! Started logfile: /scr/pima/bg219i_uvs/J2212+2355_X_dfm.log on Thu May 19 23:39:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2212+2355_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2212+2355_X_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.772222 visibilities/baseline/integration-bin.
! Found source: J2212+2355
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18348 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2212+2355_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.223007Jy  sigma=26.094984
! Fit after  self-cal, rms=0.336596Jy  sigma=7.094435
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8071 mas, bmaj=1.892 mas, bpa=19.83 degrees
! Estimated noise=0.450574 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.50579 Jy
! Component: 100  -  total flux cleaned = 0.624424 Jy
! Total flux subtracted in 100 components = 0.624424 Jy
! Clean residual min=-0.019696 max=0.047041 Jy/beam
! Clean residual mean=0.000026 rms=0.004422 Jy/beam
! Combined flux in latest and established models = 0.624424 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.624424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.132822Jy  sigma=2.752313
! Fit after  self-cal, rms=0.132800Jy  sigma=2.751626
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0553741 Jy
! Component: 100  -  total flux cleaned = 0.0899045 Jy
! Total flux subtracted in 100 components = 0.0899045 Jy
! Clean residual min=-0.012797 max=0.018467 Jy/beam
! Clean residual mean=0.000011 rms=0.002554 Jy/beam
! Combined flux in latest and established models = 0.714328 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.714328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093285Jy  sigma=1.875638
! Fit after  self-cal, rms=0.093155Jy  sigma=1.873038
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235062 Jy
! Component: 100  -  total flux cleaned = 0.0401671 Jy
! Total flux subtracted in 100 components = 0.0401671 Jy
! Clean residual min=-0.009468 max=0.010658 Jy/beam
! Clean residual mean=0.000004 rms=0.001977 Jy/beam
! Combined flux in latest and established models = 0.754495 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.754495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082186Jy  sigma=1.628706
! Fit after  self-cal, rms=0.082130Jy  sigma=1.627744
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9743 mas, bmaj=2.017 mas, bpa=14.91 degrees
! Estimated noise=0.259421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0240204 Jy
! Component: 100  -  total flux cleaned = 0.0360906 Jy
! Component: 150  -  total flux cleaned = 0.0434753 Jy
! Component: 200  -  total flux cleaned = 0.0484335 Jy
! Total flux subtracted in 200 components = 0.0484335 Jy
! Clean residual min=-0.006815 max=0.008224 Jy/beam
! Clean residual mean=0.000000 rms=0.001547 Jy/beam
! Combined flux in latest and established models = 0.802929 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 38 components and 0.802929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074603Jy  sigma=1.474038
! Fit after  self-cal, rms=0.074566Jy  sigma=1.473416
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9743 x 2.017 at 14.91 degrees (North through East)
! Clean map  min=-0.006252  max=0.68152 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.00     
!   LA        0.99     MK        1.02     NL        0.99     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.02     NL        0.99     OV        1.02     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.00     
!   LA        0.99     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.00     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.00     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.00     OV        1.02     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        1.00     
!   LA        0.99     MK        1.02     NL        0.99     OV        1.01     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.02     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.074566Jy  sigma=1.473416
! Fit after  self-cal, rms=0.074191Jy  sigma=1.451649
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9814 mas, bmaj=2.023 mas, bpa=14.71 degrees
! Estimated noise=0.260124 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00256803 Jy
! Component: 100  -  total flux cleaned = -0.00282881 Jy
! Component: 150  -  total flux cleaned = -0.00283008 Jy
! Component: 200  -  total flux cleaned = -0.00282861 Jy
! Total flux subtracted in 200 components = -0.00282861 Jy
! Clean residual min=-0.006293 max=0.006687 Jy/beam
! Clean residual mean=0.000001 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.8001 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 43 components and 0.8001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073668Jy  sigma=1.442876
! Fit after  self-cal, rms=0.073659Jy  sigma=1.442701
! Inverting map 
! Added new window around map position (13.6, -25.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000524254 Jy
! Component: 100  -  total flux cleaned = 0.000169384 Jy
! Component: 150  -  total flux cleaned = 0.000174431 Jy
! Component: 200  -  total flux cleaned = -5.88839e-05 Jy
! Total flux subtracted in 200 components = -5.88839e-05 Jy
! Clean residual min=-0.005669 max=0.005529 Jy/beam
! Clean residual mean=-0.000002 rms=0.001160 Jy/beam
! Combined flux in latest and established models = 0.800041 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 72 components and 0.800041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072744Jy  sigma=1.424952
! Fit after  self-cal, rms=0.072667Jy  sigma=1.422987
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072667Jy  sigma=1.422987
! Fit after  self-cal, rms=0.071710Jy  sigma=1.394241
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9812 mas, bmaj=2.021 mas, bpa=14.84 degrees
! Estimated noise=0.260857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000709456 Jy
! Component: 100  -  total flux cleaned = -0.000808908 Jy
! Component: 150  -  total flux cleaned = -0.00104108 Jy
! Component: 200  -  total flux cleaned = -0.00124319 Jy
! Total flux subtracted in 200 components = -0.00124319 Jy
! Clean residual min=-0.004957 max=0.004556 Jy/beam
! Clean residual mean=-0.000003 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.798798 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 84 components and 0.798798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071484Jy  sigma=1.389921
! Fit after  self-cal, rms=0.071479Jy  sigma=1.389635
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.095e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105607 Jy
! Component: 150  -  total flux cleaned = -5.10417e-05 Jy
! Component: 200  -  total flux cleaned = -5.6363e-06 Jy
! Total flux subtracted in 200 components = -5.6363e-06 Jy
! Clean residual min=-0.004816 max=0.004177 Jy/beam
! Clean residual mean=-0.000003 rms=0.000929 Jy/beam
! Combined flux in latest and established models = 0.798792 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 95 components and 0.798792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071393Jy  sigma=1.388158
! Fit after  self-cal, rms=0.071390Jy  sigma=1.388085
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071390Jy  sigma=1.388085
! Fit after  self-cal, rms=0.069538Jy  sigma=1.342461
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.981 mas, bmaj=2.022 mas, bpa=14.85 degrees
! Estimated noise=0.260801 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100147 Jy
! Component: 100  -  total flux cleaned = -0.00100102 Jy
! Component: 150  -  total flux cleaned = -0.000999785 Jy
! Component: 200  -  total flux cleaned = -0.000952042 Jy
! Total flux subtracted in 200 components = -0.000952042 Jy
! Clean residual min=-0.002755 max=0.002871 Jy/beam
! Clean residual mean=-0.000006 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.79784 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 110 components and 0.79784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069456Jy  sigma=1.340222
! Fit after  self-cal, rms=0.069451Jy  sigma=1.340126
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, 15.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024025 Jy
! Component: 100  -  total flux cleaned = 0.00355775 Jy
! Component: 150  -  total flux cleaned = 0.00452284 Jy
! Component: 200  -  total flux cleaned = 0.00488811 Jy
! Total flux subtracted in 200 components = 0.00488811 Jy
! Clean residual min=-0.002481 max=0.002367 Jy/beam
! Clean residual mean=-0.000003 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.802728 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 124 components and 0.802728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069272Jy  sigma=1.336504
! Fit after  self-cal, rms=0.069266Jy  sigma=1.336349
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069266Jy  sigma=1.336349
! Fit after  self-cal, rms=0.069240Jy  sigma=1.335995
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.996 mas, bmaj=2.676 mas, bpa=-0.4124 degrees
! Estimated noise=0.325641 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.17429e-05 Jy
! Component: 100  -  total flux cleaned = -2.56784e-05 Jy
! Component: 150  -  total flux cleaned = 9.59263e-05 Jy
! Component: 200  -  total flux cleaned = 0.000275592 Jy
! Total flux subtracted in 200 components = 0.000275592 Jy
! Clean residual min=-0.002264 max=0.002349 Jy/beam
! Clean residual mean=-0.000007 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.803004 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 141 components and 0.803004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069224Jy  sigma=1.335196
! Fit after  self-cal, rms=0.069219Jy  sigma=1.335120
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000100811 Jy
! Component: 100  -  total flux cleaned = 0.000263732 Jy
! Component: 150  -  total flux cleaned = 0.00041521 Jy
! Component: 200  -  total flux cleaned = 0.000555143 Jy
! Total flux subtracted in 200 components = 0.000555143 Jy
! Clean residual min=-0.002230 max=0.002251 Jy/beam
! Clean residual mean=-0.000006 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.803559 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 149 components and 0.803559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069207Jy  sigma=1.334599
! Fit after  self-cal, rms=0.069205Jy  sigma=1.334572
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9814 mas, bmaj=2.022 mas, bpa=14.84 degrees
! Estimated noise=0.260722 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9814 x 2.022 at 14.84 degrees (North through East)
! Clean map  min=-0.003426  max=0.68427 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069205Jy  sigma=1.334572
! Fit after  self-cal, rms=0.065293Jy  sigma=1.244909
! Inverting map and beam 
! Estimated beam: bmin=0.9819 mas, bmaj=2.023 mas, bpa=14.85 degrees
! Estimated noise=0.259764 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00201417 Jy
! Component: 100  -  total flux cleaned = -0.00247496 Jy
! Component: 150  -  total flux cleaned = -0.00257413 Jy
! Component: 200  -  total flux cleaned = -0.00257428 Jy
! Total flux subtracted in 200 components = -0.00257428 Jy
! Clean residual min=-0.002445 max=0.002234 Jy/beam
! Clean residual mean=-0.000004 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.800985 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 158 components and 0.800985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065144Jy  sigma=1.242687
! Fit after  self-cal, rms=0.065144Jy  sigma=1.242664
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.71695e-05 Jy
! Component: 100  -  total flux cleaned = 5.67433e-05 Jy
! Component: 150  -  total flux cleaned = 5.60632e-05 Jy
! Component: 200  -  total flux cleaned = 2.14896e-05 Jy
! Total flux subtracted in 200 components = 2.14896e-05 Jy
! Clean residual min=-0.002319 max=0.002241 Jy/beam
! Clean residual mean=-0.000003 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.801006 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 163 components and 0.801006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065095Jy  sigma=1.241879
! Fit after  self-cal, rms=0.065096Jy  sigma=1.241859
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065096Jy  sigma=1.241859
! Fit after  self-cal, rms=0.064867Jy  sigma=1.240683
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8132 mas, bmaj=1.894 mas, bpa=19.67 degrees
! Estimated noise=0.459891 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.516185 Jy
! Component: 100  -  total flux cleaned = 0.63683 Jy
! Component: 150  -  total flux cleaned = 0.691992 Jy
! Component: 200  -  total flux cleaned = 0.725552 Jy
! Total flux subtracted in 200 components = 0.725552 Jy
! Clean residual min=-0.010590 max=0.017695 Jy/beam
! Clean residual mean=0.000008 rms=0.002038 Jy/beam
! Combined flux in latest and established models = 0.725552 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.725552 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9819 mas, bmaj=2.023 mas, bpa=14.85 degrees
! Estimated noise=0.258861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0286485 Jy
! Component: 100  -  total flux cleaned = 0.0445448 Jy
! Component: 150  -  total flux cleaned = 0.0540383 Jy
! Component: 200  -  total flux cleaned = 0.0594075 Jy
! Total flux subtracted in 200 components = 0.0594075 Jy
! Clean residual min=-0.004433 max=0.005283 Jy/beam
! Clean residual mean=-0.000002 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.78496 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 37 components and 0.78496 Jy
! Inverting map 
! Added new window around map position (-0.8, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00388499 Jy
! Component: 100  -  total flux cleaned = 0.00583603 Jy
! Component: 150  -  total flux cleaned = 0.00740347 Jy
! Component: 200  -  total flux cleaned = 0.0085343 Jy
! Total flux subtracted in 200 components = 0.0085343 Jy
! Clean residual min=-0.003689 max=0.003548 Jy/beam
! Clean residual mean=-0.000002 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.793494 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 59 components and 0.793494 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.996 mas, bmaj=2.677 mas, bpa=-0.3849 degrees
! Estimated noise=0.323224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267898 Jy
! Component: 100  -  total flux cleaned = 0.00385427 Jy
! Component: 150  -  total flux cleaned = 0.00417594 Jy
! Component: 200  -  total flux cleaned = 0.00446179 Jy
! Total flux subtracted in 200 components = 0.00446179 Jy
! Clean residual min=-0.002502 max=0.002974 Jy/beam
! Clean residual mean=-0.000005 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.797956 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17.4, -31.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212413 Jy
! Component: 100  -  total flux cleaned = 0.00275627 Jy
! Component: 150  -  total flux cleaned = 0.00323851 Jy
! Component: 200  -  total flux cleaned = 0.00343356 Jy
! Total flux subtracted in 200 components = 0.00343356 Jy
! Clean residual min=-0.002348 max=0.002220 Jy/beam
! Clean residual mean=-0.000000 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.801389 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 113 components and 0.801389 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9819 mas, bmaj=2.023 mas, bpa=14.85 degrees
! Estimated noise=0.258861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000209197 Jy
! Component: 100  -  total flux cleaned = -0.000208379 Jy
! Component: 150  -  total flux cleaned = -0.00020848 Jy
! Component: 200  -  total flux cleaned = -0.000205525 Jy
! Total flux subtracted in 200 components = -0.000205525 Jy
! Clean residual min=-0.003187 max=0.002567 Jy/beam
! Clean residual mean=0.000000 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.801184 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 125 components and 0.801184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065528Jy  sigma=1.251481
! Fit after  self-cal, rms=0.065486Jy  sigma=1.250589
wmodel /J2212+2355_X_map.mod
! wmodel: Unable to open new model file: /J2212+2355_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2212+2355_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9819 x 2.023 at 14.85 degrees (North through East)
! Clean map  min=-0.0028883  max=0.68041 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2212+2355_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.680406 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000577998 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.254847 0.254847 0.509694 1.01939 2.03878 4.07755 8.15511 16.3102 32.6204 65.2409
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.68 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1177.18 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2212+2355_X_dfm.log closed on Thu May 19 23:39:47 2016