! Started logfile: /scr/pima/bg219i_uvs/J2200+1030_X_dfm.log on Thu May 19 23:38:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2200+1030_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2200+1030_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.821858 visibilities/baseline/integration-bin.
! Found source: J2200+1030
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 27072 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2200+1030_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018517Jy  sigma=23.429568
! Fit after  self-cal, rms=0.794552Jy  sigma=18.249923
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7652 mas, bmaj=1.574 mas, bpa=-1.753 degrees
! Estimated noise=0.395573 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.161063 Jy
! Component: 100  -  total flux cleaned = 0.196263 Jy
! Total flux subtracted in 100 components = 0.196263 Jy
! Clean residual min=-0.003622 max=0.010475 Jy/beam
! Clean residual mean=-0.000002 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.196263 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.196263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067466Jy  sigma=1.416390
! Fit after  self-cal, rms=0.067465Jy  sigma=1.416219
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101342 Jy
! Component: 100  -  total flux cleaned = 0.01398 Jy
! Total flux subtracted in 100 components = 0.01398 Jy
! Clean residual min=-0.002445 max=0.002514 Jy/beam
! Clean residual mean=0.000001 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.210243 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.210243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066050Jy  sigma=1.377192
! Fit after  self-cal, rms=0.066044Jy  sigma=1.376954
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=1.929 mas, bpa=1.077 degrees
! Estimated noise=0.202062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027602 Jy
! Component: 100  -  total flux cleaned = 0.0042782 Jy
! Component: 150  -  total flux cleaned = 0.0053258 Jy
! Component: 200  -  total flux cleaned = 0.00558335 Jy
! Total flux subtracted in 200 components = 0.00558335 Jy
! Clean residual min=-0.001664 max=0.002040 Jy/beam
! Clean residual mean=0.000002 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.215826 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 31 components and 0.215826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065921Jy  sigma=1.373927
! Fit after  self-cal, rms=0.065920Jy  sigma=1.373802
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.042 x 1.929 at 1.077 degrees (North through East)
! Clean map  min=-0.001442  max=0.20725 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.04     KP        1.01     
!   LA        1.01     MK        1.03     NL        1.00     OV        0.99     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.04     KP        1.00     
!   LA        1.02     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        1.02     
!   LA        0.99     MK        1.02     NL        1.02     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.00     MK        0.98     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        1.01     
!   LA        0.99     MK        0.98     NL        1.00     OV        0.99     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.01     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.02     KP        1.00     
!   LA        0.99     MK        0.98     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.01     
!   LA        0.99     MK        0.97     NL        0.98     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.04     KP        1.01     
!   LA        0.99     MK        0.98     NL        0.99     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.04     KP        0.99     
!   LA        1.00     MK        0.99     NL        0.99     OV        0.98     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.03     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        0.98     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.065920Jy  sigma=1.373802
! Fit after  self-cal, rms=0.066087Jy  sigma=1.370014
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=1.931 mas, bpa=1.264 degrees
! Estimated noise=0.201797 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000639749 Jy
! Component: 100  -  total flux cleaned = -0.000831713 Jy
! Component: 150  -  total flux cleaned = -0.000947566 Jy
! Component: 200  -  total flux cleaned = -0.00104568 Jy
! Total flux subtracted in 200 components = -0.00104568 Jy
! Clean residual min=-0.001271 max=0.001338 Jy/beam
! Clean residual mean=0.000002 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.21478 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 43 components and 0.21478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066061Jy  sigma=1.369617
! Fit after  self-cal, rms=0.066072Jy  sigma=1.369581
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066072Jy  sigma=1.369581
! Fit after  self-cal, rms=0.066363Jy  sigma=1.367032
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=1.934 mas, bpa=1.34 degrees
! Estimated noise=0.201674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000476883 Jy
! Component: 100  -  total flux cleaned = -0.000561803 Jy
! Component: 150  -  total flux cleaned = -0.00061376 Jy
! Component: 200  -  total flux cleaned = -0.000628639 Jy
! Total flux subtracted in 200 components = -0.000628639 Jy
! Clean residual min=-0.001250 max=0.001287 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.214152 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 55 components and 0.214152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066349Jy  sigma=1.366810
! Fit after  self-cal, rms=0.066355Jy  sigma=1.366781
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (19.6, 48.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011076 Jy
! Component: 100  -  total flux cleaned = 0.00163421 Jy
! Component: 150  -  total flux cleaned = 0.00179744 Jy
! Component: 200  -  total flux cleaned = 0.00182991 Jy
! Total flux subtracted in 200 components = 0.00182991 Jy
! Clean residual min=-0.001173 max=0.001206 Jy/beam
! Clean residual mean=0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.215982 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 74 components and 0.215982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066329Jy  sigma=1.366353
! Fit after  self-cal, rms=0.066329Jy  sigma=1.366336
! Inverting map 
! Added new window around map position (29.4, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000772878 Jy
! Component: 100  -  total flux cleaned = 0.00077079 Jy
! Component: 150  -  total flux cleaned = 0.000867929 Jy
! Component: 200  -  total flux cleaned = 0.000903288 Jy
! Total flux subtracted in 200 components = 0.000903288 Jy
! Clean residual min=-0.001180 max=0.001199 Jy/beam
! Clean residual mean=0.000000 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.216885 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.216885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066306Jy  sigma=1.365900
! Fit after  self-cal, rms=0.066304Jy  sigma=1.365876
! Inverting map 
! Added new window around map position (-16.8, -17.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000970307 Jy
! Component: 100  -  total flux cleaned = 0.00111027 Jy
! Component: 150  -  total flux cleaned = 0.00116871 Jy
! Component: 200  -  total flux cleaned = 0.00124314 Jy
! Total flux subtracted in 200 components = 0.00124314 Jy
! Clean residual min=-0.001062 max=0.001036 Jy/beam
! Clean residual mean=-0.000000 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.218128 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 107 components and 0.218128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066281Jy  sigma=1.365395
! Fit after  self-cal, rms=0.066279Jy  sigma=1.365362
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066279Jy  sigma=1.365362
! Fit after  self-cal, rms=0.066312Jy  sigma=1.365273
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=1.935 mas, bpa=1.371 degrees
! Estimated noise=0.201556 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000232253 Jy
! Component: 100  -  total flux cleaned = 0.000324328 Jy
! Component: 150  -  total flux cleaned = 0.000357921 Jy
! Component: 200  -  total flux cleaned = 0.000341872 Jy
! Total flux subtracted in 200 components = 0.000341872 Jy
! Clean residual min=-0.001009 max=0.001027 Jy/beam
! Clean residual mean=-0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.21847 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 119 components and 0.21847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066302Jy  sigma=1.365084
! Fit after  self-cal, rms=0.066302Jy  sigma=1.365078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.7894e-05 Jy
! Component: 100  -  total flux cleaned = 8.32043e-05 Jy
! Component: 150  -  total flux cleaned = 8.3317e-05 Jy
! Component: 200  -  total flux cleaned = 8.34994e-05 Jy
! Total flux subtracted in 200 components = 8.34994e-05 Jy
! Clean residual min=-0.000999 max=0.001026 Jy/beam
! Clean residual mean=-0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.218553 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 127 components and 0.218553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066295Jy  sigma=1.364959
! Fit after  self-cal, rms=0.066294Jy  sigma=1.364958
! Inverting map 
! Added new window around map position (-29, 42.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000608046 Jy
! Component: 100  -  total flux cleaned = 0.000762363 Jy
! Component: 150  -  total flux cleaned = 0.000780155 Jy
! Component: 200  -  total flux cleaned = 0.000825862 Jy
! Total flux subtracted in 200 components = 0.000825862 Jy
! Clean residual min=-0.000934 max=0.000943 Jy/beam
! Clean residual mean=-0.000000 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.219379 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 139 components and 0.219379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066278Jy  sigma=1.364589
! Fit after  self-cal, rms=0.066276Jy  sigma=1.364576
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066276Jy  sigma=1.364576
! Fit after  self-cal, rms=0.066300Jy  sigma=1.364545
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.245 mas, bmaj=3.069 mas, bpa=0.9024 degrees
! Estimated noise=0.239567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000347353 Jy
! Component: 100  -  total flux cleaned = 0.00052096 Jy
! Component: 150  -  total flux cleaned = 0.000589252 Jy
! Component: 200  -  total flux cleaned = 0.000599598 Jy
! Total flux subtracted in 200 components = 0.000599598 Jy
! Clean residual min=-0.000782 max=0.000907 Jy/beam
! Clean residual mean=0.000000 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.219979 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 158 components and 0.219979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066296Jy  sigma=1.364495
! Fit after  self-cal, rms=0.066297Jy  sigma=1.364491
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140295 Jy
! Component: 100  -  total flux cleaned = 0.000168701 Jy
! Component: 150  -  total flux cleaned = 0.000178024 Jy
! Component: 200  -  total flux cleaned = 0.000194709 Jy
! Total flux subtracted in 200 components = 0.000194709 Jy
! Clean residual min=-0.000764 max=0.000884 Jy/beam
! Clean residual mean=-0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.220174 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 170 components and 0.220174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066295Jy  sigma=1.364463
! Fit after  self-cal, rms=0.066294Jy  sigma=1.364462
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=1.935 mas, bpa=1.377 degrees
! Estimated noise=0.201483 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.043 x 1.935 at 1.377 degrees (North through East)
! Clean map  min=-0.0010361  max=0.20718 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.766 mas, bmaj=1.576 mas, bpa=-1.393 degrees
! Estimated noise=0.39497 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.160782 Jy
! Component: 100  -  total flux cleaned = 0.195894 Jy
! Component: 150  -  total flux cleaned = 0.205712 Jy
! Component: 200  -  total flux cleaned = 0.209543 Jy
! Total flux subtracted in 200 components = 0.209543 Jy
! Clean residual min=-0.002257 max=0.002332 Jy/beam
! Clean residual mean=-0.000000 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.209543 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.209543 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=1.935 mas, bpa=1.377 degrees
! Estimated noise=0.201483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243943 Jy
! Component: 100  -  total flux cleaned = 0.00406733 Jy
! Component: 150  -  total flux cleaned = 0.00515424 Jy
! Component: 200  -  total flux cleaned = 0.00600471 Jy
! Total flux subtracted in 200 components = 0.00600471 Jy
! Clean residual min=-0.001213 max=0.001089 Jy/beam
! Clean residual mean=-0.000000 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.215547 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 34 components and 0.215547 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.245 mas, bmaj=3.069 mas, bpa=0.9024 degrees
! Estimated noise=0.239567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135101 Jy
! Component: 100  -  total flux cleaned = 0.00228157 Jy
! Component: 150  -  total flux cleaned = 0.00285013 Jy
! Component: 200  -  total flux cleaned = 0.00311178 Jy
! Total flux subtracted in 200 components = 0.00311178 Jy
! Clean residual min=-0.001029 max=0.000942 Jy/beam
! Clean residual mean=0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.218659 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024036 Jy
! Component: 100  -  total flux cleaned = 0.000483784 Jy
! Component: 150  -  total flux cleaned = 0.000706992 Jy
! Component: 200  -  total flux cleaned = 0.0008767 Jy
! Total flux subtracted in 200 components = 0.0008767 Jy
! Clean residual min=-0.000932 max=0.000918 Jy/beam
! Clean residual mean=0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.219536 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 82 components and 0.219536 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=1.935 mas, bpa=1.377 degrees
! Estimated noise=0.201483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000246439 Jy
! Component: 100  -  total flux cleaned = 0.000308022 Jy
! Component: 150  -  total flux cleaned = 0.000392223 Jy
! Component: 200  -  total flux cleaned = 0.000418344 Jy
! Total flux subtracted in 200 components = 0.000418344 Jy
! Clean residual min=-0.000976 max=0.000957 Jy/beam
! Clean residual mean=-0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.219954 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 99 components and 0.219954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066343Jy  sigma=1.365401
! Fit after  self-cal, rms=0.066340Jy  sigma=1.365370
wmodel /J2200+1030_X_map.mod
! wmodel: Unable to open new model file: /J2200+1030_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2200+1030_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.043 x 1.935 at 1.377 degrees (North through East)
! Clean map  min=-0.00091454  max=0.2075 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2200+1030_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.207496 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000247107 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.35727 0.35727 0.71454 1.42908 2.85816 5.71632 11.4326 22.8653 45.7306 91.4612
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.207 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  839.7 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2200+1030_X_dfm.log closed on Thu May 19 23:38:50 2016