! Started logfile: /scr/pima/bg219i_uvs/J2226+0052_X_dfm.log on Thu May 19 23:40:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2226+0052_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2226+0052_X_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.776667 visibilities/baseline/integration-bin.
! Found source: J2226+0052
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16776 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2226+0052_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 73 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.078898Jy  sigma=21.368988
! Fit after  self-cal, rms=0.589523Jy  sigma=11.559085
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6458 mas, bmaj=1.682 mas, bpa=-2.852 degrees
! Estimated noise=0.485695 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.310079 Jy
! Component: 100  -  total flux cleaned = 0.380741 Jy
! Total flux subtracted in 100 components = 0.380741 Jy
! Clean residual min=-0.012785 max=0.025665 Jy/beam
! Clean residual mean=-0.000002 rms=0.002403 Jy/beam
! Combined flux in latest and established models = 0.380741 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.380741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093999Jy  sigma=1.785924
! Fit after  self-cal, rms=0.093995Jy  sigma=1.785840
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0273186 Jy
! Component: 100  -  total flux cleaned = 0.0415909 Jy
! Total flux subtracted in 100 components = 0.0415909 Jy
! Clean residual min=-0.008219 max=0.007483 Jy/beam
! Clean residual mean=-0.000001 rms=0.001399 Jy/beam
! Combined flux in latest and established models = 0.422332 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.422332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082509Jy  sigma=1.519249
! Fit after  self-cal, rms=0.082479Jy  sigma=1.518772
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.917 mas, bmaj=2.172 mas, bpa=-2.466 degrees
! Estimated noise=0.306692 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012427 Jy
! Component: 100  -  total flux cleaned = 0.0183217 Jy
! Component: 150  -  total flux cleaned = 0.0216275 Jy
! Component: 200  -  total flux cleaned = 0.0235469 Jy
! Total flux subtracted in 200 components = 0.0235469 Jy
! Clean residual min=-0.004731 max=0.008152 Jy/beam
! Clean residual mean=-0.000002 rms=0.001410 Jy/beam
! Combined flux in latest and established models = 0.445879 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 29 components and 0.445879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081129Jy  sigma=1.473188
! Fit after  self-cal, rms=0.081123Jy  sigma=1.473112
! Inverting map 
! Added new window around map position (-6.4, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00731461 Jy
! Component: 100  -  total flux cleaned = 0.0114999 Jy
! Component: 150  -  total flux cleaned = 0.0143022 Jy
! Component: 200  -  total flux cleaned = 0.0154241 Jy
! Total flux subtracted in 200 components = 0.0154241 Jy
! Clean residual min=-0.004047 max=0.005864 Jy/beam
! Clean residual mean=-0.000001 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.461303 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 49 components and 0.461303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080316Jy  sigma=1.459070
! Fit after  self-cal, rms=0.080249Jy  sigma=1.457405
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.917 x 2.172 at -2.466 degrees (North through East)
! Clean map  min=-0.0041957  max=0.41208 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.00     KP        0.98     
!   LA        0.98     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        0.97     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        0.96     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.98     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        1.00     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        0.98     KP        1.01     
!   LA        0.99     MK        1.02     NL        0.98     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        0.97     KP        0.99     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.99     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.97     KP        1.01     
!   LA        0.98     MK        1.01     NL        0.98     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.97     KP        0.99     
!   LA        1.00     MK        0.99     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        0.97     KP        1.00     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.98     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.09     HN        0.98     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        0.97     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.080249Jy  sigma=1.457405
! Fit after  self-cal, rms=0.080012Jy  sigma=1.435991
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9178 mas, bmaj=2.174 mas, bpa=-2.537 degrees
! Estimated noise=0.30708 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00111601 Jy
! Component: 100  -  total flux cleaned = -0.00166195 Jy
! Component: 150  -  total flux cleaned = -0.00196335 Jy
! Component: 200  -  total flux cleaned = -0.00221341 Jy
! Total flux subtracted in 200 components = -0.00221341 Jy
! Clean residual min=-0.003707 max=0.004617 Jy/beam
! Clean residual mean=0.000001 rms=0.000960 Jy/beam
! Combined flux in latest and established models = 0.459089 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 68 components and 0.459089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079932Jy  sigma=1.434649
! Fit after  self-cal, rms=0.079939Jy  sigma=1.434414
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079939Jy  sigma=1.434414
! Fit after  self-cal, rms=0.079309Jy  sigma=1.414708
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9185 mas, bmaj=2.175 mas, bpa=-2.55 degrees
! Estimated noise=0.307149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110948 Jy
! Component: 100  -  total flux cleaned = -0.00137297 Jy
! Component: 150  -  total flux cleaned = -0.00143621 Jy
! Component: 200  -  total flux cleaned = -0.00140809 Jy
! Total flux subtracted in 200 components = -0.00140809 Jy
! Clean residual min=-0.002819 max=0.003973 Jy/beam
! Clean residual mean=-0.000000 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.457681 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 80 components and 0.457681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079269Jy  sigma=1.414171
! Fit after  self-cal, rms=0.079276Jy  sigma=1.414111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00393388 Jy
! Component: 100  -  total flux cleaned = 0.00555034 Jy
! Component: 150  -  total flux cleaned = 0.00561528 Jy
! Component: 200  -  total flux cleaned = 0.00572423 Jy
! Total flux subtracted in 200 components = 0.00572423 Jy
! Clean residual min=-0.002420 max=0.002965 Jy/beam
! Clean residual mean=-0.000000 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.463405 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 101 components and 0.463405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079060Jy  sigma=1.409702
! Fit after  self-cal, rms=0.079046Jy  sigma=1.409418
! Inverting map 
! Added new window around map position (1.8, -11.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0026317 Jy
! Component: 100  -  total flux cleaned = 0.00424265 Jy
! Component: 150  -  total flux cleaned = 0.00512602 Jy
! Component: 200  -  total flux cleaned = 0.00570616 Jy
! Total flux subtracted in 200 components = 0.00570616 Jy
! Clean residual min=-0.002325 max=0.002175 Jy/beam
! Clean residual mean=0.000000 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.469112 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 125 components and 0.469111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078932Jy  sigma=1.407212
! Fit after  self-cal, rms=0.078929Jy  sigma=1.407157
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078929Jy  sigma=1.407157
! Fit after  self-cal, rms=0.078773Jy  sigma=1.406765
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9184 mas, bmaj=2.175 mas, bpa=-2.533 degrees
! Estimated noise=0.306402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206832 Jy
! Component: 100  -  total flux cleaned = 0.000579469 Jy
! Component: 150  -  total flux cleaned = 0.00079723 Jy
! Component: 200  -  total flux cleaned = 0.00102317 Jy
! Total flux subtracted in 200 components = 0.00102317 Jy
! Clean residual min=-0.002120 max=0.002071 Jy/beam
! Clean residual mean=-0.000000 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.470135 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 140 components and 0.470135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078735Jy  sigma=1.406090
! Fit after  self-cal, rms=0.078732Jy  sigma=1.406061
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.69851e-05 Jy
! Component: 100  -  total flux cleaned = 0.000215286 Jy
! Component: 150  -  total flux cleaned = 0.000264404 Jy
! Component: 200  -  total flux cleaned = 0.000239601 Jy
! Total flux subtracted in 200 components = 0.000239601 Jy
! Clean residual min=-0.002119 max=0.001987 Jy/beam
! Clean residual mean=-0.000000 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.470374 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 151 components and 0.470374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078714Jy  sigma=1.405756
! Fit after  self-cal, rms=0.078712Jy  sigma=1.405742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078712Jy  sigma=1.405742
! Fit after  self-cal, rms=0.078681Jy  sigma=1.405648
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.264 mas, bmaj=3.499 mas, bpa=6.856 degrees
! Estimated noise=0.384748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000417275 Jy
! Component: 100  -  total flux cleaned = -0.000316427 Jy
! Component: 150  -  total flux cleaned = -0.000225758 Jy
! Component: 200  -  total flux cleaned = -0.000122986 Jy
! Total flux subtracted in 200 components = -0.000122986 Jy
! Clean residual min=-0.001990 max=0.001890 Jy/beam
! Clean residual mean=-0.000000 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.470251 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 181 components and 0.470251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078666Jy  sigma=1.405608
! Fit after  self-cal, rms=0.078665Jy  sigma=1.405579
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.81356e-05 Jy
! Component: 100  -  total flux cleaned = 3.29858e-05 Jy
! Component: 150  -  total flux cleaned = 0.000129831 Jy
! Component: 200  -  total flux cleaned = 0.000199786 Jy
! Total flux subtracted in 200 components = 0.000199786 Jy
! Clean residual min=-0.002037 max=0.001845 Jy/beam
! Clean residual mean=-0.000000 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.470451 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 191 components and 0.470451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078662Jy  sigma=1.405618
! Fit after  self-cal, rms=0.078662Jy  sigma=1.405610
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9184 mas, bmaj=2.175 mas, bpa=-2.518 degrees
! Estimated noise=0.306106 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9184 x 2.175 at -2.518 degrees (North through East)
! Clean map  min=-0.0031049  max=0.41293 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6455 mas, bmaj=1.681 mas, bpa=-2.881 degrees
! Estimated noise=0.486623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.310625 Jy
! Component: 100  -  total flux cleaned = 0.38145 Jy
! Component: 150  -  total flux cleaned = 0.408961 Jy
! Component: 200  -  total flux cleaned = 0.423423 Jy
! Total flux subtracted in 200 components = 0.423423 Jy
! Clean residual min=-0.005286 max=0.006993 Jy/beam
! Clean residual mean=-0.000001 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.423423 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.423423 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9184 mas, bmaj=2.175 mas, bpa=-2.518 degrees
! Estimated noise=0.306106 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111517 Jy
! Component: 100  -  total flux cleaned = 0.0176494 Jy
! Component: 150  -  total flux cleaned = 0.0222521 Jy
! Component: 200  -  total flux cleaned = 0.0259308 Jy
! Total flux subtracted in 200 components = 0.0259308 Jy
! Clean residual min=-0.002660 max=0.002739 Jy/beam
! Clean residual mean=-0.000001 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.449354 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 52 components and 0.449354 Jy
! Inverting map 
! Added new window around map position (20.2, -22.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00319777 Jy
! Component: 100  -  total flux cleaned = 0.00585504 Jy
! Component: 150  -  total flux cleaned = 0.00811907 Jy
! Component: 200  -  total flux cleaned = 0.010076 Jy
! Total flux subtracted in 200 components = 0.010076 Jy
! Clean residual min=-0.002202 max=0.001844 Jy/beam
! Clean residual mean=-0.000000 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.45943 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 75 components and 0.45943 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.264 mas, bmaj=3.499 mas, bpa=6.856 degrees
! Estimated noise=0.384748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240101 Jy
! Component: 100  -  total flux cleaned = 0.00421559 Jy
! Component: 150  -  total flux cleaned = 0.00568587 Jy
! Component: 200  -  total flux cleaned = 0.00666199 Jy
! Total flux subtracted in 200 components = 0.00666199 Jy
! Clean residual min=-0.002195 max=0.001782 Jy/beam
! Clean residual mean=-0.000001 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.466092 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00070169 Jy
! Component: 100  -  total flux cleaned = 0.00123767 Jy
! Component: 150  -  total flux cleaned = 0.00174181 Jy
! Component: 200  -  total flux cleaned = 0.00218566 Jy
! Total flux subtracted in 200 components = 0.00218566 Jy
! Clean residual min=-0.002044 max=0.001752 Jy/beam
! Clean residual mean=-0.000000 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.468277 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 127 components and 0.468277 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9184 mas, bmaj=2.175 mas, bpa=-2.518 degrees
! Estimated noise=0.306106 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000290738 Jy
! Component: 100  -  total flux cleaned = 0.000418144 Jy
! Component: 150  -  total flux cleaned = 0.000498623 Jy
! Component: 200  -  total flux cleaned = 0.000611606 Jy
! Total flux subtracted in 200 components = 0.000611606 Jy
! Clean residual min=-0.001877 max=0.001701 Jy/beam
! Clean residual mean=-0.000000 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.468889 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 151 components and 0.468889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078675Jy  sigma=1.406305
! Fit after  self-cal, rms=0.078662Jy  sigma=1.406124
wmodel /J2226+0052_X_map.mod
! wmodel: Unable to open new model file: /J2226+0052_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2226+0052_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9184 x 2.175 at -2.518 degrees (North through East)
! Clean map  min=-0.0018014  max=0.41367 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2226+0052_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.413674 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000401617 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.291256 0.291256 0.582513 1.16503 2.33005 4.6601 9.3202 18.6404 37.2808 74.5616
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.413 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1030.02 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2226+0052_X_dfm.log closed on Thu May 19 23:40:48 2016