! Started logfile: /scr/pima/bg219i_uvs/J2200+2137_X_uvs.log on Wed Apr  6 23:57:22 2016
obs /scr/pima/bg219i_uvs/J2200+2137_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2200+2137_X_uva.fits
! AN table 1: 29 integrations on 28 of 28 possible baselines.
! AN table 2: 29 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.887931 visibilities/baseline/integration-bin.
! Found source: J2200+2137
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19776 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J2200+2137_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.013492Jy  sigma=24.121349
! Fit after  self-cal, rms=0.887145Jy  sigma=21.046091
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.184 mas, bmaj=2.617 mas, bpa=-3.191 degrees
! Estimated noise=0.510738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0856532 Jy
! Component: 100  -  total flux cleaned = 0.110006 Jy
! Total flux subtracted in 100 components = 0.110006 Jy
! Clean residual min=-0.008132 max=0.019888 Jy/beam
! Clean residual mean=0.000033 rms=0.002568 Jy/beam
! Combined flux in latest and established models = 0.110006 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.110006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071215Jy  sigma=1.588713
! Fit after  self-cal, rms=0.070912Jy  sigma=1.582778
! Inverting map 
! Added new window around map position (1.8, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183755 Jy
! Component: 100  -  total flux cleaned = 0.0283558 Jy
! Total flux subtracted in 100 components = 0.0283558 Jy
! Clean residual min=-0.006142 max=0.006878 Jy/beam
! Clean residual mean=0.000023 rms=0.001579 Jy/beam
! Combined flux in latest and established models = 0.138362 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 20 components and 0.138362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065001Jy  sigma=1.424122
! Fit after  self-cal, rms=0.064629Jy  sigma=1.416624
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.441 mas, bmaj=2.689 mas, bpa=-2.422 degrees
! Estimated noise=0.290029 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107541 Jy
! Component: 100  -  total flux cleaned = 0.0173581 Jy
! Component: 150  -  total flux cleaned = 0.0219041 Jy
! Component: 200  -  total flux cleaned = 0.0251165 Jy
! Total flux subtracted in 200 components = 0.0251165 Jy
! Clean residual min=-0.004055 max=0.006239 Jy/beam
! Clean residual mean=0.000037 rms=0.001106 Jy/beam
! Combined flux in latest and established models = 0.163479 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 73 components and 0.163479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062703Jy  sigma=1.363416
! Fit after  self-cal, rms=0.062598Jy  sigma=1.360685
! Inverting map 
! Added new window around map position (5.4, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00587556 Jy
! Component: 100  -  total flux cleaned = 0.00932654 Jy
! Component: 150  -  total flux cleaned = 0.012014 Jy
! Component: 200  -  total flux cleaned = 0.0142241 Jy
! Total flux subtracted in 200 components = 0.0142241 Jy
! Clean residual min=-0.002622 max=0.002884 Jy/beam
! Clean residual mean=0.000027 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.177703 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 127 components and 0.177703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061968Jy  sigma=1.343748
! Fit after  self-cal, rms=0.061917Jy  sigma=1.342459
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.441 x 2.689 at -2.422 degrees (North through East)
! Clean map  min=-0.0026465  max=0.11573 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.96     KP        0.98     
!   LA        1.00     MK        1.06     NL        1.04     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.99     HN        1.06     KP        0.96     
!   LA        0.96     NL        1.06     OV        1.05     PT        0.92     
!   SC        1.17     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        1.02     
!   LA        0.97     MK        1.02     NL        0.95     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.03     HN        1.02     KP        1.01     
!   LA        0.99     NL        1.00     OV        1.01     PT        0.94     
!   SC        1.14     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.98     KP        1.04     
!   LA        1.00     MK        0.96     NL        0.96     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.97     NL        1.03     OV        0.96     PT        0.95     
!   SC        1.16     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.95     KP        1.05     
!   LA        1.00     MK        0.99     NL        0.96     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.94     KP        1.08     
!   LA        1.01     MK        0.94     NL        0.97     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.00     NL        1.01     OV        0.97     PT        0.94     
!   SC        1.19     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.95     KP        1.02     
!   LA        1.01     MK        1.04     NL        1.05     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     HN        0.99     KP        0.98     
!   LA        0.96     NL        1.10     OV        0.99     PT        0.96     
!   SC        1.14     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.95     KP        1.06     
!   LA        1.02     MK        1.03     NL        0.95     PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        1.01     HN        0.94     KP        1.03     
!   LA        0.97     NL        0.96     OV        0.96     PT        0.99     
!   SC        1.10     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061917Jy  sigma=1.342459
! Fit after  self-cal, rms=0.062880Jy  sigma=1.331996
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.443 mas, bmaj=2.693 mas, bpa=-2.703 degrees
! Estimated noise=0.287481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178811 Jy
! Component: 100  -  total flux cleaned = 0.00303598 Jy
! Component: 150  -  total flux cleaned = 0.00398179 Jy
! Component: 200  -  total flux cleaned = 0.00455204 Jy
! Total flux subtracted in 200 components = 0.00455204 Jy
! Clean residual min=-0.001834 max=0.001781 Jy/beam
! Clean residual mean=0.000012 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.182255 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 158 components and 0.182255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062815Jy  sigma=1.330152
! Fit after  self-cal, rms=0.062880Jy  sigma=1.329845
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062880Jy  sigma=1.329845
! Fit after  self-cal, rms=0.062950Jy  sigma=1.329760
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.442 mas, bmaj=2.692 mas, bpa=-2.743 degrees
! Estimated noise=0.287327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0009722 Jy
! Component: 100  -  total flux cleaned = 0.00167917 Jy
! Component: 150  -  total flux cleaned = 0.00210906 Jy
! Component: 200  -  total flux cleaned = 0.00226644 Jy
! Total flux subtracted in 200 components = 0.00226644 Jy
! Clean residual min=-0.001763 max=0.001682 Jy/beam
! Clean residual mean=0.000011 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.184521 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 174 components and 0.184521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062929Jy  sigma=1.329155
! Fit after  self-cal, rms=0.062930Jy  sigma=1.329092
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -25.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000713329 Jy
! Component: 100  -  total flux cleaned = 0.000607689 Jy
! Component: 150  -  total flux cleaned = 0.000742802 Jy
! Component: 200  -  total flux cleaned = 0.00088852 Jy
! Total flux subtracted in 200 components = 0.00088852 Jy
! Clean residual min=-0.001454 max=0.001503 Jy/beam
! Clean residual mean=0.000011 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.18541 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 194 components and 0.18541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062885Jy  sigma=1.328095
! Fit after  self-cal, rms=0.062880Jy  sigma=1.328019
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062880Jy  sigma=1.328019
! Fit after  self-cal, rms=0.062810Jy  sigma=1.327960
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.444 mas, bmaj=2.69 mas, bpa=-2.756 degrees
! Estimated noise=0.287489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000733368 Jy
! Component: 100  -  total flux cleaned = 0.00100194 Jy
! Component: 150  -  total flux cleaned = 0.00118465 Jy
! Component: 200  -  total flux cleaned = 0.00135248 Jy
! Total flux subtracted in 200 components = 0.00135248 Jy
! Clean residual min=-0.001452 max=0.001416 Jy/beam
! Clean residual mean=0.000011 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.186762 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 209 components and 0.186762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062793Jy  sigma=1.327620
! Fit after  self-cal, rms=0.062788Jy  sigma=1.327599
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361168 Jy
! Component: 100  -  total flux cleaned = 0.000480756 Jy
! Component: 150  -  total flux cleaned = 0.000544447 Jy
! Component: 200  -  total flux cleaned = 0.000604902 Jy
! Total flux subtracted in 200 components = 0.000604902 Jy
! Clean residual min=-0.001414 max=0.001368 Jy/beam
! Clean residual mean=0.000011 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.187367 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 221 components and 0.187367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062779Jy  sigma=1.327416
! Fit after  self-cal, rms=0.062778Jy  sigma=1.327408
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062778Jy  sigma=1.327408
! Fit after  self-cal, rms=0.062727Jy  sigma=1.327378
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.289 mas, bmaj=2.932 mas, bpa=-0.3029 degrees
! Estimated noise=0.310836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029138 Jy
! Component: 100  -  total flux cleaned = 0.000515949 Jy
! Component: 150  -  total flux cleaned = 0.000750836 Jy
! Component: 200  -  total flux cleaned = 0.000924291 Jy
! Total flux subtracted in 200 components = 0.000924291 Jy
! Clean residual min=-0.001378 max=0.001462 Jy/beam
! Clean residual mean=0.000017 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.188291 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 247 components and 0.188291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062722Jy  sigma=1.327234
! Fit after  self-cal, rms=0.062722Jy  sigma=1.327223
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000190565 Jy
! Component: 100  -  total flux cleaned = 0.000311597 Jy
! Component: 150  -  total flux cleaned = 0.000403801 Jy
! Component: 200  -  total flux cleaned = 0.000471427 Jy
! Total flux subtracted in 200 components = 0.000471427 Jy
! Clean residual min=-0.001347 max=0.001444 Jy/beam
! Clean residual mean=0.000017 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.188763 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 263 components and 0.188763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062719Jy  sigma=1.327157
! Fit after  self-cal, rms=0.062719Jy  sigma=1.327151
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.443 mas, bmaj=2.688 mas, bpa=-2.761 degrees
! Estimated noise=0.287642 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.443 x 2.688 at -2.761 degrees (North through East)
! Clean map  min=-0.0013537  max=0.11444 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.185 mas, bmaj=2.614 mas, bpa=-3.481 degrees
! Estimated noise=0.507829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0848756 Jy
! Component: 100  -  total flux cleaned = 0.11343 Jy
! Component: 150  -  total flux cleaned = 0.130094 Jy
! Component: 200  -  total flux cleaned = 0.140301 Jy
! Total flux subtracted in 200 components = 0.140301 Jy
! Clean residual min=-0.004515 max=0.005409 Jy/beam
! Clean residual mean=0.000019 rms=0.001292 Jy/beam
! Combined flux in latest and established models = 0.140301 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.140301 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.443 mas, bmaj=2.688 mas, bpa=-2.761 degrees
! Estimated noise=0.287642 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100129 Jy
! Component: 100  -  total flux cleaned = 0.0170414 Jy
! Component: 150  -  total flux cleaned = 0.0223476 Jy
! Component: 200  -  total flux cleaned = 0.0264304 Jy
! Total flux subtracted in 200 components = 0.0264304 Jy
! Clean residual min=-0.002346 max=0.002890 Jy/beam
! Clean residual mean=0.000027 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.166731 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 70 components and 0.166731 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.289 mas, bmaj=2.932 mas, bpa=-0.3029 degrees
! Estimated noise=0.310836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00473759 Jy
! Component: 100  -  total flux cleaned = 0.00817419 Jy
! Component: 150  -  total flux cleaned = 0.0108112 Jy
! Component: 200  -  total flux cleaned = 0.0129354 Jy
! Total flux subtracted in 200 components = 0.0129354 Jy
! Clean residual min=-0.001928 max=0.002071 Jy/beam
! Clean residual mean=0.000028 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.179667 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147395 Jy
! Component: 100  -  total flux cleaned = 0.00265153 Jy
! Component: 150  -  total flux cleaned = 0.00360247 Jy
! Component: 200  -  total flux cleaned = 0.00445859 Jy
! Total flux subtracted in 200 components = 0.00445859 Jy
! Clean residual min=-0.001573 max=0.001764 Jy/beam
! Clean residual mean=0.000023 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.184125 Jy
! Adding 121 model components to the UV plane model.
! The established model now contains 175 components and 0.184125 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.443 mas, bmaj=2.688 mas, bpa=-2.761 degrees
! Estimated noise=0.287642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002529 Jy
! Component: 100  -  total flux cleaned = 0.000610851 Jy
! Component: 150  -  total flux cleaned = 0.000984668 Jy
! Component: 200  -  total flux cleaned = 0.00134515 Jy
! Total flux subtracted in 200 components = 0.00134515 Jy
! Clean residual min=-0.001352 max=0.001505 Jy/beam
! Clean residual mean=0.000012 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.18547 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 196 components and 0.18547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062738Jy  sigma=1.327641
! Fit after  self-cal, rms=0.062725Jy  sigma=1.327539
wmodel /scr/pima/bg219i_uvs/J2200+2137_X_map.mod
! Writing 196 model components to file: /scr/pima/bg219i_uvs/J2200+2137_X_map.mod
wobs /scr/pima/bg219i_uvs/J2200+2137_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J2200+2137_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J2200+2137_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219i_uvs/J2200+2137_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161951 Jy
! Component: 100  -  total flux cleaned = 0.000117222 Jy
! Component: 150  -  total flux cleaned = 0.000181902 Jy
! Component: 200  -  total flux cleaned = 0.000242196 Jy
! Component: 250  -  total flux cleaned = 0.000300319 Jy
! Component: 300  -  total flux cleaned = 0.000412131 Jy
! Component: 350  -  total flux cleaned = 0.000484081 Jy
! Component: 400  -  total flux cleaned = 0.000589987 Jy
! Component: 450  -  total flux cleaned = 0.000743601 Jy
! Component: 500  -  total flux cleaned = 0.000843138 Jy
! Component: 550  -  total flux cleaned = 0.000956799 Jy
! Component: 600  -  total flux cleaned = 0.00108326 Jy
! Component: 650  -  total flux cleaned = 0.00120665 Jy
! Component: 700  -  total flux cleaned = 0.00132708 Jy
! Component: 750  -  total flux cleaned = 0.0014598 Jy
! Component: 800  -  total flux cleaned = 0.00157549 Jy
! Component: 850  -  total flux cleaned = 0.00166076 Jy
! Component: 900  -  total flux cleaned = 0.00174462 Jy
! Component: 950  -  total flux cleaned = 0.00185437 Jy
! Component: 1000  -  total flux cleaned = 0.00190832 Jy
! Component: 1050  -  total flux cleaned = 0.00198806 Jy
! Component: 1100  -  total flux cleaned = 0.00207913 Jy
! Component: 1150  -  total flux cleaned = 0.00218147 Jy
! Component: 1200  -  total flux cleaned = 0.00226934 Jy
! Component: 1250  -  total flux cleaned = 0.00231884 Jy
! Component: 1300  -  total flux cleaned = 0.00237995 Jy
! Component: 1350  -  total flux cleaned = 0.00246425 Jy
! Component: 1400  -  total flux cleaned = 0.00257121 Jy
! Component: 1450  -  total flux cleaned = 0.00267659 Jy
! Component: 1500  -  total flux cleaned = 0.00273427 Jy
! Component: 1550  -  total flux cleaned = 0.00280289 Jy
! Component: 1600  -  total flux cleaned = 0.00288191 Jy
! Component: 1650  -  total flux cleaned = 0.00294883 Jy
! Component: 1700  -  total flux cleaned = 0.00302582 Jy
! Component: 1750  -  total flux cleaned = 0.00310177 Jy
! Component: 1800  -  total flux cleaned = 0.00319833 Jy
! Component: 1850  -  total flux cleaned = 0.00327266 Jy
! Component: 1900  -  total flux cleaned = 0.00335656 Jy
! Component: 1950  -  total flux cleaned = 0.00342901 Jy
! Component: 2000  -  total flux cleaned = 0.00346997 Jy
! Component: 2050  -  total flux cleaned = 0.00355099 Jy
! Component: 2100  -  total flux cleaned = 0.00358106 Jy
! Component: 2150  -  total flux cleaned = 0.00365051 Jy
! Component: 2200  -  total flux cleaned = 0.00368002 Jy
! Component: 2250  -  total flux cleaned = 0.00370925 Jy
! Component: 2300  -  total flux cleaned = 0.00374768 Jy
! Component: 2350  -  total flux cleaned = 0.00381433 Jy
! Component: 2400  -  total flux cleaned = 0.00386148 Jy
! Component: 2450  -  total flux cleaned = 0.00388953 Jy
! Component: 2500  -  total flux cleaned = 0.0039636 Jy
! Component: 2550  -  total flux cleaned = 0.00400007 Jy
! Component: 2600  -  total flux cleaned = 0.00406343 Jy
! Component: 2650  -  total flux cleaned = 0.00406332 Jy
! Component: 2700  -  total flux cleaned = 0.00409902 Jy
! Component: 2750  -  total flux cleaned = 0.0041256 Jy
! Component: 2800  -  total flux cleaned = 0.00416963 Jy
! Component: 2850  -  total flux cleaned = 0.00417847 Jy
! Component: 2900  -  total flux cleaned = 0.00425616 Jy
! Component: 2950  -  total flux cleaned = 0.00426475 Jy
! Component: 3000  -  total flux cleaned = 0.00430722 Jy
! Component: 3050  -  total flux cleaned = 0.00431564 Jy
! Component: 3100  -  total flux cleaned = 0.00435753 Jy
! Component: 3150  -  total flux cleaned = 0.00438249 Jy
! Component: 3200  -  total flux cleaned = 0.00438255 Jy
! Component: 3250  -  total flux cleaned = 0.00440715 Jy
! Component: 3300  -  total flux cleaned = 0.00443156 Jy
! Component: 3350  -  total flux cleaned = 0.00444769 Jy
! Component: 3400  -  total flux cleaned = 0.0044477 Jy
! Component: 3450  -  total flux cleaned = 0.0044796 Jy
! Component: 3500  -  total flux cleaned = 0.00450337 Jy
! Component: 3550  -  total flux cleaned = 0.00449551 Jy
! Component: 3600  -  total flux cleaned = 0.00455027 Jy
! Component: 3650  -  total flux cleaned = 0.00456571 Jy
! Component: 3700  -  total flux cleaned = 0.00458118 Jy
! Component: 3750  -  total flux cleaned = 0.00457345 Jy
! Component: 3800  -  total flux cleaned = 0.00457343 Jy
! Component: 3850  -  total flux cleaned = 0.00457337 Jy
! Component: 3900  -  total flux cleaned = 0.00457337 Jy
! Component: 3950  -  total flux cleaned = 0.00460337 Jy
! Component: 4000  -  total flux cleaned = 0.00460331 Jy
! Component: 4050  -  total flux cleaned = 0.00460332 Jy
! Total flux subtracted in 4096 components = 0.00458119 Jy
! Clean residual min=-0.000464 max=0.000500 Jy/beam
! Clean residual mean=0.000002 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.190052 Jy
keep
! Adding 243 model components to the UV plane model.
! The established model now contains 439 components and 0.190052 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J2200+2137_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.443 x 2.688 at -2.761 degrees (North through East)
! Clean map  min=-0.00097925  max=0.11437 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2200+2137_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.114369 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000122002 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.320022 0.320022 0.640044 1.28009 2.56018 5.12035 10.2407 20.4814 40.9628 81.9256
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.114 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  937.435 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2200+2137_X_uvs.log closed on Wed Apr  6 23:57:27 2016