! Started logfile: /scr/pima/bg219i_uvs/J2200+1030_S_uvs.log on Wed Apr  6 23:16:44 2016
obs /scr/pima/bg219i_uvs/J2200+1030_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2200+1030_S_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.898361 visibilities/baseline/integration-bin.
! Found source: J2200+1030
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 9864 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J2200+1030_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010107Jy  sigma=23.695139
! Fit after  self-cal, rms=0.883162Jy  sigma=20.711744
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=6.294 mas, bpa=-4.274 degrees
! Estimated noise=0.476316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0916657 Jy
! Component: 100  -  total flux cleaned = 0.112091 Jy
! Total flux subtracted in 100 components = 0.112091 Jy
! Clean residual min=-0.003501 max=0.007748 Jy/beam
! Clean residual mean=0.000004 rms=0.001060 Jy/beam
! Combined flux in latest and established models = 0.112091 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.112091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059751Jy  sigma=1.352927
! Fit after  self-cal, rms=0.059731Jy  sigma=1.352621
! Inverting map 
! Added new window around map position (4.5, 7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00814752 Jy
! Component: 100  -  total flux cleaned = 0.0128917 Jy
! Total flux subtracted in 100 components = 0.0128917 Jy
! Clean residual min=-0.002909 max=0.003236 Jy/beam
! Clean residual mean=0.000001 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.124983 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 27 components and 0.124983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058583Jy  sigma=1.324422
! Fit after  self-cal, rms=0.058539Jy  sigma=1.323642
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.695 mas, bmaj=7.211 mas, bpa=-3.472 degrees
! Estimated noise=0.321606 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036451 Jy
! Component: 100  -  total flux cleaned = 0.00584088 Jy
! Component: 150  -  total flux cleaned = 0.00725097 Jy
! Component: 200  -  total flux cleaned = 0.00815553 Jy
! Total flux subtracted in 200 components = 0.00815553 Jy
! Clean residual min=-0.001860 max=0.001998 Jy/beam
! Clean residual mean=-0.000002 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.133139 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 48 components and 0.133139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058301Jy  sigma=1.317687
! Fit after  self-cal, rms=0.058291Jy  sigma=1.317446
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.695 x 7.211 at -3.472 degrees (North through East)
! Clean map  min=-0.001817  max=0.11674 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.06     KP        1.01     
!   LA        1.01     MK        1.00     NL        1.03     OV        0.98     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.04     KP        1.01     
!   LA        1.01     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.06     KP        0.97     
!   LA        1.00     MK        1.02     NL        0.99     OV        1.01     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.04     KP        1.00     
!   LA        0.99     MK        0.98     NL        0.99     OV        1.01     
!   PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.058291Jy  sigma=1.317446
! Fit after  self-cal, rms=0.058382Jy  sigma=1.314142
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.713 mas, bmaj=7.239 mas, bpa=-3.44 degrees
! Estimated noise=0.321628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000460692 Jy
! Component: 100  -  total flux cleaned = -0.000558114 Jy
! Component: 150  -  total flux cleaned = -0.000658581 Jy
! Component: 200  -  total flux cleaned = -0.000709548 Jy
! Total flux subtracted in 200 components = -0.000709548 Jy
! Clean residual min=-0.001704 max=0.001798 Jy/beam
! Clean residual mean=-0.000003 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.132429 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 58 components and 0.132429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058365Jy  sigma=1.313682
! Fit after  self-cal, rms=0.058375Jy  sigma=1.313599
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058375Jy  sigma=1.313599
! Fit after  self-cal, rms=0.058130Jy  sigma=1.311023
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.711 mas, bmaj=7.261 mas, bpa=-3.414 degrees
! Estimated noise=0.321041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000460632 Jy
! Component: 100  -  total flux cleaned = -0.000693478 Jy
! Component: 150  -  total flux cleaned = -0.00077554 Jy
! Component: 200  -  total flux cleaned = -0.000790531 Jy
! Total flux subtracted in 200 components = -0.000790531 Jy
! Clean residual min=-0.001513 max=0.001740 Jy/beam
! Clean residual mean=-0.000003 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.131639 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 67 components and 0.131639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058117Jy  sigma=1.310676
! Fit after  self-cal, rms=0.058116Jy  sigma=1.310624
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17, 22).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109423 Jy
! Component: 100  -  total flux cleaned = 0.00145761 Jy
! Component: 150  -  total flux cleaned = 0.00162962 Jy
! Component: 200  -  total flux cleaned = 0.0018265 Jy
! Total flux subtracted in 200 components = 0.0018265 Jy
! Clean residual min=-0.001347 max=0.001422 Jy/beam
! Clean residual mean=-0.000003 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.133465 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.133465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058070Jy  sigma=1.309424
! Fit after  self-cal, rms=0.058066Jy  sigma=1.309388
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058066Jy  sigma=1.309388
! Fit after  self-cal, rms=0.057949Jy  sigma=1.309287
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.71 mas, bmaj=7.265 mas, bpa=-3.418 degrees
! Estimated noise=0.320156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012704 Jy
! Component: 100  -  total flux cleaned = 0.000194989 Jy
! Component: 150  -  total flux cleaned = 0.000215595 Jy
! Component: 200  -  total flux cleaned = 0.000182499 Jy
! Total flux subtracted in 200 components = 0.000182499 Jy
! Clean residual min=-0.001260 max=0.001429 Jy/beam
! Clean residual mean=-0.000004 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.133648 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 95 components and 0.133647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057936Jy  sigma=1.308969
! Fit after  self-cal, rms=0.057937Jy  sigma=1.308959
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.41877e-05 Jy
! Component: 100  -  total flux cleaned = 3.92226e-05 Jy
! Component: 150  -  total flux cleaned = -1.70167e-05 Jy
! Component: 200  -  total flux cleaned = -4.29684e-05 Jy
! Total flux subtracted in 200 components = -4.29684e-05 Jy
! Clean residual min=-0.001242 max=0.001411 Jy/beam
! Clean residual mean=-0.000004 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.133605 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 102 components and 0.133605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057930Jy  sigma=1.308817
! Fit after  self-cal, rms=0.057930Jy  sigma=1.308809
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057930Jy  sigma=1.308809
! Fit after  self-cal, rms=0.057880Jy  sigma=1.308780
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.826 mas, bmaj=10.92 mas, bpa=0.202 degrees
! Estimated noise=0.38989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124333 Jy
! Component: 100  -  total flux cleaned = 5.33043e-05 Jy
! Component: 150  -  total flux cleaned = 2.249e-05 Jy
! Component: 200  -  total flux cleaned = -1.64e-05 Jy
! Total flux subtracted in 200 components = -1.64e-05 Jy
! Clean residual min=-0.001502 max=0.001389 Jy/beam
! Clean residual mean=-0.000006 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.133588 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 111 components and 0.133588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057877Jy  sigma=1.308744
! Fit after  self-cal, rms=0.057876Jy  sigma=1.308710
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.72573e-05 Jy
! Component: 100  -  total flux cleaned = 0.000101068 Jy
! Component: 150  -  total flux cleaned = 8.07209e-05 Jy
! Component: 200  -  total flux cleaned = 7.15595e-05 Jy
! Total flux subtracted in 200 components = 7.15595e-05 Jy
! Clean residual min=-0.001452 max=0.001367 Jy/beam
! Clean residual mean=-0.000006 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.13366 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 120 components and 0.13366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057876Jy  sigma=1.308734
! Fit after  self-cal, rms=0.057876Jy  sigma=1.308717
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.711 mas, bmaj=7.267 mas, bpa=-3.395 degrees
! Estimated noise=0.319796 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.711 x 7.267 at -3.395 degrees (North through East)
! Clean map  min=-0.0011956  max=0.11661 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.991 mas, bmaj=6.344 mas, bpa=-4.242 degrees
! Estimated noise=0.475709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0914578 Jy
! Component: 100  -  total flux cleaned = 0.11196 Jy
! Component: 150  -  total flux cleaned = 0.120132 Jy
! Component: 200  -  total flux cleaned = 0.124962 Jy
! Total flux subtracted in 200 components = 0.124962 Jy
! Clean residual min=-0.002643 max=0.002796 Jy/beam
! Clean residual mean=-0.000000 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 0.124962 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.124962 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.711 mas, bmaj=7.267 mas, bpa=-3.395 degrees
! Estimated noise=0.319796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287155 Jy
! Component: 100  -  total flux cleaned = 0.00444416 Jy
! Component: 150  -  total flux cleaned = 0.00550514 Jy
! Component: 200  -  total flux cleaned = 0.00636534 Jy
! Total flux subtracted in 200 components = 0.00636534 Jy
! Clean residual min=-0.001662 max=0.001462 Jy/beam
! Clean residual mean=-0.000003 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.131327 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 49 components and 0.131327 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.826 mas, bmaj=10.92 mas, bpa=0.202 degrees
! Estimated noise=0.38989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126715 Jy
! Component: 100  -  total flux cleaned = 0.00191909 Jy
! Component: 150  -  total flux cleaned = 0.00221715 Jy
! Component: 200  -  total flux cleaned = 0.00247892 Jy
! Total flux subtracted in 200 components = 0.00247892 Jy
! Clean residual min=-0.001502 max=0.001323 Jy/beam
! Clean residual mean=-0.000005 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.133806 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000166621 Jy
! Component: 100  -  total flux cleaned = 0.000196112 Jy
! Component: 150  -  total flux cleaned = 0.000195972 Jy
! Component: 200  -  total flux cleaned = 0.000195996 Jy
! Total flux subtracted in 200 components = 0.000195996 Jy
! Clean residual min=-0.001473 max=0.001333 Jy/beam
! Clean residual mean=-0.000005 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.134002 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 79 components and 0.134002 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.711 mas, bmaj=7.267 mas, bpa=-3.395 degrees
! Estimated noise=0.319796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00018439 Jy
! Component: 100  -  total flux cleaned = -0.000209959 Jy
! Component: 150  -  total flux cleaned = -0.000163373 Jy
! Component: 200  -  total flux cleaned = -0.000164159 Jy
! Total flux subtracted in 200 components = -0.000164159 Jy
! Clean residual min=-0.001379 max=0.001434 Jy/beam
! Clean residual mean=-0.000004 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.133838 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 104 components and 0.133838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057904Jy  sigma=1.309402
! Fit after  self-cal, rms=0.057903Jy  sigma=1.309345
wmodel /scr/pima/bg219i_uvs/J2200+1030_S_map.mod
! Writing 104 model components to file: /scr/pima/bg219i_uvs/J2200+1030_S_map.mod
wobs /scr/pima/bg219i_uvs/J2200+1030_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J2200+1030_S_uvs.fits
wwins /scr/pima/bg219i_uvs/J2200+1030_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219i_uvs/J2200+1030_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291175 Jy
! Component: 100  -  total flux cleaned = 0.000364717 Jy
! Component: 150  -  total flux cleaned = 0.000434653 Jy
! Component: 200  -  total flux cleaned = 0.000391436 Jy
! Component: 250  -  total flux cleaned = 0.000391616 Jy
! Component: 300  -  total flux cleaned = 0.000350245 Jy
! Component: 350  -  total flux cleaned = 0.000309889 Jy
! Component: 400  -  total flux cleaned = 0.000329472 Jy
! Component: 450  -  total flux cleaned = 0.000367149 Jy
! Component: 500  -  total flux cleaned = 0.000329664 Jy
! Component: 550  -  total flux cleaned = 0.000366478 Jy
! Component: 600  -  total flux cleaned = 0.000438278 Jy
! Component: 650  -  total flux cleaned = 0.000473077 Jy
! Component: 700  -  total flux cleaned = 0.000473043 Jy
! Component: 750  -  total flux cleaned = 0.000524533 Jy
! Component: 800  -  total flux cleaned = 0.000591899 Jy
! Component: 850  -  total flux cleaned = 0.000690865 Jy
! Component: 900  -  total flux cleaned = 0.000706757 Jy
! Component: 950  -  total flux cleaned = 0.000787284 Jy
! Component: 1000  -  total flux cleaned = 0.000834628 Jy
! Component: 1050  -  total flux cleaned = 0.000912675 Jy
! Component: 1100  -  total flux cleaned = 0.00102005 Jy
! Component: 1150  -  total flux cleaned = 0.00108071 Jy
! Component: 1200  -  total flux cleaned = 0.00114032 Jy
! Component: 1250  -  total flux cleaned = 0.00118459 Jy
! Component: 1300  -  total flux cleaned = 0.00124265 Jy
! Component: 1350  -  total flux cleaned = 0.00122823 Jy
! Component: 1400  -  total flux cleaned = 0.00131362 Jy
! Component: 1450  -  total flux cleaned = 0.00136995 Jy
! Component: 1500  -  total flux cleaned = 0.00143936 Jy
! Component: 1550  -  total flux cleaned = 0.00138447 Jy
! Component: 1600  -  total flux cleaned = 0.00146594 Jy
! Component: 1650  -  total flux cleaned = 0.0014255 Jy
! Component: 1700  -  total flux cleaned = 0.0015052 Jy
! Component: 1750  -  total flux cleaned = 0.00146581 Jy
! Component: 1800  -  total flux cleaned = 0.00154397 Jy
! Component: 1850  -  total flux cleaned = 0.00162094 Jy
! Component: 1900  -  total flux cleaned = 0.00162065 Jy
! Component: 1950  -  total flux cleaned = 0.00162053 Jy
! Component: 2000  -  total flux cleaned = 0.00169541 Jy
! Component: 2050  -  total flux cleaned = 0.00174462 Jy
! Component: 2100  -  total flux cleaned = 0.0017812 Jy
! Component: 2150  -  total flux cleaned = 0.00182956 Jy
! Component: 2200  -  total flux cleaned = 0.00185369 Jy
! Component: 2250  -  total flux cleaned = 0.00188954 Jy
! Component: 2300  -  total flux cleaned = 0.0019488 Jy
! Component: 2350  -  total flux cleaned = 0.00201908 Jy
! Component: 2400  -  total flux cleaned = 0.00205372 Jy
! Component: 2450  -  total flux cleaned = 0.00207694 Jy
! Component: 2500  -  total flux cleaned = 0.00215691 Jy
! Component: 2550  -  total flux cleaned = 0.00219094 Jy
! Component: 2600  -  total flux cleaned = 0.00222466 Jy
! Component: 2650  -  total flux cleaned = 0.00225822 Jy
! Component: 2700  -  total flux cleaned = 0.00225832 Jy
! Component: 2750  -  total flux cleaned = 0.00232408 Jy
! Component: 2800  -  total flux cleaned = 0.00236771 Jy
! Component: 2850  -  total flux cleaned = 0.00237847 Jy
! Component: 2900  -  total flux cleaned = 0.00242134 Jy
! Component: 2950  -  total flux cleaned = 0.00241081 Jy
! Component: 3000  -  total flux cleaned = 0.00248447 Jy
! Component: 3050  -  total flux cleaned = 0.00251567 Jy
! Component: 3100  -  total flux cleaned = 0.00253644 Jy
! Component: 3150  -  total flux cleaned = 0.00256739 Jy
! Component: 3200  -  total flux cleaned = 0.00257773 Jy
! Component: 3250  -  total flux cleaned = 0.00265879 Jy
! Component: 3300  -  total flux cleaned = 0.00267896 Jy
! Component: 3350  -  total flux cleaned = 0.00269896 Jy
! Component: 3400  -  total flux cleaned = 0.00273868 Jy
! Component: 3450  -  total flux cleaned = 0.00283721 Jy
! Component: 3500  -  total flux cleaned = 0.00282735 Jy
! Component: 3550  -  total flux cleaned = 0.00284676 Jy
! Component: 3600  -  total flux cleaned = 0.00291438 Jy
! Component: 3650  -  total flux cleaned = 0.00297195 Jy
! Component: 3700  -  total flux cleaned = 0.00301963 Jy
! Component: 3750  -  total flux cleaned = 0.00307651 Jy
! Component: 3800  -  total flux cleaned = 0.0030859 Jy
! Component: 3850  -  total flux cleaned = 0.00317022 Jy
! Component: 3900  -  total flux cleaned = 0.00318888 Jy
! Component: 3950  -  total flux cleaned = 0.00325355 Jy
! Component: 4000  -  total flux cleaned = 0.00329031 Jy
! Component: 4050  -  total flux cleaned = 0.00333602 Jy
! Total flux subtracted in 4096 components = 0.00339063 Jy
! Clean residual min=-0.000497 max=0.000567 Jy/beam
! Clean residual mean=-0.000002 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.137229 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 395 components and 0.137229 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J2200+1030_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.711 x 7.267 at -3.395 degrees (North through East)
! Clean map  min=-0.0012807  max=0.11638 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2200+1030_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.116381 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00016668 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.429657 0.429657 0.859314 1.71863 3.43726 6.87451 13.749 27.4981 54.9961
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.116 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  698.231 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2200+1030_S_uvs.log closed on Wed Apr  6 23:16:50 2016