! Started logfile: /scr/pima/bg219i_uvs/J2212+0646_X_dfm.log on Thu May 19 23:39:28 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2212+0646_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2212+0646_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.896032 visibilities/baseline/integration-bin.
! Found source: J2212+0646
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13548 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2212+0646_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.046203Jy  sigma=22.614770
! Fit after  self-cal, rms=0.719543Jy  sigma=15.431988
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6754 mas, bmaj=1.709 mas, bpa=-5.233 degrees
! Estimated noise=0.483771 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221064 Jy
! Component: 100  -  total flux cleaned = 0.269271 Jy
! Total flux subtracted in 100 components = 0.269271 Jy
! Clean residual min=-0.004886 max=0.013448 Jy/beam
! Clean residual mean=0.000000 rms=0.001431 Jy/beam
! Combined flux in latest and established models = 0.269271 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.269271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073891Jy  sigma=1.449418
! Fit after  self-cal, rms=0.073881Jy  sigma=1.449335
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126584 Jy
! Component: 100  -  total flux cleaned = 0.0180258 Jy
! Total flux subtracted in 100 components = 0.0180258 Jy
! Clean residual min=-0.004326 max=0.006796 Jy/beam
! Clean residual mean=0.000000 rms=0.001097 Jy/beam
! Combined flux in latest and established models = 0.287296 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.287296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072067Jy  sigma=1.386205
! Fit after  self-cal, rms=0.072057Jy  sigma=1.386035
! Inverting map 
! Added new window around map position (5.8, -2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00571492 Jy
! Component: 100  -  total flux cleaned = 0.00882206 Jy
! Total flux subtracted in 100 components = 0.00882206 Jy
! Clean residual min=-0.004558 max=0.006080 Jy/beam
! Clean residual mean=0.000001 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.296118 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.296118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071595Jy  sigma=1.376722
! Fit after  self-cal, rms=0.071534Jy  sigma=1.374855
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8431 mas, bmaj=1.97 mas, bpa=-3.391 degrees
! Estimated noise=0.319113 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12.4, -15.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00539746 Jy
! Component: 100  -  total flux cleaned = 0.00820126 Jy
! Component: 150  -  total flux cleaned = 0.00929284 Jy
! Component: 200  -  total flux cleaned = 0.00960924 Jy
! Total flux subtracted in 200 components = 0.00960924 Jy
! Clean residual min=-0.003592 max=0.005232 Jy/beam
! Clean residual mean=-0.000001 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.305728 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 39 components and 0.305728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071065Jy  sigma=1.365631
! Fit after  self-cal, rms=0.071030Jy  sigma=1.364280
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8431 x 1.97 at -3.391 degrees (North through East)
! Clean map  min=-0.0034157  max=0.2826 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.11     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.03     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.12     HN        1.05     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.03     OV        0.97     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        0.99     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.97     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.13     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.03     OV        0.96     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.02     OV        0.97     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.12     HN        1.01     KP        0.99     
!   LA        0.98     MK        0.99     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.12     HN        1.00     KP        0.96     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.10     HN        0.97     KP        0.98     
!   LA        0.98     MK        1.03     NL        1.01     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        0.95     KP        1.00     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.96     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     HN        1.00     KP        0.98     
!   LA        0.97     MK        1.01     NL        1.01     OV        0.96     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.13     HN        0.97     KP        0.97     
!   LA        0.99     MK        0.99     NL        0.99     OV        0.95     
!   PT        0.99     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.071030Jy  sigma=1.364280
! Fit after  self-cal, rms=0.071567Jy  sigma=1.339226
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8427 mas, bmaj=1.969 mas, bpa=-3.227 degrees
! Estimated noise=0.319361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00211455 Jy
! Component: 100  -  total flux cleaned = -0.00324237 Jy
! Component: 150  -  total flux cleaned = -0.0037998 Jy
! Component: 200  -  total flux cleaned = -0.00432129 Jy
! Total flux subtracted in 200 components = -0.00432129 Jy
! Clean residual min=-0.002410 max=0.002323 Jy/beam
! Clean residual mean=-0.000001 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.301406 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 66 components and 0.301406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071489Jy  sigma=1.337453
! Fit after  self-cal, rms=0.071524Jy  sigma=1.337210
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071524Jy  sigma=1.337210
! Fit after  self-cal, rms=0.071823Jy  sigma=1.329976
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8417 mas, bmaj=1.968 mas, bpa=-3.227 degrees
! Estimated noise=0.319193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00155704 Jy
! Component: 100  -  total flux cleaned = -0.0023577 Jy
! Component: 150  -  total flux cleaned = -0.00264544 Jy
! Component: 200  -  total flux cleaned = -0.0028852 Jy
! Total flux subtracted in 200 components = -0.0028852 Jy
! Clean residual min=-0.002059 max=0.001744 Jy/beam
! Clean residual mean=-0.000001 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.298521 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 85 components and 0.298521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071778Jy  sigma=1.329088
! Fit after  self-cal, rms=0.071782Jy  sigma=1.328948
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000552517 Jy
! Component: 100  -  total flux cleaned = -0.000681572 Jy
! Component: 150  -  total flux cleaned = -0.000739363 Jy
! Component: 200  -  total flux cleaned = -0.000810249 Jy
! Total flux subtracted in 200 components = -0.000810249 Jy
! Clean residual min=-0.001968 max=0.001770 Jy/beam
! Clean residual mean=-0.000001 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.297711 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 90 components and 0.297711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071769Jy  sigma=1.328692
! Fit after  self-cal, rms=0.071767Jy  sigma=1.328674
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071767Jy  sigma=1.328674
! Fit after  self-cal, rms=0.072009Jy  sigma=1.328426
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8413 mas, bmaj=1.968 mas, bpa=-3.234 degrees
! Estimated noise=0.319081 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000877829 Jy
! Component: 100  -  total flux cleaned = -0.00116246 Jy
! Component: 150  -  total flux cleaned = -0.00131651 Jy
! Component: 200  -  total flux cleaned = -0.00140196 Jy
! Total flux subtracted in 200 components = -0.00140196 Jy
! Clean residual min=-0.001913 max=0.001712 Jy/beam
! Clean residual mean=-0.000001 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.296309 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 92 components and 0.296309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071992Jy  sigma=1.328113
! Fit after  self-cal, rms=0.071995Jy  sigma=1.328079
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0002812 Jy
! Component: 100  -  total flux cleaned = -0.000329958 Jy
! Component: 150  -  total flux cleaned = -0.000344375 Jy
! Component: 200  -  total flux cleaned = -0.000358809 Jy
! Total flux subtracted in 200 components = -0.000358809 Jy
! Clean residual min=-0.001890 max=0.001724 Jy/beam
! Clean residual mean=-0.000001 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.29595 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 100 components and 0.29595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071988Jy  sigma=1.327945
! Fit after  self-cal, rms=0.071987Jy  sigma=1.327938
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071987Jy  sigma=1.327938
! Fit after  self-cal, rms=0.072134Jy  sigma=1.327861
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.121 mas, bpa=6.041 degrees
! Estimated noise=0.41756 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0004105 Jy
! Component: 100  -  total flux cleaned = -0.000667054 Jy
! Component: 150  -  total flux cleaned = -0.000690091 Jy
! Component: 200  -  total flux cleaned = -0.000690957 Jy
! Total flux subtracted in 200 components = -0.000690957 Jy
! Clean residual min=-0.002545 max=0.002270 Jy/beam
! Clean residual mean=-0.000002 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.295259 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 107 components and 0.295259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072133Jy  sigma=1.327776
! Fit after  self-cal, rms=0.072133Jy  sigma=1.327740
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.72051e-05 Jy
! Component: 100  -  total flux cleaned = -0.000115534 Jy
! Component: 150  -  total flux cleaned = -0.000116376 Jy
! Component: 200  -  total flux cleaned = -8.80814e-05 Jy
! Total flux subtracted in 200 components = -8.80814e-05 Jy
! Clean residual min=-0.002554 max=0.002283 Jy/beam
! Clean residual mean=-0.000002 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.295171 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 109 components and 0.295171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072138Jy  sigma=1.327811
! Fit after  self-cal, rms=0.072136Jy  sigma=1.327793
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.841 mas, bmaj=1.967 mas, bpa=-3.244 degrees
! Estimated noise=0.319017 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.841 x 1.967 at -3.244 degrees (North through East)
! Clean map  min=-0.001826  max=0.2832 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6738 mas, bmaj=1.703 mas, bpa=-5.071 degrees
! Estimated noise=0.483443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.220884 Jy
! Component: 100  -  total flux cleaned = 0.269051 Jy
! Component: 150  -  total flux cleaned = 0.281937 Jy
! Component: 200  -  total flux cleaned = 0.287676 Jy
! Total flux subtracted in 200 components = 0.287676 Jy
! Clean residual min=-0.003062 max=0.003227 Jy/beam
! Clean residual mean=0.000000 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.287677 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.287677 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.841 mas, bmaj=1.967 mas, bpa=-3.244 degrees
! Estimated noise=0.319017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380468 Jy
! Component: 100  -  total flux cleaned = 0.0056866 Jy
! Component: 150  -  total flux cleaned = 0.00654524 Jy
! Component: 200  -  total flux cleaned = 0.00719729 Jy
! Total flux subtracted in 200 components = 0.00719729 Jy
! Clean residual min=-0.002208 max=0.001923 Jy/beam
! Clean residual mean=-0.000001 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.294874 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 28 components and 0.294874 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.121 mas, bpa=6.041 degrees
! Estimated noise=0.41756 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125688 Jy
! Component: 100  -  total flux cleaned = 0.00103668 Jy
! Component: 150  -  total flux cleaned = 0.00084979 Jy
! Component: 200  -  total flux cleaned = 0.000732736 Jy
! Total flux subtracted in 200 components = 0.000732736 Jy
! Clean residual min=-0.002502 max=0.002358 Jy/beam
! Clean residual mean=-0.000002 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.295607 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.58825e-05 Jy
! Component: 100  -  total flux cleaned = -0.000144211 Jy
! Component: 150  -  total flux cleaned = -0.000162342 Jy
! Component: 200  -  total flux cleaned = -0.000195386 Jy
! Total flux subtracted in 200 components = -0.000195386 Jy
! Clean residual min=-0.002509 max=0.002331 Jy/beam
! Clean residual mean=-0.000002 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.295411 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 46 components and 0.295411 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.841 mas, bmaj=1.967 mas, bpa=-3.244 degrees
! Estimated noise=0.319017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.3572e-05 Jy
! Component: 100  -  total flux cleaned = 5.87443e-05 Jy
! Component: 150  -  total flux cleaned = -2.33432e-05 Jy
! Component: 200  -  total flux cleaned = -4.84389e-05 Jy
! Total flux subtracted in 200 components = -4.84389e-05 Jy
! Clean residual min=-0.001929 max=0.001816 Jy/beam
! Clean residual mean=-0.000001 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.295363 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 67 components and 0.295363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072162Jy  sigma=1.328406
! Fit after  self-cal, rms=0.072154Jy  sigma=1.328218
wmodel /J2212+0646_X_map.mod
! wmodel: Unable to open new model file: /J2212+0646_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2212+0646_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.841 x 1.967 at -3.244 degrees (North through East)
! Clean map  min=-0.0017493  max=0.28394 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2212+0646_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.283936 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000451327 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.476862 0.476862 0.953725 1.90745 3.8149 7.6298 15.2596 30.5192 61.0384
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.283 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  629.112 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2212+0646_X_dfm.log closed on Thu May 19 23:39:30 2016