! Started logfile: /scr/pima/bg219i_uvs/J1800+7828_X_dfm.log on Thu May 19 23:32:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1800+7828_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1800+7828_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.853968 visibilities/baseline/integration-bin.
! Found source: J1800+7828
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3228 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1800+7828_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.245680Jy  sigma=24.211205
! Fit after  self-cal, rms=1.023842Jy  sigma=10.942795
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5964 mas, bmaj=2.662 mas, bpa=53.14 degrees
! Estimated noise=2.11102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.38989 Jy
! Component: 100  -  total flux cleaned = 1.73856 Jy
! Total flux subtracted in 100 components = 1.73856 Jy
! Clean residual min=-0.090546 max=0.159639 Jy/beam
! Clean residual mean=0.000016 rms=0.023437 Jy/beam
! Combined flux in latest and established models = 1.73856 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.73856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.457414Jy  sigma=4.720376
! Fit after  self-cal, rms=0.453367Jy  sigma=4.698427
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194865 Jy
! Component: 100  -  total flux cleaned = 0.315136 Jy
! Total flux subtracted in 100 components = 0.315136 Jy
! Clean residual min=-0.059088 max=0.077296 Jy/beam
! Clean residual mean=0.000016 rms=0.014364 Jy/beam
! Combined flux in latest and established models = 2.0537 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 17 components and 2.0537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.278212Jy  sigma=2.857147
! Fit after  self-cal, rms=0.270743Jy  sigma=2.806552
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7366 mas, bmaj=2.916 mas, bpa=52.04 degrees
! Estimated noise=1.36613 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142071 Jy
! Component: 100  -  total flux cleaned = 0.222267 Jy
! Component: 150  -  total flux cleaned = 0.269376 Jy
! Component: 200  -  total flux cleaned = 0.299937 Jy
! Total flux subtracted in 200 components = 0.299937 Jy
! Clean residual min=-0.036715 max=0.067427 Jy/beam
! Clean residual mean=0.000072 rms=0.011458 Jy/beam
! Combined flux in latest and established models = 2.35364 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 31 components and 2.35364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.172617Jy  sigma=1.707109
! Fit after  self-cal, rms=0.167823Jy  sigma=1.657181
! Inverting map 
! Added new window around map position (6.2, 11.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0664614 Jy
! Component: 100  -  total flux cleaned = 0.106318 Jy
! Component: 150  -  total flux cleaned = 0.132521 Jy
! Component: 200  -  total flux cleaned = 0.137549 Jy
! Total flux subtracted in 200 components = 0.137549 Jy
! Clean residual min=-0.033199 max=0.039990 Jy/beam
! Clean residual mean=0.000099 rms=0.007623 Jy/beam
! Combined flux in latest and established models = 2.49119 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 54 components and 2.49118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131697Jy  sigma=1.292276
! Fit after  self-cal, rms=0.129513Jy  sigma=1.259859
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7366 x 2.916 at 52.04 degrees (North through East)
! Clean map  min=-0.028688  max=1.897 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.11     HN        0.99     KP        0.98     
!   LA        1.01     MK        1.01     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.10     HN        1.00     KP        0.97     
!   LA        1.02     MK        1.01     NL        1.00     OV        0.97     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        0.98     KP        1.00     
!   LA        1.02     MK        1.01     NL        1.00     OV        0.96     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.98     KP        1.00     
!   LA        1.01     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        0.98     KP        1.00     
!   LA        1.02     MK        0.99     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        0.98     KP        1.00     
!   LA        1.01     MK        1.00     NL        0.99     OV        0.96     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        0.98     KP        1.00     
!   LA        1.03     MK        1.01     NL        1.00     OV        0.96     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.09     HN        0.96     KP        0.99     
!   LA        1.02     MK        1.01     NL        0.99     OV        0.95     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.09     HN        0.96     KP        1.00     
!   LA        1.01     MK        0.99     NL        1.00     OV        0.96     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.10     HN        0.99     KP        1.00     
!   LA        1.02     MK        1.00     NL        0.99     OV        0.96     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.13     HN        0.99     KP        1.00     
!   LA        1.01     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.12     HN        0.97     KP        1.01     
!   LA        1.01     MK        1.00     NL        1.00     OV        0.96     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.129513Jy  sigma=1.259859
! Fit after  self-cal, rms=0.103234Jy  sigma=0.947796
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7364 mas, bmaj=2.925 mas, bpa=51.97 degrees
! Estimated noise=1.37212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7.8, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0188789 Jy
! Component: 100  -  total flux cleaned = 0.0219666 Jy
! Component: 150  -  total flux cleaned = 0.0253742 Jy
! Component: 200  -  total flux cleaned = 0.0268702 Jy
! Total flux subtracted in 200 components = 0.0268702 Jy
! Clean residual min=-0.013380 max=0.018293 Jy/beam
! Clean residual mean=0.000052 rms=0.003313 Jy/beam
! Combined flux in latest and established models = 2.51805 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 78 components and 2.51805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096001Jy  sigma=0.873713
! Fit after  self-cal, rms=0.095513Jy  sigma=0.867578
! Inverting map 
! Added new window around map position (-19.8, -21.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017503 Jy
! Component: 100  -  total flux cleaned = 0.0236945 Jy
! Component: 150  -  total flux cleaned = 0.0280903 Jy
! Component: 200  -  total flux cleaned = 0.0313613 Jy
! Total flux subtracted in 200 components = 0.0313613 Jy
! Clean residual min=-0.011563 max=0.009191 Jy/beam
! Clean residual mean=0.000050 rms=0.002485 Jy/beam
! Combined flux in latest and established models = 2.54942 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 106 components and 2.54942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090495Jy  sigma=0.831025
! Fit after  self-cal, rms=0.090048Jy  sigma=0.827654
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090048Jy  sigma=0.827654
! Fit after  self-cal, rms=0.089371Jy  sigma=0.820307
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7362 mas, bmaj=2.924 mas, bpa=51.96 degrees
! Estimated noise=1.36929 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115577 Jy
! Component: 100  -  total flux cleaned = 0.0044386 Jy
! Component: 150  -  total flux cleaned = 0.00621699 Jy
! Component: 200  -  total flux cleaned = 0.00682641 Jy
! Total flux subtracted in 200 components = 0.00682641 Jy
! Clean residual min=-0.009316 max=0.007987 Jy/beam
! Clean residual mean=0.000048 rms=0.002151 Jy/beam
! Combined flux in latest and established models = 2.55624 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 127 components and 2.55624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087951Jy  sigma=0.808547
! Fit after  self-cal, rms=0.087851Jy  sigma=0.808184
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154129 Jy
! Component: 100  -  total flux cleaned = 0.00241923 Jy
! Component: 150  -  total flux cleaned = 0.00323169 Jy
! Component: 200  -  total flux cleaned = 0.00415257 Jy
! Total flux subtracted in 200 components = 0.00415257 Jy
! Clean residual min=-0.008164 max=0.007161 Jy/beam
! Clean residual mean=0.000044 rms=0.002025 Jy/beam
! Combined flux in latest and established models = 2.5604 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 147 components and 2.5604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087194Jy  sigma=0.802196
! Fit after  self-cal, rms=0.087130Jy  sigma=0.802039
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087130Jy  sigma=0.802039
! Fit after  self-cal, rms=0.086960Jy  sigma=0.800911
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.736 mas, bmaj=2.924 mas, bpa=51.95 degrees
! Estimated noise=1.36795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000242137 Jy
! Component: 100  -  total flux cleaned = 0.00111408 Jy
! Component: 150  -  total flux cleaned = 0.00195411 Jy
! Component: 200  -  total flux cleaned = 0.00260905 Jy
! Total flux subtracted in 200 components = 0.00260905 Jy
! Clean residual min=-0.007356 max=0.006928 Jy/beam
! Clean residual mean=0.000041 rms=0.001907 Jy/beam
! Combined flux in latest and established models = 2.563 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 159 components and 2.563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086444Jy  sigma=0.796359
! Fit after  self-cal, rms=0.086385Jy  sigma=0.796219
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.37979e-05 Jy
! Component: 100  -  total flux cleaned = 0.000552614 Jy
! Component: 150  -  total flux cleaned = 0.00134445 Jy
! Component: 200  -  total flux cleaned = 0.00166669 Jy
! Total flux subtracted in 200 components = 0.00166669 Jy
! Clean residual min=-0.007003 max=0.006845 Jy/beam
! Clean residual mean=0.000039 rms=0.001837 Jy/beam
! Combined flux in latest and established models = 2.56467 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 173 components and 2.56467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086071Jy  sigma=0.793261
! Fit after  self-cal, rms=0.086024Jy  sigma=0.793159
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086024Jy  sigma=0.793159
! Fit after  self-cal, rms=0.085923Jy  sigma=0.792619
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.849 mas, bmaj=4.183 mas, bpa=43.35 degrees
! Estimated noise=2.02478 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000629923 Jy
! Component: 100  -  total flux cleaned = 0.00105829 Jy
! Component: 150  -  total flux cleaned = 0.00245267 Jy
! Component: 200  -  total flux cleaned = 0.00343747 Jy
! Total flux subtracted in 200 components = 0.00343747 Jy
! Clean residual min=-0.012118 max=0.012541 Jy/beam
! Clean residual mean=0.000084 rms=0.003631 Jy/beam
! Combined flux in latest and established models = 2.56811 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 195 components and 2.56811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085672Jy  sigma=0.790285
! Fit after  self-cal, rms=0.085615Jy  sigma=0.789882
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0003936 Jy
! Component: 100  -  total flux cleaned = 0.000823902 Jy
! Component: 150  -  total flux cleaned = 0.00112724 Jy
! Component: 200  -  total flux cleaned = 0.00141243 Jy
! Total flux subtracted in 200 components = 0.00141243 Jy
! Clean residual min=-0.011889 max=0.012245 Jy/beam
! Clean residual mean=0.000077 rms=0.003508 Jy/beam
! Combined flux in latest and established models = 2.56952 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 215 components and 2.56952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085533Jy  sigma=0.789186
! Fit after  self-cal, rms=0.085521Jy  sigma=0.789026
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7358 mas, bmaj=2.924 mas, bpa=51.94 degrees
! Estimated noise=1.367 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7358 x 2.924 at 51.94 degrees (North through East)
! Clean map  min=-0.010483  max=1.9075 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085521Jy  sigma=0.789026
! Fit after  self-cal, rms=0.077122Jy  sigma=0.679469
! Inverting map and beam 
! Estimated beam: bmin=0.736 mas, bmaj=2.924 mas, bpa=51.95 degrees
! Estimated noise=1.36794 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204766 Jy
! Component: 100  -  total flux cleaned = 0.00316879 Jy
! Component: 150  -  total flux cleaned = 0.00405355 Jy
! Component: 200  -  total flux cleaned = 0.00466767 Jy
! Total flux subtracted in 200 components = 0.00466767 Jy
! Clean residual min=-0.006363 max=0.006109 Jy/beam
! Clean residual mean=0.000033 rms=0.001618 Jy/beam
! Combined flux in latest and established models = 2.57419 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 238 components and 2.57419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076737Jy  sigma=0.675845
! Fit after  self-cal, rms=0.076704Jy  sigma=0.675754
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000427069 Jy
! Component: 100  -  total flux cleaned = 3.76101e-05 Jy
! Component: 150  -  total flux cleaned = 0.000215952 Jy
! Component: 200  -  total flux cleaned = 0.000218662 Jy
! Total flux subtracted in 200 components = 0.000218662 Jy
! Clean residual min=-0.006224 max=0.006108 Jy/beam
! Clean residual mean=0.000033 rms=0.001579 Jy/beam
! Combined flux in latest and established models = 2.57441 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 249 components and 2.57441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076484Jy  sigma=0.673776
! Fit after  self-cal, rms=0.076461Jy  sigma=0.673715
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076461Jy  sigma=0.673715
! Fit after  self-cal, rms=0.076467Jy  sigma=0.673478
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5961 mas, bmaj=2.67 mas, bpa=53.02 degrees
! Estimated noise=2.11662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.39367 Jy
! Component: 100  -  total flux cleaned = 1.75966 Jy
! Component: 150  -  total flux cleaned = 1.95878 Jy
! Component: 200  -  total flux cleaned = 2.08666 Jy
! Total flux subtracted in 200 components = 2.08666 Jy
! Clean residual min=-0.046043 max=0.071396 Jy/beam
! Clean residual mean=0.000004 rms=0.011826 Jy/beam
! Combined flux in latest and established models = 2.08666 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 2.08666 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7359 mas, bmaj=2.924 mas, bpa=51.95 degrees
! Estimated noise=1.36802 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.144646 Jy
! Component: 100  -  total flux cleaned = 0.227805 Jy
! Component: 150  -  total flux cleaned = 0.279865 Jy
! Component: 200  -  total flux cleaned = 0.314236 Jy
! Total flux subtracted in 200 components = 0.314236 Jy
! Clean residual min=-0.019253 max=0.023564 Jy/beam
! Clean residual mean=0.000050 rms=0.004975 Jy/beam
! Combined flux in latest and established models = 2.40089 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 37 components and 2.40089 Jy
! Inverting map 
! Added new window around map position (-16.8, -27.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0262837 Jy
! Component: 100  -  total flux cleaned = 0.0459794 Jy
! Component: 150  -  total flux cleaned = 0.0595334 Jy
! Component: 200  -  total flux cleaned = 0.0701165 Jy
! Total flux subtracted in 200 components = 0.0701165 Jy
! Clean residual min=-0.012739 max=0.012923 Jy/beam
! Clean residual mean=0.000048 rms=0.003234 Jy/beam
! Combined flux in latest and established models = 2.47101 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 60 components and 2.47101 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.849 mas, bmaj=4.184 mas, bpa=43.35 degrees
! Estimated noise=2.02617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162021 Jy
! Component: 100  -  total flux cleaned = 0.0264403 Jy
! Component: 150  -  total flux cleaned = 0.0361301 Jy
! Component: 200  -  total flux cleaned = 0.0450844 Jy
! Total flux subtracted in 200 components = 0.0450844 Jy
! Clean residual min=-0.013296 max=0.012574 Jy/beam
! Clean residual mean=0.000090 rms=0.004117 Jy/beam
! Combined flux in latest and established models = 2.51609 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00629289 Jy
! Component: 100  -  total flux cleaned = 0.00996396 Jy
! Component: 150  -  total flux cleaned = 0.013007 Jy
! Component: 200  -  total flux cleaned = 0.0157595 Jy
! Total flux subtracted in 200 components = 0.0157595 Jy
! Clean residual min=-0.011568 max=0.011489 Jy/beam
! Clean residual mean=0.000079 rms=0.003526 Jy/beam
! Combined flux in latest and established models = 2.53185 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 134 components and 2.53185 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7359 mas, bmaj=2.924 mas, bpa=51.95 degrees
! Estimated noise=1.36802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00706242 Jy
! Component: 100  -  total flux cleaned = 0.00888703 Jy
! Component: 150  -  total flux cleaned = 0.0114056 Jy
! Component: 200  -  total flux cleaned = 0.0133379 Jy
! Total flux subtracted in 200 components = 0.0133379 Jy
! Clean residual min=-0.008551 max=0.008277 Jy/beam
! Clean residual mean=0.000029 rms=0.001907 Jy/beam
! Combined flux in latest and established models = 2.54519 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 159 components and 2.54519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079069Jy  sigma=0.703506
! Fit after  self-cal, rms=0.078958Jy  sigma=0.699847
wmodel /J1800+7828_X_map.mod
! wmodel: Unable to open new model file: /J1800+7828_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1800+7828_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7359 x 2.924 at 51.95 degrees (North through East)
! Clean map  min=-0.010962  max=1.899 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1800+7828_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.899 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00188094 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.297146 0.297146 0.594292 1.18858 2.37717 4.75434 9.50868 19.0174 38.0347 76.0694
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0056 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.899 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1009.6 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1800+7828_X_dfm.log closed on Thu May 19 23:32:38 2016