! Started logfile: /scr/pima/bg219i_uvs/J2138-1810_S_uvs.log on Wed Apr  6 23:15:03 2016
obs /scr/pima/bg219i_uvs/J2138-1810_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2138-1810_S_uva.fits
! AN table 1: 61 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.6398 visibilities/baseline/integration-bin.
! Found source: J2138-1810
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5620 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J2138-1810_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 129 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.082878Jy  sigma=20.294868
! Fit after  self-cal, rms=0.811950Jy  sigma=15.537819
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.354 mas, bmaj=15.51 mas, bpa=-3.544 degrees
! Estimated noise=0.843062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137432 Jy
! Component: 100  -  total flux cleaned = 0.20282 Jy
! Total flux subtracted in 100 components = 0.20282 Jy
! Clean residual min=-0.034166 max=0.058037 Jy/beam
! Clean residual mean=-0.000149 rms=0.012706 Jy/beam
! Combined flux in latest and established models = 0.20282 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.20282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.261009Jy  sigma=4.362059
! Fit after  self-cal, rms=0.260357Jy  sigma=4.349618
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.307 mas, bmaj=17.54 mas, bpa=-2.536 degrees
! Estimated noise=0.54019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.092372 Jy
! Component: 100  -  total flux cleaned = 0.149568 Jy
! Component: 150  -  total flux cleaned = 0.189539 Jy
! Component: 200  -  total flux cleaned = 0.218254 Jy
! Total flux subtracted in 200 components = 0.218254 Jy
! Clean residual min=-0.055835 max=0.083495 Jy/beam
! Clean residual mean=-0.000312 rms=0.020370 Jy/beam
! Combined flux in latest and established models = 0.421074 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 100 components and 0.421074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212122Jy  sigma=3.605325
! Fit after  self-cal, rms=0.210357Jy  sigma=3.573052
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.307 x 17.54 at -2.536 degrees (North through East)
! Clean map  min=-0.056548  max=0.19891 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.210357Jy  sigma=3.573052
! Fit after  self-cal, rms=0.210357Jy  sigma=3.573052
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.307 mas, bmaj=17.54 mas, bpa=-2.536 degrees
! Estimated noise=0.54019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0265119 Jy
! Component: 100  -  total flux cleaned = 0.0431659 Jy
! Component: 150  -  total flux cleaned = 0.0531267 Jy
! Component: 200  -  total flux cleaned = 0.0564473 Jy
! Total flux subtracted in 200 components = 0.0564473 Jy
! Clean residual min=-0.055033 max=0.082041 Jy/beam
! Clean residual mean=-0.000292 rms=0.019555 Jy/beam
! Combined flux in latest and established models = 0.477521 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 111 components and 0.477521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.204540Jy  sigma=3.513435
! Fit after  self-cal, rms=0.203911Jy  sigma=3.502765
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203911Jy  sigma=3.502765
! Fit after  self-cal, rms=0.203911Jy  sigma=3.502765
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.307 mas, bmaj=17.54 mas, bpa=-2.536 degrees
! Estimated noise=0.54019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00412496 Jy
! Component: 100  -  total flux cleaned = 0.00694018 Jy
! Component: 150  -  total flux cleaned = 0.0100967 Jy
! Component: 200  -  total flux cleaned = 0.0122992 Jy
! Total flux subtracted in 200 components = 0.0122992 Jy
! Clean residual min=-0.053789 max=0.080557 Jy/beam
! Clean residual mean=-0.000288 rms=0.019282 Jy/beam
! Combined flux in latest and established models = 0.489821 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 119 components and 0.489821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202093Jy  sigma=3.475095
! Fit after  self-cal, rms=0.201693Jy  sigma=3.468713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201327 Jy
! Component: 100  -  total flux cleaned = 0.0036071 Jy
! Component: 150  -  total flux cleaned = 0.00503318 Jy
! Component: 200  -  total flux cleaned = 0.00636638 Jy
! Total flux subtracted in 200 components = 0.00636638 Jy
! Clean residual min=-0.053225 max=0.080185 Jy/beam
! Clean residual mean=-0.000283 rms=0.019116 Jy/beam
! Combined flux in latest and established models = 0.496187 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 123 components and 0.496187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200635Jy  sigma=3.450831
! Fit after  self-cal, rms=0.200393Jy  sigma=3.447625
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200393Jy  sigma=3.447625
! Fit after  self-cal, rms=0.200393Jy  sigma=3.447625
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.307 mas, bmaj=17.54 mas, bpa=-2.536 degrees
! Estimated noise=0.54019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177904 Jy
! Component: 100  -  total flux cleaned = 0.00258477 Jy
! Component: 150  -  total flux cleaned = 0.00382647 Jy
! Component: 200  -  total flux cleaned = 0.00475611 Jy
! Total flux subtracted in 200 components = 0.00475611 Jy
! Clean residual min=-0.052842 max=0.079769 Jy/beam
! Clean residual mean=-0.000279 rms=0.018999 Jy/beam
! Combined flux in latest and established models = 0.500943 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 133 components and 0.500943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199651Jy  sigma=3.434911
! Fit after  self-cal, rms=0.199490Jy  sigma=3.432997
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119304 Jy
! Component: 100  -  total flux cleaned = 0.00168708 Jy
! Component: 150  -  total flux cleaned = 0.00212736 Jy
! Component: 200  -  total flux cleaned = 0.00254037 Jy
! Total flux subtracted in 200 components = 0.00254037 Jy
! Clean residual min=-0.052535 max=0.079405 Jy/beam
! Clean residual mean=-0.000279 rms=0.018913 Jy/beam
! Combined flux in latest and established models = 0.503484 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 139 components and 0.503484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198969Jy  sigma=3.422841
! Fit after  self-cal, rms=0.198864Jy  sigma=3.421663
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198864Jy  sigma=3.421663
! Fit after  self-cal, rms=0.198864Jy  sigma=3.421663
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.823 mas, bmaj=18.59 mas, bpa=2.705 degrees
! Estimated noise=0.575928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0188292 Jy
! Component: 100  -  total flux cleaned = 0.0242625 Jy
! Component: 150  -  total flux cleaned = 0.0276617 Jy
! Component: 200  -  total flux cleaned = 0.0307367 Jy
! Total flux subtracted in 200 components = 0.0307367 Jy
! Clean residual min=-0.064523 max=0.101089 Jy/beam
! Clean residual mean=-0.000368 rms=0.023785 Jy/beam
! Combined flux in latest and established models = 0.53422 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 152 components and 0.53422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198399Jy  sigma=3.433430
! Fit after  self-cal, rms=0.198219Jy  sigma=3.431183
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15.5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.098167 Jy
! Component: 100  -  total flux cleaned = 0.145309 Jy
! Component: 150  -  total flux cleaned = 0.174401 Jy
! Component: 200  -  total flux cleaned = 0.200737 Jy
! Total flux subtracted in 200 components = 0.200737 Jy
! Clean residual min=-0.043672 max=0.064951 Jy/beam
! Clean residual mean=-0.000165 rms=0.015887 Jy/beam
! Combined flux in latest and established models = 0.734958 Jy
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 239 components and 0.734958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146611Jy  sigma=2.532375
! Fit after  self-cal, rms=0.138901Jy  sigma=2.362696
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.307 mas, bmaj=17.54 mas, bpa=-2.536 degrees
! Estimated noise=0.54019 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.307 x 17.54 at -2.536 degrees (North through East)
! Clean map  min=-0.038512  max=0.19182 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.354 mas, bmaj=15.51 mas, bpa=-3.544 degrees
! Estimated noise=0.843062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139688 Jy
! Component: 100  -  total flux cleaned = 0.212499 Jy
! Component: 150  -  total flux cleaned = 0.269054 Jy
! Component: 200  -  total flux cleaned = 0.316963 Jy
! Total flux subtracted in 200 components = 0.316963 Jy
! Clean residual min=-0.029555 max=0.036109 Jy/beam
! Clean residual mean=-0.000143 rms=0.009997 Jy/beam
! Combined flux in latest and established models = 0.316963 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 83 model components to the UV plane model.
! The established model now contains 83 components and 0.316963 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.307 mas, bmaj=17.54 mas, bpa=-2.536 degrees
! Estimated noise=0.54019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0860016 Jy
! Component: 100  -  total flux cleaned = 0.152569 Jy
! Component: 150  -  total flux cleaned = 0.207447 Jy
! Component: 200  -  total flux cleaned = 0.253302 Jy
! Total flux subtracted in 200 components = 0.253302 Jy
! Clean residual min=-0.040126 max=0.043692 Jy/beam
! Clean residual mean=-0.000222 rms=0.013972 Jy/beam
! Combined flux in latest and established models = 0.570265 Jy
! Adding 120 model components to the UV plane model.
! The established model now contains 191 components and 0.570265 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.823 mas, bmaj=18.59 mas, bpa=2.705 degrees
! Estimated noise=0.575928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525827 Jy
! Component: 100  -  total flux cleaned = 0.0945414 Jy
! Component: 150  -  total flux cleaned = 0.12955 Jy
! Component: 200  -  total flux cleaned = 0.159457 Jy
! Total flux subtracted in 200 components = 0.159457 Jy
! Clean residual min=-0.039357 max=0.043530 Jy/beam
! Clean residual mean=-0.000157 rms=0.013850 Jy/beam
! Combined flux in latest and established models = 0.729721 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0258469 Jy
! Component: 100  -  total flux cleaned = 0.0483855 Jy
! Component: 150  -  total flux cleaned = 0.068341 Jy
! Component: 200  -  total flux cleaned = 0.0861499 Jy
! Total flux subtracted in 200 components = 0.0861499 Jy
! Clean residual min=-0.035622 max=0.039236 Jy/beam
! Clean residual mean=-0.000083 rms=0.012080 Jy/beam
! Combined flux in latest and established models = 0.815871 Jy
! Adding 169 model components to the UV plane model.
! The established model now contains 343 components and 0.815871 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.307 mas, bmaj=17.54 mas, bpa=-2.536 degrees
! Estimated noise=0.54019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131404 Jy
! Component: 100  -  total flux cleaned = 0.0233297 Jy
! Component: 150  -  total flux cleaned = 0.0328812 Jy
! Component: 200  -  total flux cleaned = 0.041573 Jy
! Total flux subtracted in 200 components = 0.041573 Jy
! Clean residual min=-0.028064 max=0.029570 Jy/beam
! Clean residual mean=-0.000032 rms=0.008835 Jy/beam
! Combined flux in latest and established models = 0.857444 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 401 components and 0.857444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112165Jy  sigma=1.939478
! Fit after  self-cal, rms=0.107856Jy  sigma=1.845999
wmodel /scr/pima/bg219i_uvs/J2138-1810_S_map.mod
! Writing 401 model components to file: /scr/pima/bg219i_uvs/J2138-1810_S_map.mod
wobs /scr/pima/bg219i_uvs/J2138-1810_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J2138-1810_S_uvs.fits
wwins /scr/pima/bg219i_uvs/J2138-1810_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219i_uvs/J2138-1810_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00525733 Jy
! Component: 100  -  total flux cleaned = -0.00491857 Jy
! Component: 150  -  total flux cleaned = -0.00177908 Jy
! Component: 200  -  total flux cleaned = -0.00243389 Jy
! Component: 250  -  total flux cleaned = -0.00212478 Jy
! Component: 300  -  total flux cleaned = -0.00183807 Jy
! Component: 350  -  total flux cleaned = -0.0024133 Jy
! Component: 400  -  total flux cleaned = -0.00268662 Jy
! Component: 450  -  total flux cleaned = -0.0029413 Jy
! Component: 500  -  total flux cleaned = -0.00267832 Jy
! Component: 550  -  total flux cleaned = -0.00266831 Jy
! Component: 600  -  total flux cleaned = -0.00242409 Jy
! Component: 650  -  total flux cleaned = -0.00195862 Jy
! Component: 700  -  total flux cleaned = -0.00196009 Jy
! Component: 750  -  total flux cleaned = -0.00152751 Jy
! Component: 800  -  total flux cleaned = -0.00111141 Jy
! Component: 850  -  total flux cleaned = -0.000905552 Jy
! Component: 900  -  total flux cleaned = -0.000303153 Jy
! Component: 950  -  total flux cleaned = -0.000109298 Jy
! Component: 1000  -  total flux cleaned = 7.82294e-05 Jy
! Component: 1050  -  total flux cleaned = 0.000634379 Jy
! Component: 1100  -  total flux cleaned = 0.000636446 Jy
! Component: 1150  -  total flux cleaned = 0.00151594 Jy
! Component: 1200  -  total flux cleaned = 0.00185567 Jy
! Component: 1250  -  total flux cleaned = 0.0023558 Jy
! Component: 1300  -  total flux cleaned = 0.00236251 Jy
! Component: 1350  -  total flux cleaned = 0.00332244 Jy
! Component: 1400  -  total flux cleaned = 0.00363261 Jy
! Component: 1450  -  total flux cleaned = 0.00423821 Jy
! Component: 1500  -  total flux cleaned = 0.00527037 Jy
! Component: 1550  -  total flux cleaned = 0.00541636 Jy
! Component: 1600  -  total flux cleaned = 0.00583898 Jy
! Component: 1650  -  total flux cleaned = 0.00570065 Jy
! Component: 1700  -  total flux cleaned = 0.00624478 Jy
! Component: 1750  -  total flux cleaned = 0.00611092 Jy
! Component: 1800  -  total flux cleaned = 0.00636855 Jy
! Component: 1850  -  total flux cleaned = 0.00623637 Jy
! Component: 1900  -  total flux cleaned = 0.00611289 Jy
! Component: 1950  -  total flux cleaned = 0.0062352 Jy
! Component: 2000  -  total flux cleaned = 0.00635578 Jy
! Component: 2050  -  total flux cleaned = 0.00624067 Jy
! Component: 2100  -  total flux cleaned = 0.00623885 Jy
! Component: 2150  -  total flux cleaned = 0.00589692 Jy
! Component: 2200  -  total flux cleaned = 0.00567423 Jy
! Component: 2250  -  total flux cleaned = 0.00556773 Jy
! Component: 2300  -  total flux cleaned = 0.00545928 Jy
! Component: 2350  -  total flux cleaned = 0.0053539 Jy
! Component: 2400  -  total flux cleaned = 0.00535084 Jy
! Component: 2450  -  total flux cleaned = 0.00504554 Jy
! Component: 2500  -  total flux cleaned = 0.00494502 Jy
! Component: 2550  -  total flux cleaned = 0.00554197 Jy
! Component: 2600  -  total flux cleaned = 0.00563925 Jy
! Component: 2650  -  total flux cleaned = 0.00602349 Jy
! Component: 2700  -  total flux cleaned = 0.00592737 Jy
! Component: 2750  -  total flux cleaned = 0.00630109 Jy
! Component: 2800  -  total flux cleaned = 0.00666929 Jy
! Component: 2850  -  total flux cleaned = 0.0073957 Jy
! Component: 2900  -  total flux cleaned = 0.00775321 Jy
! Component: 2950  -  total flux cleaned = 0.00793049 Jy
! Component: 3000  -  total flux cleaned = 0.00845418 Jy
! Component: 3050  -  total flux cleaned = 0.00888459 Jy
! Component: 3100  -  total flux cleaned = 0.00939369 Jy
! Component: 3150  -  total flux cleaned = 0.00998037 Jy
! Component: 3200  -  total flux cleaned = 0.0101466 Jy
! Component: 3250  -  total flux cleaned = 0.0107205 Jy
! Component: 3300  -  total flux cleaned = 0.0112057 Jy
! Component: 3350  -  total flux cleaned = 0.0118455 Jy
! Component: 3400  -  total flux cleaned = 0.0120037 Jy
! Component: 3450  -  total flux cleaned = 0.012318 Jy
! Component: 3500  -  total flux cleaned = 0.0128613 Jy
! Component: 3550  -  total flux cleaned = 0.0130154 Jy
! Component: 3600  -  total flux cleaned = 0.0135495 Jy
! Component: 3650  -  total flux cleaned = 0.0141527 Jy
! Component: 3700  -  total flux cleaned = 0.014451 Jy
! Component: 3750  -  total flux cleaned = 0.0150429 Jy
! Component: 3800  -  total flux cleaned = 0.015557 Jy
! Component: 3850  -  total flux cleaned = 0.0161389 Jy
! Component: 3900  -  total flux cleaned = 0.0165719 Jy
! Component: 3950  -  total flux cleaned = 0.0171452 Jy
! Component: 4000  -  total flux cleaned = 0.0176418 Jy
! Component: 4050  -  total flux cleaned = 0.018065 Jy
! Total flux subtracted in 4096 components = 0.0187645 Jy
! Clean residual min=-0.003919 max=0.003691 Jy/beam
! Clean residual mean=-0.000023 rms=0.001835 Jy/beam
! Combined flux in latest and established models = 0.876208 Jy
keep
! Adding 796 model components to the UV plane model.
! The established model now contains 1191 components and 0.876209 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J2138-1810_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.307 x 17.54 at -2.536 degrees (North through East)
! Clean map  min=-0.023514  max=0.2105 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2138-1810_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.210503 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00170837 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.4347 2.4347 4.86941 9.73882 19.4776 38.9553 77.9105
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0051 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.21 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  123.218 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2138-1810_S_uvs.log closed on Wed Apr  6 23:15:08 2016