! Started logfile: /scr/pima/bg219i_uvs/J2219+2120_X_dfm.log on Thu May 19 23:40:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2219+2120_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2219+2120_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.877061 visibilities/baseline/integration-bin.
! Found source: J2219+2120
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29364 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2219+2120_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010692Jy  sigma=23.658139
! Fit after  self-cal, rms=0.882034Jy  sigma=20.600489
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8423 mas, bmaj=1.398 mas, bpa=-3.972 degrees
! Estimated noise=0.40617 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0915077 Jy
! Component: 100  -  total flux cleaned = 0.111851 Jy
! Total flux subtracted in 100 components = 0.111851 Jy
! Clean residual min=-0.003520 max=0.007297 Jy/beam
! Clean residual mean=-0.000002 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.111851 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.111851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065881Jy  sigma=1.423308
! Fit after  self-cal, rms=0.065740Jy  sigma=1.420312
! Inverting map 
! Added new window around map position (0.4, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00835644 Jy
! Component: 100  -  total flux cleaned = 0.0133029 Jy
! Total flux subtracted in 100 components = 0.0133029 Jy
! Clean residual min=-0.002920 max=0.003037 Jy/beam
! Clean residual mean=-0.000001 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.125154 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.125154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064574Jy  sigma=1.389639
! Fit after  self-cal, rms=0.064544Jy  sigma=1.388721
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=1.693 mas, bpa=-5.84 degrees
! Estimated noise=0.193559 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0038909 Jy
! Component: 100  -  total flux cleaned = 0.00597994 Jy
! Component: 150  -  total flux cleaned = 0.0071993 Jy
! Component: 200  -  total flux cleaned = 0.00794318 Jy
! Total flux subtracted in 200 components = 0.00794318 Jy
! Clean residual min=-0.001522 max=0.001656 Jy/beam
! Clean residual mean=-0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.133097 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 35 components and 0.133097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064326Jy  sigma=1.382678
! Fit after  self-cal, rms=0.064326Jy  sigma=1.382519
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 1.693 at -5.84 degrees (North through East)
! Clean map  min=-0.0014354  max=0.11928 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.99     
!   LA        1.00     MK        1.06     NL        1.02     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.03     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.02     OV        0.96     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.02     OV        0.97     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        1.01     
!   LA        1.02     MK        1.02     NL        1.01     OV        0.95     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.97     KP        1.02     
!   LA        1.01     MK        1.00     NL        1.00     OV        0.95     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.98     KP        1.06     
!   LA        1.00     MK        1.03     NL        1.01     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.01     KP        1.04     
!   LA        0.97     MK        0.96     NL        1.00     OV        1.01     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        0.96     KP        1.01     
!   LA        0.99     MK        1.02     NL        0.99     OV        0.95     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.94     KP        0.98     
!   LA        0.99     MK        1.00     NL        1.02     OV        0.95     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.98     KP        1.00     
!   LA        0.95     MK        1.01     NL        1.02     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.98     KP        0.98     
!   LA        1.01     MK        1.01     NL        0.98     OV        0.97     
!   PT        0.98     SC        1.08     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.96     
!   PT        0.99     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.064326Jy  sigma=1.382519
! Fit after  self-cal, rms=0.064183Jy  sigma=1.379520
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.698 mas, bpa=-5.813 degrees
! Estimated noise=0.193118 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002322 Jy
! Component: 100  -  total flux cleaned = 0.000180807 Jy
! Component: 150  -  total flux cleaned = 0.000118027 Jy
! Component: 200  -  total flux cleaned = 5.65901e-05 Jy
! Total flux subtracted in 200 components = 5.65901e-05 Jy
! Clean residual min=-0.001217 max=0.001435 Jy/beam
! Clean residual mean=-0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.133153 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 43 components and 0.133153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064178Jy  sigma=1.379399
! Fit after  self-cal, rms=0.064195Jy  sigma=1.379336
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064195Jy  sigma=1.379336
! Fit after  self-cal, rms=0.064356Jy  sigma=1.376932
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.095 mas, bmaj=1.697 mas, bpa=-5.734 degrees
! Estimated noise=0.193134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.33594e-05 Jy
! Component: 100  -  total flux cleaned = 3.53378e-05 Jy
! Component: 150  -  total flux cleaned = 1.87285e-05 Jy
! Component: 200  -  total flux cleaned = -3.96863e-06 Jy
! Total flux subtracted in 200 components = -3.96863e-06 Jy
! Clean residual min=-0.001156 max=0.001181 Jy/beam
! Clean residual mean=-0.000001 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.133149 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.133149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064353Jy  sigma=1.376882
! Fit after  self-cal, rms=0.064363Jy  sigma=1.376845
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7.6, 40.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000761059 Jy
! Component: 100  -  total flux cleaned = 0.000580387 Jy
! Component: 150  -  total flux cleaned = 0.000526772 Jy
! Component: 200  -  total flux cleaned = 0.000491123 Jy
! Total flux subtracted in 200 components = 0.000491123 Jy
! Clean residual min=-0.001101 max=0.001146 Jy/beam
! Clean residual mean=-0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.133641 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 0.133641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064345Jy  sigma=1.376547
! Fit after  self-cal, rms=0.064343Jy  sigma=1.376513
! Inverting map 
! Added new window around map position (-35.2, 28).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000445419 Jy
! Component: 100  -  total flux cleaned = 0.000443885 Jy
! Component: 150  -  total flux cleaned = 0.000527616 Jy
! Component: 200  -  total flux cleaned = 0.000580446 Jy
! Total flux subtracted in 200 components = 0.000580446 Jy
! Clean residual min=-0.001065 max=0.001048 Jy/beam
! Clean residual mean=-0.000001 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.134221 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 85 components and 0.134221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064313Jy  sigma=1.376012
! Fit after  self-cal, rms=0.064311Jy  sigma=1.375968
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064311Jy  sigma=1.375968
! Fit after  self-cal, rms=0.064381Jy  sigma=1.375909
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.095 mas, bmaj=1.698 mas, bpa=-5.715 degrees
! Estimated noise=0.193332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000270222 Jy
! Component: 100  -  total flux cleaned = 0.000254456 Jy
! Component: 150  -  total flux cleaned = 0.000209655 Jy
! Component: 200  -  total flux cleaned = 0.000181838 Jy
! Total flux subtracted in 200 components = 0.000181838 Jy
! Clean residual min=-0.001049 max=0.001029 Jy/beam
! Clean residual mean=-0.000001 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.134403 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 90 components and 0.134403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064370Jy  sigma=1.375763
! Fit after  self-cal, rms=0.064370Jy  sigma=1.375751
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.24492e-05 Jy
! Component: 100  -  total flux cleaned = 3.30315e-05 Jy
! Component: 150  -  total flux cleaned = 4.42983e-05 Jy
! Component: 200  -  total flux cleaned = 5.51765e-05 Jy
! Total flux subtracted in 200 components = 5.51765e-05 Jy
! Clean residual min=-0.001064 max=0.001034 Jy/beam
! Clean residual mean=-0.000001 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.134458 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 94 components and 0.134458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064365Jy  sigma=1.375681
! Fit after  self-cal, rms=0.064365Jy  sigma=1.375679
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064365Jy  sigma=1.375679
! Fit after  self-cal, rms=0.064389Jy  sigma=1.375665
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.173 mas, bmaj=2.77 mas, bpa=-1.468 degrees
! Estimated noise=0.229908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115463 Jy
! Component: 100  -  total flux cleaned = -8.29634e-05 Jy
! Component: 150  -  total flux cleaned = -6.85033e-05 Jy
! Component: 200  -  total flux cleaned = -4.91849e-05 Jy
! Total flux subtracted in 200 components = -4.91849e-05 Jy
! Clean residual min=-0.001159 max=0.000985 Jy/beam
! Clean residual mean=-0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.134409 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 103 components and 0.134409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064388Jy  sigma=1.375635
! Fit after  self-cal, rms=0.064388Jy  sigma=1.375632
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.2e-06 Jy
! Component: 100  -  total flux cleaned = 1.57891e-05 Jy
! Component: 150  -  total flux cleaned = 1.58063e-05 Jy
! Component: 200  -  total flux cleaned = 2.10141e-05 Jy
! Total flux subtracted in 200 components = 2.10141e-05 Jy
! Clean residual min=-0.001146 max=0.000984 Jy/beam
! Clean residual mean=-0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.13443 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 105 components and 0.13443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064388Jy  sigma=1.375619
! Fit after  self-cal, rms=0.064388Jy  sigma=1.375620
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.095 mas, bmaj=1.699 mas, bpa=-5.699 degrees
! Estimated noise=0.193403 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.095 x 1.699 at -5.699 degrees (North through East)
! Clean map  min=-0.00095985  max=0.11898 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.844 mas, bmaj=1.4 mas, bpa=-3.832 degrees
! Estimated noise=0.407005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0916521 Jy
! Component: 100  -  total flux cleaned = 0.112211 Jy
! Component: 150  -  total flux cleaned = 0.120989 Jy
! Component: 200  -  total flux cleaned = 0.126124 Jy
! Total flux subtracted in 200 components = 0.126124 Jy
! Clean residual min=-0.002828 max=0.002618 Jy/beam
! Clean residual mean=-0.000001 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.126124 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.126124 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.095 mas, bmaj=1.699 mas, bpa=-5.699 degrees
! Estimated noise=0.193403 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00336737 Jy
! Component: 100  -  total flux cleaned = 0.00529444 Jy
! Component: 150  -  total flux cleaned = 0.0064558 Jy
! Component: 200  -  total flux cleaned = 0.00705414 Jy
! Total flux subtracted in 200 components = 0.00705414 Jy
! Clean residual min=-0.001212 max=0.001116 Jy/beam
! Clean residual mean=-0.000000 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.133178 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 34 components and 0.133178 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.173 mas, bmaj=2.77 mas, bpa=-1.468 degrees
! Estimated noise=0.229908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00080316 Jy
! Component: 100  -  total flux cleaned = 0.000975152 Jy
! Component: 150  -  total flux cleaned = 0.00103396 Jy
! Component: 200  -  total flux cleaned = 0.00106815 Jy
! Total flux subtracted in 200 components = 0.00106815 Jy
! Clean residual min=-0.001257 max=0.000982 Jy/beam
! Clean residual mean=-0.000000 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.134246 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.39268e-05 Jy
! Component: 100  -  total flux cleaned = 6.89827e-07 Jy
! Component: 150  -  total flux cleaned = 2.44811e-05 Jy
! Component: 200  -  total flux cleaned = 4.64019e-05 Jy
! Total flux subtracted in 200 components = 4.64019e-05 Jy
! Clean residual min=-0.001219 max=0.000973 Jy/beam
! Clean residual mean=-0.000001 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.134293 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 63 components and 0.134293 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.095 mas, bmaj=1.699 mas, bpa=-5.699 degrees
! Estimated noise=0.193403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197626 Jy
! Component: 100  -  total flux cleaned = 0.000223799 Jy
! Component: 150  -  total flux cleaned = 0.000185176 Jy
! Component: 200  -  total flux cleaned = 0.000116473 Jy
! Total flux subtracted in 200 components = 0.000116473 Jy
! Clean residual min=-0.001050 max=0.001037 Jy/beam
! Clean residual mean=-0.000001 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.134409 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.134409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064405Jy  sigma=1.375972
! Fit after  self-cal, rms=0.064402Jy  sigma=1.375922
wmodel /J2219+2120_X_map.mod
! wmodel: Unable to open new model file: /J2219+2120_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2219+2120_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.095 x 1.699 at -5.699 degrees (North through East)
! Clean map  min=-0.00093851  max=0.119 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2219+2120_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.119001 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000242945 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.612461 0.612461 1.22492 2.44984 4.89969 9.79937 19.5987 39.1975 78.395
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.119 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  489.827 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2219+2120_X_dfm.log closed on Thu May 19 23:40:12 2016