! Started logfile: /scr/pima/bg219i_uvs/J2214+0711_S_uvs.log on Wed Apr 6 23:17:42 2016 obs /scr/pima/bg219i_uvs/J2214+0711_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J2214+0711_S_uva.fits ! AN table 1: 41 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2214+0711 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7380 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J2214+0711_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.020132Jy sigma=23.298047 ! Fit after self-cal, rms=0.831364Jy sigma=19.013372 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.764 mas, bpa=-7.045 degrees ! Estimated noise=0.45585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131043 Jy ! Component: 100 - total flux cleaned = 0.160098 Jy ! Total flux subtracted in 100 components = 0.160098 Jy ! Clean residual min=-0.004819 max=0.009502 Jy/beam ! Clean residual mean=-0.000018 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.160098 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.160098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064729Jy sigma=1.394791 ! Fit after self-cal, rms=0.064724Jy sigma=1.394697 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0095456 Jy ! Component: 100 - total flux cleaned = 0.01493 Jy ! Total flux subtracted in 100 components = 0.01493 Jy ! Clean residual min=-0.003981 max=0.005047 Jy/beam ! Clean residual mean=-0.000012 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.175028 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 36 components and 0.175028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062960Jy sigma=1.353409 ! Fit after self-cal, rms=0.062946Jy sigma=1.353139 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.519 mas, bpa=-6.507 degrees ! Estimated noise=0.371642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667782 Jy ! Component: 100 - total flux cleaned = 0.011111 Jy ! Component: 150 - total flux cleaned = 0.0143539 Jy ! Component: 200 - total flux cleaned = 0.0168591 Jy ! Total flux subtracted in 200 components = 0.0168591 Jy ! Clean residual min=-0.002980 max=0.003026 Jy/beam ! Clean residual mean=-0.000003 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.191887 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 82 components and 0.191887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062055Jy sigma=1.332688 ! Fit after self-cal, rms=0.061999Jy sigma=1.331384 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.519 at -6.507 degrees (North through East) ! Clean map min=-0.0027132 max=0.16846 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.00 KP 1.00 ! LA 0.98 MK 1.00 NL 1.02 OV 1.00 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.02 KP 1.00 ! LA 1.01 MK 1.00 NL 1.01 OV 0.99 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 0.99 ! LA 0.98 MK 1.04 NL 0.99 OV 0.99 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.02 KP 0.98 ! LA 0.98 MK 1.03 NL 0.96 OV 0.98 ! PT 0.97 SC 1.00 ! ! ! Fit before self-cal, rms=0.061999Jy sigma=1.331384 ! Fit after self-cal, rms=0.061468Jy sigma=1.326157 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=7.569 mas, bpa=-6.467 degrees ! Estimated noise=0.369739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205499 Jy ! Component: 100 - total flux cleaned = 0.00305375 Jy ! Component: 150 - total flux cleaned = 0.00338572 Jy ! Component: 200 - total flux cleaned = 0.00343927 Jy ! Total flux subtracted in 200 components = 0.00343927 Jy ! Clean residual min=-0.002721 max=0.003169 Jy/beam ! Clean residual mean=0.000003 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.195326 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.195326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061386Jy sigma=1.324528 ! Fit after self-cal, rms=0.061378Jy sigma=1.324347 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061378Jy sigma=1.324347 ! Fit after self-cal, rms=0.060854Jy sigma=1.310117 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=7.56 mas, bpa=-6.412 degrees ! Estimated noise=0.369895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417108 Jy ! Component: 100 - total flux cleaned = 0.000272239 Jy ! Component: 150 - total flux cleaned = 0.000186359 Jy ! Component: 200 - total flux cleaned = 8.08865e-05 Jy ! Total flux subtracted in 200 components = 8.08865e-05 Jy ! Clean residual min=-0.001956 max=0.002739 Jy/beam ! Clean residual mean=-0.000000 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.195407 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 130 components and 0.195407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060833Jy sigma=1.309512 ! Fit after self-cal, rms=0.060837Jy sigma=1.309370 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, -28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237391 Jy ! Component: 100 - total flux cleaned = 0.0036026 Jy ! Component: 150 - total flux cleaned = 0.00417118 Jy ! Component: 200 - total flux cleaned = 0.0046335 Jy ! Total flux subtracted in 200 components = 0.0046335 Jy ! Clean residual min=-0.001774 max=0.001670 Jy/beam ! Clean residual mean=0.000000 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.200041 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 162 components and 0.200041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060740Jy sigma=1.306944 ! Fit after self-cal, rms=0.060732Jy sigma=1.306842 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060732Jy sigma=1.306842 ! Fit after self-cal, rms=0.060662Jy sigma=1.306765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.56 mas, bpa=-6.401 degrees ! Estimated noise=0.369582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676242 Jy ! Component: 100 - total flux cleaned = 0.000798187 Jy ! Component: 150 - total flux cleaned = 0.000861362 Jy ! Component: 200 - total flux cleaned = 0.000937208 Jy ! Total flux subtracted in 200 components = 0.000937208 Jy ! Clean residual min=-0.001735 max=0.001715 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.200978 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 183 components and 0.200978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060647Jy sigma=1.306377 ! Fit after self-cal, rms=0.060646Jy sigma=1.306365 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115832 Jy ! Component: 100 - total flux cleaned = 0.000149794 Jy ! Component: 150 - total flux cleaned = 0.000181169 Jy ! Component: 200 - total flux cleaned = 0.00021024 Jy ! Total flux subtracted in 200 components = 0.00021024 Jy ! Clean residual min=-0.001720 max=0.001711 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.201188 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 204 components and 0.201188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060639Jy sigma=1.306178 ! Fit after self-cal, rms=0.060639Jy sigma=1.306169 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060639Jy sigma=1.306169 ! Fit after self-cal, rms=0.060643Jy sigma=1.306149 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.42 mas, bmaj=11.22 mas, bpa=0.7349 degrees ! Estimated noise=0.479446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137128 Jy ! Component: 100 - total flux cleaned = 0.000188226 Jy ! Component: 150 - total flux cleaned = 0.000186985 Jy ! Component: 200 - total flux cleaned = 0.000222205 Jy ! Total flux subtracted in 200 components = 0.000222205 Jy ! Clean residual min=-0.001577 max=0.001947 Jy/beam ! Clean residual mean=0.000003 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.20141 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 216 components and 0.20141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060639Jy sigma=1.306042 ! Fit after self-cal, rms=0.060638Jy sigma=1.306032 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.4654e-05 Jy ! Component: 100 - total flux cleaned = 4.45416e-05 Jy ! Component: 150 - total flux cleaned = 4.46429e-05 Jy ! Component: 200 - total flux cleaned = 3.60805e-05 Jy ! Total flux subtracted in 200 components = 3.60805e-05 Jy ! Clean residual min=-0.001553 max=0.001947 Jy/beam ! Clean residual mean=0.000003 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.201446 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 230 components and 0.201446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060637Jy sigma=1.305999 ! Fit after self-cal, rms=0.060637Jy sigma=1.305996 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.561 mas, bpa=-6.383 degrees ! Estimated noise=0.369704 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 7.561 at -6.383 degrees (North through East) ! Clean map min=-0.0016117 max=0.16731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=6.794 mas, bpa=-6.98 degrees ! Estimated noise=0.456265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1311 Jy ! Component: 100 - total flux cleaned = 0.16012 Jy ! Component: 150 - total flux cleaned = 0.169746 Jy ! Component: 200 - total flux cleaned = 0.175419 Jy ! Total flux subtracted in 200 components = 0.175419 Jy ! Clean residual min=-0.003108 max=0.003123 Jy/beam ! Clean residual mean=-0.000009 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.175419 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.175419 Jy ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.561 mas, bpa=-6.383 degrees ! Estimated noise=0.369704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534395 Jy ! Component: 100 - total flux cleaned = 0.00925644 Jy ! Component: 150 - total flux cleaned = 0.0123088 Jy ! Component: 200 - total flux cleaned = 0.0147365 Jy ! Total flux subtracted in 200 components = 0.0147365 Jy ! Clean residual min=-0.002179 max=0.001863 Jy/beam ! Clean residual mean=-0.000003 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.190155 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 84 components and 0.190155 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.42 mas, bmaj=11.22 mas, bpa=0.7349 degrees ! Estimated noise=0.479446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327149 Jy ! Component: 100 - total flux cleaned = 0.00546148 Jy ! Component: 150 - total flux cleaned = 0.00701439 Jy ! Component: 200 - total flux cleaned = 0.00816991 Jy ! Total flux subtracted in 200 components = 0.00816991 Jy ! Clean residual min=-0.001806 max=0.001700 Jy/beam ! Clean residual mean=0.000001 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.198325 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648921 Jy ! Component: 100 - total flux cleaned = 0.00108766 Jy ! Component: 150 - total flux cleaned = 0.00147474 Jy ! Component: 200 - total flux cleaned = 0.00177716 Jy ! Total flux subtracted in 200 components = 0.00177716 Jy ! Clean residual min=-0.001680 max=0.001837 Jy/beam ! Clean residual mean=0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.200102 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 177 components and 0.200102 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.561 mas, bpa=-6.383 degrees ! Estimated noise=0.369704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572637 Jy ! Component: 100 - total flux cleaned = 0.00069751 Jy ! Component: 150 - total flux cleaned = 0.000775692 Jy ! Component: 200 - total flux cleaned = 0.00084515 Jy ! Total flux subtracted in 200 components = 0.00084515 Jy ! Clean residual min=-0.001745 max=0.001736 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.200948 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 198 components and 0.200948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060654Jy sigma=1.306543 ! Fit after self-cal, rms=0.060656Jy sigma=1.306448 wmodel /scr/pima/bg219i_uvs/J2214+0711_S_map.mod ! Writing 198 model components to file: /scr/pima/bg219i_uvs/J2214+0711_S_map.mod wobs /scr/pima/bg219i_uvs/J2214+0711_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219i_uvs/J2214+0711_S_uvs.fits wwins /scr/pima/bg219i_uvs/J2214+0711_S_map.win ! wwins: Wrote 3 windows to /scr/pima/bg219i_uvs/J2214+0711_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.91528e-05 Jy ! Component: 100 - total flux cleaned = -0.00021696 Jy ! Component: 150 - total flux cleaned = -0.000301354 Jy ! Component: 200 - total flux cleaned = -0.000301021 Jy ! Component: 250 - total flux cleaned = -0.000274717 Jy ! Component: 300 - total flux cleaned = -0.000275197 Jy ! Component: 350 - total flux cleaned = -0.000351102 Jy ! Component: 400 - total flux cleaned = -0.00037605 Jy ! Component: 450 - total flux cleaned = -0.000424246 Jy ! Component: 500 - total flux cleaned = -0.000400341 Jy ! Component: 550 - total flux cleaned = -0.000354115 Jy ! Component: 600 - total flux cleaned = -0.000400493 Jy ! Component: 650 - total flux cleaned = -0.000355862 Jy ! Component: 700 - total flux cleaned = -0.000356109 Jy ! Component: 750 - total flux cleaned = -0.000291295 Jy ! Component: 800 - total flux cleaned = -0.000227512 Jy ! Component: 850 - total flux cleaned = -0.000248723 Jy ! Component: 900 - total flux cleaned = -0.000207444 Jy ! Component: 950 - total flux cleaned = -0.000187686 Jy ! Component: 1000 - total flux cleaned = -0.000167968 Jy ! Component: 1050 - total flux cleaned = -0.000128519 Jy ! Component: 1100 - total flux cleaned = -1.19592e-05 Jy ! Component: 1150 - total flux cleaned = -1.22591e-05 Jy ! Component: 1200 - total flux cleaned = -3.1014e-05 Jy ! Component: 1250 - total flux cleaned = 6.92754e-06 Jy ! Component: 1300 - total flux cleaned = 6.27533e-05 Jy ! Component: 1350 - total flux cleaned = 0.000117848 Jy ! Component: 1400 - total flux cleaned = 0.000154121 Jy ! Component: 1450 - total flux cleaned = 0.000243218 Jy ! Component: 1500 - total flux cleaned = 0.000313804 Jy ! Component: 1550 - total flux cleaned = 0.000366049 Jy ! Component: 1600 - total flux cleaned = 0.00043502 Jy ! Component: 1650 - total flux cleaned = 0.000451957 Jy ! Component: 1700 - total flux cleaned = 0.000469151 Jy ! Component: 1750 - total flux cleaned = 0.000536298 Jy ! Component: 1800 - total flux cleaned = 0.000553027 Jy ! Component: 1850 - total flux cleaned = 0.000635416 Jy ! Component: 1900 - total flux cleaned = 0.000700541 Jy ! Component: 1950 - total flux cleaned = 0.000765105 Jy ! Component: 2000 - total flux cleaned = 0.000765078 Jy ! Component: 2050 - total flux cleaned = 0.000844352 Jy ! Component: 2100 - total flux cleaned = 0.000813081 Jy ! Component: 2150 - total flux cleaned = 0.000875491 Jy ! Component: 2200 - total flux cleaned = 0.00090641 Jy ! Component: 2250 - total flux cleaned = 0.00101305 Jy ! Component: 2300 - total flux cleaned = 0.000952599 Jy ! Component: 2350 - total flux cleaned = 0.00102737 Jy ! Component: 2400 - total flux cleaned = 0.00101281 Jy ! Component: 2450 - total flux cleaned = 0.00104226 Jy ! Component: 2500 - total flux cleaned = 0.00104245 Jy ! Component: 2550 - total flux cleaned = 0.00111474 Jy ! Component: 2600 - total flux cleaned = 0.00115762 Jy ! Component: 2650 - total flux cleaned = 0.00118607 Jy ! Component: 2700 - total flux cleaned = 0.00118602 Jy ! Component: 2750 - total flux cleaned = 0.00115819 Jy ! Component: 2800 - total flux cleaned = 0.00122757 Jy ! Component: 2850 - total flux cleaned = 0.00125511 Jy ! Component: 2900 - total flux cleaned = 0.00132345 Jy ! Component: 2950 - total flux cleaned = 0.00135073 Jy ! Component: 3000 - total flux cleaned = 0.0014046 Jy ! Component: 3050 - total flux cleaned = 0.00139117 Jy ! Component: 3100 - total flux cleaned = 0.00140416 Jy ! Component: 3150 - total flux cleaned = 0.00144378 Jy ! Component: 3200 - total flux cleaned = 0.00145678 Jy ! Component: 3250 - total flux cleaned = 0.00150872 Jy ! Component: 3300 - total flux cleaned = 0.00153434 Jy ! Component: 3350 - total flux cleaned = 0.00161081 Jy ! Component: 3400 - total flux cleaned = 0.00156026 Jy ! Component: 3450 - total flux cleaned = 0.00154771 Jy ! Component: 3500 - total flux cleaned = 0.00161026 Jy ! Component: 3550 - total flux cleaned = 0.00167235 Jy ! Component: 3600 - total flux cleaned = 0.00167234 Jy ! Component: 3650 - total flux cleaned = 0.00168452 Jy ! Component: 3700 - total flux cleaned = 0.00170893 Jy ! Component: 3750 - total flux cleaned = 0.00174509 Jy ! Component: 3800 - total flux cleaned = 0.001769 Jy ! Component: 3850 - total flux cleaned = 0.00179276 Jy ! Component: 3900 - total flux cleaned = 0.00175721 Jy ! Component: 3950 - total flux cleaned = 0.00181611 Jy ! Component: 4000 - total flux cleaned = 0.00179273 Jy ! Component: 4050 - total flux cleaned = 0.00185083 Jy ! Total flux subtracted in 4096 components = 0.00189702 Jy ! Clean residual min=-0.000578 max=0.000801 Jy/beam ! Clean residual mean=-0.000000 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.202845 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 504 components and 0.202845 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219i_uvs/J2214+0711_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 7.561 at -6.383 degrees (North through East) ! Clean map min=-0.0013427 max=0.16811 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2214+0711_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.168108 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000211356 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.377178 0.377178 0.754356 1.50871 3.01743 6.03485 12.0697 24.1394 48.2788 96.5576 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.168 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 795.379 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J2214+0711_S_uvs.log closed on Wed Apr 6 23:17:48 2016