! Started logfile: /scr/pima/bg219i_uvs/J2148-1723_X_dfm.log on Thu May 19 23:37:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2148-1723_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2148-1723_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.831481 visibilities/baseline/integration-bin.
! Found source: J2148-1723
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16164 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2148-1723_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.197636Jy  sigma=22.126338
! Fit after  self-cal, rms=0.391586Jy  sigma=7.183865
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6357 mas, bmaj=1.591 mas, bpa=-2.133 degrees
! Estimated noise=0.591751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.469146 Jy
! Component: 100  -  total flux cleaned = 0.574833 Jy
! Total flux subtracted in 100 components = 0.574833 Jy
! Clean residual min=-0.020491 max=0.055715 Jy/beam
! Clean residual mean=0.000011 rms=0.005247 Jy/beam
! Combined flux in latest and established models = 0.574833 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.574833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.137751Jy  sigma=2.472027
! Fit after  self-cal, rms=0.137708Jy  sigma=2.471509
! Inverting map 
! Added new window around map position (2, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0549564 Jy
! Component: 100  -  total flux cleaned = 0.0890039 Jy
! Total flux subtracted in 100 components = 0.0890039 Jy
! Clean residual min=-0.012773 max=0.020047 Jy/beam
! Clean residual mean=0.000008 rms=0.003180 Jy/beam
! Combined flux in latest and established models = 0.663837 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.663837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100232Jy  sigma=1.768736
! Fit after  self-cal, rms=0.099101Jy  sigma=1.744376
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0252127 Jy
! Component: 100  -  total flux cleaned = 0.0428738 Jy
! Total flux subtracted in 100 components = 0.0428738 Jy
! Clean residual min=-0.009574 max=0.015591 Jy/beam
! Clean residual mean=0.000007 rms=0.002343 Jy/beam
! Combined flux in latest and established models = 0.706711 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.706711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087498Jy  sigma=1.512705
! Fit after  self-cal, rms=0.087189Jy  sigma=1.505875
! Inverting map 
! Added new window around map position (-8, 6.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153849 Jy
! Component: 100  -  total flux cleaned = 0.0267409 Jy
! Total flux subtracted in 100 components = 0.0267409 Jy
! Clean residual min=-0.007650 max=0.012132 Jy/beam
! Clean residual mean=0.000006 rms=0.001973 Jy/beam
! Combined flux in latest and established models = 0.733451 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 38 components and 0.733451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082652Jy  sigma=1.418319
! Fit after  self-cal, rms=0.082509Jy  sigma=1.415062
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8056 mas, bmaj=1.948 mas, bpa=-1.271 degrees
! Estimated noise=0.332667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173283 Jy
! Component: 100  -  total flux cleaned = 0.0286902 Jy
! Component: 150  -  total flux cleaned = 0.0369726 Jy
! Component: 200  -  total flux cleaned = 0.0431134 Jy
! Total flux subtracted in 200 components = 0.0431134 Jy
! Clean residual min=-0.006460 max=0.009870 Jy/beam
! Clean residual mean=0.000012 rms=0.001910 Jy/beam
! Combined flux in latest and established models = 0.776565 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 71 components and 0.776565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078266Jy  sigma=1.322606
! Fit after  self-cal, rms=0.078148Jy  sigma=1.319472
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8056 x 1.948 at -1.271 degrees (North through East)
! Clean map  min=-0.0059748  max=0.61662 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.05     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.00     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.04     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.03     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.95     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        0.99     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.04     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.03     KP        1.00     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.96     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.97     MK        0.99     NL        0.99     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.01     KP        0.99     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.95     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.03     KP        0.99     
!   LA        0.97     MK        0.99     NL        0.99     OV        0.95     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.03     KP        0.97     
!   LA        0.97     MK        0.99     NL        0.98     OV        0.96     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.02     KP        0.98     
!   LA        0.97     MK        0.99     NL        0.98     OV        0.94     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.078148Jy  sigma=1.319472
! Fit after  self-cal, rms=0.075943Jy  sigma=1.275000
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8075 mas, bmaj=1.949 mas, bpa=-1.163 degrees
! Estimated noise=0.33028 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495193 Jy
! Component: 100  -  total flux cleaned = 0.000899017 Jy
! Component: 150  -  total flux cleaned = 0.00101616 Jy
! Component: 200  -  total flux cleaned = 0.00111665 Jy
! Total flux subtracted in 200 components = 0.00111665 Jy
! Clean residual min=-0.007185 max=0.006827 Jy/beam
! Clean residual mean=0.000011 rms=0.001385 Jy/beam
! Combined flux in latest and established models = 0.777682 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 84 components and 0.777682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075536Jy  sigma=1.268391
! Fit after  self-cal, rms=0.075545Jy  sigma=1.268128
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075545Jy  sigma=1.268128
! Fit after  self-cal, rms=0.073749Jy  sigma=1.227488
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8068 mas, bmaj=1.947 mas, bpa=-1.244 degrees
! Estimated noise=0.330952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0031923 Jy
! Component: 100  -  total flux cleaned = -0.00368313 Jy
! Component: 150  -  total flux cleaned = -0.00376992 Jy
! Component: 200  -  total flux cleaned = -0.00377142 Jy
! Total flux subtracted in 200 components = -0.00377142 Jy
! Clean residual min=-0.003783 max=0.004292 Jy/beam
! Clean residual mean=0.000004 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.77391 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.77391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073465Jy  sigma=1.222543
! Fit after  self-cal, rms=0.073454Jy  sigma=1.221701
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.6, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00442723 Jy
! Component: 100  -  total flux cleaned = 0.00594244 Jy
! Component: 150  -  total flux cleaned = 0.00623377 Jy
! Component: 200  -  total flux cleaned = 0.0062959 Jy
! Total flux subtracted in 200 components = 0.0062959 Jy
! Clean residual min=-0.003420 max=0.002996 Jy/beam
! Clean residual mean=0.000004 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.780206 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 0.780206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073148Jy  sigma=1.216031
! Fit after  self-cal, rms=0.073116Jy  sigma=1.215477
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073116Jy  sigma=1.215477
! Fit after  self-cal, rms=0.073196Jy  sigma=1.214260
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8062 mas, bmaj=1.947 mas, bpa=-1.254 degrees
! Estimated noise=0.330788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000404866 Jy
! Component: 100  -  total flux cleaned = -0.000474985 Jy
! Component: 150  -  total flux cleaned = -0.000371185 Jy
! Component: 200  -  total flux cleaned = -0.000371933 Jy
! Total flux subtracted in 200 components = -0.000371933 Jy
! Clean residual min=-0.003098 max=0.002431 Jy/beam
! Clean residual mean=0.000002 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.779834 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 127 components and 0.779834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073060Jy  sigma=1.211977
! Fit after  self-cal, rms=0.073047Jy  sigma=1.211611
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.87668e-05 Jy
! Component: 100  -  total flux cleaned = -7.30618e-05 Jy
! Component: 150  -  total flux cleaned = -0.000111967 Jy
! Component: 200  -  total flux cleaned = -0.000149294 Jy
! Total flux subtracted in 200 components = -0.000149294 Jy
! Clean residual min=-0.002939 max=0.002206 Jy/beam
! Clean residual mean=0.000003 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.779685 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 134 components and 0.779685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072988Jy  sigma=1.210632
! Fit after  self-cal, rms=0.072985Jy  sigma=1.210510
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072985Jy  sigma=1.210510
! Fit after  self-cal, rms=0.073054Jy  sigma=1.210052
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=4.182 mas, bpa=5.922 degrees
! Estimated noise=0.441854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000613622 Jy
! Component: 100  -  total flux cleaned = -0.000348411 Jy
! Component: 150  -  total flux cleaned = -0.000384594 Jy
! Component: 200  -  total flux cleaned = -0.000414506 Jy
! Total flux subtracted in 200 components = -0.000414506 Jy
! Clean residual min=-0.003737 max=0.002990 Jy/beam
! Clean residual mean=0.000004 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.779271 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 142 components and 0.779271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073018Jy  sigma=1.209602
! Fit after  self-cal, rms=0.073014Jy  sigma=1.209430
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000174801 Jy
! Component: 100  -  total flux cleaned = -0.000174962 Jy
! Component: 150  -  total flux cleaned = -0.000224232 Jy
! Component: 200  -  total flux cleaned = -0.00024678 Jy
! Total flux subtracted in 200 components = -0.00024678 Jy
! Clean residual min=-0.003643 max=0.002744 Jy/beam
! Clean residual mean=0.000004 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.779024 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 144 components and 0.779024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073006Jy  sigma=1.209339
! Fit after  self-cal, rms=0.073004Jy  sigma=1.209313
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8059 mas, bmaj=1.946 mas, bpa=-1.268 degrees
! Estimated noise=0.33067 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8059 x 1.946 at -1.268 degrees (North through East)
! Clean map  min=-0.0025643  max=0.61404 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073004Jy  sigma=1.209313
! Fit after  self-cal, rms=0.068457Jy  sigma=1.107185
! Inverting map and beam 
! Estimated beam: bmin=0.8054 mas, bmaj=1.946 mas, bpa=-1.323 degrees
! Estimated noise=0.330487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000913857 Jy
! Component: 100  -  total flux cleaned = -0.00100041 Jy
! Component: 150  -  total flux cleaned = -0.00107692 Jy
! Component: 200  -  total flux cleaned = -0.00114462 Jy
! Total flux subtracted in 200 components = -0.00114462 Jy
! Clean residual min=-0.002331 max=0.002122 Jy/beam
! Clean residual mean=0.000002 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.777879 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 157 components and 0.777879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068406Jy  sigma=1.106240
! Fit after  self-cal, rms=0.068405Jy  sigma=1.106154
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149548 Jy
! Component: 100  -  total flux cleaned = -0.000180248 Jy
! Component: 150  -  total flux cleaned = -0.000239182 Jy
! Component: 200  -  total flux cleaned = -0.000294104 Jy
! Total flux subtracted in 200 components = -0.000294104 Jy
! Clean residual min=-0.002263 max=0.002065 Jy/beam
! Clean residual mean=0.000002 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.777585 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 162 components and 0.777585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068378Jy  sigma=1.105677
! Fit after  self-cal, rms=0.068379Jy  sigma=1.105638
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068379Jy  sigma=1.105638
! Fit after  self-cal, rms=0.068343Jy  sigma=1.104191
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6356 mas, bmaj=1.588 mas, bpa=-2.192 degrees
! Estimated noise=0.588165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.466193 Jy
! Component: 100  -  total flux cleaned = 0.574684 Jy
! Component: 150  -  total flux cleaned = 0.62913 Jy
! Component: 200  -  total flux cleaned = 0.664171 Jy
! Total flux subtracted in 200 components = 0.664171 Jy
! Clean residual min=-0.009309 max=0.019088 Jy/beam
! Clean residual mean=0.000005 rms=0.002455 Jy/beam
! Combined flux in latest and established models = 0.664171 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.664171 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8053 mas, bmaj=1.946 mas, bpa=-1.327 degrees
! Estimated noise=0.330339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386788 Jy
! Component: 100  -  total flux cleaned = 0.0616002 Jy
! Component: 150  -  total flux cleaned = 0.076247 Jy
! Component: 200  -  total flux cleaned = 0.0861489 Jy
! Total flux subtracted in 200 components = 0.0861489 Jy
! Clean residual min=-0.003324 max=0.005887 Jy/beam
! Clean residual mean=0.000003 rms=0.001059 Jy/beam
! Combined flux in latest and established models = 0.75032 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 52 components and 0.750319 Jy
! Inverting map 
! Added new window around map position (-0.6, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0069514 Jy
! Component: 100  -  total flux cleaned = 0.0120274 Jy
! Component: 150  -  total flux cleaned = 0.0160105 Jy
! Component: 200  -  total flux cleaned = 0.0191947 Jy
! Total flux subtracted in 200 components = 0.0191947 Jy
! Clean residual min=-0.002405 max=0.002810 Jy/beam
! Clean residual mean=0.000002 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.769514 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 85 components and 0.769514 Jy
! Inverting map 
! Added new window around map position (5.4, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00289258 Jy
! Component: 100  -  total flux cleaned = 0.00476901 Jy
! Component: 150  -  total flux cleaned = 0.00591007 Jy
! Component: 200  -  total flux cleaned = 0.00689871 Jy
! Total flux subtracted in 200 components = 0.00689871 Jy
! Clean residual min=-0.002150 max=0.002284 Jy/beam
! Clean residual mean=0.000001 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.776413 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 117 components and 0.776413 Jy
! Inverting map 
! Added new window around map position (11.8, 7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203978 Jy
! Component: 100  -  total flux cleaned = 0.00290944 Jy
! Component: 150  -  total flux cleaned = 0.00358333 Jy
! Component: 200  -  total flux cleaned = 0.00405773 Jy
! Total flux subtracted in 200 components = 0.00405773 Jy
! Clean residual min=-0.002058 max=0.002080 Jy/beam
! Clean residual mean=0.000002 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.78047 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 135 components and 0.780471 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=4.18 mas, bpa=5.924 degrees
! Estimated noise=0.441812 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162333 Jy
! Component: 100  -  total flux cleaned = 0.00236811 Jy
! Component: 150  -  total flux cleaned = 0.00273912 Jy
! Component: 200  -  total flux cleaned = 0.00286042 Jy
! Total flux subtracted in 200 components = 0.00286042 Jy
! Clean residual min=-0.002732 max=0.002385 Jy/beam
! Clean residual mean=0.000004 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.783331 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.23718e-07 Jy
! Component: 100  -  total flux cleaned = 2.27186e-05 Jy
! Component: 150  -  total flux cleaned = 1.15798e-07 Jy
! Component: 200  -  total flux cleaned = -1.96026e-05 Jy
! Total flux subtracted in 200 components = -1.96026e-05 Jy
! Clean residual min=-0.002645 max=0.002246 Jy/beam
! Clean residual mean=0.000004 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.783311 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 166 components and 0.783311 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8053 mas, bmaj=1.946 mas, bpa=-1.327 degrees
! Estimated noise=0.330339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108824 Jy
! Component: 100  -  total flux cleaned = 6.9432e-05 Jy
! Component: 150  -  total flux cleaned = 3.50228e-05 Jy
! Component: 200  -  total flux cleaned = 3.50249e-06 Jy
! Total flux subtracted in 200 components = 3.50249e-06 Jy
! Clean residual min=-0.001860 max=0.001831 Jy/beam
! Clean residual mean=0.000002 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.783315 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 183 components and 0.783315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068243Jy  sigma=1.102215
! Fit after  self-cal, rms=0.068215Jy  sigma=1.101633
wmodel /J2148-1723_X_map.mod
! wmodel: Unable to open new model file: /J2148-1723_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2148-1723_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8053 x 1.946 at -1.327 degrees (North through East)
! Clean map  min=-0.0017908  max=0.61464 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2148-1723_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.614636 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000442173 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.215822 0.215822 0.431644 0.863288 1.72658 3.45315 6.9063 13.8126 27.6252 55.2504
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.614 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1390.04 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2148-1723_X_dfm.log closed on Thu May 19 23:37:54 2016