! Started logfile: /scr/pima/bg219i_uvs/J1751-1950_S_dfm.log on Thu May 19 23:32:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1751-1950_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1751-1950_S_uva.fits
! AN table 1: 71 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.627767 visibilities/baseline/integration-bin.
! Found source: J1751-1950
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4992 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1751-1950_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 128 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001792Jy  sigma=21.010504
! Fit after  self-cal, rms=0.938182Jy  sigma=19.769035
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.87 mas, bmaj=19.5 mas, bpa=9.797 degrees
! Estimated noise=0.683538 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0494187 Jy
! Component: 100  -  total flux cleaned = 0.0610445 Jy
! Total flux subtracted in 100 components = 0.0610445 Jy
! Clean residual min=-0.002926 max=0.004636 Jy/beam
! Clean residual mean=-0.000020 rms=0.001112 Jy/beam
! Combined flux in latest and established models = 0.0610445 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0610445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060556Jy  sigma=1.238190
! Fit after  self-cal, rms=0.059672Jy  sigma=1.219709
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.53 mas, bmaj=21.5 mas, bpa=10.46 degrees
! Estimated noise=0.511734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00633995 Jy
! Component: 100  -  total flux cleaned = 0.00982597 Jy
! Component: 150  -  total flux cleaned = 0.0119614 Jy
! Component: 200  -  total flux cleaned = 0.0134535 Jy
! Total flux subtracted in 200 components = 0.0134535 Jy
! Clean residual min=-0.002400 max=0.001509 Jy/beam
! Clean residual mean=-0.000014 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.074498 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 98 components and 0.0744979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058987Jy  sigma=1.205220
! Fit after  self-cal, rms=0.058939Jy  sigma=1.204145
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.53 x 21.5 at 10.46 degrees (North through East)
! Clean map  min=-0.0024961  max=0.064886 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.00*    KP        0.99     
!   LA        0.97     NL        1.18     OV        1.05     PT        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.07     HN        1.00*    KP        1.01     
!   LA        0.97     NL        1.03     OV        1.00     PT        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.00*    KP        1.01     
!   LA        1.00     NL        0.88     OV        1.02     PT        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.00*    KP        1.02     
!   LA        1.03     NL        1.10     OV        0.92     PT        0.94     
! 
! 
! Fit before self-cal, rms=0.058939Jy  sigma=1.204145
! Fit after  self-cal, rms=0.058769Jy  sigma=1.200443
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.56 mas, bmaj=21.71 mas, bpa=10.49 degrees
! Estimated noise=0.507052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000943435 Jy
! Component: 100  -  total flux cleaned = 0.00122573 Jy
! Component: 150  -  total flux cleaned = 0.00129046 Jy
! Component: 200  -  total flux cleaned = 0.00135912 Jy
! Total flux subtracted in 200 components = 0.00135912 Jy
! Clean residual min=-0.001612 max=0.001619 Jy/beam
! Clean residual mean=0.000001 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0758571 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 138 components and 0.0758571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058747Jy  sigma=1.200177
! Fit after  self-cal, rms=0.058830Jy  sigma=1.199827
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058830Jy  sigma=1.199827
! Fit after  self-cal, rms=0.059021Jy  sigma=1.197609
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.54 mas, bmaj=21.68 mas, bpa=10.32 degrees
! Estimated noise=0.507588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000577894 Jy
! Component: 100  -  total flux cleaned = 0.000685274 Jy
! Component: 150  -  total flux cleaned = 0.000717062 Jy
! Component: 200  -  total flux cleaned = 0.00073514 Jy
! Total flux subtracted in 200 components = 0.00073514 Jy
! Clean residual min=-0.001577 max=0.001500 Jy/beam
! Clean residual mean=-0.000001 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0765922 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 155 components and 0.0765922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059012Jy  sigma=1.197509
! Fit after  self-cal, rms=0.059028Jy  sigma=1.197331
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.92859e-05 Jy
! Component: 100  -  total flux cleaned = 0.000114737 Jy
! Component: 150  -  total flux cleaned = 0.00011475 Jy
! Component: 200  -  total flux cleaned = 0.000128625 Jy
! Total flux subtracted in 200 components = 0.000128625 Jy
! Clean residual min=-0.001625 max=0.001511 Jy/beam
! Clean residual mean=-0.000001 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.0767208 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 174 components and 0.0767208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059024Jy  sigma=1.197295
! Fit after  self-cal, rms=0.059024Jy  sigma=1.197287
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059024Jy  sigma=1.197287
! Fit after  self-cal, rms=0.059080Jy  sigma=1.197101
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.52 mas, bmaj=21.66 mas, bpa=10.14 degrees
! Estimated noise=0.507079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202579 Jy
! Component: 100  -  total flux cleaned = 0.000256649 Jy
! Component: 150  -  total flux cleaned = 0.00029652 Jy
! Component: 200  -  total flux cleaned = 0.000325598 Jy
! Total flux subtracted in 200 components = 0.000325598 Jy
! Clean residual min=-0.001569 max=0.001511 Jy/beam
! Clean residual mean=-0.000001 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.0770464 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 187 components and 0.0770465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059075Jy  sigma=1.197051
! Fit after  self-cal, rms=0.059083Jy  sigma=1.197023
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.83872e-07 Jy
! Component: 100  -  total flux cleaned = 2.91277e-05 Jy
! Component: 150  -  total flux cleaned = 2.88316e-05 Jy
! Component: 200  -  total flux cleaned = 3.50841e-05 Jy
! Total flux subtracted in 200 components = 3.50841e-05 Jy
! Clean residual min=-0.001579 max=0.001505 Jy/beam
! Clean residual mean=-0.000001 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.0770815 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 200 components and 0.0770815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059081Jy  sigma=1.196991
! Fit after  self-cal, rms=0.059081Jy  sigma=1.196985
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059081Jy  sigma=1.196985
! Fit after  self-cal, rms=0.059051Jy  sigma=1.196966
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.15 mas, bmaj=22.54 mas, bpa=10.91 degrees
! Estimated noise=0.510031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.4656e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100201 Jy
! Component: 150  -  total flux cleaned = 0.000111754 Jy
! Component: 200  -  total flux cleaned = 0.000111717 Jy
! Total flux subtracted in 200 components = 0.000111717 Jy
! Clean residual min=-0.001549 max=0.001412 Jy/beam
! Clean residual mean=-0.000001 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0771932 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 206 components and 0.0771932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059049Jy  sigma=1.196935
! Fit after  self-cal, rms=0.059050Jy  sigma=1.196929
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.58648e-05 Jy
! Component: 100  -  total flux cleaned = -4.72924e-05 Jy
! Component: 150  -  total flux cleaned = -4.19229e-05 Jy
! Component: 200  -  total flux cleaned = -4.7127e-05 Jy
! Total flux subtracted in 200 components = -4.7127e-05 Jy
! Clean residual min=-0.001544 max=0.001404 Jy/beam
! Clean residual mean=-0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0771461 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 211 components and 0.0771461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059049Jy  sigma=1.196903
! Fit after  self-cal, rms=0.059049Jy  sigma=1.196899
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=11.5 mas, bmaj=21.65 mas, bpa=9.972 degrees
! Estimated noise=0.506719 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.5 x 21.65 at 9.972 degrees (North through East)
! Clean map  min=-0.001575  max=0.064431 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.84 mas, bmaj=19.68 mas, bpa=9.349 degrees
! Estimated noise=0.679204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0495314 Jy
! Component: 100  -  total flux cleaned = 0.0617733 Jy
! Component: 150  -  total flux cleaned = 0.0678166 Jy
! Component: 200  -  total flux cleaned = 0.071383 Jy
! Total flux subtracted in 200 components = 0.071383 Jy
! Clean residual min=-0.002569 max=0.002206 Jy/beam
! Clean residual mean=-0.000012 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.071383 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.071383 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.5 mas, bmaj=21.65 mas, bpa=9.972 degrees
! Estimated noise=0.506719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220153 Jy
! Component: 100  -  total flux cleaned = 0.00347034 Jy
! Component: 150  -  total flux cleaned = 0.00427855 Jy
! Component: 200  -  total flux cleaned = 0.00484862 Jy
! Total flux subtracted in 200 components = 0.00484862 Jy
! Clean residual min=-0.001653 max=0.001474 Jy/beam
! Clean residual mean=-0.000003 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.0762316 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 82 components and 0.0762316 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.15 mas, bmaj=22.54 mas, bpa=10.91 degrees
! Estimated noise=0.510031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397363 Jy
! Component: 100  -  total flux cleaned = 0.000653509 Jy
! Component: 150  -  total flux cleaned = 0.000741074 Jy
! Component: 200  -  total flux cleaned = 0.000779722 Jy
! Total flux subtracted in 200 components = 0.000779722 Jy
! Clean residual min=-0.001594 max=0.001423 Jy/beam
! Clean residual mean=-0.000001 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.0770113 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51865e-05 Jy
! Component: 100  -  total flux cleaned = 6.16003e-05 Jy
! Component: 150  -  total flux cleaned = 6.759e-05 Jy
! Component: 200  -  total flux cleaned = 7.34413e-05 Jy
! Total flux subtracted in 200 components = 7.34413e-05 Jy
! Clean residual min=-0.001589 max=0.001410 Jy/beam
! Clean residual mean=-0.000001 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0770848 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 112 components and 0.0770848 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.5 mas, bmaj=21.65 mas, bpa=9.972 degrees
! Estimated noise=0.506719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.19128e-05 Jy
! Component: 100  -  total flux cleaned = 7.83911e-05 Jy
! Component: 150  -  total flux cleaned = 7.81303e-05 Jy
! Component: 200  -  total flux cleaned = 7.8001e-05 Jy
! Total flux subtracted in 200 components = 7.8001e-05 Jy
! Clean residual min=-0.001608 max=0.001498 Jy/beam
! Clean residual mean=-0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0771628 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 120 components and 0.0771628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059050Jy  sigma=1.196917
! Fit after  self-cal, rms=0.059047Jy  sigma=1.196904
wmodel /J1751-1950_S_map.mod
! wmodel: Unable to open new model file: /J1751-1950_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1751-1950_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.5 x 21.65 at 9.972 degrees (North through East)
! Clean map  min=-0.0016035  max=0.064299 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1751-1950_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0642989 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000434725 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.0283 2.0283 4.0566 8.1132 16.2264 32.4528 64.9056
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.064 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  147.907 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1751-1950_S_dfm.log closed on Thu May 19 23:32:26 2016