! Started logfile: /scr/pima/bg219i_uvs/J2134-4218_S_dfm.log on Thu May 19 23:36:17 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J2134-4218_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2134-4218_S_uva.fits
! AN table 1: 30 integrations on 21 of 21 possible baselines.
! AN table 2: 30 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.928571 visibilities/baseline/integration-bin.
! Found source: J2134-4218
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4680 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2134-4218_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.038293Jy  sigma=15.567962
! Fit after  self-cal, rms=0.723852Jy  sigma=10.700823
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=8.759 mas, bpa=-21.1 degrees
! Estimated noise=1.00075 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.199672 Jy
! Component: 100  -  total flux cleaned = 0.256869 Jy
! Total flux subtracted in 100 components = 0.256869 Jy
! Clean residual min=-0.019082 max=0.041341 Jy/beam
! Clean residual mean=-0.000254 rms=0.006166 Jy/beam
! Combined flux in latest and established models = 0.256869 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.256869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138992Jy  sigma=2.027964
! Fit after  self-cal, rms=0.138961Jy  sigma=2.027581
! Inverting map 
! Added new window around map position (-4, -20).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0396167 Jy
! Component: 100  -  total flux cleaned = 0.0666438 Jy
! Total flux subtracted in 100 components = 0.0666438 Jy
! Clean residual min=-0.012996 max=0.025811 Jy/beam
! Clean residual mean=-0.000154 rms=0.004208 Jy/beam
! Combined flux in latest and established models = 0.323513 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.323513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115413Jy  sigma=1.655598
! Fit after  self-cal, rms=0.114718Jy  sigma=1.646354
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.206 mas, bmaj=10.82 mas, bpa=-19.03 degrees
! Estimated noise=0.727875 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0422009 Jy
! Component: 100  -  total flux cleaned = 0.0682261 Jy
! Component: 150  -  total flux cleaned = 0.0844091 Jy
! Component: 200  -  total flux cleaned = 0.0945339 Jy
! Total flux subtracted in 200 components = 0.0945339 Jy
! Clean residual min=-0.010274 max=0.015833 Jy/beam
! Clean residual mean=-0.000049 rms=0.003036 Jy/beam
! Combined flux in latest and established models = 0.418047 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 0.418047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097123Jy  sigma=1.364762
! Fit after  self-cal, rms=0.096626Jy  sigma=1.358743
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.206 x 10.82 at -19.03 degrees (North through East)
! Clean map  min=-0.0094297  max=0.2187 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     KP        0.89     LA        0.95     MK        1.13     
!   NL        1.14     PT        0.95     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.94     LA        0.99     MK        1.06     
!   NL        1.16     PT        0.96     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.95     LA        0.96     MK        1.03     
!   NL        1.05     PT        0.98     SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.96     LA        0.96     MK        1.06     
!   NL        1.13     PT        1.00     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.096626Jy  sigma=1.358743
! Fit after  self-cal, rms=0.095214Jy  sigma=1.339292
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.219 mas, bmaj=10.65 mas, bpa=-18.46 degrees
! Estimated noise=0.720507 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210616 Jy
! Component: 100  -  total flux cleaned = 0.00193646 Jy
! Component: 150  -  total flux cleaned = 0.00215643 Jy
! Component: 200  -  total flux cleaned = 0.00237364 Jy
! Total flux subtracted in 200 components = 0.00237364 Jy
! Clean residual min=-0.008508 max=0.011251 Jy/beam
! Clean residual mean=-0.000028 rms=0.002303 Jy/beam
! Combined flux in latest and established models = 0.42042 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 48 components and 0.42042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094709Jy  sigma=1.334590
! Fit after  self-cal, rms=0.094711Jy  sigma=1.333985
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094711Jy  sigma=1.333985
! Fit after  self-cal, rms=0.094368Jy  sigma=1.333561
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.22 mas, bmaj=10.58 mas, bpa=-18.24 degrees
! Estimated noise=0.718745 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160215 Jy
! Component: 100  -  total flux cleaned = 0.00180469 Jy
! Component: 150  -  total flux cleaned = 0.00190752 Jy
! Component: 200  -  total flux cleaned = 0.00209865 Jy
! Total flux subtracted in 200 components = 0.00209865 Jy
! Clean residual min=-0.008495 max=0.010726 Jy/beam
! Clean residual mean=-0.000020 rms=0.002215 Jy/beam
! Combined flux in latest and established models = 0.422519 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 59 components and 0.422519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094078Jy  sigma=1.330730
! Fit after  self-cal, rms=0.094074Jy  sigma=1.330473
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-32.5, 114.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00706394 Jy
! Component: 100  -  total flux cleaned = 0.00777038 Jy
! Component: 150  -  total flux cleaned = 0.00728192 Jy
! Component: 200  -  total flux cleaned = 0.00615659 Jy
! Total flux subtracted in 200 components = 0.00615659 Jy
! Clean residual min=-0.007051 max=0.007449 Jy/beam
! Clean residual mean=-0.000002 rms=0.001845 Jy/beam
! Combined flux in latest and established models = 0.428676 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 90 components and 0.428676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092572Jy  sigma=1.315972
! Fit after  self-cal, rms=0.092501Jy  sigma=1.315027
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092501Jy  sigma=1.315027
! Fit after  self-cal, rms=0.093099Jy  sigma=1.308556
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.226 mas, bmaj=10.52 mas, bpa=-18.12 degrees
! Estimated noise=0.720098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00143367 Jy
! Component: 100  -  total flux cleaned = -0.00220692 Jy
! Component: 150  -  total flux cleaned = -0.00263231 Jy
! Component: 200  -  total flux cleaned = -0.00302207 Jy
! Total flux subtracted in 200 components = -0.00302207 Jy
! Clean residual min=-0.006477 max=0.005181 Jy/beam
! Clean residual mean=-0.000000 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.425654 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 98 components and 0.425653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092891Jy  sigma=1.306273
! Fit after  self-cal, rms=0.092891Jy  sigma=1.306155
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000743809 Jy
! Component: 100  -  total flux cleaned = -0.0010204 Jy
! Component: 150  -  total flux cleaned = -0.00121364 Jy
! Component: 200  -  total flux cleaned = -0.00139309 Jy
! Total flux subtracted in 200 components = -0.00139309 Jy
! Clean residual min=-0.006248 max=0.004918 Jy/beam
! Clean residual mean=-0.000007 rms=0.001459 Jy/beam
! Combined flux in latest and established models = 0.42426 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 105 components and 0.42426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092788Jy  sigma=1.305067
! Fit after  self-cal, rms=0.092786Jy  sigma=1.305019
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092786Jy  sigma=1.305019
! Fit after  self-cal, rms=0.093355Jy  sigma=1.301717
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.106 mas, bmaj=35.64 mas, bpa=-8.016 degrees
! Estimated noise=0.942502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00166303 Jy
! Component: 100  -  total flux cleaned = -0.00197898 Jy
! Component: 150  -  total flux cleaned = -0.00224563 Jy
! Component: 200  -  total flux cleaned = -0.00247059 Jy
! Total flux subtracted in 200 components = -0.00247059 Jy
! Clean residual min=-0.005723 max=0.005865 Jy/beam
! Clean residual mean=0.000000 rms=0.001772 Jy/beam
! Combined flux in latest and established models = 0.42179 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 117 components and 0.42179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093310Jy  sigma=1.301142
! Fit after  self-cal, rms=0.093309Jy  sigma=1.301025
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000244071 Jy
! Component: 100  -  total flux cleaned = -0.000414948 Jy
! Component: 150  -  total flux cleaned = -0.000454023 Jy
! Component: 200  -  total flux cleaned = -0.000454614 Jy
! Total flux subtracted in 200 components = -0.000454614 Jy
! Clean residual min=-0.005602 max=0.005821 Jy/beam
! Clean residual mean=-0.000003 rms=0.001751 Jy/beam
! Combined flux in latest and established models = 0.421335 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 130 components and 0.421335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093292Jy  sigma=1.300953
! Fit after  self-cal, rms=0.093287Jy  sigma=1.300915
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.23 mas, bmaj=10.49 mas, bpa=-18.03 degrees
! Estimated noise=0.721089 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.23 x 10.49 at -18.03 degrees (North through East)
! Clean map  min=-0.0063956  max=0.2112 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.551 mas, bmaj=8.422 mas, bpa=-20.1 degrees
! Estimated noise=0.999257 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.198795 Jy
! Component: 100  -  total flux cleaned = 0.259235 Jy
! Component: 150  -  total flux cleaned = 0.294536 Jy
! Component: 200  -  total flux cleaned = 0.320484 Jy
! Total flux subtracted in 200 components = 0.320484 Jy
! Clean residual min=-0.010178 max=0.018105 Jy/beam
! Clean residual mean=-0.000145 rms=0.003546 Jy/beam
! Combined flux in latest and established models = 0.320484 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.320484 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.23 mas, bmaj=10.49 mas, bpa=-18.03 degrees
! Estimated noise=0.721089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0394248 Jy
! Component: 100  -  total flux cleaned = 0.0635252 Jy
! Component: 150  -  total flux cleaned = 0.0790629 Jy
! Component: 200  -  total flux cleaned = 0.0885388 Jy
! Total flux subtracted in 200 components = 0.0885388 Jy
! Clean residual min=-0.008486 max=0.009391 Jy/beam
! Clean residual mean=-0.000042 rms=0.002153 Jy/beam
! Combined flux in latest and established models = 0.409023 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 64 components and 0.409023 Jy
! Inverting map 
! Added new window around map position (6, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00671346 Jy
! Component: 100  -  total flux cleaned = 0.00951104 Jy
! Component: 150  -  total flux cleaned = 0.0113369 Jy
! Component: 200  -  total flux cleaned = 0.0128142 Jy
! Total flux subtracted in 200 components = 0.0128142 Jy
! Clean residual min=-0.006568 max=0.006272 Jy/beam
! Clean residual mean=0.000008 rms=0.001575 Jy/beam
! Combined flux in latest and established models = 0.421837 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 94 components and 0.421837 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.106 mas, bmaj=35.64 mas, bpa=-8.016 degrees
! Estimated noise=0.942502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141905 Jy
! Component: 100  -  total flux cleaned = 0.00154319 Jy
! Component: 150  -  total flux cleaned = 0.00142706 Jy
! Component: 200  -  total flux cleaned = 0.00132632 Jy
! Total flux subtracted in 200 components = 0.00132632 Jy
! Clean residual min=-0.006973 max=0.006031 Jy/beam
! Clean residual mean=0.000016 rms=0.001997 Jy/beam
! Combined flux in latest and established models = 0.423164 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.88926e-06 Jy
! Component: 100  -  total flux cleaned = -7.67175e-05 Jy
! Component: 150  -  total flux cleaned = -7.14737e-05 Jy
! Component: 200  -  total flux cleaned = -6.87652e-05 Jy
! Total flux subtracted in 200 components = -6.87652e-05 Jy
! Clean residual min=-0.006304 max=0.005451 Jy/beam
! Clean residual mean=0.000016 rms=0.001889 Jy/beam
! Combined flux in latest and established models = 0.423095 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 128 components and 0.423095 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.23 mas, bmaj=10.49 mas, bpa=-18.03 degrees
! Estimated noise=0.721089 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000584004 Jy
! Component: 100  -  total flux cleaned = 0.000293202 Jy
! Component: 150  -  total flux cleaned = 0.000211555 Jy
! Component: 200  -  total flux cleaned = 2.4329e-06 Jy
! Total flux subtracted in 200 components = 2.4329e-06 Jy
! Clean residual min=-0.004973 max=0.004662 Jy/beam
! Clean residual mean=0.000012 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 0.423097 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 146 components and 0.423097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093234Jy  sigma=1.299636
! Fit after  self-cal, rms=0.093221Jy  sigma=1.299102
wmodel /J2134-4218_S_map.mod
! wmodel: Unable to open new model file: /J2134-4218_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2134-4218_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.23 x 10.49 at -18.03 degrees (North through East)
! Clean map  min=-0.0056827  max=0.21405 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2134-4218_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.214054 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00130025 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.82233 1.82233 3.64465 7.2893 14.5786 29.1572 58.3144
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0039 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.214 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  164.624 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2134-4218_S_dfm.log closed on Thu May 19 23:36:19 2016