! Started logfile: /scr/pima/bg219i_uvs/J2214+0711_X_dfm.log on Thu May 19 23:40:00 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2214+0711_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2214+0711_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.914905 visibilities/baseline/integration-bin.
! Found source: J2214+0711
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20256 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2214+0711_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014466Jy  sigma=22.991536
! Fit after  self-cal, rms=0.825146Jy  sigma=18.565839
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6754 mas, bmaj=1.723 mas, bpa=-4.584 degrees
! Estimated noise=0.383897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.138156 Jy
! Component: 100  -  total flux cleaned = 0.168955 Jy
! Total flux subtracted in 100 components = 0.168955 Jy
! Clean residual min=-0.004056 max=0.010480 Jy/beam
! Clean residual mean=-0.000001 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.168955 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.168955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070386Jy  sigma=1.447785
! Fit after  self-cal, rms=0.070338Jy  sigma=1.447037
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104644 Jy
! Component: 100  -  total flux cleaned = 0.0149373 Jy
! Total flux subtracted in 100 components = 0.0149373 Jy
! Clean residual min=-0.003440 max=0.003839 Jy/beam
! Clean residual mean=-0.000000 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.183893 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.183893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069015Jy  sigma=1.405135
! Fit after  self-cal, rms=0.068980Jy  sigma=1.404363
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8471 mas, bmaj=1.965 mas, bpa=-3.736 degrees
! Estimated noise=0.228755 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.6, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407406 Jy
! Component: 100  -  total flux cleaned = 0.00667309 Jy
! Component: 150  -  total flux cleaned = 0.0085483 Jy
! Component: 200  -  total flux cleaned = 0.00959496 Jy
! Total flux subtracted in 200 components = 0.00959496 Jy
! Clean residual min=-0.002785 max=0.002863 Jy/beam
! Clean residual mean=-0.000002 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.193487 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 35 components and 0.193487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068706Jy  sigma=1.397090
! Fit after  self-cal, rms=0.068693Jy  sigma=1.396563
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8471 x 1.965 at -3.736 degrees (North through East)
! Clean map  min=-0.002318  max=0.17608 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        0.99     KP        0.96     
!   LA        1.00     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.02     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.96     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.00     NL        0.98     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.08     HN        0.99     KP        0.97     
!   LA        0.98     MK        1.01     NL        1.00     OV        0.98     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.00     KP        0.98     
!   LA        1.00     MK        0.99     NL        0.97     OV        1.00     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.99     KP        0.98     
!   LA        1.01     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.09     HN        0.95     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.10     HN        1.00     KP        0.97     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.96     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        0.98     KP        0.96     
!   LA        0.97     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        0.98     KP        0.99     
!   LA        0.96     MK        1.02     NL        1.02     OV        0.96     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        0.97     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.97     
!   PT        0.97     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.068693Jy  sigma=1.396563
! Fit after  self-cal, rms=0.068854Jy  sigma=1.389013
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8464 mas, bmaj=1.965 mas, bpa=-3.635 degrees
! Estimated noise=0.227675 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000842158 Jy
! Component: 100  -  total flux cleaned = -0.00119792 Jy
! Component: 150  -  total flux cleaned = -0.00127873 Jy
! Component: 200  -  total flux cleaned = -0.00130376 Jy
! Total flux subtracted in 200 components = -0.00130376 Jy
! Clean residual min=-0.002152 max=0.002501 Jy/beam
! Clean residual mean=-0.000002 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.192184 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.192184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068825Jy  sigma=1.388397
! Fit after  self-cal, rms=0.068845Jy  sigma=1.388295
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068845Jy  sigma=1.388295
! Fit after  self-cal, rms=0.069287Jy  sigma=1.382415
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8466 mas, bmaj=1.964 mas, bpa=-3.656 degrees
! Estimated noise=0.227703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000342536 Jy
! Component: 100  -  total flux cleaned = -0.000457331 Jy
! Component: 150  -  total flux cleaned = -0.000549435 Jy
! Component: 200  -  total flux cleaned = -0.000598146 Jy
! Total flux subtracted in 200 components = -0.000598146 Jy
! Clean residual min=-0.001955 max=0.002531 Jy/beam
! Clean residual mean=-0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.191586 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 0.191586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069274Jy  sigma=1.382026
! Fit after  self-cal, rms=0.069283Jy  sigma=1.381943
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222362 Jy
! Component: 100  -  total flux cleaned = 0.00349071 Jy
! Component: 150  -  total flux cleaned = 0.00435173 Jy
! Component: 200  -  total flux cleaned = 0.00486956 Jy
! Total flux subtracted in 200 components = 0.00486956 Jy
! Clean residual min=-0.001763 max=0.001675 Jy/beam
! Clean residual mean=-0.000000 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.196455 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 89 components and 0.196455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069203Jy  sigma=1.379862
! Fit after  self-cal, rms=0.069197Jy  sigma=1.379765
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069197Jy  sigma=1.379765
! Fit after  self-cal, rms=0.069217Jy  sigma=1.379657
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8463 mas, bmaj=1.964 mas, bpa=-3.649 degrees
! Estimated noise=0.227489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000380715 Jy
! Component: 100  -  total flux cleaned = 0.000622014 Jy
! Component: 150  -  total flux cleaned = 0.000811175 Jy
! Component: 200  -  total flux cleaned = 0.00100069 Jy
! Total flux subtracted in 200 components = 0.00100069 Jy
! Clean residual min=-0.001634 max=0.001612 Jy/beam
! Clean residual mean=-0.000000 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.197456 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 100 components and 0.197456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069199Jy  sigma=1.379221
! Fit after  self-cal, rms=0.069200Jy  sigma=1.379201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (37.8, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131752 Jy
! Component: 100  -  total flux cleaned = 0.00135387 Jy
! Component: 150  -  total flux cleaned = 0.00144288 Jy
! Component: 200  -  total flux cleaned = 0.00152499 Jy
! Total flux subtracted in 200 components = 0.00152499 Jy
! Clean residual min=-0.001481 max=0.001337 Jy/beam
! Clean residual mean=-0.000000 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.198981 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 122 components and 0.198981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069167Jy  sigma=1.378388
! Fit after  self-cal, rms=0.069164Jy  sigma=1.378356
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069164Jy  sigma=1.378356
! Fit after  self-cal, rms=0.069154Jy  sigma=1.378293
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.093 mas, bmaj=3.067 mas, bpa=4.269 degrees
! Estimated noise=0.294158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000939663 Jy
! Component: 100  -  total flux cleaned = 0.00113152 Jy
! Component: 150  -  total flux cleaned = 0.00122424 Jy
! Component: 200  -  total flux cleaned = 0.00130421 Jy
! Total flux subtracted in 200 components = 0.00130421 Jy
! Clean residual min=-0.001772 max=0.001613 Jy/beam
! Clean residual mean=0.000000 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.200285 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 142 components and 0.200285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069152Jy  sigma=1.378158
! Fit after  self-cal, rms=0.069150Jy  sigma=1.378111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.65125e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122267 Jy
! Component: 150  -  total flux cleaned = 0.000169659 Jy
! Component: 200  -  total flux cleaned = 0.000240362 Jy
! Total flux subtracted in 200 components = 0.000240362 Jy
! Clean residual min=-0.001693 max=0.001565 Jy/beam
! Clean residual mean=0.000000 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.200525 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 154 components and 0.200525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069149Jy  sigma=1.378092
! Fit after  self-cal, rms=0.069147Jy  sigma=1.378064
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8464 mas, bmaj=1.964 mas, bpa=-3.621 degrees
! Estimated noise=0.227277 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8464 x 1.964 at -3.621 degrees (North through East)
! Clean map  min=-0.0012575  max=0.17556 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6742 mas, bmaj=1.721 mas, bpa=-4.535 degrees
! Estimated noise=0.381574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137227 Jy
! Component: 100  -  total flux cleaned = 0.168421 Jy
! Component: 150  -  total flux cleaned = 0.179159 Jy
! Component: 200  -  total flux cleaned = 0.183654 Jy
! Total flux subtracted in 200 components = 0.183654 Jy
! Clean residual min=-0.002323 max=0.002576 Jy/beam
! Clean residual mean=-0.000000 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.183654 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.183654 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8464 mas, bmaj=1.964 mas, bpa=-3.621 degrees
! Estimated noise=0.227277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311589 Jy
! Component: 100  -  total flux cleaned = 0.00537594 Jy
! Component: 150  -  total flux cleaned = 0.00720489 Jy
! Component: 200  -  total flux cleaned = 0.00874541 Jy
! Total flux subtracted in 200 components = 0.00874541 Jy
! Clean residual min=-0.001845 max=0.001636 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.1924 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 43 components and 0.1924 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.093 mas, bmaj=3.067 mas, bpa=4.269 degrees
! Estimated noise=0.294158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214427 Jy
! Component: 100  -  total flux cleaned = 0.00364593 Jy
! Component: 150  -  total flux cleaned = 0.00461315 Jy
! Component: 200  -  total flux cleaned = 0.0053694 Jy
! Total flux subtracted in 200 components = 0.0053694 Jy
! Clean residual min=-0.002036 max=0.001572 Jy/beam
! Clean residual mean=-0.000000 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.197769 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000483177 Jy
! Component: 100  -  total flux cleaned = 0.000790563 Jy
! Component: 150  -  total flux cleaned = 0.00104225 Jy
! Component: 200  -  total flux cleaned = 0.00129614 Jy
! Total flux subtracted in 200 components = 0.00129614 Jy
! Clean residual min=-0.001870 max=0.001527 Jy/beam
! Clean residual mean=-0.000000 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.199065 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 96 components and 0.199065 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8464 mas, bmaj=1.964 mas, bpa=-3.621 degrees
! Estimated noise=0.227277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000506679 Jy
! Component: 100  -  total flux cleaned = 0.000536893 Jy
! Component: 150  -  total flux cleaned = 0.000536181 Jy
! Component: 200  -  total flux cleaned = 0.000589394 Jy
! Total flux subtracted in 200 components = 0.000589394 Jy
! Clean residual min=-0.001463 max=0.001332 Jy/beam
! Clean residual mean=-0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.199655 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 111 components and 0.199655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069179Jy  sigma=1.378763
! Fit after  self-cal, rms=0.069170Jy  sigma=1.378631
wmodel /J2214+0711_X_map.mod
! wmodel: Unable to open new model file: /J2214+0711_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2214+0711_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8464 x 1.964 at -3.621 degrees (North through East)
! Clean map  min=-0.0012958  max=0.17539 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2214+0711_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.175394 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000318876 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.545415 0.545415 1.09083 2.18166 4.36332 8.72664 17.4533 34.9065 69.8131
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.175 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  550.04 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2214+0711_X_dfm.log closed on Thu May 19 23:40:03 2016