! Started logfile: /scr/pima/bg219i_uvs/J2129-1538_X_dfm.log on Thu May 19 23:36:10 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2129-1538_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2129-1538_X_uva.fits
! AN table 1: 122 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.842805 visibilities/baseline/integration-bin.
! Found source: J2129-1538
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 55524 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2129-1538_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 167 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.622715Jy  sigma=25.091556
! Fit after  self-cal, rms=0.442533Jy  sigma=7.229862
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5726 mas, bmaj=1.543 mas, bpa=-4.9 degrees
! Estimated noise=0.405274 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.810587 Jy
! Component: 100  -  total flux cleaned = 1.12958 Jy
! Total flux subtracted in 100 components = 1.12958 Jy
! Clean residual min=-0.049424 max=0.141354 Jy/beam
! Clean residual mean=-0.000007 rms=0.008519 Jy/beam
! Combined flux in latest and established models = 1.12958 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.12958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.309655Jy  sigma=4.681145
! Fit after  self-cal, rms=0.308983Jy  sigma=4.672269
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.157484 Jy
! Component: 100  -  total flux cleaned = 0.24249 Jy
! Total flux subtracted in 100 components = 0.24249 Jy
! Clean residual min=-0.020432 max=0.042675 Jy/beam
! Clean residual mean=0.000003 rms=0.003564 Jy/beam
! Combined flux in latest and established models = 1.37207 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 1.37207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.148830Jy  sigma=2.245362
! Fit after  self-cal, rms=0.147593Jy  sigma=2.226390
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0515274 Jy
! Component: 100  -  total flux cleaned = 0.0843189 Jy
! Total flux subtracted in 100 components = 0.0843189 Jy
! Clean residual min=-0.013618 max=0.017858 Jy/beam
! Clean residual mean=0.000006 rms=0.002299 Jy/beam
! Combined flux in latest and established models = 1.45639 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 1.45639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110949Jy  sigma=1.643330
! Fit after  self-cal, rms=0.110779Jy  sigma=1.641155
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225398 Jy
! Component: 100  -  total flux cleaned = 0.0377435 Jy
! Total flux subtracted in 100 components = 0.0377435 Jy
! Clean residual min=-0.010673 max=0.010736 Jy/beam
! Clean residual mean=0.000008 rms=0.001972 Jy/beam
! Combined flux in latest and established models = 1.49413 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 1.49413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101735Jy  sigma=1.482978
! Fit after  self-cal, rms=0.101696Jy  sigma=1.482572
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7418 mas, bmaj=1.853 mas, bpa=-4.625 degrees
! Estimated noise=0.207688 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192242 Jy
! Component: 100  -  total flux cleaned = 0.0287761 Jy
! Component: 150  -  total flux cleaned = 0.0337684 Jy
! Component: 200  -  total flux cleaned = 0.0364113 Jy
! Total flux subtracted in 200 components = 0.0364113 Jy
! Clean residual min=-0.010408 max=0.013692 Jy/beam
! Clean residual mean=0.000001 rms=0.002354 Jy/beam
! Combined flux in latest and established models = 1.53054 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 28 components and 1.53054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098688Jy  sigma=1.413057
! Fit after  self-cal, rms=0.098667Jy  sigma=1.412831
! Inverting map 
! Added new window around map position (-3.6, 8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135713 Jy
! Component: 100  -  total flux cleaned = 0.0210499 Jy
! Component: 150  -  total flux cleaned = 0.0236228 Jy
! Component: 200  -  total flux cleaned = 0.0237787 Jy
! Total flux subtracted in 200 components = 0.0237787 Jy
! Clean residual min=-0.009398 max=0.010981 Jy/beam
! Clean residual mean=0.000002 rms=0.002116 Jy/beam
! Combined flux in latest and established models = 1.55432 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 58 components and 1.55432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096396Jy  sigma=1.382780
! Fit after  self-cal, rms=0.096221Jy  sigma=1.378930
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7418 x 1.853 at -4.625 degrees (North through East)
! Clean map  min=-0.0085285  max=1.1327 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.00     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.01     KP        0.98     
!   LA        0.99     MK        0.99     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.96     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.01     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.01     KP        1.00     
!   LA        1.00     MK        1.00     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.00     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.00     KP        1.00     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.00     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.00     OV        0.97     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.01     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.02     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.01     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.01     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.096221Jy  sigma=1.378930
! Fit after  self-cal, rms=0.091786Jy  sigma=1.306268
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7423 mas, bmaj=1.85 mas, bpa=-4.533 degrees
! Estimated noise=0.207819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00574944 Jy
! Component: 100  -  total flux cleaned = -0.00925518 Jy
! Component: 150  -  total flux cleaned = -0.0118575 Jy
! Component: 200  -  total flux cleaned = -0.0132434 Jy
! Total flux subtracted in 200 components = -0.0132434 Jy
! Clean residual min=-0.006243 max=0.007245 Jy/beam
! Clean residual mean=-0.000001 rms=0.001740 Jy/beam
! Combined flux in latest and established models = 1.54108 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 1.54108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091318Jy  sigma=1.299947
! Fit after  self-cal, rms=0.091295Jy  sigma=1.299460
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091295Jy  sigma=1.299460
! Fit after  self-cal, rms=0.085938Jy  sigma=1.227743
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7419 mas, bmaj=1.851 mas, bpa=-4.581 degrees
! Estimated noise=0.207583 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00369064 Jy
! Component: 100  -  total flux cleaned = -0.00444634 Jy
! Component: 150  -  total flux cleaned = -0.00481045 Jy
! Component: 200  -  total flux cleaned = -0.00493839 Jy
! Total flux subtracted in 200 components = -0.00493839 Jy
! Clean residual min=-0.004743 max=0.006255 Jy/beam
! Clean residual mean=-0.000006 rms=0.001418 Jy/beam
! Combined flux in latest and established models = 1.53614 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 85 components and 1.53614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085710Jy  sigma=1.224555
! Fit after  self-cal, rms=0.085700Jy  sigma=1.224348
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (26, -46.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00618521 Jy
! Component: 100  -  total flux cleaned = 0.00925676 Jy
! Component: 150  -  total flux cleaned = 0.0101939 Jy
! Component: 200  -  total flux cleaned = 0.010447 Jy
! Total flux subtracted in 200 components = 0.010447 Jy
! Clean residual min=-0.004685 max=0.005678 Jy/beam
! Clean residual mean=-0.000004 rms=0.001348 Jy/beam
! Combined flux in latest and established models = 1.54659 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 121 components and 1.54659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085111Jy  sigma=1.217430
! Fit after  self-cal, rms=0.085058Jy  sigma=1.216452
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085058Jy  sigma=1.216452
! Fit after  self-cal, rms=0.078839Jy  sigma=1.134157
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7415 mas, bmaj=1.852 mas, bpa=-4.599 degrees
! Estimated noise=0.207736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00175133 Jy
! Component: 100  -  total flux cleaned = -0.00249345 Jy
! Component: 150  -  total flux cleaned = -0.0028855 Jy
! Component: 200  -  total flux cleaned = -0.00315882 Jy
! Total flux subtracted in 200 components = -0.00315882 Jy
! Clean residual min=-0.002341 max=0.005296 Jy/beam
! Clean residual mean=-0.000003 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 1.54343 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 133 components and 1.54343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078647Jy  sigma=1.131271
! Fit after  self-cal, rms=0.078646Jy  sigma=1.131146
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045309 Jy
! Component: 100  -  total flux cleaned = 0.00456063 Jy
! Component: 150  -  total flux cleaned = 0.00390949 Jy
! Component: 200  -  total flux cleaned = 0.00355003 Jy
! Total flux subtracted in 200 components = 0.00355003 Jy
! Clean residual min=-0.002314 max=0.002530 Jy/beam
! Clean residual mean=-0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 1.54698 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 147 components and 1.54698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078296Jy  sigma=1.125937
! Fit after  self-cal, rms=0.078253Jy  sigma=1.125336
! Inverting map 
! Added new window around map position (-10.6, -5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194618 Jy
! Component: 100  -  total flux cleaned = 0.0018889 Jy
! Component: 150  -  total flux cleaned = 0.00182896 Jy
! Component: 200  -  total flux cleaned = 0.00171702 Jy
! Total flux subtracted in 200 components = 0.00171702 Jy
! Clean residual min=-0.002270 max=0.002022 Jy/beam
! Clean residual mean=-0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 1.5487 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 162 components and 1.5487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078122Jy  sigma=1.123393
! Fit after  self-cal, rms=0.078112Jy  sigma=1.123287
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078112Jy  sigma=1.123287
! Fit after  self-cal, rms=0.078101Jy  sigma=1.122383
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.052 mas, bmaj=3.91 mas, bpa=4.964 degrees
! Estimated noise=0.307147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000713592 Jy
! Component: 100  -  total flux cleaned = -0.00113339 Jy
! Component: 150  -  total flux cleaned = -0.0013534 Jy
! Component: 200  -  total flux cleaned = -0.00149287 Jy
! Total flux subtracted in 200 components = -0.00149287 Jy
! Clean residual min=-0.002235 max=0.001972 Jy/beam
! Clean residual mean=-0.000005 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 1.5472 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 185 components and 1.5472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078036Jy  sigma=1.121572
! Fit after  self-cal, rms=0.078019Jy  sigma=1.121400
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.17193e-05 Jy
! Component: 100  -  total flux cleaned = 7.34014e-06 Jy
! Component: 150  -  total flux cleaned = 8.62841e-05 Jy
! Component: 200  -  total flux cleaned = 4.88306e-05 Jy
! Total flux subtracted in 200 components = 4.88306e-05 Jy
! Clean residual min=-0.002072 max=0.001905 Jy/beam
! Clean residual mean=-0.000004 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 1.54725 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 199 components and 1.54725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077995Jy  sigma=1.121112
! Fit after  self-cal, rms=0.077990Jy  sigma=1.121062
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7415 mas, bmaj=1.852 mas, bpa=-4.578 degrees
! Estimated noise=0.207781 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7415 x 1.852 at -4.578 degrees (North through East)
! Clean map  min=-0.0023863  max=1.1337 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077990Jy  sigma=1.121062
! Fit after  self-cal, rms=0.073406Jy  sigma=1.027101
! Inverting map and beam 
! Estimated beam: bmin=0.7414 mas, bmaj=1.852 mas, bpa=-4.553 degrees
! Estimated noise=0.20753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00153025 Jy
! Component: 100  -  total flux cleaned = -0.00200755 Jy
! Component: 150  -  total flux cleaned = -0.00221802 Jy
! Component: 200  -  total flux cleaned = -0.00245194 Jy
! Total flux subtracted in 200 components = -0.00245194 Jy
! Clean residual min=-0.001755 max=0.001845 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 1.5448 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 218 components and 1.5448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073316Jy  sigma=1.025708
! Fit after  self-cal, rms=0.073313Jy  sigma=1.025648
! Inverting map 
! Added new window around map position (5, -7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000635104 Jy
! Component: 100  -  total flux cleaned = 0.000245606 Jy
! Component: 150  -  total flux cleaned = -5.7118e-05 Jy
! Component: 200  -  total flux cleaned = -0.000370487 Jy
! Total flux subtracted in 200 components = -0.000370487 Jy
! Clean residual min=-0.001712 max=0.001677 Jy/beam
! Clean residual mean=-0.000001 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 1.54443 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 233 components and 1.54443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073251Jy  sigma=1.024601
! Fit after  self-cal, rms=0.073247Jy  sigma=1.024570
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073247Jy  sigma=1.024570
! Fit after  self-cal, rms=0.073172Jy  sigma=1.024193
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5721 mas, bmaj=1.54 mas, bpa=-4.828 degrees
! Estimated noise=0.405496 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.811013 Jy
! Component: 100  -  total flux cleaned = 1.13106 Jy
! Component: 150  -  total flux cleaned = 1.29007 Jy
! Component: 200  -  total flux cleaned = 1.37488 Jy
! Total flux subtracted in 200 components = 1.37488 Jy
! Clean residual min=-0.017588 max=0.042060 Jy/beam
! Clean residual mean=-0.000007 rms=0.003066 Jy/beam
! Combined flux in latest and established models = 1.37488 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 1.37488 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7415 mas, bmaj=1.851 mas, bpa=-4.537 degrees
! Estimated noise=0.207356 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0770271 Jy
! Component: 100  -  total flux cleaned = 0.11589 Jy
! Component: 150  -  total flux cleaned = 0.136731 Jy
! Component: 200  -  total flux cleaned = 0.14818 Jy
! Total flux subtracted in 200 components = 0.14818 Jy
! Clean residual min=-0.002998 max=0.005632 Jy/beam
! Clean residual mean=-0.000004 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 1.52306 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 31 components and 1.52306 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667486 Jy
! Component: 100  -  total flux cleaned = 0.0111369 Jy
! Component: 150  -  total flux cleaned = 0.0144652 Jy
! Component: 200  -  total flux cleaned = 0.0168515 Jy
! Total flux subtracted in 200 components = 0.0168515 Jy
! Clean residual min=-0.002388 max=0.002497 Jy/beam
! Clean residual mean=-0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 1.53991 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 48 components and 1.53991 Jy
! Inverting map 
! Added new window around map position (-0.6, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000991355 Jy
! Component: 100  -  total flux cleaned = 0.00124947 Jy
! Component: 150  -  total flux cleaned = 0.00140098 Jy
! Component: 200  -  total flux cleaned = 0.00154382 Jy
! Total flux subtracted in 200 components = 0.00154382 Jy
! Clean residual min=-0.002250 max=0.002105 Jy/beam
! Clean residual mean=-0.000001 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 1.54146 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 65 components and 1.54146 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.052 mas, bmaj=3.909 mas, bpa=4.974 degrees
! Estimated noise=0.306609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000552164 Jy
! Component: 100  -  total flux cleaned = 0.000564619 Jy
! Component: 150  -  total flux cleaned = 0.000485983 Jy
! Component: 200  -  total flux cleaned = 0.000554119 Jy
! Total flux subtracted in 200 components = 0.000554119 Jy
! Clean residual min=-0.001789 max=0.001751 Jy/beam
! Clean residual mean=-0.000002 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 1.54201 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.52287e-06 Jy
! Component: 100  -  total flux cleaned = 2.18834e-06 Jy
! Component: 150  -  total flux cleaned = -2.63024e-05 Jy
! Component: 200  -  total flux cleaned = -7.78346e-05 Jy
! Total flux subtracted in 200 components = -7.78346e-05 Jy
! Clean residual min=-0.001710 max=0.001705 Jy/beam
! Clean residual mean=-0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 1.54193 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 97 components and 1.54193 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7415 mas, bmaj=1.851 mas, bpa=-4.537 degrees
! Estimated noise=0.207356 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256587 Jy
! Component: 100  -  total flux cleaned = -0.000130888 Jy
! Component: 150  -  total flux cleaned = -7.30655e-05 Jy
! Component: 200  -  total flux cleaned = -0.000127657 Jy
! Total flux subtracted in 200 components = -0.000127657 Jy
! Clean residual min=-0.001958 max=0.001924 Jy/beam
! Clean residual mean=-0.000001 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 1.5418 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 110 components and 1.5418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073161Jy  sigma=1.024836
! Fit after  self-cal, rms=0.073128Jy  sigma=1.024361
wmodel /J2129-1538_X_map.mod
! wmodel: Unable to open new model file: /J2129-1538_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2129-1538_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7415 x 1.851 at -4.537 degrees (North through East)
! Clean map  min=-0.002165  max=1.1312 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2129-1538_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.13119 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000358346 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0950359 0.0950359 0.190072 0.380144 0.760287 1.52057 3.04115 6.0823 12.1646 24.3292 48.6584 97.3168
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.131 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3156.7 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2129-1538_X_dfm.log closed on Thu May 19 23:36:16 2016