! Started logfile: /scr/pima/bg219i_uvs/J2030-0503_S_dfm.log on Thu May 19 23:33:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J2030-0503_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2030-0503_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J2030-0503
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7776 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2030-0503_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012250Jy  sigma=21.729265
! Fit after  self-cal, rms=0.903123Jy  sigma=19.393176
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.044 mas, bmaj=7.132 mas, bpa=0.8801 degrees
! Estimated noise=0.472964 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0732883 Jy
! Component: 100  -  total flux cleaned = 0.0901179 Jy
! Total flux subtracted in 100 components = 0.0901179 Jy
! Clean residual min=-0.004193 max=0.006461 Jy/beam
! Clean residual mean=0.000007 rms=0.001148 Jy/beam
! Combined flux in latest and established models = 0.0901179 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0901179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067199Jy  sigma=1.377615
! Fit after  self-cal, rms=0.067142Jy  sigma=1.376952
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.722 mas, bmaj=8.268 mas, bpa=1.135 degrees
! Estimated noise=0.380001 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111013 Jy
! Component: 100  -  total flux cleaned = 0.0166088 Jy
! Component: 150  -  total flux cleaned = 0.0199373 Jy
! Component: 200  -  total flux cleaned = 0.0220277 Jy
! Total flux subtracted in 200 components = 0.0220277 Jy
! Clean residual min=-0.003857 max=0.009348 Jy/beam
! Clean residual mean=0.000003 rms=0.001283 Jy/beam
! Combined flux in latest and established models = 0.112146 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 43 components and 0.112146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065374Jy  sigma=1.337854
! Fit after  self-cal, rms=0.065350Jy  sigma=1.337392
! Inverting map 
! Added new window around map position (16, -13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0091061 Jy
! Component: 100  -  total flux cleaned = 0.0137515 Jy
! Component: 150  -  total flux cleaned = 0.016837 Jy
! Component: 200  -  total flux cleaned = 0.0192096 Jy
! Total flux subtracted in 200 components = 0.0192096 Jy
! Clean residual min=-0.002648 max=0.003234 Jy/beam
! Clean residual mean=0.000001 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.131355 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 104 components and 0.131355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064076Jy  sigma=1.309208
! Fit after  self-cal, rms=0.063986Jy  sigma=1.307455
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.722 x 8.268 at 1.135 degrees (North through East)
! Clean map  min=-0.0026953  max=0.097059 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.07     KP        0.94     
!   LA        0.96     MK        1.09     NL        1.02     OV        1.06     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.95     KP        0.94     
!   LA        0.94     MK        0.99     NL        0.99     OV        1.05     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.06     KP        0.96     
!   LA        0.95     MK        1.04     NL        0.95     OV        0.99     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.02     KP        0.96     
!   LA        0.99     MK        0.97     NL        1.05     OV        0.99     
!   PT        0.96     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.063986Jy  sigma=1.307455
! Fit after  self-cal, rms=0.063403Jy  sigma=1.300825
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.751 mas, bmaj=8.32 mas, bpa=1.308 degrees
! Estimated noise=0.376457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183696 Jy
! Component: 100  -  total flux cleaned = 0.00237429 Jy
! Component: 150  -  total flux cleaned = 0.00254598 Jy
! Component: 200  -  total flux cleaned = 0.00262985 Jy
! Total flux subtracted in 200 components = 0.00262985 Jy
! Clean residual min=-0.002250 max=0.002484 Jy/beam
! Clean residual mean=-0.000001 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.133985 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 134 components and 0.133985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063346Jy  sigma=1.299295
! Fit after  self-cal, rms=0.063359Jy  sigma=1.299088
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063359Jy  sigma=1.299088
! Fit after  self-cal, rms=0.063220Jy  sigma=1.295463
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.754 mas, bmaj=8.338 mas, bpa=1.194 degrees
! Estimated noise=0.375884 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00091951 Jy
! Component: 100  -  total flux cleaned = 0.00113922 Jy
! Component: 150  -  total flux cleaned = 0.00121174 Jy
! Component: 200  -  total flux cleaned = 0.0012346 Jy
! Total flux subtracted in 200 components = 0.0012346 Jy
! Clean residual min=-0.002085 max=0.002275 Jy/beam
! Clean residual mean=-0.000002 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.13522 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 149 components and 0.13522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063200Jy  sigma=1.294961
! Fit after  self-cal, rms=0.063211Jy  sigma=1.294878
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238119 Jy
! Component: 100  -  total flux cleaned = 0.000238179 Jy
! Component: 150  -  total flux cleaned = 0.000257914 Jy
! Component: 200  -  total flux cleaned = 0.000276619 Jy
! Total flux subtracted in 200 components = 0.000276619 Jy
! Clean residual min=-0.002054 max=0.002254 Jy/beam
! Clean residual mean=-0.000002 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.135496 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 154 components and 0.135496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063200Jy  sigma=1.294630
! Fit after  self-cal, rms=0.063200Jy  sigma=1.294624
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063200Jy  sigma=1.294624
! Fit after  self-cal, rms=0.063215Jy  sigma=1.294593
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.755 mas, bmaj=8.34 mas, bpa=1.214 degrees
! Estimated noise=0.375791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026249 Jy
! Component: 100  -  total flux cleaned = 0.000317708 Jy
! Component: 150  -  total flux cleaned = 0.000334563 Jy
! Component: 200  -  total flux cleaned = 0.000368419 Jy
! Total flux subtracted in 200 components = 0.000368419 Jy
! Clean residual min=-0.002039 max=0.002245 Jy/beam
! Clean residual mean=-0.000002 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.135865 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 159 components and 0.135865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063206Jy  sigma=1.294396
! Fit after  self-cal, rms=0.063206Jy  sigma=1.294392
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.80314e-05 Jy
! Component: 100  -  total flux cleaned = 0.000119463 Jy
! Component: 150  -  total flux cleaned = 0.000134444 Jy
! Component: 200  -  total flux cleaned = 0.000163168 Jy
! Total flux subtracted in 200 components = 0.000163168 Jy
! Clean residual min=-0.002014 max=0.002237 Jy/beam
! Clean residual mean=-0.000002 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.136028 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 165 components and 0.136028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063199Jy  sigma=1.294247
! Fit after  self-cal, rms=0.063199Jy  sigma=1.294243
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063199Jy  sigma=1.294243
! Fit after  self-cal, rms=0.063188Jy  sigma=1.294231
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.969 mas, bmaj=12.9 mas, bpa=3.557 degrees
! Estimated noise=0.45445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000670958 Jy
! Component: 100  -  total flux cleaned = 0.000877918 Jy
! Component: 150  -  total flux cleaned = 0.000898522 Jy
! Component: 200  -  total flux cleaned = 0.000935644 Jy
! Total flux subtracted in 200 components = 0.000935644 Jy
! Clean residual min=-0.002263 max=0.002412 Jy/beam
! Clean residual mean=-0.000005 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.136963 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 176 components and 0.136963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063188Jy  sigma=1.294210
! Fit after  self-cal, rms=0.063184Jy  sigma=1.294122
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.37127e-05 Jy
! Component: 100  -  total flux cleaned = 3.80006e-05 Jy
! Component: 150  -  total flux cleaned = 3.72824e-05 Jy
! Component: 200  -  total flux cleaned = 3.63817e-05 Jy
! Total flux subtracted in 200 components = 3.63817e-05 Jy
! Clean residual min=-0.002219 max=0.002368 Jy/beam
! Clean residual mean=-0.000005 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.137 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 184 components and 0.137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063188Jy  sigma=1.294195
! Fit after  self-cal, rms=0.063184Jy  sigma=1.294123
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.756 mas, bmaj=8.341 mas, bpa=1.241 degrees
! Estimated noise=0.37561 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.756 x 8.341 at 1.241 degrees (North through East)
! Clean map  min=-0.0019621  max=0.096221 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.063 mas, bmaj=7.189 mas, bpa=0.8504 degrees
! Estimated noise=0.472397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0730629 Jy
! Component: 100  -  total flux cleaned = 0.0897623 Jy
! Component: 150  -  total flux cleaned = 0.0974389 Jy
! Component: 200  -  total flux cleaned = 0.103292 Jy
! Total flux subtracted in 200 components = 0.103292 Jy
! Clean residual min=-0.003278 max=0.004797 Jy/beam
! Clean residual mean=0.000004 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 0.103292 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.103292 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.756 mas, bmaj=8.341 mas, bpa=1.241 degrees
! Estimated noise=0.37561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0078562 Jy
! Component: 100  -  total flux cleaned = 0.0133993 Jy
! Component: 150  -  total flux cleaned = 0.0175461 Jy
! Component: 200  -  total flux cleaned = 0.0207551 Jy
! Total flux subtracted in 200 components = 0.0207551 Jy
! Clean residual min=-0.002318 max=0.002734 Jy/beam
! Clean residual mean=0.000001 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.124047 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 62 components and 0.124047 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.969 mas, bmaj=12.9 mas, bpa=3.557 degrees
! Estimated noise=0.45445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00385239 Jy
! Component: 100  -  total flux cleaned = 0.00636902 Jy
! Component: 150  -  total flux cleaned = 0.00814085 Jy
! Component: 200  -  total flux cleaned = 0.00946196 Jy
! Total flux subtracted in 200 components = 0.00946196 Jy
! Clean residual min=-0.002192 max=0.002486 Jy/beam
! Clean residual mean=-0.000003 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.133509 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100959 Jy
! Component: 100  -  total flux cleaned = 0.00178609 Jy
! Component: 150  -  total flux cleaned = 0.00238591 Jy
! Component: 200  -  total flux cleaned = 0.00269642 Jy
! Total flux subtracted in 200 components = 0.00269642 Jy
! Clean residual min=-0.002113 max=0.002395 Jy/beam
! Clean residual mean=-0.000004 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.136206 Jy
! Adding 116 model components to the UV plane model.
! The established model now contains 163 components and 0.136206 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.756 mas, bmaj=8.341 mas, bpa=1.241 degrees
! Estimated noise=0.37561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000288615 Jy
! Component: 100  -  total flux cleaned = 0.000140237 Jy
! Component: 150  -  total flux cleaned = 0.000114959 Jy
! Component: 200  -  total flux cleaned = 0.000136478 Jy
! Total flux subtracted in 200 components = 0.000136478 Jy
! Clean residual min=-0.001828 max=0.002098 Jy/beam
! Clean residual mean=-0.000002 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.136342 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 179 components and 0.136342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063144Jy  sigma=1.293009
! Fit after  self-cal, rms=0.063134Jy  sigma=1.292778
wmodel /J2030-0503_S_map.mod
! wmodel: Unable to open new model file: /J2030-0503_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2030-0503_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.756 x 8.341 at 1.241 degrees (North through East)
! Clean map  min=-0.0017562  max=0.097274 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2030-0503_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0972739 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000514952 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.58815 1.58815 3.1763 6.3526 12.7052 25.4104 50.8208
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.097 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  188.898 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2030-0503_S_dfm.log closed on Thu May 19 23:34:01 2016