! Started logfile: /scr/pima/bg219i_uvs/J2214+0711_S_dfm.log on Thu May 19 23:39:56 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219i_uvs/J2214+0711_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J2214+0711_S_uva.fits ! AN table 1: 41 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2214+0711 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7380 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2214+0711_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.020132Jy sigma=23.298047 ! Fit after self-cal, rms=0.831364Jy sigma=19.013372 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.764 mas, bpa=-7.045 degrees ! Estimated noise=0.45585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131043 Jy ! Component: 100 - total flux cleaned = 0.160098 Jy ! Total flux subtracted in 100 components = 0.160098 Jy ! Clean residual min=-0.004819 max=0.009502 Jy/beam ! Clean residual mean=-0.000018 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.160098 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.160098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064729Jy sigma=1.394791 ! Fit after self-cal, rms=0.064724Jy sigma=1.394697 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0095456 Jy ! Component: 100 - total flux cleaned = 0.01493 Jy ! Total flux subtracted in 100 components = 0.01493 Jy ! Clean residual min=-0.003981 max=0.005047 Jy/beam ! Clean residual mean=-0.000012 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.175028 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 36 components and 0.175028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062960Jy sigma=1.353409 ! Fit after self-cal, rms=0.062946Jy sigma=1.353139 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.519 mas, bpa=-6.507 degrees ! Estimated noise=0.371642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667782 Jy ! Component: 100 - total flux cleaned = 0.011111 Jy ! Component: 150 - total flux cleaned = 0.0143539 Jy ! Component: 200 - total flux cleaned = 0.0168591 Jy ! Total flux subtracted in 200 components = 0.0168591 Jy ! Clean residual min=-0.002980 max=0.003026 Jy/beam ! Clean residual mean=-0.000003 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.191887 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 82 components and 0.191887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062055Jy sigma=1.332688 ! Fit after self-cal, rms=0.061999Jy sigma=1.331384 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.519 at -6.507 degrees (North through East) ! Clean map min=-0.0027132 max=0.16846 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.00 KP 1.00 ! LA 0.98 MK 1.00 NL 1.02 OV 1.00 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.02 KP 1.00 ! LA 1.01 MK 1.00 NL 1.01 OV 0.99 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 0.99 ! LA 0.98 MK 1.04 NL 0.99 OV 0.99 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.02 KP 0.98 ! LA 0.98 MK 1.03 NL 0.96 OV 0.98 ! PT 0.97 SC 1.00 ! ! ! Fit before self-cal, rms=0.061999Jy sigma=1.331384 ! Fit after self-cal, rms=0.061468Jy sigma=1.326157 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=7.569 mas, bpa=-6.467 degrees ! Estimated noise=0.369739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205499 Jy ! Component: 100 - total flux cleaned = 0.00305375 Jy ! Component: 150 - total flux cleaned = 0.00338572 Jy ! Component: 200 - total flux cleaned = 0.00343927 Jy ! Total flux subtracted in 200 components = 0.00343927 Jy ! Clean residual min=-0.002721 max=0.003169 Jy/beam ! Clean residual mean=0.000003 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.195326 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.195326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061386Jy sigma=1.324528 ! Fit after self-cal, rms=0.061378Jy sigma=1.324347 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061378Jy sigma=1.324347 ! Fit after self-cal, rms=0.060854Jy sigma=1.310117 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=7.56 mas, bpa=-6.412 degrees ! Estimated noise=0.369895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417108 Jy ! Component: 100 - total flux cleaned = 0.000272239 Jy ! Component: 150 - total flux cleaned = 0.000186359 Jy ! Component: 200 - total flux cleaned = 8.08865e-05 Jy ! Total flux subtracted in 200 components = 8.08865e-05 Jy ! Clean residual min=-0.001956 max=0.002739 Jy/beam ! Clean residual mean=-0.000000 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.195407 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 130 components and 0.195407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060833Jy sigma=1.309512 ! Fit after self-cal, rms=0.060837Jy sigma=1.309370 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, -28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237391 Jy ! Component: 100 - total flux cleaned = 0.0036026 Jy ! Component: 150 - total flux cleaned = 0.00417118 Jy ! Component: 200 - total flux cleaned = 0.0046335 Jy ! Total flux subtracted in 200 components = 0.0046335 Jy ! Clean residual min=-0.001774 max=0.001670 Jy/beam ! Clean residual mean=0.000000 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.200041 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 162 components and 0.200041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060740Jy sigma=1.306944 ! Fit after self-cal, rms=0.060732Jy sigma=1.306842 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060732Jy sigma=1.306842 ! Fit after self-cal, rms=0.060662Jy sigma=1.306765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.56 mas, bpa=-6.401 degrees ! Estimated noise=0.369582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676242 Jy ! Component: 100 - total flux cleaned = 0.000798187 Jy ! Component: 150 - total flux cleaned = 0.000861362 Jy ! Component: 200 - total flux cleaned = 0.000937208 Jy ! Total flux subtracted in 200 components = 0.000937208 Jy ! Clean residual min=-0.001735 max=0.001715 Jy/beam ! Clean residual mean=0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.200978 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 183 components and 0.200978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060647Jy sigma=1.306377 ! Fit after self-cal, rms=0.060646Jy sigma=1.306365 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115832 Jy ! Component: 100 - total flux cleaned = 0.000149794 Jy ! Component: 150 - total flux cleaned = 0.000181169 Jy ! Component: 200 - total flux cleaned = 0.00021024 Jy ! Total flux subtracted in 200 components = 0.00021024 Jy ! Clean residual min=-0.001720 max=0.001711 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.201188 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 204 components and 0.201188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060639Jy sigma=1.306178 ! Fit after self-cal, rms=0.060639Jy sigma=1.306169 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060639Jy sigma=1.306169 ! Fit after self-cal, rms=0.060643Jy sigma=1.306149 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.42 mas, bmaj=11.22 mas, bpa=0.7349 degrees ! Estimated noise=0.479446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137128 Jy ! Component: 100 - total flux cleaned = 0.000188226 Jy ! Component: 150 - total flux cleaned = 0.000186985 Jy ! Component: 200 - total flux cleaned = 0.000222205 Jy ! Total flux subtracted in 200 components = 0.000222205 Jy ! Clean residual min=-0.001577 max=0.001947 Jy/beam ! Clean residual mean=0.000003 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.20141 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 216 components and 0.20141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060639Jy sigma=1.306042 ! Fit after self-cal, rms=0.060638Jy sigma=1.306032 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.4654e-05 Jy ! Component: 100 - total flux cleaned = 4.45416e-05 Jy ! Component: 150 - total flux cleaned = 4.46429e-05 Jy ! Component: 200 - total flux cleaned = 3.60805e-05 Jy ! Total flux subtracted in 200 components = 3.60805e-05 Jy ! Clean residual min=-0.001553 max=0.001947 Jy/beam ! Clean residual mean=0.000003 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.201446 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 230 components and 0.201446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060637Jy sigma=1.305999 ! Fit after self-cal, rms=0.060637Jy sigma=1.305996 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.561 mas, bpa=-6.383 degrees ! Estimated noise=0.369704 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 7.561 at -6.383 degrees (North through East) ! Clean map min=-0.0016117 max=0.16731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=6.794 mas, bpa=-6.98 degrees ! Estimated noise=0.456265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1311 Jy ! Component: 100 - total flux cleaned = 0.16012 Jy ! Component: 150 - total flux cleaned = 0.169746 Jy ! Component: 200 - total flux cleaned = 0.175419 Jy ! Total flux subtracted in 200 components = 0.175419 Jy ! Clean residual min=-0.003108 max=0.003123 Jy/beam ! Clean residual mean=-0.000009 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.175419 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.175419 Jy ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.561 mas, bpa=-6.383 degrees ! Estimated noise=0.369704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00534395 Jy ! Component: 100 - total flux cleaned = 0.00925644 Jy ! Component: 150 - total flux cleaned = 0.0123088 Jy ! Component: 200 - total flux cleaned = 0.0147365 Jy ! Total flux subtracted in 200 components = 0.0147365 Jy ! Clean residual min=-0.002179 max=0.001863 Jy/beam ! Clean residual mean=-0.000003 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.190155 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 84 components and 0.190155 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.42 mas, bmaj=11.22 mas, bpa=0.7349 degrees ! Estimated noise=0.479446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327149 Jy ! Component: 100 - total flux cleaned = 0.00546148 Jy ! Component: 150 - total flux cleaned = 0.00701439 Jy ! Component: 200 - total flux cleaned = 0.00816991 Jy ! Total flux subtracted in 200 components = 0.00816991 Jy ! Clean residual min=-0.001806 max=0.001700 Jy/beam ! Clean residual mean=0.000001 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.198325 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648921 Jy ! Component: 100 - total flux cleaned = 0.00108766 Jy ! Component: 150 - total flux cleaned = 0.00147474 Jy ! Component: 200 - total flux cleaned = 0.00177716 Jy ! Total flux subtracted in 200 components = 0.00177716 Jy ! Clean residual min=-0.001680 max=0.001837 Jy/beam ! Clean residual mean=0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.200102 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 177 components and 0.200102 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.561 mas, bpa=-6.383 degrees ! Estimated noise=0.369704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572637 Jy ! Component: 100 - total flux cleaned = 0.00069751 Jy ! Component: 150 - total flux cleaned = 0.000775692 Jy ! Component: 200 - total flux cleaned = 0.00084515 Jy ! Total flux subtracted in 200 components = 0.00084515 Jy ! Clean residual min=-0.001745 max=0.001736 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.200948 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 198 components and 0.200948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060654Jy sigma=1.306543 ! Fit after self-cal, rms=0.060656Jy sigma=1.306448 wmodel /J2214+0711_S_map.mod ! wmodel: Unable to open new model file: /J2214+0711_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219i_uvs/J2214+0711_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 7.561 at -6.383 degrees (North through East) ! Clean map min=-0.0017041 max=0.16784 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2214+0711_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.167842 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000422492 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.755159 0.755159 1.51032 3.02064 6.04127 12.0825 24.1651 48.3302 96.6604 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.167 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 397.267 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J2214+0711_S_dfm.log closed on Thu May 19 23:39:58 2016