! Started logfile: /scr/pima/bg219i_uvs/J2138-2439_X_dfm.log on Thu May 19 23:36:52 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2138-2439_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2138-2439_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.819841 visibilities/baseline/integration-bin.
! Found source: J2138-2439
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12396 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2138-2439_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.102288Jy  sigma=20.356505
! Fit after  self-cal, rms=0.560117Jy  sigma=10.157871
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5845 mas, bmaj=1.615 mas, bpa=-3.814 degrees
! Estimated noise=0.606683 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.31815 Jy
! Component: 100  -  total flux cleaned = 0.402654 Jy
! Total flux subtracted in 100 components = 0.402654 Jy
! Clean residual min=-0.017958 max=0.047483 Jy/beam
! Clean residual mean=-0.000022 rms=0.004604 Jy/beam
! Combined flux in latest and established models = 0.402654 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.402654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.136902Jy  sigma=2.510302
! Fit after  self-cal, rms=0.136845Jy  sigma=2.509403
! Inverting map 
! Added new window around map position (0.6, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0513806 Jy
! Component: 100  -  total flux cleaned = 0.083063 Jy
! Total flux subtracted in 100 components = 0.083063 Jy
! Clean residual min=-0.012889 max=0.021726 Jy/beam
! Clean residual mean=-0.000010 rms=0.002712 Jy/beam
! Combined flux in latest and established models = 0.485717 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.485717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100805Jy  sigma=1.766084
! Fit after  self-cal, rms=0.100106Jy  sigma=1.754913
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223588 Jy
! Component: 100  -  total flux cleaned = 0.037224 Jy
! Total flux subtracted in 100 components = 0.037224 Jy
! Clean residual min=-0.009191 max=0.015284 Jy/beam
! Clean residual mean=-0.000005 rms=0.002041 Jy/beam
! Combined flux in latest and established models = 0.522941 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.522941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090713Jy  sigma=1.536939
! Fit after  self-cal, rms=0.090469Jy  sigma=1.532957
! Inverting map 
! Added new window around map position (3.8, -16.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129899 Jy
! Component: 100  -  total flux cleaned = 0.0220326 Jy
! Total flux subtracted in 100 components = 0.0220326 Jy
! Clean residual min=-0.008191 max=0.011221 Jy/beam
! Clean residual mean=-0.000003 rms=0.001739 Jy/beam
! Combined flux in latest and established models = 0.544973 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 39 components and 0.544973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087477Jy  sigma=1.463049
! Fit after  self-cal, rms=0.087308Jy  sigma=1.459515
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7621 mas, bmaj=1.994 mas, bpa=-3.124 degrees
! Estimated noise=0.384301 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153026 Jy
! Component: 100  -  total flux cleaned = 0.0245719 Jy
! Component: 150  -  total flux cleaned = 0.0308855 Jy
! Component: 200  -  total flux cleaned = 0.0353671 Jy
! Total flux subtracted in 200 components = 0.0353671 Jy
! Clean residual min=-0.006607 max=0.009143 Jy/beam
! Clean residual mean=-0.000005 rms=0.001709 Jy/beam
! Combined flux in latest and established models = 0.58034 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 67 components and 0.58034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084782Jy  sigma=1.390972
! Fit after  self-cal, rms=0.084696Jy  sigma=1.388656
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7621 x 1.994 at -3.124 degrees (North through East)
! Clean map  min=-0.0065171  max=0.43759 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.08     KP        0.96     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.97     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        1.06     KP        0.96     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.09     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.00     OV        0.95     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.11     KP        0.97     
!   LA        0.95     MK        0.98     NL        1.00     OV        0.96     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.08     KP        0.97     
!   LA        0.97     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.09     KP        0.98     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.07     KP        0.96     
!   LA        0.99     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.08     KP        0.98     
!   LA        0.98     MK        1.02     NL        0.99     OV        0.96     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.06     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.08     KP        0.98     
!   LA        0.97     MK        0.98     NL        1.00     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.07     KP        0.96     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.96     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.07     KP        0.97     
!   LA        0.98     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.084696Jy  sigma=1.388656
! Fit after  self-cal, rms=0.084032Jy  sigma=1.341864
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.766 mas, bmaj=1.992 mas, bpa=-2.878 degrees
! Estimated noise=0.383179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00168686 Jy
! Component: 100  -  total flux cleaned = -0.00233544 Jy
! Component: 150  -  total flux cleaned = -0.00290699 Jy
! Component: 200  -  total flux cleaned = -0.00342083 Jy
! Total flux subtracted in 200 components = -0.00342083 Jy
! Clean residual min=-0.004785 max=0.004582 Jy/beam
! Clean residual mean=0.000003 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.57692 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 82 components and 0.57692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083835Jy  sigma=1.338688
! Fit after  self-cal, rms=0.083866Jy  sigma=1.338389
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083866Jy  sigma=1.338389
! Fit after  self-cal, rms=0.083798Jy  sigma=1.338213
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7659 mas, bmaj=1.991 mas, bpa=-2.837 degrees
! Estimated noise=0.382597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00139454 Jy
! Component: 100  -  total flux cleaned = -0.00167764 Jy
! Component: 150  -  total flux cleaned = -0.00212998 Jy
! Component: 200  -  total flux cleaned = -0.00242435 Jy
! Total flux subtracted in 200 components = -0.00242435 Jy
! Clean residual min=-0.004603 max=0.004456 Jy/beam
! Clean residual mean=0.000003 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 0.574495 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 87 components and 0.574495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083672Jy  sigma=1.336454
! Fit after  self-cal, rms=0.083666Jy  sigma=1.336335
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000398163 Jy
! Component: 100  -  total flux cleaned = -0.000618481 Jy
! Component: 150  -  total flux cleaned = -0.00082051 Jy
! Component: 200  -  total flux cleaned = -0.000916722 Jy
! Total flux subtracted in 200 components = -0.000916722 Jy
! Clean residual min=-0.004454 max=0.004410 Jy/beam
! Clean residual mean=0.000003 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.573578 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 95 components and 0.573578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083592Jy  sigma=1.335351
! Fit after  self-cal, rms=0.083590Jy  sigma=1.335286
! Inverting map 
! Added new window around map position (12.4, -24.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362968 Jy
! Component: 100  -  total flux cleaned = 0.00386343 Jy
! Component: 150  -  total flux cleaned = 0.00373012 Jy
! Component: 200  -  total flux cleaned = 0.00355107 Jy
! Total flux subtracted in 200 components = 0.00355107 Jy
! Clean residual min=-0.004923 max=0.003702 Jy/beam
! Clean residual mean=0.000004 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.57713 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 116 components and 0.577129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083381Jy  sigma=1.331461
! Fit after  self-cal, rms=0.083368Jy  sigma=1.331171
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083368Jy  sigma=1.331171
! Fit after  self-cal, rms=0.082843Jy  sigma=1.309795
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7659 mas, bmaj=1.991 mas, bpa=-2.899 degrees
! Estimated noise=0.382775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00238389 Jy
! Component: 100  -  total flux cleaned = -0.00283417 Jy
! Component: 150  -  total flux cleaned = -0.0032068 Jy
! Component: 200  -  total flux cleaned = -0.00335125 Jy
! Total flux subtracted in 200 components = -0.00335125 Jy
! Clean residual min=-0.002662 max=0.002521 Jy/beam
! Clean residual mean=0.000000 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.573778 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 134 components and 0.573778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082741Jy  sigma=1.307955
! Fit after  self-cal, rms=0.082745Jy  sigma=1.307778
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000323335 Jy
! Component: 100  -  total flux cleaned = -0.000408906 Jy
! Component: 150  -  total flux cleaned = -0.000488069 Jy
! Component: 200  -  total flux cleaned = -0.000599785 Jy
! Total flux subtracted in 200 components = -0.000599785 Jy
! Clean residual min=-0.002546 max=0.002374 Jy/beam
! Clean residual mean=0.000000 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.573179 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 138 components and 0.573179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082705Jy  sigma=1.306987
! Fit after  self-cal, rms=0.082701Jy  sigma=1.306945
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082701Jy  sigma=1.306945
! Fit after  self-cal, rms=0.082908Jy  sigma=1.306536
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=5.085 mas, bpa=4.92 degrees
! Estimated noise=0.512916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00188614 Jy
! Component: 100  -  total flux cleaned = -0.00217177 Jy
! Component: 150  -  total flux cleaned = -0.00233268 Jy
! Component: 200  -  total flux cleaned = -0.00228106 Jy
! Total flux subtracted in 200 components = -0.00228106 Jy
! Clean residual min=-0.002835 max=0.002423 Jy/beam
! Clean residual mean=0.000000 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.570898 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 146 components and 0.570898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082895Jy  sigma=1.306395
! Fit after  self-cal, rms=0.082893Jy  sigma=1.306248
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000147204 Jy
! Component: 100  -  total flux cleaned = -9.70483e-05 Jy
! Component: 150  -  total flux cleaned = -7.4002e-05 Jy
! Component: 200  -  total flux cleaned = -3.15761e-05 Jy
! Total flux subtracted in 200 components = -3.15761e-05 Jy
! Clean residual min=-0.002766 max=0.002448 Jy/beam
! Clean residual mean=0.000000 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.570866 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 146 components and 0.570866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082892Jy  sigma=1.306275
! Fit after  self-cal, rms=0.082891Jy  sigma=1.306255
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7658 mas, bmaj=1.99 mas, bpa=-2.916 degrees
! Estimated noise=0.382491 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7658 x 1.99 at -2.916 degrees (North through East)
! Clean map  min=-0.0025604  max=0.43782 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5862 mas, bmaj=1.606 mas, bpa=-3.544 degrees
! Estimated noise=0.607922 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.318355 Jy
! Component: 100  -  total flux cleaned = 0.406299 Jy
! Component: 150  -  total flux cleaned = 0.456431 Jy
! Component: 200  -  total flux cleaned = 0.487835 Jy
! Total flux subtracted in 200 components = 0.487835 Jy
! Clean residual min=-0.006699 max=0.016586 Jy/beam
! Clean residual mean=-0.000011 rms=0.001954 Jy/beam
! Combined flux in latest and established models = 0.487835 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.487835 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7658 mas, bmaj=1.99 mas, bpa=-2.916 degrees
! Estimated noise=0.382491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0341487 Jy
! Component: 100  -  total flux cleaned = 0.051643 Jy
! Component: 150  -  total flux cleaned = 0.0616189 Jy
! Component: 200  -  total flux cleaned = 0.0677186 Jy
! Total flux subtracted in 200 components = 0.0677186 Jy
! Clean residual min=-0.002972 max=0.003835 Jy/beam
! Clean residual mean=-0.000007 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.555553 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 66 components and 0.555553 Jy
! Inverting map 
! Added new window around map position (-9.2, 18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0042956 Jy
! Component: 100  -  total flux cleaned = 0.00732461 Jy
! Component: 150  -  total flux cleaned = 0.00955157 Jy
! Component: 200  -  total flux cleaned = 0.0112762 Jy
! Total flux subtracted in 200 components = 0.0112762 Jy
! Clean residual min=-0.002404 max=0.002352 Jy/beam
! Clean residual mean=-0.000002 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.56683 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 91 components and 0.56683 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=5.085 mas, bpa=4.92 degrees
! Estimated noise=0.512916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215818 Jy
! Component: 100  -  total flux cleaned = 0.0028166 Jy
! Component: 150  -  total flux cleaned = 0.00314099 Jy
! Component: 200  -  total flux cleaned = 0.00326599 Jy
! Total flux subtracted in 200 components = 0.00326599 Jy
! Clean residual min=-0.002955 max=0.002404 Jy/beam
! Clean residual mean=-0.000001 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.570096 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114161 Jy
! Component: 100  -  total flux cleaned = 0.00021992 Jy
! Component: 150  -  total flux cleaned = 0.000317519 Jy
! Component: 200  -  total flux cleaned = 0.000408787 Jy
! Total flux subtracted in 200 components = 0.000408787 Jy
! Clean residual min=-0.002870 max=0.002369 Jy/beam
! Clean residual mean=-0.000001 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.570504 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 118 components and 0.570504 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7658 mas, bmaj=1.99 mas, bpa=-2.916 degrees
! Estimated noise=0.382491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110517 Jy
! Component: 100  -  total flux cleaned = 2.38601e-05 Jy
! Component: 150  -  total flux cleaned = 0.000104448 Jy
! Component: 200  -  total flux cleaned = 0.000142859 Jy
! Total flux subtracted in 200 components = 0.000142859 Jy
! Clean residual min=-0.002255 max=0.002221 Jy/beam
! Clean residual mean=-0.000000 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.570647 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 135 components and 0.570647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082846Jy  sigma=1.304993
! Fit after  self-cal, rms=0.082817Jy  sigma=1.304473
wmodel /J2138-2439_X_map.mod
! wmodel: Unable to open new model file: /J2138-2439_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2138-2439_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7658 x 1.99 at -2.916 degrees (North through East)
! Clean map  min=-0.0020646  max=0.43729 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2138-2439_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.437288 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000526566 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.361249 0.361249 0.722499 1.445 2.89 5.77999 11.56 23.12 46.2399 92.4799
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.437 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  830.451 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2138-2439_X_dfm.log closed on Thu May 19 23:36:55 2016