! Started logfile: /scr/pima/bg219i_uvs/J2212+0819_X_dfm.log on Thu May 19 23:39:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2212+0819_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2212+0819_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.926923 visibilities/baseline/integration-bin.
! Found source: J2212+0819
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26028 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2212+0819_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036634Jy  sigma=22.950975
! Fit after  self-cal, rms=0.751759Jy  sigma=16.505599
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.664 mas, bmaj=1.658 mas, bpa=-4.855 degrees
! Estimated noise=0.379426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.196954 Jy
! Component: 100  -  total flux cleaned = 0.239903 Jy
! Total flux subtracted in 100 components = 0.239903 Jy
! Clean residual min=-0.005135 max=0.011987 Jy/beam
! Clean residual mean=0.000000 rms=0.001292 Jy/beam
! Combined flux in latest and established models = 0.239903 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.239903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074335Jy  sigma=1.472833
! Fit after  self-cal, rms=0.074324Jy  sigma=1.472766
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010706 Jy
! Component: 100  -  total flux cleaned = 0.0157846 Jy
! Total flux subtracted in 100 components = 0.0157846 Jy
! Clean residual min=-0.004587 max=0.008231 Jy/beam
! Clean residual mean=0.000001 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.255687 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.255687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073151Jy  sigma=1.425813
! Fit after  self-cal, rms=0.073155Jy  sigma=1.425709
! Inverting map 
! Added new window around map position (-3.2, -12.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00715718 Jy
! Component: 100  -  total flux cleaned = 0.010428 Jy
! Total flux subtracted in 100 components = 0.010428 Jy
! Clean residual min=-0.004213 max=0.004773 Jy/beam
! Clean residual mean=0.000000 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.266115 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.266115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072587Jy  sigma=1.411188
! Fit after  self-cal, rms=0.072547Jy  sigma=1.409987
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.866 mas, bmaj=1.958 mas, bpa=-4.073 degrees
! Estimated noise=0.213825 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.4, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00599159 Jy
! Component: 100  -  total flux cleaned = 0.00959415 Jy
! Component: 150  -  total flux cleaned = 0.0122995 Jy
! Component: 200  -  total flux cleaned = 0.0145027 Jy
! Total flux subtracted in 200 components = 0.0145027 Jy
! Clean residual min=-0.003619 max=0.004943 Jy/beam
! Clean residual mean=0.000001 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.280618 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 42 components and 0.280618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071916Jy  sigma=1.396778
! Fit after  self-cal, rms=0.071879Jy  sigma=1.395215
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.866 x 1.958 at -4.073 degrees (North through East)
! Clean map  min=-0.0034679  max=0.25144 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.12     HN        1.05     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.99     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.13     HN        1.02     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.98     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.13     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.01     OV        0.96     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.13     HN        0.98     KP        1.00     
!   LA        0.97     MK        1.01     NL        1.01     OV        0.97     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.11     HN        1.00     KP        0.99     
!   LA        0.98     MK        0.98     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.11     HN        1.01     KP        0.98     
!   LA        0.99     MK        1.02     NL        0.98     OV        0.97     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.11     HN        0.97     KP        0.96     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.99     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.12     HN        0.97     KP        0.99     
!   LA        0.97     MK        1.02     NL        0.97     OV        0.95     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        0.98     KP        0.97     
!   LA        0.98     MK        1.00     NL        0.98     OV        0.95     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.11     HN        0.99     KP        0.97     
!   LA        1.00     MK        0.98     NL        0.99     OV        0.95     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        1.00     KP        0.97     
!   LA        0.98     MK        1.01     NL        1.00     OV        0.96     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.14     HN        1.00     KP        0.97     
!   LA        0.97     MK        1.01     NL        0.98     OV        0.96     
!   PT        1.00     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.071879Jy  sigma=1.395215
! Fit after  self-cal, rms=0.072693Jy  sigma=1.372026
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8653 mas, bmaj=1.953 mas, bpa=-3.935 degrees
! Estimated noise=0.213172 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.8, -8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171569 Jy
! Component: 100  -  total flux cleaned = 0.00233391 Jy
! Component: 150  -  total flux cleaned = 0.00262934 Jy
! Component: 200  -  total flux cleaned = 0.00275123 Jy
! Total flux subtracted in 200 components = 0.00275123 Jy
! Clean residual min=-0.001729 max=0.001657 Jy/beam
! Clean residual mean=0.000000 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.283369 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 66 components and 0.283369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072602Jy  sigma=1.369294
! Fit after  self-cal, rms=0.072653Jy  sigma=1.369093
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072653Jy  sigma=1.369093
! Fit after  self-cal, rms=0.072841Jy  sigma=1.365574
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8651 mas, bmaj=1.952 mas, bpa=-3.936 degrees
! Estimated noise=0.213033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166944 Jy
! Component: 100  -  total flux cleaned = -0.000163231 Jy
! Component: 150  -  total flux cleaned = -0.000130913 Jy
! Component: 200  -  total flux cleaned = -0.000188314 Jy
! Total flux subtracted in 200 components = -0.000188314 Jy
! Clean residual min=-0.001381 max=0.001469 Jy/beam
! Clean residual mean=-0.000000 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.283181 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.283181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072807Jy  sigma=1.364735
! Fit after  self-cal, rms=0.072809Jy  sigma=1.364691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.6, 23.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113505 Jy
! Component: 100  -  total flux cleaned = 0.00123005 Jy
! Component: 150  -  total flux cleaned = 0.00131186 Jy
! Component: 200  -  total flux cleaned = 0.00133617 Jy
! Total flux subtracted in 200 components = 0.00133617 Jy
! Clean residual min=-0.001324 max=0.001133 Jy/beam
! Clean residual mean=-0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.284517 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 101 components and 0.284517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072779Jy  sigma=1.363969
! Fit after  self-cal, rms=0.072777Jy  sigma=1.363944
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072777Jy  sigma=1.363944
! Fit after  self-cal, rms=0.072835Jy  sigma=1.363848
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8646 mas, bmaj=1.952 mas, bpa=-3.939 degrees
! Estimated noise=0.212844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000341132 Jy
! Component: 100  -  total flux cleaned = -0.000317184 Jy
! Component: 150  -  total flux cleaned = -0.000272184 Jy
! Component: 200  -  total flux cleaned = -0.000209386 Jy
! Total flux subtracted in 200 components = -0.000209386 Jy
! Clean residual min=-0.001278 max=0.001094 Jy/beam
! Clean residual mean=-0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.284308 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 106 components and 0.284308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072820Jy  sigma=1.363501
! Fit after  self-cal, rms=0.072819Jy  sigma=1.363487
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.66999e-06 Jy
! Component: 100  -  total flux cleaned = 6.78202e-05 Jy
! Component: 150  -  total flux cleaned = 0.00012053 Jy
! Component: 200  -  total flux cleaned = 0.000103118 Jy
! Total flux subtracted in 200 components = 0.000103118 Jy
! Clean residual min=-0.001272 max=0.001082 Jy/beam
! Clean residual mean=-0.000000 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.284411 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 119 components and 0.284411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072809Jy  sigma=1.363305
! Fit after  self-cal, rms=0.072808Jy  sigma=1.363297
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072808Jy  sigma=1.363297
! Fit after  self-cal, rms=0.072852Jy  sigma=1.363252
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.148 mas, bmaj=3.124 mas, bpa=5.028 degrees
! Estimated noise=0.275604 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000526645 Jy
! Component: 100  -  total flux cleaned = -0.000743895 Jy
! Component: 150  -  total flux cleaned = -0.000852068 Jy
! Component: 200  -  total flux cleaned = -0.000928451 Jy
! Total flux subtracted in 200 components = -0.000928451 Jy
! Clean residual min=-0.001658 max=0.001326 Jy/beam
! Clean residual mean=-0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.283482 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 133 components and 0.283482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072849Jy  sigma=1.363165
! Fit after  self-cal, rms=0.072849Jy  sigma=1.363139
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000123996 Jy
! Component: 100  -  total flux cleaned = -0.000226125 Jy
! Component: 150  -  total flux cleaned = -0.000266587 Jy
! Component: 200  -  total flux cleaned = -0.000304199 Jy
! Total flux subtracted in 200 components = -0.000304199 Jy
! Clean residual min=-0.001627 max=0.001327 Jy/beam
! Clean residual mean=-0.000001 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.283178 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 141 components and 0.283178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072849Jy  sigma=1.363111
! Fit after  self-cal, rms=0.072848Jy  sigma=1.363104
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8643 mas, bmaj=1.952 mas, bpa=-3.95 degrees
! Estimated noise=0.212719 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8643 x 1.952 at -3.95 degrees (North through East)
! Clean map  min=-0.0011741  max=0.25094 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6627 mas, bmaj=1.652 mas, bpa=-4.672 degrees
! Estimated noise=0.376957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195645 Jy
! Component: 100  -  total flux cleaned = 0.238308 Jy
! Component: 150  -  total flux cleaned = 0.249761 Jy
! Component: 200  -  total flux cleaned = 0.25632 Jy
! Total flux subtracted in 200 components = 0.25632 Jy
! Clean residual min=-0.002796 max=0.003690 Jy/beam
! Clean residual mean=-0.000000 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.25632 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.25632 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8643 mas, bmaj=1.952 mas, bpa=-3.95 degrees
! Estimated noise=0.212719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00521854 Jy
! Component: 100  -  total flux cleaned = 0.00877706 Jy
! Component: 150  -  total flux cleaned = 0.0115733 Jy
! Component: 200  -  total flux cleaned = 0.0138845 Jy
! Total flux subtracted in 200 components = 0.0138845 Jy
! Clean residual min=-0.001663 max=0.002478 Jy/beam
! Clean residual mean=-0.000001 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.270204 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 39 components and 0.270205 Jy
! Inverting map 
! Added new window around map position (-0.6, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231441 Jy
! Component: 100  -  total flux cleaned = 0.00402404 Jy
! Component: 150  -  total flux cleaned = 0.00549582 Jy
! Component: 200  -  total flux cleaned = 0.00677521 Jy
! Total flux subtracted in 200 components = 0.00677521 Jy
! Clean residual min=-0.001313 max=0.001349 Jy/beam
! Clean residual mean=-0.000001 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.27698 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 63 components and 0.27698 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.148 mas, bmaj=3.124 mas, bpa=5.028 degrees
! Estimated noise=0.275604 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173472 Jy
! Component: 100  -  total flux cleaned = 0.00299336 Jy
! Component: 150  -  total flux cleaned = 0.00375049 Jy
! Component: 200  -  total flux cleaned = 0.00424163 Jy
! Total flux subtracted in 200 components = 0.00424163 Jy
! Clean residual min=-0.001476 max=0.001283 Jy/beam
! Clean residual mean=-0.000001 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.281221 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030866 Jy
! Component: 100  -  total flux cleaned = 0.000555127 Jy
! Component: 150  -  total flux cleaned = 0.00079478 Jy
! Component: 200  -  total flux cleaned = 0.000968887 Jy
! Total flux subtracted in 200 components = 0.000968887 Jy
! Clean residual min=-0.001416 max=0.001241 Jy/beam
! Clean residual mean=-0.000001 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.28219 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 106 components and 0.28219 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8643 mas, bmaj=1.952 mas, bpa=-3.95 degrees
! Estimated noise=0.212719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217235 Jy
! Component: 100  -  total flux cleaned = 0.000271997 Jy
! Component: 150  -  total flux cleaned = 0.000371602 Jy
! Component: 200  -  total flux cleaned = 0.000416781 Jy
! Total flux subtracted in 200 components = 0.000416781 Jy
! Clean residual min=-0.001239 max=0.001147 Jy/beam
! Clean residual mean=-0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.282607 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 127 components and 0.282607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072838Jy  sigma=1.363056
! Fit after  self-cal, rms=0.072828Jy  sigma=1.362956
wmodel /J2212+0819_X_map.mod
! wmodel: Unable to open new model file: /J2212+0819_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2212+0819_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8643 x 1.952 at -3.95 degrees (North through East)
! Clean map  min=-0.0011368  max=0.25156 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2212+0819_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.251564 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000277373 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.330778 0.330778 0.661556 1.32311 2.64622 5.29245 10.5849 21.1698 42.3396 84.6791
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.251 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  906.953 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2212+0819_X_dfm.log closed on Thu May 19 23:39:38 2016