! Started logfile: /scr/pima/bg219i_uvs/J2150-1822_S_dfm.log on Thu May 19 23:37:56 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219i_uvs/J2150-1822_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J2150-1822_S_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J2150-1822 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 10044 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2150-1822_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005852Jy sigma=19.771061 ! Fit after self-cal, rms=0.905760Jy sigma=17.797090 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=6.273 mas, bpa=-3.795 degrees ! Estimated noise=0.534222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0729245 Jy ! Component: 100 - total flux cleaned = 0.0892146 Jy ! Total flux subtracted in 100 components = 0.0892146 Jy ! Clean residual min=-0.004029 max=0.005605 Jy/beam ! Clean residual mean=-0.000009 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.0892146 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0892146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073403Jy sigma=1.377140 ! Fit after self-cal, rms=0.073373Jy sigma=1.376884 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.417 mas, bpa=-4.499 degrees ! Estimated noise=0.384327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00889432 Jy ! Component: 100 - total flux cleaned = 0.0129758 Jy ! Component: 150 - total flux cleaned = 0.0150743 Jy ! Component: 200 - total flux cleaned = 0.0162404 Jy ! Total flux subtracted in 200 components = 0.0162404 Jy ! Clean residual min=-0.002527 max=0.003033 Jy/beam ! Clean residual mean=-0.000004 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.105455 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 37 components and 0.105455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072495Jy sigma=1.355427 ! Fit after self-cal, rms=0.072458Jy sigma=1.355180 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.014 x 7.417 at -4.499 degrees (North through East) ! Clean map min=-0.002413 max=0.096884 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.10 KP 0.99 ! LA 0.96 MK 1.01 NL 1.07 OV 0.99 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.10 KP 0.95 ! LA 0.99 MK 1.01 NL 1.03 OV 0.99 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.13 KP 0.98 ! LA 1.01 MK 0.99 NL 0.96 OV 1.03 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.92 HN 1.11 KP 1.00 ! LA 0.96 MK 1.02 NL 1.01 OV 0.99 ! PT 0.95 SC 1.00 ! ! ! Fit before self-cal, rms=0.072458Jy sigma=1.355180 ! Fit after self-cal, rms=0.073102Jy sigma=1.349758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=7.423 mas, bpa=-4.073 degrees ! Estimated noise=0.382844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000516904 Jy ! Component: 100 - total flux cleaned = -0.000517795 Jy ! Component: 150 - total flux cleaned = -0.000517326 Jy ! Component: 200 - total flux cleaned = -0.000538811 Jy ! Total flux subtracted in 200 components = -0.000538811 Jy ! Clean residual min=-0.002224 max=0.002061 Jy/beam ! Clean residual mean=-0.000000 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.104916 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.104916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073092Jy sigma=1.349626 ! Fit after self-cal, rms=0.073144Jy sigma=1.349460 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073144Jy sigma=1.349460 ! Fit after self-cal, rms=0.074890Jy sigma=1.345251 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=7.437 mas, bpa=-4.163 degrees ! Estimated noise=0.38349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.41313e-05 Jy ! Component: 100 - total flux cleaned = 8.23987e-05 Jy ! Component: 150 - total flux cleaned = 8.2303e-05 Jy ! Component: 200 - total flux cleaned = 7.50758e-05 Jy ! Total flux subtracted in 200 components = 7.50758e-05 Jy ! Clean residual min=-0.001767 max=0.001770 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.104991 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.104991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074889Jy sigma=1.345223 ! Fit after self-cal, rms=0.074930Jy sigma=1.345128 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.94891e-07 Jy ! Component: 100 - total flux cleaned = -6.49876e-07 Jy ! Component: 150 - total flux cleaned = -5.93653e-07 Jy ! Component: 200 - total flux cleaned = -3.36083e-07 Jy ! Total flux subtracted in 200 components = -3.36083e-07 Jy ! Clean residual min=-0.001762 max=0.001742 Jy/beam ! Clean residual mean=-0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.104991 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.104991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074929Jy sigma=1.345106 ! Fit after self-cal, rms=0.074929Jy sigma=1.345104 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074929Jy sigma=1.345104 ! Fit after self-cal, rms=0.075025Jy sigma=1.345099 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=7.434 mas, bpa=-4.183 degrees ! Estimated noise=0.383629 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.77502e-05 Jy ! Component: 100 - total flux cleaned = 7.80729e-05 Jy ! Component: 150 - total flux cleaned = 7.81661e-05 Jy ! Component: 200 - total flux cleaned = 7.82818e-05 Jy ! Total flux subtracted in 200 components = 7.82818e-05 Jy ! Clean residual min=-0.001762 max=0.001755 Jy/beam ! Clean residual mean=-0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.105069 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.105069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075023Jy sigma=1.345077 ! Fit after self-cal, rms=0.075025Jy sigma=1.345077 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.53896e-06 Jy ! Component: 100 - total flux cleaned = -6.37443e-06 Jy ! Component: 150 - total flux cleaned = -1.05939e-06 Jy ! Component: 200 - total flux cleaned = -6.56335e-06 Jy ! Total flux subtracted in 200 components = -6.56335e-06 Jy ! Clean residual min=-0.001760 max=0.001753 Jy/beam ! Clean residual mean=-0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.105063 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.105063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075024Jy sigma=1.345061 ! Fit after self-cal, rms=0.075024Jy sigma=1.345059 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075024Jy sigma=1.345059 ! Fit after self-cal, rms=0.075058Jy sigma=1.345057 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.49 mas, bmaj=14.88 mas, bpa=3.985 degrees ! Estimated noise=0.501974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500896 Jy ! Component: 100 - total flux cleaned = 0.000492691 Jy ! Component: 150 - total flux cleaned = 0.00049293 Jy ! Component: 200 - total flux cleaned = 0.000488123 Jy ! Total flux subtracted in 200 components = 0.000488123 Jy ! Clean residual min=-0.001900 max=0.002152 Jy/beam ! Clean residual mean=-0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.105551 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.105551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075062Jy sigma=1.345116 ! Fit after self-cal, rms=0.075062Jy sigma=1.345084 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.88675e-05 Jy ! Component: 100 - total flux cleaned = 6.86848e-05 Jy ! Component: 150 - total flux cleaned = 6.36527e-05 Jy ! Component: 200 - total flux cleaned = 7.23612e-05 Jy ! Total flux subtracted in 200 components = 7.23612e-05 Jy ! Clean residual min=-0.001898 max=0.002143 Jy/beam ! Clean residual mean=-0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.105623 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.105623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075065Jy sigma=1.345129 ! Fit after self-cal, rms=0.075064Jy sigma=1.345113 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=7.431 mas, bpa=-4.199 degrees ! Estimated noise=0.383751 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 7.431 at -4.199 degrees (North through East) ! Clean map min=-0.0016551 max=0.096651 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.545 mas, bmaj=6.271 mas, bpa=-3.47 degrees ! Estimated noise=0.537983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0733095 Jy ! Component: 100 - total flux cleaned = 0.0898535 Jy ! Component: 150 - total flux cleaned = 0.0961565 Jy ! Component: 200 - total flux cleaned = 0.0997142 Jy ! Total flux subtracted in 200 components = 0.0997142 Jy ! Clean residual min=-0.003263 max=0.002871 Jy/beam ! Clean residual mean=-0.000004 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0997142 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0997142 Jy ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=7.431 mas, bpa=-4.199 degrees ! Estimated noise=0.383751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325665 Jy ! Component: 100 - total flux cleaned = 0.004531 Jy ! Component: 150 - total flux cleaned = 0.00516493 Jy ! Component: 200 - total flux cleaned = 0.00532661 Jy ! Total flux subtracted in 200 components = 0.00532661 Jy ! Clean residual min=-0.001709 max=0.001765 Jy/beam ! Clean residual mean=-0.000001 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.105041 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.105041 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.49 mas, bmaj=14.88 mas, bpa=3.985 degrees ! Estimated noise=0.501974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524242 Jy ! Component: 100 - total flux cleaned = 0.000524538 Jy ! Component: 150 - total flux cleaned = 0.000541847 Jy ! Component: 200 - total flux cleaned = 0.00055535 Jy ! Total flux subtracted in 200 components = 0.00055535 Jy ! Clean residual min=-0.001903 max=0.002107 Jy/beam ! Clean residual mean=-0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.105596 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.81887e-06 Jy ! Component: 100 - total flux cleaned = 1.17223e-05 Jy ! Component: 150 - total flux cleaned = 1.16357e-05 Jy ! Component: 200 - total flux cleaned = 1.71877e-05 Jy ! Total flux subtracted in 200 components = 1.71877e-05 Jy ! Clean residual min=-0.001906 max=0.002109 Jy/beam ! Clean residual mean=-0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.105613 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.105613 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=7.431 mas, bpa=-4.199 degrees ! Estimated noise=0.383751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000441538 Jy ! Component: 100 - total flux cleaned = -0.000373455 Jy ! Component: 150 - total flux cleaned = -0.000340134 Jy ! Component: 200 - total flux cleaned = -0.000339643 Jy ! Total flux subtracted in 200 components = -0.000339643 Jy ! Clean residual min=-0.001712 max=0.001740 Jy/beam ! Clean residual mean=-0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.105274 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.105274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075064Jy sigma=1.345087 ! Fit after self-cal, rms=0.075063Jy sigma=1.345077 wmodel /J2150-1822_S_map.mod ! wmodel: Unable to open new model file: /J2150-1822_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219i_uvs/J2150-1822_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 7.431 at -4.199 degrees (North through East) ! Clean map min=-0.0016381 max=0.096571 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2150-1822_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0965711 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00044834 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.39278 1.39278 2.78555 5.5711 11.1422 22.2844 44.5688 89.1377 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.096 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 215.397 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J2150-1822_S_dfm.log closed on Thu May 19 23:37:58 2016