! Started logfile: /scr/pima/bg219i_uvs/J2210+0857_X_dfm.log on Thu May 19 23:39:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2210+0857_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2210+0857_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.878927 visibilities/baseline/integration-bin.
! Found source: J2210+0857
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 27528 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2210+0857_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006644Jy  sigma=23.083500
! Fit after  self-cal, rms=0.927444Jy  sigma=21.267854
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6789 mas, bmaj=1.737 mas, bpa=-2.28 degrees
! Estimated noise=0.382154 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0500903 Jy
! Component: 100  -  total flux cleaned = 0.0684173 Jy
! Total flux subtracted in 100 components = 0.0684173 Jy
! Clean residual min=-0.005165 max=0.014574 Jy/beam
! Clean residual mean=-0.000002 rms=0.001377 Jy/beam
! Combined flux in latest and established models = 0.0684173 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0684173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076735Jy  sigma=1.606127
! Fit after  self-cal, rms=0.075762Jy  sigma=1.583143
! Inverting map 
! Added new window around map position (-1.2, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148136 Jy
! Component: 100  -  total flux cleaned = 0.0240689 Jy
! Total flux subtracted in 100 components = 0.0240689 Jy
! Clean residual min=-0.003819 max=0.005185 Jy/beam
! Clean residual mean=-0.000001 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 0.0924861 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 22 components and 0.0924861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071101Jy  sigma=1.463291
! Fit after  self-cal, rms=0.070831Jy  sigma=1.456456
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00838005 Jy
! Component: 100  -  total flux cleaned = 0.0140395 Jy
! Total flux subtracted in 100 components = 0.0140395 Jy
! Clean residual min=-0.003149 max=0.003308 Jy/beam
! Clean residual mean=-0.000001 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.106526 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 37 components and 0.106526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069154Jy  sigma=1.411971
! Fit after  self-cal, rms=0.069097Jy  sigma=1.410145
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8794 mas, bmaj=2.009 mas, bpa=-1.52 degrees
! Estimated noise=0.195073 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00827494 Jy
! Component: 100  -  total flux cleaned = 0.0136299 Jy
! Component: 150  -  total flux cleaned = 0.0172597 Jy
! Component: 200  -  total flux cleaned = 0.0197695 Jy
! Total flux subtracted in 200 components = 0.0197695 Jy
! Clean residual min=-0.001834 max=0.002638 Jy/beam
! Clean residual mean=-0.000003 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.126295 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 63 components and 0.126295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068021Jy  sigma=1.379410
! Fit after  self-cal, rms=0.067990Jy  sigma=1.378175
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8794 x 2.009 at -1.52 degrees (North through East)
! Clean map  min=-0.0016457  max=0.070261 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.01     KP        0.99     
!   LA        0.95     MK        1.13     NL        1.04     OV        0.94     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        0.99     KP        0.97     
!   LA        0.99     MK        1.07     NL        1.00     OV        0.96     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.08     HN        0.99     KP        0.96     
!   LA        0.93     MK        1.08     NL        1.01     OV        0.96     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.04     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.98     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.01     KP        0.97     
!   LA        0.94     MK        0.99     NL        1.07     OV        0.96     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.99     KP        0.97     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.93     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.98     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.02     OV        0.94     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.05     HN        0.97     KP        0.95     
!   LA        0.97     MK        1.08     NL        1.06     OV        0.96     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.01     KP        0.96     
!   LA        0.94     MK        0.95     NL        1.09     OV        0.97     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        1.05     KP        1.01     
!   LA        0.94     MK        0.98     NL        1.07     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.02     KP        0.96     
!   LA        0.97     MK        0.99     NL        1.04     OV        0.98     
!   PT        0.98     SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.98     KP        1.02     
!   LA        0.96     MK        0.88     NL        1.05     OV        0.96     
!   PT        0.94     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.067990Jy  sigma=1.378175
! Fit after  self-cal, rms=0.068368Jy  sigma=1.373213
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8857 mas, bmaj=2.026 mas, bpa=-1.488 degrees
! Estimated noise=0.193062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000645092 Jy
! Component: 100  -  total flux cleaned = 0.000699976 Jy
! Component: 150  -  total flux cleaned = 0.000678365 Jy
! Component: 200  -  total flux cleaned = 0.000676714 Jy
! Total flux subtracted in 200 components = 0.000676714 Jy
! Clean residual min=-0.001335 max=0.001509 Jy/beam
! Clean residual mean=-0.000001 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.126972 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 74 components and 0.126972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068350Jy  sigma=1.372568
! Fit after  self-cal, rms=0.068395Jy  sigma=1.372372
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068395Jy  sigma=1.372372
! Fit after  self-cal, rms=0.068674Jy  sigma=1.370437
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8836 mas, bmaj=2.025 mas, bpa=-1.56 degrees
! Estimated noise=0.19256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.68664e-05 Jy
! Component: 100  -  total flux cleaned = 9.55973e-05 Jy
! Component: 150  -  total flux cleaned = 0.000123283 Jy
! Component: 200  -  total flux cleaned = 0.000123438 Jy
! Total flux subtracted in 200 components = 0.000123438 Jy
! Clean residual min=-0.001201 max=0.001400 Jy/beam
! Clean residual mean=-0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.127095 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 80 components and 0.127095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068668Jy  sigma=1.370218
! Fit after  self-cal, rms=0.068689Jy  sigma=1.370135
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, -3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00088545 Jy
! Component: 100  -  total flux cleaned = 0.00104384 Jy
! Component: 150  -  total flux cleaned = 0.00121162 Jy
! Component: 200  -  total flux cleaned = 0.00132675 Jy
! Total flux subtracted in 200 components = 0.00132675 Jy
! Clean residual min=-0.001100 max=0.001128 Jy/beam
! Clean residual mean=-0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.128422 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.128422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068659Jy  sigma=1.369364
! Fit after  self-cal, rms=0.068657Jy  sigma=1.369254
! Inverting map 
! Added new window around map position (-49.8, -31.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000798906 Jy
! Component: 100  -  total flux cleaned = 0.000869625 Jy
! Component: 150  -  total flux cleaned = 0.000949478 Jy
! Component: 200  -  total flux cleaned = 0.00101958 Jy
! Total flux subtracted in 200 components = 0.00101958 Jy
! Clean residual min=-0.001078 max=0.001028 Jy/beam
! Clean residual mean=-0.000000 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.129442 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 115 components and 0.129442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068637Jy  sigma=1.368798
! Fit after  self-cal, rms=0.068638Jy  sigma=1.368747
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068638Jy  sigma=1.368747
! Fit after  self-cal, rms=0.068652Jy  sigma=1.368626
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8825 mas, bmaj=2.025 mas, bpa=-1.639 degrees
! Estimated noise=0.192185 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000558929 Jy
! Component: 100  -  total flux cleaned = 0.00063369 Jy
! Component: 150  -  total flux cleaned = 0.000650167 Jy
! Component: 200  -  total flux cleaned = 0.000665719 Jy
! Total flux subtracted in 200 components = 0.000665719 Jy
! Clean residual min=-0.001028 max=0.001000 Jy/beam
! Clean residual mean=-0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.130107 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 123 components and 0.130107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068643Jy  sigma=1.368397
! Fit after  self-cal, rms=0.068646Jy  sigma=1.368348
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269013 Jy
! Component: 100  -  total flux cleaned = 0.000299671 Jy
! Component: 150  -  total flux cleaned = 0.000313474 Jy
! Component: 200  -  total flux cleaned = 0.000313116 Jy
! Total flux subtracted in 200 components = 0.000313116 Jy
! Clean residual min=-0.001010 max=0.001007 Jy/beam
! Clean residual mean=-0.000000 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.130421 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 128 components and 0.130421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068641Jy  sigma=1.368213
! Fit after  self-cal, rms=0.068642Jy  sigma=1.368202
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068642Jy  sigma=1.368202
! Fit after  self-cal, rms=0.068610Jy  sigma=1.368183
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.149 mas, bmaj=3.096 mas, bpa=-1.044 degrees
! Estimated noise=0.245037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324825 Jy
! Component: 100  -  total flux cleaned = 0.000389421 Jy
! Component: 150  -  total flux cleaned = 0.000399263 Jy
! Component: 200  -  total flux cleaned = 0.000407288 Jy
! Total flux subtracted in 200 components = 0.000407288 Jy
! Clean residual min=-0.000910 max=0.001071 Jy/beam
! Clean residual mean=-0.000000 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.130828 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 153 components and 0.130828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068608Jy  sigma=1.368118
! Fit after  self-cal, rms=0.068610Jy  sigma=1.368115
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125725 Jy
! Component: 100  -  total flux cleaned = 0.000118464 Jy
! Component: 150  -  total flux cleaned = 0.000119026 Jy
! Component: 200  -  total flux cleaned = 0.000112942 Jy
! Total flux subtracted in 200 components = 0.000112942 Jy
! Clean residual min=-0.000903 max=0.001080 Jy/beam
! Clean residual mean=-0.000000 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.130941 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 159 components and 0.130941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068609Jy  sigma=1.368088
! Fit after  self-cal, rms=0.068608Jy  sigma=1.368085
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.024 mas, bpa=-1.672 degrees
! Estimated noise=0.191993 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.882 x 2.024 at -1.672 degrees (North through East)
! Clean map  min=-0.00087184  max=0.068839 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6801 mas, bmaj=1.745 mas, bpa=-2.382 degrees
! Estimated noise=0.378254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0496903 Jy
! Component: 100  -  total flux cleaned = 0.0723736 Jy
! Component: 150  -  total flux cleaned = 0.0864321 Jy
! Component: 200  -  total flux cleaned = 0.0962232 Jy
! Total flux subtracted in 200 components = 0.0962232 Jy
! Clean residual min=-0.003650 max=0.005480 Jy/beam
! Clean residual mean=-0.000001 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.0962231 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0962231 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.024 mas, bpa=-1.672 degrees
! Estimated noise=0.191993 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110727 Jy
! Component: 100  -  total flux cleaned = 0.0180235 Jy
! Component: 150  -  total flux cleaned = 0.0226614 Jy
! Component: 200  -  total flux cleaned = 0.0258818 Jy
! Total flux subtracted in 200 components = 0.0258818 Jy
! Clean residual min=-0.001448 max=0.001926 Jy/beam
! Clean residual mean=-0.000002 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.122105 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 55 components and 0.122105 Jy
! Inverting map 
! Added new window around map position (0.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237884 Jy
! Component: 100  -  total flux cleaned = 0.00420032 Jy
! Component: 150  -  total flux cleaned = 0.005624 Jy
! Component: 200  -  total flux cleaned = 0.00641246 Jy
! Total flux subtracted in 200 components = 0.00641246 Jy
! Clean residual min=-0.001119 max=0.001169 Jy/beam
! Clean residual mean=-0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.128517 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 76 components and 0.128517 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.149 mas, bmaj=3.096 mas, bpa=-1.044 degrees
! Estimated noise=0.245037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140526 Jy
! Component: 100  -  total flux cleaned = 0.00205841 Jy
! Component: 150  -  total flux cleaned = 0.00222119 Jy
! Component: 200  -  total flux cleaned = 0.00233705 Jy
! Total flux subtracted in 200 components = 0.00233705 Jy
! Clean residual min=-0.000966 max=0.001033 Jy/beam
! Clean residual mean=-0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.130854 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.63709e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109635 Jy
! Component: 150  -  total flux cleaned = 0.000153837 Jy
! Component: 200  -  total flux cleaned = 0.000154276 Jy
! Total flux subtracted in 200 components = 0.000154276 Jy
! Clean residual min=-0.000895 max=0.001050 Jy/beam
! Clean residual mean=-0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.131009 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 142 components and 0.131009 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.024 mas, bpa=-1.672 degrees
! Estimated noise=0.191993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361254 Jy
! Component: 100  -  total flux cleaned = -0.000358226 Jy
! Component: 150  -  total flux cleaned = -0.000268339 Jy
! Component: 200  -  total flux cleaned = -0.000227596 Jy
! Total flux subtracted in 200 components = -0.000227596 Jy
! Clean residual min=-0.000983 max=0.001049 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.130781 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 164 components and 0.130781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068623Jy  sigma=1.368327
! Fit after  self-cal, rms=0.068617Jy  sigma=1.368246
wmodel /J2210+0857_X_map.mod
! wmodel: Unable to open new model file: /J2210+0857_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2210+0857_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.882 x 2.024 at -1.672 degrees (North through East)
! Clean map  min=-0.00085634  max=0.068183 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2210+0857_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0681829 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000239293 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.05287 1.05287 2.10575 4.2115 8.423 16.846 33.692 67.384
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.068 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  284.934 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2210+0857_X_dfm.log closed on Thu May 19 23:39:07 2016