -0.000497058 Jy
! Component: 200  -  total flux cleaned = -0.000676258 Jy
! Total flux subtracted in 200 components = -0.000676258 Jy
! Clean residual min=-0.010966 max=0.010682 Jy/beam
! Clean residual mean=0.000000 rms=0.002484 Jy/beam
! Combined flux in latest and established models = 0.698364 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 136 components and 0.698364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175232Jy  sigma=2.366469
! Fit after  self-cal, rms=0.175230Jy  sigma=2.366446
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173545 Jy
! Component: 100  -  total flux cleaned = 0.000254117 Jy
! Component: 150  -  total flux cleaned = 0.000251119 Jy
! Component: 200  -  total flux cleaned = 0.000321715 Jy
! Total flux subtracted in 200 components = 0.000321715 Jy
! Clean residual min=-0.010831 max=0.010798 Jy/beam
! Clean residual mean=0.000000 rms=0.002476 Jy/beam
! Combined flux in latest and established models = 0.698685 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 145 components and 0.698685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175158Jy  sigma=2.365307
! Fit after  self-cal, rms=0.175158Jy  sigma=2.365295
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175158Jy  sigma=2.365295
! Fit after  self-cal, rms=0.175158Jy  sigma=2.365295
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.475 mas, bmaj=10.26 mas, bpa=8.256 degrees
! Estimated noise=1.43826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.482608 Jy
! Component: 100  -  total flux cleaned = 0.588558 Jy
! Component: 150  -  total flux cleaned = 0.623221 Jy
! Component: 200  -  total flux cleaned = 0.6436 Jy
! Total flux subtracted in 200 components = 0.6436 Jy
! Clean residual min=-0.016333 max=0.017798 Jy/beam
! Clean residual mean=0.000019 rms=0.003605 Jy/beam
! Combined flux in latest and established models = 0.6436 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.6436 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.873 mas, bmaj=10.17 mas, bpa=8.207 degrees
! Estimated noise=1.24215 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (55, 44).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0216875 Jy
! Component: 100  -  total flux cleaned = 0.0359593 Jy
! Component: 150  -  total flux cleaned = 0.0446019 Jy
! Component: 200  -  total flux cleaned = 0.0501394 Jy
! Total flux subtracted in 200 components = 0.0501394 Jy
! Clean residual min=-0.012010 max=0.011684 Jy/beam
! Clean residual mean=0.000006 rms=0.002598 Jy/beam
! Combined flux in latest and established models = 0.693739 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 66 components and 0.693739 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.809 mas, bmaj=10.84 mas, bpa=6.169 degrees
! Estimated noise=1.67592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00998797 Jy
! Component: 100  -  total flux cleaned = 0.0133625 Jy
! Component: 150  -  total flux cleaned = 0.0143127 Jy
! Component: 200  -  total flux cleaned = 0.0144798 Jy
! Total flux subtracted in 200 components = 0.0144798 Jy
! Clean residual min=-0.009436 max=0.010742 Jy/beam
! Clean residual mean=-0.000001 rms=0.002689 Jy/beam
! Combined flux in latest and established models = 0.708219 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000145474 Jy
! Component: 100  -  total flux cleaned = -0.000400634 Jy
! Component: 150  -  total flux cleaned = -0.00039963 Jy
! Component: 200  -  total flux cleaned = -0.000505905 Jy
! Total flux subtracted in 200 components = -0.000505905 Jy
! Clean residual min=-0.009141 max=0.010009 Jy/beam
! Clean residual mean=-0.000001 rms=0.002541 Jy/beam
! Combined flux in latest and established models = 0.707713 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 144 components and 0.707713 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.873 mas, bmaj=10.17 mas, bpa=8.207 degrees
! Estimated noise=1.24215 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00140787 Jy
! Component: 100  -  total flux cleaned = -0.000887814 Jy
! Component: 150  -  total flux cleaned = -0.00104694 Jy
! Component: 200  -  total flux cleaned = -0.00118395 Jy
! Total flux subtracted in 200 components = -0.00118395 Jy
! Clean residual min=-0.010725 max=0.009104 Jy/beam
! Clean residual mean=-0.000003 rms=0.002241 Jy/beam
! Combined flux in latest and established models = 0.706529 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 163 components and 0.706529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173815Jy  sigma=2.360000
! Fit after  self-cal, rms=0.173526Jy  sigma=2.353362
wmodel /J2230+6946_S_map.mod
! wmodel: Unable to open new model file: /J2230+6946_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2230+6946_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.873 x 10.17 at 8.207 degrees (North through East)
! Clean map  min=-0.0093994  max=0.59631 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2230+6946_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.596311 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00212272 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.06793 1.06793 2.13585 4.2717 8.5434 17.0868 34.1736 68.3472
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0063 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.596 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  280.918 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2230+6946_S_dfm.log closed on Thu May 19 23:41:01 2016