! Started logfile: /scr/pima/bg219i_uvs/J2228+4419_X_dfm.log on Thu May 19 23:40:54 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2228+4419_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2228+4419_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.79922 visibilities/baseline/integration-bin.
! Found source: J2228+4419
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24600 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2228+4419_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006692Jy  sigma=23.132867
! Fit after  self-cal, rms=0.881364Jy  sigma=20.126658
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8326 mas, bmaj=1.133 mas, bpa=-43.6 degrees
! Estimated noise=0.49097 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0867239 Jy
! Component: 100  -  total flux cleaned = 0.113008 Jy
! Total flux subtracted in 100 components = 0.113008 Jy
! Clean residual min=-0.004854 max=0.010715 Jy/beam
! Clean residual mean=0.000021 rms=0.001355 Jy/beam
! Combined flux in latest and established models = 0.113008 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.113008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072779Jy  sigma=1.522148
! Fit after  self-cal, rms=0.072515Jy  sigma=1.517024
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116092 Jy
! Component: 100  -  total flux cleaned = 0.0172893 Jy
! Total flux subtracted in 100 components = 0.0172893 Jy
! Clean residual min=-0.004217 max=0.010237 Jy/beam
! Clean residual mean=0.000012 rms=0.001078 Jy/beam
! Combined flux in latest and established models = 0.130298 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.130298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069823Jy  sigma=1.435691
! Fit after  self-cal, rms=0.069798Jy  sigma=1.434766
! Inverting map 
! Added new window around map position (4.4, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00858552 Jy
! Component: 100  -  total flux cleaned = 0.0131506 Jy
! Total flux subtracted in 100 components = 0.0131506 Jy
! Clean residual min=-0.003545 max=0.003796 Jy/beam
! Clean residual mean=0.000009 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.143448 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 26 components and 0.143448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068459Jy  sigma=1.397199
! Fit after  self-cal, rms=0.068404Jy  sigma=1.395260
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=1.472 mas, bpa=-40.19 degrees
! Estimated noise=0.205817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00618834 Jy
! Component: 100  -  total flux cleaned = 0.00995873 Jy
! Component: 150  -  total flux cleaned = 0.0124189 Jy
! Component: 200  -  total flux cleaned = 0.0140688 Jy
! Total flux subtracted in 200 components = 0.0140688 Jy
! Clean residual min=-0.002255 max=0.002519 Jy/beam
! Clean residual mean=0.000009 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.157517 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 42 components and 0.157517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067891Jy  sigma=1.377626
! Fit after  self-cal, rms=0.067872Jy  sigma=1.376868
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.147 x 1.472 at -40.19 degrees (North through East)
! Clean map  min=-0.0020419  max=0.11893 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.01     KP        1.00     
!   LA        0.95     MK        0.97     NL        0.99     OV        0.98     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.04     KP        0.98     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.05     KP        1.01     
!   LA        0.95     MK        1.00     NL        1.03     OV        0.96     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.01     KP        1.01     
!   LA        0.96     MK        0.97     NL        1.01     OV        0.95     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.98     KP        1.01     
!   LA        0.99     MK        0.92     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.08     HN        1.01     KP        1.01     
!   LA        0.98     MK        0.96     NL        1.00     OV        0.97     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.08     KP        0.99     
!   LA        0.98     MK        1.07     NL        1.02     OV        0.95     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.99     KP        1.00     
!   LA        0.95     MK        1.06     NL        1.00     OV        0.95     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        0.99     KP        1.01     
!   LA        0.96     MK        0.95     NL        1.00     OV        0.94     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        1.05     KP        1.00     
!   LA        0.97     MK        0.94     NL        0.97     OV        0.98     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.05     KP        1.02     
!   LA        0.98     MK        1.03     NL        1.03     OV        0.96     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.11     HN        1.05     KP        1.01     
!   LA        0.98     MK        0.99     NL        1.02     OV        0.94     
!   PT        0.95     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.067872Jy  sigma=1.376868
! Fit after  self-cal, rms=0.068854Jy  sigma=1.370453
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.148 mas, bmaj=1.478 mas, bpa=-40.13 degrees
! Estimated noise=0.204347 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000671602 Jy
! Component: 100  -  total flux cleaned = 0.000746217 Jy
! Component: 150  -  total flux cleaned = 0.000889732 Jy
! Component: 200  -  total flux cleaned = 0.00101037 Jy
! Total flux subtracted in 200 components = 0.00101037 Jy
! Clean residual min=-0.001812 max=0.001723 Jy/beam
! Clean residual mean=-0.000004 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.158527 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.158527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068816Jy  sigma=1.369545
! Fit after  self-cal, rms=0.068872Jy  sigma=1.369364
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068872Jy  sigma=1.369364
! Fit after  self-cal, rms=0.070416Jy  sigma=1.365627
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.15 mas, bmaj=1.472 mas, bpa=-40.48 degrees
! Estimated noise=0.204668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000472949 Jy
! Component: 100  -  total flux cleaned = 0.000561231 Jy
! Component: 150  -  total flux cleaned = 0.000610178 Jy
! Component: 200  -  total flux cleaned = 0.000633058 Jy
! Total flux subtracted in 200 components = 0.000633058 Jy
! Clean residual min=-0.001416 max=0.001542 Jy/beam
! Clean residual mean=0.000000 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.15916 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 0.15916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070411Jy  sigma=1.365454
! Fit after  self-cal, rms=0.070447Jy  sigma=1.365386
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-31.4, -17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110581 Jy
! Component: 100  -  total flux cleaned = 0.00121617 Jy
! Component: 150  -  total flux cleaned = 0.00123749 Jy
! Component: 200  -  total flux cleaned = 0.00127194 Jy
! Total flux subtracted in 200 components = 0.00127194 Jy
! Clean residual min=-0.001372 max=0.001250 Jy/beam
! Clean residual mean=-0.000001 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.160432 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 77 components and 0.160432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070420Jy  sigma=1.364667
! Fit after  self-cal, rms=0.070418Jy  sigma=1.364617
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070418Jy  sigma=1.364617
! Fit after  self-cal, rms=0.070439Jy  sigma=1.364582
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=1.472 mas, bpa=-40.48 degrees
! Estimated noise=0.204592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247853 Jy
! Component: 100  -  total flux cleaned = 0.000279798 Jy
! Component: 150  -  total flux cleaned = 0.000294304 Jy
! Component: 200  -  total flux cleaned = 0.000267657 Jy
! Total flux subtracted in 200 components = 0.000267657 Jy
! Clean residual min=-0.001357 max=0.001232 Jy/beam
! Clean residual mean=-0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.1607 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 0.1607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070433Jy  sigma=1.364420
! Fit after  self-cal, rms=0.070434Jy  sigma=1.364413
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.29267e-05 Jy
! Component: 100  -  total flux cleaned = 4.28536e-05 Jy
! Component: 150  -  total flux cleaned = 1.97121e-05 Jy
! Component: 200  -  total flux cleaned = 1.94285e-05 Jy
! Total flux subtracted in 200 components = 1.94285e-05 Jy
! Clean residual min=-0.001352 max=0.001226 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.160719 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 87 components and 0.160719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070430Jy  sigma=1.364329
! Fit after  self-cal, rms=0.070429Jy  sigma=1.364326
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070429Jy  sigma=1.364326
! Fit after  self-cal, rms=0.070442Jy  sigma=1.364313
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.411 mas, bmaj=2.519 mas, bpa=-55.4 degrees
! Estimated noise=0.242864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.33156e-06 Jy
! Component: 100  -  total flux cleaned = -1.37049e-05 Jy
! Component: 150  -  total flux cleaned = 1.21074e-05 Jy
! Component: 200  -  total flux cleaned = 4.43314e-05 Jy
! Total flux subtracted in 200 components = 4.43314e-05 Jy
! Clean residual min=-0.001385 max=0.001313 Jy/beam
! Clean residual mean=-0.000002 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.160764 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 89 components and 0.160764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070442Jy  sigma=1.364284
! Fit after  self-cal, rms=0.070439Jy  sigma=1.364252
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.24378e-05 Jy
! Component: 100  -  total flux cleaned = -3.17681e-05 Jy
! Component: 150  -  total flux cleaned = 1.55624e-05 Jy
! Component: 200  -  total flux cleaned = 4.03627e-05 Jy
! Total flux subtracted in 200 components = 4.03627e-05 Jy
! Clean residual min=-0.001366 max=0.001288 Jy/beam
! Clean residual mean=-0.000002 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.160804 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 89 components and 0.160804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070440Jy  sigma=1.364245
! Fit after  self-cal, rms=0.070437Jy  sigma=1.364214
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=1.472 mas, bpa=-40.48 degrees
! Estimated noise=0.204615 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.149 x 1.472 at -40.48 degrees (North through East)
! Clean map  min=-0.0012291  max=0.11828 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8336 mas, bmaj=1.131 mas, bpa=-43.91 degrees
! Estimated noise=0.489273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0864023 Jy
! Component: 100  -  total flux cleaned = 0.113488 Jy
! Component: 150  -  total flux cleaned = 0.126555 Jy
! Component: 200  -  total flux cleaned = 0.13489 Jy
! Total flux subtracted in 200 components = 0.13489 Jy
! Clean residual min=-0.003486 max=0.004435 Jy/beam
! Clean residual mean=0.000010 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.13489 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.13489 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=1.472 mas, bpa=-40.48 degrees
! Estimated noise=0.204615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00907425 Jy
! Component: 100  -  total flux cleaned = 0.0144553 Jy
! Component: 150  -  total flux cleaned = 0.0178714 Jy
! Component: 200  -  total flux cleaned = 0.0202374 Jy
! Total flux subtracted in 200 components = 0.0202374 Jy
! Clean residual min=-0.001427 max=0.002148 Jy/beam
! Clean residual mean=0.000006 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.155128 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 37 components and 0.155128 Jy
! Inverting map 
! Added new window around map position (1.6, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206671 Jy
! Component: 100  -  total flux cleaned = 0.00339857 Jy
! Component: 150  -  total flux cleaned = 0.00432574 Jy
! Component: 200  -  total flux cleaned = 0.00462021 Jy
! Total flux subtracted in 200 components = 0.00462021 Jy
! Clean residual min=-0.001243 max=0.001160 Jy/beam
! Clean residual mean=-0.000000 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.159748 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 60 components and 0.159748 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.411 mas, bmaj=2.519 mas, bpa=-55.4 degrees
! Estimated noise=0.242864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000606829 Jy
! Component: 100  -  total flux cleaned = 0.000709538 Jy
! Component: 150  -  total flux cleaned = 0.000793574 Jy
! Component: 200  -  total flux cleaned = 0.000864203 Jy
! Total flux subtracted in 200 components = 0.000864203 Jy
! Clean residual min=-0.001378 max=0.001158 Jy/beam
! Clean residual mean=-0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.160612 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.04842e-05 Jy
! Component: 100  -  total flux cleaned = 9.81906e-05 Jy
! Component: 150  -  total flux cleaned = 0.000133939 Jy
! Component: 200  -  total flux cleaned = 0.0001558 Jy
! Total flux subtracted in 200 components = 0.0001558 Jy
! Clean residual min=-0.001334 max=0.001134 Jy/beam
! Clean residual mean=-0.000002 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.160768 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 92 components and 0.160768 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.149 mas, bmaj=1.472 mas, bpa=-40.48 degrees
! Estimated noise=0.204615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.4558e-05 Jy
! Component: 100  -  total flux cleaned = -0.00020948 Jy
! Component: 150  -  total flux cleaned = -0.000230939 Jy
! Component: 200  -  total flux cleaned = -0.000214402 Jy
! Total flux subtracted in 200 components = -0.000214402 Jy
! Clean residual min=-0.001189 max=0.001102 Jy/beam
! Clean residual mean=-0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.160554 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 102 components and 0.160554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070422Jy  sigma=1.363854
! Fit after  self-cal, rms=0.070414Jy  sigma=1.363713
wmodel /J2228+4419_X_map.mod
! wmodel: Unable to open new model file: /J2228+4419_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2228+4419_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.149 x 1.472 at -40.48 degrees (North through East)
! Clean map  min=-0.0011225  max=0.1183 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2228+4419_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.118302 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000263688 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.668684 0.668684 1.33737 2.67474 5.34947 10.6989 21.3979 42.7958 85.5916
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.118 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  448.642 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2228+4419_X_dfm.log closed on Thu May 19 23:40:57 2016