! Started logfile: /scr/pima/bg219i_uvs/J2212+2759_X_dfm.log on Thu May 19 23:39:52 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2212+2759_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2212+2759_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.887097 visibilities/baseline/integration-bin.
! Found source: J2212+2759
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29700 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2212+2759_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007939Jy  sigma=23.698918
! Fit after  self-cal, rms=0.893739Jy  sigma=21.010007
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8235 mas, bmaj=1.282 mas, bpa=-6.537 degrees
! Estimated noise=0.420822 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0819133 Jy
! Component: 100  -  total flux cleaned = 0.102046 Jy
! Total flux subtracted in 100 components = 0.102046 Jy
! Clean residual min=-0.003595 max=0.007960 Jy/beam
! Clean residual mean=-0.000002 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.102046 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.102046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065026Jy  sigma=1.427469
! Fit after  self-cal, rms=0.064897Jy  sigma=1.424568
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00855727 Jy
! Component: 100  -  total flux cleaned = 0.0125444 Jy
! Total flux subtracted in 100 components = 0.0125444 Jy
! Clean residual min=-0.002764 max=0.003220 Jy/beam
! Clean residual mean=-0.000002 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.11459 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.11459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063674Jy  sigma=1.391096
! Fit after  self-cal, rms=0.063653Jy  sigma=1.390450
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=1.59 mas, bpa=-7.052 degrees
! Estimated noise=0.190544 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00445645 Jy
! Component: 100  -  total flux cleaned = 0.0068274 Jy
! Component: 150  -  total flux cleaned = 0.00802744 Jy
! Component: 200  -  total flux cleaned = 0.00857153 Jy
! Total flux subtracted in 200 components = 0.00857153 Jy
! Clean residual min=-0.001636 max=0.002836 Jy/beam
! Clean residual mean=-0.000005 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.123162 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 43 components and 0.123162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063364Jy  sigma=1.381799
! Fit after  self-cal, rms=0.063332Jy  sigma=1.380980
! Inverting map 
! Added new window around map position (-0.8, -9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267833 Jy
! Component: 100  -  total flux cleaned = 0.00440297 Jy
! Component: 150  -  total flux cleaned = 0.00574679 Jy
! Component: 200  -  total flux cleaned = 0.00681483 Jy
! Total flux subtracted in 200 components = 0.00681483 Jy
! Clean residual min=-0.001367 max=0.001504 Jy/beam
! Clean residual mean=-0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.129977 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 73 components and 0.129977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063198Jy  sigma=1.377320
! Fit after  self-cal, rms=0.063190Jy  sigma=1.377157
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.076 x 1.59 at -7.052 degrees (North through East)
! Clean map  min=-0.0013256  max=0.10681 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.98     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.01     KP        1.01     
!   LA        1.00     MK        1.03     NL        1.03     OV        0.99     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.98     MK        0.99     NL        0.98     OV        0.95     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.02     KP        1.02     
!   LA        0.98     MK        0.98     NL        0.99     OV        0.96     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.99     KP        1.02     
!   LA        0.97     MK        0.95     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.03     KP        1.00     
!   LA        0.99     MK        0.99     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.02     KP        1.00     
!   LA        1.01     MK        0.97     NL        1.01     OV        0.97     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.03     KP        1.03     
!   LA        0.96     MK        0.98     NL        0.98     OV        0.95     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.00     KP        0.99     
!   LA        0.99     MK        0.97     NL        1.03     OV        0.97     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.01     
!   LA        0.93     MK        0.94     NL        1.01     OV        0.98     
!   PT        1.01     SC        1.08     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.99     KP        0.98     
!   LA        0.97     MK        0.95     NL        1.02     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.01     KP        1.00     
!   LA        1.00     MK        0.97     NL        1.02     OV        0.97     
!   PT        0.95     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.063190Jy  sigma=1.377157
! Fit after  self-cal, rms=0.062941Jy  sigma=1.374103
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.074 mas, bmaj=1.596 mas, bpa=-7.715 degrees
! Estimated noise=0.189195 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000751132 Jy
! Component: 100  -  total flux cleaned = 0.00119993 Jy
! Component: 150  -  total flux cleaned = 0.00154008 Jy
! Component: 200  -  total flux cleaned = 0.00182856 Jy
! Total flux subtracted in 200 components = 0.00182856 Jy
! Clean residual min=-0.001307 max=0.001293 Jy/beam
! Clean residual mean=-0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.131805 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 106 components and 0.131805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062914Jy  sigma=1.373468
! Fit after  self-cal, rms=0.062932Jy  sigma=1.373395
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062932Jy  sigma=1.373395
! Fit after  self-cal, rms=0.063251Jy  sigma=1.370367
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=1.594 mas, bpa=-6.871 degrees
! Estimated noise=0.189217 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411695 Jy
! Component: 100  -  total flux cleaned = 0.000647977 Jy
! Component: 150  -  total flux cleaned = 0.000842488 Jy
! Component: 200  -  total flux cleaned = 0.000966603 Jy
! Total flux subtracted in 200 components = 0.000966603 Jy
! Clean residual min=-0.001192 max=0.000993 Jy/beam
! Clean residual mean=-0.000001 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.132772 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 115 components and 0.132772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063242Jy  sigma=1.370118
! Fit after  self-cal, rms=0.063253Jy  sigma=1.370066
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155468 Jy
! Component: 100  -  total flux cleaned = 0.000236051 Jy
! Component: 150  -  total flux cleaned = 0.000297594 Jy
! Component: 200  -  total flux cleaned = 0.000343507 Jy
! Total flux subtracted in 200 components = 0.000343507 Jy
! Clean residual min=-0.001195 max=0.000985 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.133115 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 122 components and 0.133115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063250Jy  sigma=1.369986
! Fit after  self-cal, rms=0.063249Jy  sigma=1.369981
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063249Jy  sigma=1.369981
! Fit after  self-cal, rms=0.063292Jy  sigma=1.369946
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.077 mas, bmaj=1.596 mas, bpa=-6.807 degrees
! Estimated noise=0.189029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.81818e-05 Jy
! Component: 100  -  total flux cleaned = -2.85444e-05 Jy
! Component: 150  -  total flux cleaned = 8.17356e-06 Jy
! Component: 200  -  total flux cleaned = 4.16796e-05 Jy
! Total flux subtracted in 200 components = 4.16796e-05 Jy
! Clean residual min=-0.001160 max=0.000958 Jy/beam
! Clean residual mean=-0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.133157 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 127 components and 0.133157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063289Jy  sigma=1.369880
! Fit after  self-cal, rms=0.063291Jy  sigma=1.369872
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.98351e-05 Jy
! Component: 100  -  total flux cleaned = 9.79257e-05 Jy
! Component: 150  -  total flux cleaned = 0.000126207 Jy
! Component: 200  -  total flux cleaned = 0.00015264 Jy
! Total flux subtracted in 200 components = 0.00015264 Jy
! Clean residual min=-0.001157 max=0.000959 Jy/beam
! Clean residual mean=-0.000000 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.13331 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 134 components and 0.13331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063289Jy  sigma=1.369845
! Fit after  self-cal, rms=0.063289Jy  sigma=1.369841
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063289Jy  sigma=1.369841
! Fit after  self-cal, rms=0.063299Jy  sigma=1.369825
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.165 mas, bmaj=2.633 mas, bpa=-0.1288 degrees
! Estimated noise=0.22714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141805 Jy
! Component: 100  -  total flux cleaned = -8.8099e-05 Jy
! Component: 150  -  total flux cleaned = -7.50381e-06 Jy
! Component: 200  -  total flux cleaned = 3.7586e-05 Jy
! Total flux subtracted in 200 components = 3.7586e-05 Jy
! Clean residual min=-0.001152 max=0.001109 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.133347 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 142 components and 0.133347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063299Jy  sigma=1.369791
! Fit after  self-cal, rms=0.063299Jy  sigma=1.369789
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.8265e-05 Jy
! Component: 100  -  total flux cleaned = 5.81946e-06 Jy
! Component: 150  -  total flux cleaned = 3.59147e-05 Jy
! Component: 200  -  total flux cleaned = 5.80931e-05 Jy
! Total flux subtracted in 200 components = 5.80931e-05 Jy
! Clean residual min=-0.001159 max=0.001095 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.133405 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 150 components and 0.133405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063300Jy  sigma=1.369788
! Fit after  self-cal, rms=0.063299Jy  sigma=1.369787
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=1.597 mas, bpa=-6.738 degrees
! Estimated noise=0.188853 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.078 x 1.597 at -6.738 degrees (North through East)
! Clean map  min=-0.0010799  max=0.10622 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8259 mas, bmaj=1.285 mas, bpa=-5.983 degrees
! Estimated noise=0.419366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0814365 Jy
! Component: 100  -  total flux cleaned = 0.101863 Jy
! Component: 150  -  total flux cleaned = 0.110372 Jy
! Component: 200  -  total flux cleaned = 0.114955 Jy
! Total flux subtracted in 200 components = 0.114955 Jy
! Clean residual min=-0.002563 max=0.002721 Jy/beam
! Clean residual mean=-0.000002 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.114955 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.114955 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=1.597 mas, bpa=-6.738 degrees
! Estimated noise=0.188853 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00392658 Jy
! Component: 100  -  total flux cleaned = 0.00663464 Jy
! Component: 150  -  total flux cleaned = 0.00869741 Jy
! Component: 200  -  total flux cleaned = 0.0103696 Jy
! Total flux subtracted in 200 components = 0.0103696 Jy
! Clean residual min=-0.001420 max=0.001339 Jy/beam
! Clean residual mean=-0.000003 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.125325 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 54 components and 0.125325 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.165 mas, bmaj=2.633 mas, bpa=-0.1288 degrees
! Estimated noise=0.22714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225559 Jy
! Component: 100  -  total flux cleaned = 0.00380593 Jy
! Component: 150  -  total flux cleaned = 0.00494902 Jy
! Component: 200  -  total flux cleaned = 0.00563815 Jy
! Total flux subtracted in 200 components = 0.00563815 Jy
! Clean residual min=-0.001277 max=0.001198 Jy/beam
! Clean residual mean=-0.000002 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.130963 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000448429 Jy
! Component: 100  -  total flux cleaned = 0.000754477 Jy
! Component: 150  -  total flux cleaned = 0.000931681 Jy
! Component: 200  -  total flux cleaned = 0.00112766 Jy
! Total flux subtracted in 200 components = 0.00112766 Jy
! Clean residual min=-0.001188 max=0.001128 Jy/beam
! Clean residual mean=-0.000002 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.13209 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 112 components and 0.13209 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=1.597 mas, bpa=-6.738 degrees
! Estimated noise=0.188853 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145063 Jy
! Component: 100  -  total flux cleaned = 0.000313084 Jy
! Component: 150  -  total flux cleaned = 0.000488471 Jy
! Component: 200  -  total flux cleaned = 0.000611835 Jy
! Total flux subtracted in 200 components = 0.000611835 Jy
! Clean residual min=-0.001124 max=0.000965 Jy/beam
! Clean residual mean=-0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.132702 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 130 components and 0.132702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063312Jy  sigma=1.370025
! Fit after  self-cal, rms=0.063311Jy  sigma=1.369976
wmodel /J2212+2759_X_map.mod
! wmodel: Unable to open new model file: /J2212+2759_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2212+2759_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.078 x 1.597 at -6.738 degrees (North through East)
! Clean map  min=-0.0010707  max=0.10592 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2212+2759_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.105924 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000245727 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.695954 0.695954 1.39191 2.78382 5.56763 11.1353 22.2705 44.5411 89.0821
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.105 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  431.062 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2212+2759_X_dfm.log closed on Thu May 19 23:39:55 2016