! Started logfile: /scr/pima/bg219i_uvs/J2030-0622_X_dfm.log on Thu May 19 23:34:09 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2030-0622_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2030-0622_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.784127 visibilities/baseline/integration-bin.
! Found source: J2030-0622
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2030-0622_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007102Jy  sigma=22.789875
! Fit after  self-cal, rms=0.904887Jy  sigma=20.450716
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7851 mas, bmaj=1.83 mas, bpa=4.04 degrees
! Estimated noise=0.389737 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.069778 Jy
! Component: 100  -  total flux cleaned = 0.0927388 Jy
! Total flux subtracted in 100 components = 0.0927388 Jy
! Clean residual min=-0.003973 max=0.010052 Jy/beam
! Clean residual mean=0.000007 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.0927388 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0927388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070132Jy  sigma=1.470679
! Fit after  self-cal, rms=0.069530Jy  sigma=1.457944
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120675 Jy
! Component: 100  -  total flux cleaned = 0.0184836 Jy
! Total flux subtracted in 100 components = 0.0184836 Jy
! Clean residual min=-0.002770 max=0.004407 Jy/beam
! Clean residual mean=0.000004 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.111222 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.111222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066782Jy  sigma=1.383223
! Fit after  self-cal, rms=0.066751Jy  sigma=1.382183
! Inverting map 
! Added new window around map position (-1, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0048099 Jy
! Component: 100  -  total flux cleaned = 0.00750611 Jy
! Total flux subtracted in 100 components = 0.00750611 Jy
! Clean residual min=-0.002492 max=0.002873 Jy/beam
! Clean residual mean=0.000002 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.118728 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 17 components and 0.118728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066319Jy  sigma=1.370325
! Fit after  self-cal, rms=0.066297Jy  sigma=1.369754
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9951 mas, bmaj=2.204 mas, bpa=4.307 degrees
! Estimated noise=0.247235 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00281574 Jy
! Component: 100  -  total flux cleaned = 0.00435254 Jy
! Component: 150  -  total flux cleaned = 0.00529098 Jy
! Component: 200  -  total flux cleaned = 0.00590171 Jy
! Total flux subtracted in 200 components = 0.00590171 Jy
! Clean residual min=-0.002228 max=0.002181 Jy/beam
! Clean residual mean=0.000006 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.12463 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 36 components and 0.12463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066187Jy  sigma=1.366585
! Fit after  self-cal, rms=0.066179Jy  sigma=1.366317
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9951 x 2.204 at 4.307 degrees (North through East)
! Clean map  min=-0.0020253  max=0.09491 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        1.07     KP        1.02     
!   LA        0.97     MK        0.96     NL        1.01     OV        1.01     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.07     HN        1.08     KP        0.99     
!   LA        0.98     MK        1.06     NL        0.99     OV        0.98     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.00     KP        1.03     
!   LA        0.95     MK        1.10     NL        1.00     OV        0.95     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.08     KP        1.02     
!   LA        0.98     MK        0.99     NL        0.98     OV        1.00     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.06     KP        1.01     
!   LA        0.97     MK        0.98     NL        0.97     OV        1.00     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.00     KP        1.02     
!   LA        0.98     MK        0.99     NL        0.99     OV        1.03     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.02     KP        1.04     
!   LA        0.99     MK        0.90     NL        0.99     OV        0.99     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        1.09     KP        1.01     
!   LA        0.92     MK        0.99     NL        1.04     OV        0.98     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.04     KP        1.01     
!   LA        0.98     MK        1.08     NL        1.03     OV        0.95     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.06     KP        1.03     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.97     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.12     HN        1.03     KP        1.03     
!   LA        0.96     MK        0.87     NL        0.98     OV        1.03     
!   PT        0.95     SC        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.08     KP        1.02     
!   LA        1.00     MK        0.95     NL        1.01     OV        0.97     
!   PT        0.94     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.066179Jy  sigma=1.366317
! Fit after  self-cal, rms=0.066939Jy  sigma=1.361860
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9917 mas, bmaj=2.198 mas, bpa=4.526 degrees
! Estimated noise=0.246629 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000277246 Jy
! Component: 100  -  total flux cleaned = 0.000333284 Jy
! Component: 150  -  total flux cleaned = 0.000362699 Jy
! Component: 200  -  total flux cleaned = 0.000387726 Jy
! Total flux subtracted in 200 components = 0.000387726 Jy
! Clean residual min=-0.001875 max=0.001834 Jy/beam
! Clean residual mean=0.000003 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.125018 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.125018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066928Jy  sigma=1.361642
! Fit after  self-cal, rms=0.066973Jy  sigma=1.361510
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066973Jy  sigma=1.361510
! Fit after  self-cal, rms=0.067273Jy  sigma=1.357285
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9899 mas, bmaj=2.198 mas, bpa=4.441 degrees
! Estimated noise=0.246595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000591597 Jy
! Component: 100  -  total flux cleaned = 0.000607003 Jy
! Component: 150  -  total flux cleaned = 0.000594246 Jy
! Component: 200  -  total flux cleaned = 0.000594559 Jy
! Total flux subtracted in 200 components = 0.000594559 Jy
! Clean residual min=-0.001563 max=0.001639 Jy/beam
! Clean residual mean=0.000004 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.125612 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.125612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067266Jy  sigma=1.357137
! Fit after  self-cal, rms=0.067277Jy  sigma=1.357048
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.6, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157094 Jy
! Component: 100  -  total flux cleaned = 0.00187136 Jy
! Component: 150  -  total flux cleaned = 0.0021364 Jy
! Component: 200  -  total flux cleaned = 0.00243047 Jy
! Total flux subtracted in 200 components = 0.00243047 Jy
! Clean residual min=-0.001528 max=0.001432 Jy/beam
! Clean residual mean=0.000004 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.128043 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 74 components and 0.128043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067230Jy  sigma=1.356006
! Fit after  self-cal, rms=0.067226Jy  sigma=1.355910
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067226Jy  sigma=1.355910
! Fit after  self-cal, rms=0.067335Jy  sigma=1.355861
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9881 mas, bmaj=2.195 mas, bpa=4.417 degrees
! Estimated noise=0.246686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00052184 Jy
! Component: 100  -  total flux cleaned = 0.000794239 Jy
! Component: 150  -  total flux cleaned = 0.00103237 Jy
! Component: 200  -  total flux cleaned = 0.00115643 Jy
! Total flux subtracted in 200 components = 0.00115643 Jy
! Clean residual min=-0.001491 max=0.001419 Jy/beam
! Clean residual mean=0.000003 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.129199 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 79 components and 0.129199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067321Jy  sigma=1.355589
! Fit after  self-cal, rms=0.067321Jy  sigma=1.355561
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000240389 Jy
! Component: 100  -  total flux cleaned = 0.000320484 Jy
! Component: 150  -  total flux cleaned = 0.000365288 Jy
! Component: 200  -  total flux cleaned = 0.000435129 Jy
! Total flux subtracted in 200 components = 0.000435129 Jy
! Clean residual min=-0.001470 max=0.001413 Jy/beam
! Clean residual mean=0.000003 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.129634 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.129635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067313Jy  sigma=1.355435
! Fit after  self-cal, rms=0.067312Jy  sigma=1.355430
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067312Jy  sigma=1.355430
! Fit after  self-cal, rms=0.067156Jy  sigma=1.355154
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.267 mas, bmaj=3.748 mas, bpa=3.709 degrees
! Estimated noise=0.301915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612621 Jy
! Component: 100  -  total flux cleaned = 0.00082074 Jy
! Component: 150  -  total flux cleaned = 0.000863331 Jy
! Component: 200  -  total flux cleaned = 0.000901674 Jy
! Total flux subtracted in 200 components = 0.000901674 Jy
! Clean residual min=-0.001450 max=0.001847 Jy/beam
! Clean residual mean=0.000005 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.130536 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 94 components and 0.130536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067153Jy  sigma=1.355151
! Fit after  self-cal, rms=0.067154Jy  sigma=1.355127
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.8, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017502 Jy
! Component: 100  -  total flux cleaned = 0.00270589 Jy
! Component: 150  -  total flux cleaned = 0.00313103 Jy
! Component: 200  -  total flux cleaned = 0.00346707 Jy
! Total flux subtracted in 200 components = 0.00346707 Jy
! Clean residual min=-0.001162 max=0.001445 Jy/beam
! Clean residual mean=0.000000 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.134003 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 149 components and 0.134003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067124Jy  sigma=1.354369
! Fit after  self-cal, rms=0.067118Jy  sigma=1.354304
! Inverting map 
! Added new window around map position (-48.2, 15.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111766 Jy
! Component: 100  -  total flux cleaned = 0.00140448 Jy
! Component: 150  -  total flux cleaned = 0.00153214 Jy
! Component: 200  -  total flux cleaned = 0.00162741 Jy
! Total flux subtracted in 200 components = 0.00162741 Jy
! Clean residual min=-0.001093 max=0.000919 Jy/beam
! Clean residual mean=0.000000 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.135631 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 176 components and 0.135631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067097Jy  sigma=1.353783
! Fit after  self-cal, rms=0.067093Jy  sigma=1.353732
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9865 mas, bmaj=2.192 mas, bpa=4.367 degrees
! Estimated noise=0.246511 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9865 x 2.192 at 4.367 degrees (North through East)
! Clean map  min=-0.0013408  max=0.094691 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7789 mas, bmaj=1.824 mas, bpa=4.082 degrees
! Estimated noise=0.386997 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0697472 Jy
! Component: 100  -  total flux cleaned = 0.0942287 Jy
! Component: 150  -  total flux cleaned = 0.106266 Jy
! Component: 200  -  total flux cleaned = 0.113026 Jy
! Total flux subtracted in 200 components = 0.113026 Jy
! Clean residual min=-0.002650 max=0.003467 Jy/beam
! Clean residual mean=0.000003 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.113026 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.113026 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9865 mas, bmaj=2.192 mas, bpa=4.367 degrees
! Estimated noise=0.246511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00592822 Jy
! Component: 100  -  total flux cleaned = 0.00905647 Jy
! Component: 150  -  total flux cleaned = 0.0112991 Jy
! Component: 200  -  total flux cleaned = 0.0131197 Jy
! Total flux subtracted in 200 components = 0.0131197 Jy
! Clean residual min=-0.001746 max=0.001285 Jy/beam
! Clean residual mean=0.000005 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.126146 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 51 components and 0.126146 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.267 mas, bmaj=3.748 mas, bpa=3.709 degrees
! Estimated noise=0.301915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222927 Jy
! Component: 100  -  total flux cleaned = 0.00389997 Jy
! Component: 150  -  total flux cleaned = 0.00521811 Jy
! Component: 200  -  total flux cleaned = 0.0062811 Jy
! Total flux subtracted in 200 components = 0.0062811 Jy
! Clean residual min=-0.001399 max=0.001030 Jy/beam
! Clean residual mean=0.000003 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.132427 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000857321 Jy
! Component: 100  -  total flux cleaned = 0.00147861 Jy
! Component: 150  -  total flux cleaned = 0.00180932 Jy
! Component: 200  -  total flux cleaned = 0.00213185 Jy
! Total flux subtracted in 200 components = 0.00213185 Jy
! Clean residual min=-0.001235 max=0.000904 Jy/beam
! Clean residual mean=0.000002 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.134559 Jy
! Adding 96 model components to the UV plane model.
! The established model now contains 137 components and 0.134559 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9865 mas, bmaj=2.192 mas, bpa=4.367 degrees
! Estimated noise=0.246511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000560672 Jy
! Component: 100  -  total flux cleaned = -0.000394561 Jy
! Component: 150  -  total flux cleaned = -0.000244669 Jy
! Component: 200  -  total flux cleaned = -0.000160817 Jy
! Total flux subtracted in 200 components = -0.000160817 Jy
! Clean residual min=-0.001231 max=0.001023 Jy/beam
! Clean residual mean=0.000001 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.134398 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 168 components and 0.134398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067085Jy  sigma=1.353587
! Fit after  self-cal, rms=0.067081Jy  sigma=1.353397
wmodel /J2030-0622_X_map.mod
! wmodel: Unable to open new model file: /J2030-0622_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2030-0622_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9865 x 2.192 at 4.367 degrees (North through East)
! Clean map  min=-0.0010795  max=0.09477 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2030-0622_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0947703 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000259695 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.822077 0.822077 1.64415 3.28831 6.57661 13.1532 26.3065 52.6129
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.094 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  364.929 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2030-0622_X_dfm.log closed on Thu May 19 23:34:12 2016