! Started logfile: /scr/pima/bg219i_uvs/J2002+4725_X_dfm.log on Thu May 19 23:33:32 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J2002+4725_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J2002+4725_X_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.779365 visibilities/baseline/integration-bin.
! Found source: J2002+4725
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5892 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2002+4725_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.331352Jy  sigma=30.181298
! Fit after  self-cal, rms=0.176735Jy  sigma=3.972330
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7807 mas, bmaj=1.128 mas, bpa=24.68 degrees
! Estimated noise=0.611826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.653501 Jy
! Component: 100  -  total flux cleaned = 0.826732 Jy
! Total flux subtracted in 100 components = 0.826732 Jy
! Clean residual min=-0.026724 max=0.070216 Jy/beam
! Clean residual mean=-0.000031 rms=0.006143 Jy/beam
! Combined flux in latest and established models = 0.826732 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.826732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138544Jy  sigma=3.099352
! Fit after  self-cal, rms=0.138533Jy  sigma=3.099151
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0735878 Jy
! Component: 100  -  total flux cleaned = 0.110975 Jy
! Total flux subtracted in 100 components = 0.110975 Jy
! Clean residual min=-0.013447 max=0.018348 Jy/beam
! Clean residual mean=-0.000006 rms=0.002575 Jy/beam
! Combined flux in latest and established models = 0.937706 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.937707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085971Jy  sigma=1.770354
! Fit after  self-cal, rms=0.085957Jy  sigma=1.770101
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021297 Jy
! Component: 100  -  total flux cleaned = 0.0335479 Jy
! Total flux subtracted in 100 components = 0.0335479 Jy
! Clean residual min=-0.010486 max=0.010453 Jy/beam
! Clean residual mean=0.000001 rms=0.001915 Jy/beam
! Combined flux in latest and established models = 0.971254 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.971254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081096Jy  sigma=1.603945
! Fit after  self-cal, rms=0.081091Jy  sigma=1.603860
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9983 mas, bmaj=1.33 mas, bpa=26.48 degrees
! Estimated noise=0.42764 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00681608 Jy
! Component: 100  -  total flux cleaned = 0.0094259 Jy
! Component: 150  -  total flux cleaned = 0.00996568 Jy
! Component: 200  -  total flux cleaned = 0.0103193 Jy
! Total flux subtracted in 200 components = 0.0103193 Jy
! Clean residual min=-0.008004 max=0.010081 Jy/beam
! Clean residual mean=0.000035 rms=0.002299 Jy/beam
! Combined flux in latest and established models = 0.981574 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 23 components and 0.981574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080874Jy  sigma=1.580690
! Fit after  self-cal, rms=0.080863Jy  sigma=1.580577
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9983 x 1.33 at 26.48 degrees (North through East)
! Clean map  min=-0.0071959  max=0.87318 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.03     KP        0.98     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.04     KP        0.99     
!   LA        1.00     MK        1.00     NL        0.99     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.02     KP        0.99     
!   LA        0.98     MK        1.00     NL        0.99     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.01     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.04     KP        0.99     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.02     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.01     KP        1.00     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.00     KP        0.99     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.03     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.03     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.05     KP        1.01     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.080863Jy  sigma=1.580577
! Fit after  self-cal, rms=0.077955Jy  sigma=1.496370
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9976 mas, bmaj=1.335 mas, bpa=26.46 degrees
! Estimated noise=0.427052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0037071 Jy
! Component: 100  -  total flux cleaned = -0.00497956 Jy
! Component: 150  -  total flux cleaned = -0.00519102 Jy
! Component: 200  -  total flux cleaned = -0.00532011 Jy
! Total flux subtracted in 200 components = -0.00532011 Jy
! Clean residual min=-0.007258 max=0.007531 Jy/beam
! Clean residual mean=0.000032 rms=0.001818 Jy/beam
! Combined flux in latest and established models = 0.976254 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 26 components and 0.976254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077653Jy  sigma=1.492628
! Fit after  self-cal, rms=0.077657Jy  sigma=1.492570
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077657Jy  sigma=1.492570
! Fit after  self-cal, rms=0.074280Jy  sigma=1.397733
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9993 mas, bmaj=1.334 mas, bpa=26.59 degrees
! Estimated noise=0.427023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.05774e-05 Jy
! Component: 100  -  total flux cleaned = -8.19065e-05 Jy
! Component: 150  -  total flux cleaned = -0.000185084 Jy
! Component: 200  -  total flux cleaned = -0.000235711 Jy
! Total flux subtracted in 200 components = -0.000235711 Jy
! Clean residual min=-0.003781 max=0.003482 Jy/beam
! Clean residual mean=0.000017 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.976018 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 26 components and 0.976018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074209Jy  sigma=1.396103
! Fit after  self-cal, rms=0.074213Jy  sigma=1.396082
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.57278e-05 Jy
! Component: 100  -  total flux cleaned = -0.00013941 Jy
! Component: 150  -  total flux cleaned = -0.000183176 Jy
! Component: 200  -  total flux cleaned = -0.000265486 Jy
! Total flux subtracted in 200 components = -0.000265486 Jy
! Clean residual min=-0.003765 max=0.003408 Jy/beam
! Clean residual mean=0.000017 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.975752 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 26 components and 0.975752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074166Jy  sigma=1.394940
! Fit after  self-cal, rms=0.074166Jy  sigma=1.394938
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074166Jy  sigma=1.394938
! Fit after  self-cal, rms=0.074126Jy  sigma=1.394749
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9987 mas, bmaj=1.334 mas, bpa=26.61 degrees
! Estimated noise=0.426739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.71666e-05 Jy
! Component: 100  -  total flux cleaned = 0.000127671 Jy
! Component: 150  -  total flux cleaned = 8.73669e-05 Jy
! Component: 200  -  total flux cleaned = 1.14642e-05 Jy
! Total flux subtracted in 200 components = 1.14642e-05 Jy
! Clean residual min=-0.003717 max=0.003384 Jy/beam
! Clean residual mean=0.000017 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.975764 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 26 components and 0.975764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074076Jy  sigma=1.393725
! Fit after  self-cal, rms=0.074076Jy  sigma=1.393725
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.69696e-05 Jy
! Component: 100  -  total flux cleaned = -7.27115e-05 Jy
! Component: 150  -  total flux cleaned = -0.000139898 Jy
! Component: 200  -  total flux cleaned = -0.000172162 Jy
! Total flux subtracted in 200 components = -0.000172162 Jy
! Clean residual min=-0.003714 max=0.003337 Jy/beam
! Clean residual mean=0.000017 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.975592 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.975592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074047Jy  sigma=1.393044
! Fit after  self-cal, rms=0.074047Jy  sigma=1.393043
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074047Jy  sigma=1.393043
! Fit after  self-cal, rms=0.074002Jy  sigma=1.392821
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.236 mas, bmaj=2.806 mas, bpa=45.09 degrees
! Estimated noise=0.569642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00168749 Jy
! Component: 100  -  total flux cleaned = -0.00207581 Jy
! Component: 150  -  total flux cleaned = -0.00211259 Jy
! Component: 200  -  total flux cleaned = -0.00214714 Jy
! Total flux subtracted in 200 components = -0.00214714 Jy
! Clean residual min=-0.003900 max=0.004227 Jy/beam
! Clean residual mean=0.000038 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.973444 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 32 components and 0.973445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073994Jy  sigma=1.393520
! Fit after  self-cal, rms=0.073992Jy  sigma=1.393374
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.78878e-05 Jy
! Component: 100  -  total flux cleaned = 2.77956e-05 Jy
! Component: 150  -  total flux cleaned = -2.15804e-05 Jy
! Component: 200  -  total flux cleaned = -5.21639e-05 Jy
! Total flux subtracted in 200 components = -5.21639e-05 Jy
! Clean residual min=-0.003880 max=0.004203 Jy/beam
! Clean residual mean=0.000038 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.973392 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 36 components and 0.973392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074009Jy  sigma=1.393864
! Fit after  self-cal, rms=0.074010Jy  sigma=1.393824
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9979 mas, bmaj=1.334 mas, bpa=26.62 degrees
! Estimated noise=0.426404 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9979 x 1.334 at 26.62 degrees (North through East)
! Clean map  min=-0.0032101  max=0.87116 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074010Jy  sigma=1.393824
! Fit after  self-cal, rms=0.069191Jy  sigma=1.274749
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.332 mas, bpa=26.74 degrees
! Estimated noise=0.425563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00239563 Jy
! Component: 100  -  total flux cleaned = -0.00263207 Jy
! Component: 150  -  total flux cleaned = -0.00263308 Jy
! Component: 200  -  total flux cleaned = -0.00263402 Jy
! Total flux subtracted in 200 components = -0.00263402 Jy
! Clean residual min=-0.004062 max=0.003708 Jy/beam
! Clean residual mean=0.000021 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.970758 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 38 components and 0.970758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069062Jy  sigma=1.273038
! Fit after  self-cal, rms=0.069060Jy  sigma=1.273024
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.08055e-05 Jy
! Component: 100  -  total flux cleaned = -0.000119418 Jy
! Component: 150  -  total flux cleaned = -0.000148842 Jy
! Component: 200  -  total flux cleaned = -0.00020405 Jy
! Total flux subtracted in 200 components = -0.00020405 Jy
! Clean residual min=-0.004028 max=0.003663 Jy/beam
! Clean residual mean=0.000021 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.970554 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 39 components and 0.970554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069038Jy  sigma=1.272488
! Fit after  self-cal, rms=0.069038Jy  sigma=1.272485
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069038Jy  sigma=1.272485
! Fit after  self-cal, rms=0.068847Jy  sigma=1.271094
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7831 mas, bmaj=1.128 mas, bpa=24.97 degrees
! Estimated noise=0.609398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.650881 Jy
! Component: 100  -  total flux cleaned = 0.821934 Jy
! Component: 150  -  total flux cleaned = 0.894794 Jy
! Component: 200  -  total flux cleaned = 0.931962 Jy
! Total flux subtracted in 200 components = 0.931962 Jy
! Clean residual min=-0.010383 max=0.018269 Jy/beam
! Clean residual mean=-0.000003 rms=0.002037 Jy/beam
! Combined flux in latest and established models = 0.931962 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.931962 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.331 mas, bpa=26.8 degrees
! Estimated noise=0.424427 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0217968 Jy
! Component: 100  -  total flux cleaned = 0.0317711 Jy
! Component: 150  -  total flux cleaned = 0.0363482 Jy
! Component: 200  -  total flux cleaned = 0.036821 Jy
! Total flux subtracted in 200 components = 0.036821 Jy
! Clean residual min=-0.004089 max=0.004772 Jy/beam
! Clean residual mean=0.000021 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.968783 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.968783 Jy
! Inverting map 
! Added new window around map position (-8.4, -29.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00383598 Jy
! Component: 100  -  total flux cleaned = 0.00410466 Jy
! Component: 150  -  total flux cleaned = 0.00426386 Jy
! Component: 200  -  total flux cleaned = 0.00433985 Jy
! Total flux subtracted in 200 components = 0.00433985 Jy
! Clean residual min=-0.003801 max=0.004284 Jy/beam
! Clean residual mean=0.000019 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.973123 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 0.973122 Jy
! Inverting map 
! Added new window around map position (8.4, 29.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396113 Jy
! Component: 100  -  total flux cleaned = 0.00589098 Jy
! Component: 150  -  total flux cleaned = 0.00657632 Jy
! Component: 200  -  total flux cleaned = 0.00689439 Jy
! Total flux subtracted in 200 components = 0.00689439 Jy
! Clean residual min=-0.003276 max=0.003810 Jy/beam
! Clean residual mean=0.000016 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.980017 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.980017 Jy
! Inverting map 
! Added new window around map position (11.2, 36.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00370808 Jy
! Component: 100  -  total flux cleaned = 0.00548589 Jy
! Component: 150  -  total flux cleaned = 0.00637884 Jy
! Component: 200  -  total flux cleaned = 0.00681748 Jy
! Total flux subtracted in 200 components = 0.00681748 Jy
! Clean residual min=-0.003242 max=0.003174 Jy/beam
! Clean residual mean=0.000013 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.986834 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 55 components and 0.986834 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.239 mas, bmaj=2.811 mas, bpa=45.18 degrees
! Estimated noise=0.565611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107273 Jy
! Component: 100  -  total flux cleaned = -0.000342366 Jy
! Component: 150  -  total flux cleaned = 0.000294723 Jy
! Component: 200  -  total flux cleaned = 0.000822738 Jy
! Total flux subtracted in 200 components = 0.000822738 Jy
! Clean residual min=-0.004007 max=0.004047 Jy/beam
! Clean residual mean=0.000025 rms=0.001155 Jy/beam
! Combined flux in latest and established models = 0.987657 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000527925 Jy
! Component: 100  -  total flux cleaned = 0.000729228 Jy
! Component: 150  -  total flux cleaned = 0.00091774 Jy
! Component: 200  -  total flux cleaned = 0.0010649 Jy
! Total flux subtracted in 200 components = 0.0010649 Jy
! Clean residual min=-0.003964 max=0.003997 Jy/beam
! Clean residual mean=0.000023 rms=0.001138 Jy/beam
! Combined flux in latest and established models = 0.988722 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.988722 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.331 mas, bpa=26.8 degrees
! Estimated noise=0.424427 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141459 Jy
! Component: 100  -  total flux cleaned = 0.00177617 Jy
! Component: 150  -  total flux cleaned = 0.00195552 Jy
! Component: 200  -  total flux cleaned = 0.00195395 Jy
! Total flux subtracted in 200 components = 0.00195395 Jy
! Clean residual min=-0.002950 max=0.003064 Jy/beam
! Clean residual mean=0.000011 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.990676 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.990676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068145Jy  sigma=1.264983
! Fit after  self-cal, rms=0.068127Jy  sigma=1.264149
wmodel /J2002+4725_X_map.mod
! wmodel: Unable to open new model file: /J2002+4725_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J2002+4725_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.002 x 1.331 at 26.8 degrees (North through East)
! Clean map  min=-0.0026713  max=0.86787 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J2002+4725_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.867872 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000725811 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.250893 0.250893 0.501787 1.00357 2.00715 4.0143 8.02859 16.0572 32.1144 64.2287
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.867 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1195.73 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J2002+4725_X_dfm.log closed on Thu May 19 23:33:34 2016