! Started logfile: /scr/pima/bg219i_uvs/J2219+2613_X_dfm.log on Thu May 19 23:40:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2219+2613_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2219+2613_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.879142 visibilities/baseline/integration-bin.
! Found source: J2219+2613
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 27060 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2219+2613_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011969Jy  sigma=23.993810
! Fit after  self-cal, rms=0.874422Jy  sigma=20.695181
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8429 mas, bmaj=1.399 mas, bpa=-4.416 degrees
! Estimated noise=0.440005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0902697 Jy
! Component: 100  -  total flux cleaned = 0.123042 Jy
! Total flux subtracted in 100 components = 0.123042 Jy
! Clean residual min=-0.005357 max=0.014914 Jy/beam
! Clean residual mean=0.000006 rms=0.001442 Jy/beam
! Combined flux in latest and established models = 0.123042 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.123042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071257Jy  sigma=1.604870
! Fit after  self-cal, rms=0.071085Jy  sigma=1.601341
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163346 Jy
! Component: 100  -  total flux cleaned = 0.0246756 Jy
! Total flux subtracted in 100 components = 0.0246756 Jy
! Clean residual min=-0.003976 max=0.007660 Jy/beam
! Clean residual mean=0.000005 rms=0.001013 Jy/beam
! Combined flux in latest and established models = 0.147718 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 0.147718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066242Jy  sigma=1.470049
! Fit after  self-cal, rms=0.066233Jy  sigma=1.469539
! Inverting map 
! Added new window around map position (0.2, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00695379 Jy
! Component: 100  -  total flux cleaned = 0.0107317 Jy
! Total flux subtracted in 100 components = 0.0107317 Jy
! Clean residual min=-0.003356 max=0.004130 Jy/beam
! Clean residual mean=0.000004 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.158449 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.158449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065343Jy  sigma=1.444225
! Fit after  self-cal, rms=0.065274Jy  sigma=1.442706
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.111 mas, bmaj=1.753 mas, bpa=-2.016 degrees
! Estimated noise=0.187451 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00471067 Jy
! Component: 100  -  total flux cleaned = 0.00699261 Jy
! Component: 150  -  total flux cleaned = 0.00793948 Jy
! Component: 200  -  total flux cleaned = 0.00815307 Jy
! Total flux subtracted in 200 components = 0.00815307 Jy
! Clean residual min=-0.002654 max=0.003935 Jy/beam
! Clean residual mean=0.000000 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.166602 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 35 components and 0.166602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065004Jy  sigma=1.433515
! Fit after  self-cal, rms=0.064990Jy  sigma=1.433119
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.111 x 1.753 at -2.016 degrees (North through East)
! Clean map  min=-0.0024899  max=0.12529 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.16     HN        0.99     KP        0.98     
!   LA        0.99     MK        1.01     NL        0.98     OV        0.97     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.15     HN        0.96     KP        0.97     
!   LA        0.98     MK        0.99     NL        0.97     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.16     HN        0.95     KP        1.00     
!   LA        0.96     MK        1.00     NL        0.99     OV        0.95     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.15     HN        0.97     KP        1.01     
!   LA        0.96     MK        1.00     NL        0.98     OV        0.95     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.14     HN        0.96     KP        1.01     
!   LA        0.96     MK        0.99     NL        0.98     OV        0.97     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.16     HN        0.99     KP        1.01     
!   LA        0.98     MK        1.00     NL        0.97     OV        0.96     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.13     HN        0.97     KP        0.98     
!   LA        0.97     MK        1.00     NL        0.98     OV        0.97     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.15     HN        0.99     KP        0.99     
!   LA        0.95     MK        1.02     NL        0.98     OV        0.94     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.13     HN        1.02     KP        1.00     
!   LA        0.96     MK        0.99     NL        0.97     OV        0.96     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        0.93     KP        0.97     
!   LA        0.95     MK        0.98     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.09     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.16     HN        0.98     KP        1.00     
!   LA        0.99     MK        0.98     NL        1.01     OV        0.94     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.17     HN        1.04     KP        1.00     
!   LA        0.96     MK        1.00     NL        0.99     OV        0.97     
!   PT        0.96     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.064990Jy  sigma=1.433119
! Fit after  self-cal, rms=0.066162Jy  sigma=1.416551
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.114 mas, bmaj=1.759 mas, bpa=-2.534 degrees
! Estimated noise=0.187361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234939 Jy
! Component: 100  -  total flux cleaned = 0.00016269 Jy
! Component: 150  -  total flux cleaned = 0.000120804 Jy
! Component: 200  -  total flux cleaned = 0.000103104 Jy
! Total flux subtracted in 200 components = 0.000103104 Jy
! Clean residual min=-0.002120 max=0.002268 Jy/beam
! Clean residual mean=0.000004 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.166705 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 43 components and 0.166705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066145Jy  sigma=1.416207
! Fit after  self-cal, rms=0.066207Jy  sigma=1.415981
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066207Jy  sigma=1.415981
! Fit after  self-cal, rms=0.066478Jy  sigma=1.405644
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.749 mas, bpa=-2.477 degrees
! Estimated noise=0.186608 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000752571 Jy
! Component: 100  -  total flux cleaned = 0.000858954 Jy
! Component: 150  -  total flux cleaned = 0.000886681 Jy
! Component: 200  -  total flux cleaned = 0.000886731 Jy
! Total flux subtracted in 200 components = 0.000886731 Jy
! Clean residual min=-0.001252 max=0.001365 Jy/beam
! Clean residual mean=-0.000001 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.167592 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 53 components and 0.167592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066467Jy  sigma=1.405311
! Fit after  self-cal, rms=0.066487Jy  sigma=1.405163
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -11.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125486 Jy
! Component: 100  -  total flux cleaned = 0.00191994 Jy
! Component: 150  -  total flux cleaned = 0.00237535 Jy
! Component: 200  -  total flux cleaned = 0.00266197 Jy
! Total flux subtracted in 200 components = 0.00266197 Jy
! Clean residual min=-0.001178 max=0.001204 Jy/beam
! Clean residual mean=-0.000001 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.170254 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 79 components and 0.170254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066463Jy  sigma=1.404481
! Fit after  self-cal, rms=0.066462Jy  sigma=1.404425
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066462Jy  sigma=1.404425
! Fit after  self-cal, rms=0.066495Jy  sigma=1.404536
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.749 mas, bpa=-2.402 degrees
! Estimated noise=0.186501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467308 Jy
! Component: 100  -  total flux cleaned = 0.000810189 Jy
! Component: 150  -  total flux cleaned = 0.000977733 Jy
! Component: 200  -  total flux cleaned = 0.00105811 Jy
! Total flux subtracted in 200 components = 0.00105811 Jy
! Clean residual min=-0.001165 max=0.001196 Jy/beam
! Clean residual mean=-0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.171312 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 89 components and 0.171312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066490Jy  sigma=1.404403
! Fit after  self-cal, rms=0.066490Jy  sigma=1.404393
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179751 Jy
! Component: 100  -  total flux cleaned = 0.00025422 Jy
! Component: 150  -  total flux cleaned = 0.000306495 Jy
! Component: 200  -  total flux cleaned = 0.00034765 Jy
! Total flux subtracted in 200 components = 0.00034765 Jy
! Clean residual min=-0.001162 max=0.001185 Jy/beam
! Clean residual mean=-0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.17166 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 92 components and 0.17166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066488Jy  sigma=1.404343
! Fit after  self-cal, rms=0.066487Jy  sigma=1.404337
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066487Jy  sigma=1.404337
! Fit after  self-cal, rms=0.066477Jy  sigma=1.404328
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=2.66 mas, bpa=-1.551 degrees
! Estimated noise=0.221881 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000499534 Jy
! Component: 100  -  total flux cleaned = 0.000691136 Jy
! Component: 150  -  total flux cleaned = 0.000839939 Jy
! Component: 200  -  total flux cleaned = 0.000942256 Jy
! Total flux subtracted in 200 components = 0.000942256 Jy
! Clean residual min=-0.001794 max=0.001422 Jy/beam
! Clean residual mean=-0.000002 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.172602 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 104 components and 0.172602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066476Jy  sigma=1.404325
! Fit after  self-cal, rms=0.066474Jy  sigma=1.404305
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137954 Jy
! Component: 100  -  total flux cleaned = 0.000255962 Jy
! Component: 150  -  total flux cleaned = 0.000338789 Jy
! Component: 200  -  total flux cleaned = 0.00036877 Jy
! Total flux subtracted in 200 components = 0.00036877 Jy
! Clean residual min=-0.001776 max=0.001425 Jy/beam
! Clean residual mean=-0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.172971 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 109 components and 0.172971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066475Jy  sigma=1.404322
! Fit after  self-cal, rms=0.066474Jy  sigma=1.404315
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.109 mas, bmaj=1.748 mas, bpa=-2.358 degrees
! Estimated noise=0.186445 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.109 x 1.748 at -2.358 degrees (North through East)
! Clean map  min=-0.0011327  max=0.12456 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8416 mas, bmaj=1.393 mas, bpa=-4.864 degrees
! Estimated noise=0.439037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0900531 Jy
! Component: 100  -  total flux cleaned = 0.123275 Jy
! Component: 150  -  total flux cleaned = 0.139738 Jy
! Component: 200  -  total flux cleaned = 0.14952 Jy
! Total flux subtracted in 200 components = 0.14952 Jy
! Clean residual min=-0.003402 max=0.005053 Jy/beam
! Clean residual mean=0.000002 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.14952 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.14952 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.109 mas, bmaj=1.748 mas, bpa=-2.358 degrees
! Estimated noise=0.186445 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00838186 Jy
! Component: 100  -  total flux cleaned = 0.0126963 Jy
! Component: 150  -  total flux cleaned = 0.0150615 Jy
! Component: 200  -  total flux cleaned = 0.0166375 Jy
! Total flux subtracted in 200 components = 0.0166375 Jy
! Clean residual min=-0.001316 max=0.001340 Jy/beam
! Clean residual mean=-0.000002 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.166158 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 36 components and 0.166158 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=2.66 mas, bpa=-1.551 degrees
! Estimated noise=0.221881 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167954 Jy
! Component: 100  -  total flux cleaned = 0.00288079 Jy
! Component: 150  -  total flux cleaned = 0.00378579 Jy
! Component: 200  -  total flux cleaned = 0.0044837 Jy
! Total flux subtracted in 200 components = 0.0044837 Jy
! Clean residual min=-0.001847 max=0.001425 Jy/beam
! Clean residual mean=-0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.170641 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000546069 Jy
! Component: 100  -  total flux cleaned = 0.00097666 Jy
! Component: 150  -  total flux cleaned = 0.00131741 Jy
! Component: 200  -  total flux cleaned = 0.00158888 Jy
! Total flux subtracted in 200 components = 0.00158888 Jy
! Clean residual min=-0.001798 max=0.001398 Jy/beam
! Clean residual mean=-0.000002 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.17223 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 78 components and 0.17223 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.109 mas, bmaj=1.748 mas, bpa=-2.358 degrees
! Estimated noise=0.186445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000372351 Jy
! Component: 100  -  total flux cleaned = 0.000428818 Jy
! Component: 150  -  total flux cleaned = 0.00046153 Jy
! Component: 200  -  total flux cleaned = 0.000505536 Jy
! Total flux subtracted in 200 components = 0.000505536 Jy
! Clean residual min=-0.001171 max=0.001194 Jy/beam
! Clean residual mean=-0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.172736 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 90 components and 0.172736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066483Jy  sigma=1.404505
! Fit after  self-cal, rms=0.066474Jy  sigma=1.404381
wmodel /J2219+2613_X_map.mod
! wmodel: Unable to open new model file: /J2219+2613_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2219+2613_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.109 x 1.748 at -2.358 degrees (North through East)
! Clean map  min=-0.0011008  max=0.12428 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2219+2613_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.124282 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000292904 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.707027 0.707027 1.41405 2.82811 5.65622 11.3124 22.6249 45.2498 90.4995
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.124 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  424.311 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2219+2613_X_dfm.log closed on Thu May 19 23:40:21 2016