! Started logfile: /scr/pima/bg219i_uvs/J2157+1014_X_dfm.log on Thu May 19 23:38:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2157+1014_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2157+1014_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.816049 visibilities/baseline/integration-bin.
! Found source: J2157+1014
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15864 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2157+1014_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019711Jy  sigma=23.654043
! Fit after  self-cal, rms=0.831676Jy  sigma=19.208822
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7965 mas, bmaj=1.642 mas, bpa=-1.704 degrees
! Estimated noise=0.438049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123301 Jy
! Component: 100  -  total flux cleaned = 0.164295 Jy
! Total flux subtracted in 100 components = 0.164295 Jy
! Clean residual min=-0.010658 max=0.030229 Jy/beam
! Clean residual mean=-0.000031 rms=0.002757 Jy/beam
! Combined flux in latest and established models = 0.164295 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.164295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083691Jy  sigma=1.863080
! Fit after  self-cal, rms=0.083611Jy  sigma=1.859981
! Inverting map 
! Added new window around map position (2, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0276933 Jy
! Component: 100  -  total flux cleaned = 0.0434212 Jy
! Total flux subtracted in 100 components = 0.0434212 Jy
! Clean residual min=-0.009089 max=0.009533 Jy/beam
! Clean residual mean=-0.000017 rms=0.001638 Jy/beam
! Combined flux in latest and established models = 0.207717 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.207717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071186Jy  sigma=1.540963
! Fit after  self-cal, rms=0.070490Jy  sigma=1.524152
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120939 Jy
! Component: 100  -  total flux cleaned = 0.0200519 Jy
! Total flux subtracted in 100 components = 0.0200519 Jy
! Clean residual min=-0.006853 max=0.006934 Jy/beam
! Clean residual mean=-0.000010 rms=0.001183 Jy/beam
! Combined flux in latest and established models = 0.227769 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.227769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067394Jy  sigma=1.442568
! Fit after  self-cal, rms=0.067246Jy  sigma=1.438639
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=1.906 mas, bpa=1.092 degrees
! Estimated noise=0.265303 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00941761 Jy
! Component: 100  -  total flux cleaned = 0.0145165 Jy
! Component: 150  -  total flux cleaned = 0.0175994 Jy
! Component: 200  -  total flux cleaned = 0.0196971 Jy
! Total flux subtracted in 200 components = 0.0196971 Jy
! Clean residual min=-0.003379 max=0.005977 Jy/beam
! Clean residual mean=-0.000010 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.247466 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 45 components and 0.247466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066006Jy  sigma=1.404210
! Fit after  self-cal, rms=0.065929Jy  sigma=1.401852
! Inverting map 
! Added new window around map position (12, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00500604 Jy
! Component: 100  -  total flux cleaned = 0.00770999 Jy
! Component: 150  -  total flux cleaned = 0.00952207 Jy
! Component: 200  -  total flux cleaned = 0.0105784 Jy
! Total flux subtracted in 200 components = 0.0105784 Jy
! Clean residual min=-0.002993 max=0.002328 Jy/beam
! Clean residual mean=-0.000005 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.258044 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 64 components and 0.258044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065517Jy  sigma=1.390958
! Fit after  self-cal, rms=0.065476Jy  sigma=1.390047
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.009 x 1.906 at 1.092 degrees (North through East)
! Clean map  min=-0.0026283  max=0.16073 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.08     KP        0.98     
!   LA        0.99     MK        0.97     NL        0.99     OV        1.00     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.04     KP        0.98     
!   LA        1.02     MK        1.03     NL        0.99     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.05     KP        1.01     
!   LA        0.98     MK        1.08     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.04     KP        1.00     
!   LA        0.98     MK        0.95     NL        1.02     OV        0.97     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.02     KP        1.01     
!   LA        1.00     MK        0.91     NL        0.98     OV        0.98     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.07     KP        1.02     
!   LA        1.00     MK        0.97     NL        1.01     OV        0.98     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.00     KP        0.99     
!   LA        1.00     MK        0.93     NL        1.00     OV        0.98     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        0.97     KP        1.02     
!   LA        0.96     MK        1.03     NL        0.99     OV        0.95     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.10     KP        1.00     
!   LA        1.02     MK        0.87     NL        0.98     OV        0.99     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.02     KP        0.98     
!   LA        0.97     MK        0.87     NL        1.02     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.04     KP        0.99     
!   LA        0.99     MK        0.95     NL        1.00     OV        0.98     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.07     KP        0.99     
!   LA        0.99     MK        1.04     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.065476Jy  sigma=1.390047
! Fit after  self-cal, rms=0.065747Jy  sigma=1.383531
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.899 mas, bpa=0.9744 degrees
! Estimated noise=0.263876 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754073 Jy
! Component: 100  -  total flux cleaned = 0.00117707 Jy
! Component: 150  -  total flux cleaned = 0.00160661 Jy
! Component: 200  -  total flux cleaned = 0.00203389 Jy
! Total flux subtracted in 200 components = 0.00203389 Jy
! Clean residual min=-0.002453 max=0.002088 Jy/beam
! Clean residual mean=-0.000002 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.260078 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 84 components and 0.260078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065648Jy  sigma=1.381275
! Fit after  self-cal, rms=0.065663Jy  sigma=1.381115
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065663Jy  sigma=1.381115
! Fit after  self-cal, rms=0.066037Jy  sigma=1.376867
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.897 mas, bpa=1.125 degrees
! Estimated noise=0.263875 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00045112 Jy
! Component: 100  -  total flux cleaned = 0.000694286 Jy
! Component: 150  -  total flux cleaned = 0.000874234 Jy
! Component: 200  -  total flux cleaned = 0.00103976 Jy
! Total flux subtracted in 200 components = 0.00103976 Jy
! Clean residual min=-0.002118 max=0.001823 Jy/beam
! Clean residual mean=-0.000003 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.261118 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 102 components and 0.261118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065996Jy  sigma=1.375873
! Fit after  self-cal, rms=0.066000Jy  sigma=1.375797
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279401 Jy
! Component: 100  -  total flux cleaned = 0.000462921 Jy
! Component: 150  -  total flux cleaned = 0.000631478 Jy
! Component: 200  -  total flux cleaned = 0.000788362 Jy
! Total flux subtracted in 200 components = 0.000788362 Jy
! Clean residual min=-0.002064 max=0.001781 Jy/beam
! Clean residual mean=-0.000002 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.261906 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.261906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065976Jy  sigma=1.375236
! Fit after  self-cal, rms=0.065972Jy  sigma=1.375197
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065972Jy  sigma=1.375197
! Fit after  self-cal, rms=0.066012Jy  sigma=1.375140
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.897 mas, bpa=1.102 degrees
! Estimated noise=0.263632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.36509e-05 Jy
! Component: 100  -  total flux cleaned = 6.6949e-05 Jy
! Component: 150  -  total flux cleaned = 0.000213759 Jy
! Component: 200  -  total flux cleaned = 0.000304844 Jy
! Total flux subtracted in 200 components = 0.000304844 Jy
! Clean residual min=-0.001965 max=0.001735 Jy/beam
! Clean residual mean=-0.000002 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.262211 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 116 components and 0.262211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065994Jy  sigma=1.374700
! Fit after  self-cal, rms=0.065992Jy  sigma=1.374662
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.81935e-05 Jy
! Component: 100  -  total flux cleaned = 0.000216276 Jy
! Component: 150  -  total flux cleaned = 0.000358245 Jy
! Component: 200  -  total flux cleaned = 0.000434491 Jy
! Total flux subtracted in 200 components = 0.000434491 Jy
! Clean residual min=-0.001924 max=0.001725 Jy/beam
! Clean residual mean=-0.000002 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.262645 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 123 components and 0.262645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065979Jy  sigma=1.374357
! Fit after  self-cal, rms=0.065976Jy  sigma=1.374323
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065976Jy  sigma=1.374323
! Fit after  self-cal, rms=0.066011Jy  sigma=1.374298
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.282 mas, bmaj=2.978 mas, bpa=4.269 degrees
! Estimated noise=0.320796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122247 Jy
! Component: 100  -  total flux cleaned = 0.000223667 Jy
! Component: 150  -  total flux cleaned = 0.000308371 Jy
! Component: 200  -  total flux cleaned = 0.000403841 Jy
! Total flux subtracted in 200 components = 0.000403841 Jy
! Clean residual min=-0.001507 max=0.001758 Jy/beam
! Clean residual mean=-0.000003 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.263049 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 137 components and 0.263049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066010Jy  sigma=1.374260
! Fit after  self-cal, rms=0.066008Jy  sigma=1.374214
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.13858e-05 Jy
! Component: 100  -  total flux cleaned = 9.98106e-05 Jy
! Component: 150  -  total flux cleaned = 0.00016398 Jy
! Component: 200  -  total flux cleaned = 0.000236396 Jy
! Total flux subtracted in 200 components = 0.000236396 Jy
! Clean residual min=-0.001522 max=0.001738 Jy/beam
! Clean residual mean=-0.000003 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.263286 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 145 components and 0.263286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066010Jy  sigma=1.374259
! Fit after  self-cal, rms=0.066008Jy  sigma=1.374235
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.897 mas, bpa=1.065 degrees
! Estimated noise=0.263464 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 1.897 at 1.065 degrees (North through East)
! Clean map  min=-0.0016152  max=0.15962 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7907 mas, bmaj=1.633 mas, bpa=-1.59 degrees
! Estimated noise=0.433644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122714 Jy
! Component: 100  -  total flux cleaned = 0.168086 Jy
! Component: 150  -  total flux cleaned = 0.193461 Jy
! Component: 200  -  total flux cleaned = 0.209426 Jy
! Total flux subtracted in 200 components = 0.209426 Jy
! Clean residual min=-0.005431 max=0.008494 Jy/beam
! Clean residual mean=-0.000016 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 0.209426 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.209426 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.897 mas, bpa=1.065 degrees
! Estimated noise=0.263464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153685 Jy
! Component: 100  -  total flux cleaned = 0.0245511 Jy
! Component: 150  -  total flux cleaned = 0.0309065 Jy
! Component: 200  -  total flux cleaned = 0.0354262 Jy
! Total flux subtracted in 200 components = 0.0354262 Jy
! Clean residual min=-0.002271 max=0.002754 Jy/beam
! Clean residual mean=-0.000012 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.244852 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 39 components and 0.244852 Jy
! Inverting map 
! Added new window around map position (19.2, 39.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00342525 Jy
! Component: 100  -  total flux cleaned = 0.00610491 Jy
! Component: 150  -  total flux cleaned = 0.00825079 Jy
! Component: 200  -  total flux cleaned = 0.0100353 Jy
! Total flux subtracted in 200 components = 0.0100353 Jy
! Clean residual min=-0.001789 max=0.001818 Jy/beam
! Clean residual mean=-0.000006 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.254888 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 65 components and 0.254888 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.282 mas, bmaj=2.978 mas, bpa=4.269 degrees
! Estimated noise=0.320796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235462 Jy
! Component: 100  -  total flux cleaned = 0.0040357 Jy
! Component: 150  -  total flux cleaned = 0.005326 Jy
! Component: 200  -  total flux cleaned = 0.00634552 Jy
! Total flux subtracted in 200 components = 0.00634552 Jy
! Clean residual min=-0.001511 max=0.001627 Jy/beam
! Clean residual mean=-0.000006 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.261233 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000724181 Jy
! Component: 100  -  total flux cleaned = 0.00113954 Jy
! Component: 150  -  total flux cleaned = 0.00149999 Jy
! Component: 200  -  total flux cleaned = 0.00173244 Jy
! Total flux subtracted in 200 components = 0.00173244 Jy
! Clean residual min=-0.001367 max=0.001425 Jy/beam
! Clean residual mean=-0.000004 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.262966 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 114 components and 0.262966 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.897 mas, bpa=1.065 degrees
! Estimated noise=0.263464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000252459 Jy
! Component: 100  -  total flux cleaned = 0.000344897 Jy
! Component: 150  -  total flux cleaned = 0.000372195 Jy
! Component: 200  -  total flux cleaned = 0.000398357 Jy
! Total flux subtracted in 200 components = 0.000398357 Jy
! Clean residual min=-0.001581 max=0.001517 Jy/beam
! Clean residual mean=-0.000002 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.263364 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 131 components and 0.263364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065967Jy  sigma=1.373841
! Fit after  self-cal, rms=0.065950Jy  sigma=1.373255
wmodel /J2157+1014_X_map.mod
! wmodel: Unable to open new model file: /J2157+1014_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2157+1014_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 1.897 at 1.065 degrees (North through East)
! Clean map  min=-0.0013843  max=0.15918 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2157+1014_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.159183 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000363581 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.685215 0.685215 1.37043 2.74086 5.48172 10.9634 21.9269 43.8538 87.7075
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.159 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  437.818 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2157+1014_X_dfm.log closed on Thu May 19 23:38:42 2016