! Started logfile: /scr/pima/bg219i_uvs/J2154+1727_X_dfm.log on Thu May 19 23:38:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2154+1727_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2154+1727_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.780159 visibilities/baseline/integration-bin.
! Found source: J2154+1727
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11796 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2154+1727_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029454Jy  sigma=23.492842
! Fit after  self-cal, rms=0.791540Jy  sigma=17.744411
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7967 mas, bmaj=2.137 mas, bpa=-12.67 degrees
! Estimated noise=0.548439 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.152506 Jy
! Component: 100  -  total flux cleaned = 0.214864 Jy
! Total flux subtracted in 100 components = 0.214864 Jy
! Clean residual min=-0.015388 max=0.032712 Jy/beam
! Clean residual mean=-0.000026 rms=0.004122 Jy/beam
! Combined flux in latest and established models = 0.214864 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.214864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100522Jy  sigma=2.197868
! Fit after  self-cal, rms=0.100354Jy  sigma=2.194463
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0406328 Jy
! Component: 100  -  total flux cleaned = 0.067186 Jy
! Total flux subtracted in 100 components = 0.067186 Jy
! Clean residual min=-0.009865 max=0.014285 Jy/beam
! Clean residual mean=-0.000017 rms=0.002373 Jy/beam
! Combined flux in latest and established models = 0.28205 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 14 components and 0.28205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077812Jy  sigma=1.628880
! Fit after  self-cal, rms=0.077732Jy  sigma=1.626994
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017919 Jy
! Component: 100  -  total flux cleaned = 0.0300416 Jy
! Total flux subtracted in 100 components = 0.0300416 Jy
! Clean residual min=-0.009586 max=0.010788 Jy/beam
! Clean residual mean=-0.000013 rms=0.001882 Jy/beam
! Combined flux in latest and established models = 0.312092 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 20 components and 0.312092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072974Jy  sigma=1.503025
! Fit after  self-cal, rms=0.072940Jy  sigma=1.502025
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=2.383 mas, bpa=-10.91 degrees
! Estimated noise=0.324266 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00911547 Jy
! Component: 100  -  total flux cleaned = 0.00956608 Jy
! Component: 150  -  total flux cleaned = 0.0100991 Jy
! Component: 200  -  total flux cleaned = 0.0106703 Jy
! Total flux subtracted in 200 components = 0.0106703 Jy
! Clean residual min=-0.006409 max=0.006877 Jy/beam
! Clean residual mean=-0.000014 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 0.322762 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.322762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071642Jy  sigma=1.464091
! Fit after  self-cal, rms=0.071617Jy  sigma=1.463596
! Inverting map 
! Added new window around map position (6.8, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00473766 Jy
! Component: 100  -  total flux cleaned = 0.00519943 Jy
! Component: 150  -  total flux cleaned = 0.00558125 Jy
! Component: 200  -  total flux cleaned = 0.00602138 Jy
! Total flux subtracted in 200 components = 0.00602138 Jy
! Clean residual min=-0.005889 max=0.004996 Jy/beam
! Clean residual mean=-0.000011 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 0.328783 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 40 components and 0.328783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070902Jy  sigma=1.448468
! Fit after  self-cal, rms=0.070866Jy  sigma=1.447239
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.009 x 2.383 at -10.91 degrees (North through East)
! Clean map  min=-0.004105  max=0.19311 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.12     KP        1.02     
!   LA        1.00     MK        0.98     NL        0.99     OV        1.03     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.10     KP        1.00     
!   LA        0.99     MK        1.03     NL        0.98     OV        0.99     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.07     KP        1.04     
!   LA        0.98     MK        0.98     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.15     KP        1.02     
!   LA        0.98     MK        1.02     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.09     KP        1.02     
!   LA        0.98     MK        1.00     NL        0.99     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.11     KP        1.02     
!   LA        1.00     MK        0.96     NL        0.98     OV        1.00     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.09     KP        1.00     
!   LA        1.02     MK        0.95     NL        0.99     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.14     KP        1.03     
!   LA        1.00     MK        0.98     NL        0.95     OV        0.98     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.11     KP        1.02     
!   LA        1.00     MK        0.99     NL        1.01     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.08     KP        1.03     
!   LA        1.00     MK        0.98     NL        1.00     OV        0.98     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.12     KP        1.02     
!   LA        1.01     MK        0.95     NL        1.01     OV        1.00     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.12     KP        1.01     
!   LA        1.00     MK        0.96     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.070866Jy  sigma=1.447239
! Fit after  self-cal, rms=0.072863Jy  sigma=1.435713
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=2.387 mas, bpa=-10.9 degrees
! Estimated noise=0.325131 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000692815 Jy
! Component: 100  -  total flux cleaned = -0.000398514 Jy
! Component: 150  -  total flux cleaned = -0.000229367 Jy
! Component: 200  -  total flux cleaned = -0.000148942 Jy
! Total flux subtracted in 200 components = -0.000148942 Jy
! Clean residual min=-0.005299 max=0.004530 Jy/beam
! Clean residual mean=-0.000005 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.328634 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 56 components and 0.328634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072580Jy  sigma=1.431329
! Fit after  self-cal, rms=0.072596Jy  sigma=1.431093
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072596Jy  sigma=1.431093
! Fit after  self-cal, rms=0.072504Jy  sigma=1.421789
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.386 mas, bpa=-11.12 degrees
! Estimated noise=0.325012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000504844 Jy
! Component: 100  -  total flux cleaned = 0.000431402 Jy
! Component: 150  -  total flux cleaned = 0.000299587 Jy
! Component: 200  -  total flux cleaned = 0.000299371 Jy
! Total flux subtracted in 200 components = 0.000299371 Jy
! Clean residual min=-0.005187 max=0.004130 Jy/beam
! Clean residual mean=0.000001 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.328934 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 0.328934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072335Jy  sigma=1.419642
! Fit after  self-cal, rms=0.072332Jy  sigma=1.419458
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170439 Jy
! Component: 100  -  total flux cleaned = 0.000116722 Jy
! Component: 150  -  total flux cleaned = 0.000117963 Jy
! Component: 200  -  total flux cleaned = 0.000117905 Jy
! Total flux subtracted in 200 components = 0.000117905 Jy
! Clean residual min=-0.005106 max=0.004099 Jy/beam
! Clean residual mean=0.000001 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.329052 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 69 components and 0.329052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072212Jy  sigma=1.418153
! Fit after  self-cal, rms=0.072206Jy  sigma=1.418078
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072206Jy  sigma=1.418078
! Fit after  self-cal, rms=0.072205Jy  sigma=1.417856
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=2.387 mas, bpa=-11.23 degrees
! Estimated noise=0.3248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000625233 Jy
! Component: 100  -  total flux cleaned = 0.000573798 Jy
! Component: 150  -  total flux cleaned = 0.000573559 Jy
! Component: 200  -  total flux cleaned = 0.000524819 Jy
! Total flux subtracted in 200 components = 0.000524819 Jy
! Clean residual min=-0.004904 max=0.003984 Jy/beam
! Clean residual mean=0.000001 rms=0.000756 Jy/beam
! Combined flux in latest and established models = 0.329576 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 72 components and 0.329576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072095Jy  sigma=1.416621
! Fit after  self-cal, rms=0.072089Jy  sigma=1.416533
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287843 Jy
! Component: 100  -  total flux cleaned = 0.000239388 Jy
! Component: 150  -  total flux cleaned = 0.00019061 Jy
! Component: 200  -  total flux cleaned = 0.000189002 Jy
! Total flux subtracted in 200 components = 0.000189002 Jy
! Clean residual min=-0.004860 max=0.003962 Jy/beam
! Clean residual mean=0.000001 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.329765 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 73 components and 0.329765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072007Jy  sigma=1.415622
! Fit after  self-cal, rms=0.072003Jy  sigma=1.415578
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072003Jy  sigma=1.415578
! Fit after  self-cal, rms=0.071925Jy  sigma=1.415395
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.135 mas, bmaj=3.033 mas, bpa=-5.373 degrees
! Estimated noise=0.379824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0015537 Jy
! Component: 100  -  total flux cleaned = -0.00207779 Jy
! Component: 150  -  total flux cleaned = -0.00225554 Jy
! Component: 200  -  total flux cleaned = -0.00236315 Jy
! Total flux subtracted in 200 components = -0.00236315 Jy
! Clean residual min=-0.002685 max=0.003179 Jy/beam
! Clean residual mean=-0.000001 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.327402 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 85 components and 0.327402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071928Jy  sigma=1.415530
! Fit after  self-cal, rms=0.071920Jy  sigma=1.415472
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.2, 6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00299451 Jy
! Component: 100  -  total flux cleaned = 0.00367306 Jy
! Component: 150  -  total flux cleaned = 0.00393437 Jy
! Component: 200  -  total flux cleaned = 0.00394518 Jy
! Total flux subtracted in 200 components = 0.00394518 Jy
! Clean residual min=-0.001960 max=0.002583 Jy/beam
! Clean residual mean=-0.000002 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.331348 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 116 components and 0.331348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071699Jy  sigma=1.410597
! Fit after  self-cal, rms=0.071693Jy  sigma=1.410397
! Inverting map 
! Added new window around map position (-4, 38.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175356 Jy
! Component: 100  -  total flux cleaned = 0.00247544 Jy
! Component: 150  -  total flux cleaned = 0.00277038 Jy
! Component: 200  -  total flux cleaned = 0.00303216 Jy
! Total flux subtracted in 200 components = 0.00303216 Jy
! Clean residual min=-0.001695 max=0.002073 Jy/beam
! Clean residual mean=-0.000001 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.33438 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 143 components and 0.33438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071543Jy  sigma=1.407531
! Fit after  self-cal, rms=0.071538Jy  sigma=1.407447
! Inverting map 
! Added new window around map position (-29, -30.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127086 Jy
! Component: 100  -  total flux cleaned = 0.00165546 Jy
! Component: 150  -  total flux cleaned = 0.00204202 Jy
! Component: 200  -  total flux cleaned = 0.00235678 Jy
! Total flux subtracted in 200 components = 0.00235678 Jy
! Clean residual min=-0.001481 max=0.001540 Jy/beam
! Clean residual mean=-0.000002 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.336737 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 169 components and 0.336737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071453Jy  sigma=1.406169
! Fit after  self-cal, rms=0.071447Jy  sigma=1.406111
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9993 mas, bmaj=2.386 mas, bpa=-11.32 degrees
! Estimated noise=0.324415 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9993 x 2.386 at -11.32 degrees (North through East)
! Clean map  min=-0.0037482  max=0.19114 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7877 mas, bmaj=2.142 mas, bpa=-13.13 degrees
! Estimated noise=0.547223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153 Jy
! Component: 100  -  total flux cleaned = 0.215679 Jy
! Component: 150  -  total flux cleaned = 0.255022 Jy
! Component: 200  -  total flux cleaned = 0.28082 Jy
! Total flux subtracted in 200 components = 0.28082 Jy
! Clean residual min=-0.009669 max=0.013888 Jy/beam
! Clean residual mean=-0.000011 rms=0.002221 Jy/beam
! Combined flux in latest and established models = 0.28082 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.28082 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9993 mas, bmaj=2.386 mas, bpa=-11.32 degrees
! Estimated noise=0.324415 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204523 Jy
! Component: 100  -  total flux cleaned = 0.0317221 Jy
! Component: 150  -  total flux cleaned = 0.0390445 Jy
! Component: 200  -  total flux cleaned = 0.0442294 Jy
! Total flux subtracted in 200 components = 0.0442294 Jy
! Clean residual min=-0.005681 max=0.005375 Jy/beam
! Clean residual mean=-0.000004 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.325049 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 35 components and 0.325049 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.135 mas, bmaj=3.033 mas, bpa=-5.373 degrees
! Estimated noise=0.379824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00445652 Jy
! Component: 100  -  total flux cleaned = 0.00733078 Jy
! Component: 150  -  total flux cleaned = 0.00905823 Jy
! Component: 200  -  total flux cleaned = 0.0104777 Jy
! Total flux subtracted in 200 components = 0.0104777 Jy
! Clean residual min=-0.002444 max=0.002131 Jy/beam
! Clean residual mean=-0.000002 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.335527 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000520318 Jy
! Component: 100  -  total flux cleaned = 0.00112726 Jy
! Component: 150  -  total flux cleaned = 0.00149984 Jy
! Component: 200  -  total flux cleaned = 0.0019039 Jy
! Total flux subtracted in 200 components = 0.0019039 Jy
! Clean residual min=-0.002045 max=0.001897 Jy/beam
! Clean residual mean=-0.000002 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.337431 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 100 components and 0.337431 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9993 mas, bmaj=2.386 mas, bpa=-11.32 degrees
! Estimated noise=0.324415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000497001 Jy
! Component: 100  -  total flux cleaned = 0.000448508 Jy
! Component: 150  -  total flux cleaned = 0.00144244 Jy
! Component: 200  -  total flux cleaned = 0.00235572 Jy
! Total flux subtracted in 200 components = 0.00235572 Jy
! Clean residual min=-0.004473 max=0.004096 Jy/beam
! Clean residual mean=-0.000002 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.339786 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 126 components and 0.339786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072195Jy  sigma=1.419436
! Fit after  self-cal, rms=0.072120Jy  sigma=1.417924
wmodel /J2154+1727_X_map.mod
! wmodel: Unable to open new model file: /J2154+1727_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2154+1727_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9993 x 2.386 at -11.32 degrees (North through East)
! Clean map  min=-0.0030921  max=0.1913 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2154+1727_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.191302 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000708454 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.111 1.111 2.22199 4.44399 8.88798 17.776 35.5519 71.1038
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.191 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  270.027 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2154+1727_X_dfm.log closed on Thu May 19 23:38:26 2016