! Started logfile: /scr/pima/bg219i_uvs/J1742-1517_X_dfm.log on Thu May 19 23:31:49 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1742-1517_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1742-1517_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.774468 visibilities/baseline/integration-bin.
! Found source: J1742-1517
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19656 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1742-1517_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005518Jy  sigma=24.766801
! Fit after  self-cal, rms=0.891175Jy  sigma=21.933091
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6381 mas, bmaj=1.644 mas, bpa=-1.187 degrees
! Estimated noise=0.394057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0851311 Jy
! Component: 100  -  total flux cleaned = 0.103825 Jy
! Total flux subtracted in 100 components = 0.103825 Jy
! Clean residual min=-0.005900 max=0.011241 Jy/beam
! Clean residual mean=0.000005 rms=0.001481 Jy/beam
! Combined flux in latest and established models = 0.103825 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.103825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069371Jy  sigma=1.609607
! Fit after  self-cal, rms=0.069090Jy  sigma=1.602605
! Inverting map 
! Added new window around map position (-5, 39.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112062 Jy
! Component: 100  -  total flux cleaned = 0.0187241 Jy
! Total flux subtracted in 100 components = 0.0187241 Jy
! Clean residual min=-0.004667 max=0.008089 Jy/beam
! Clean residual mean=0.000003 rms=0.001160 Jy/beam
! Combined flux in latest and established models = 0.122549 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 25 components and 0.122549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066071Jy  sigma=1.514502
! Fit after  self-cal, rms=0.065813Jy  sigma=1.509957
! Inverting map 
! Added new window around map position (-6.2, 39.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00856847 Jy
! Component: 100  -  total flux cleaned = 0.0144025 Jy
! Total flux subtracted in 100 components = 0.0144025 Jy
! Clean residual min=-0.003835 max=0.004102 Jy/beam
! Clean residual mean=0.000003 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 0.136951 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 43 components and 0.136951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063883Jy  sigma=1.455181
! Fit after  self-cal, rms=0.063725Jy  sigma=1.452304
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8351 mas, bmaj=2.062 mas, bpa=-1.51 degrees
! Estimated noise=0.212912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00859472 Jy
! Component: 100  -  total flux cleaned = 0.0141592 Jy
! Component: 150  -  total flux cleaned = 0.0181524 Jy
! Component: 200  -  total flux cleaned = 0.0211141 Jy
! Total flux subtracted in 200 components = 0.0211141 Jy
! Clean residual min=-0.003059 max=0.003873 Jy/beam
! Clean residual mean=0.000005 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.158065 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 67 components and 0.158065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062405Jy  sigma=1.414291
! Fit after  self-cal, rms=0.062259Jy  sigma=1.410860
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8351 x 2.062 at -1.51 degrees (North through East)
! Clean map  min=-0.0030076  max=0.11101 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.06     KP        0.99     
!   LA        0.96     MK        1.03     NL        1.00     OV        0.96     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.01     KP        0.94     
!   LA        1.02     MK        1.03     NL        1.02     OV        0.95     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        1.00     KP        1.01     
!   LA        0.96     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.02     KP        0.95     
!   LA        1.04     MK        1.01     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.05     KP        0.96     
!   LA        0.96     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.08     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.03     OV        0.95     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.98     
!   LA        1.00     MK        0.98     NL        1.00     OV        0.94     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.05     KP        0.96     
!   LA        1.00     MK        0.98     NL        0.99     OV        0.92     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.96     MK        0.97     NL        0.97     OV        0.98     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.05     KP        0.98     
!   LA        0.97     MK        1.05     NL        0.98     OV        0.96     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.01     KP        0.98     
!   LA        0.97     MK        0.99     NL        1.04     OV        0.96     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        0.94     KP        0.96     
!   LA        1.03     MK        1.00     NL        0.99     OV        0.93     
!   PT        0.98     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.062259Jy  sigma=1.410860
! Fit after  self-cal, rms=0.061456Jy  sigma=1.404786
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8425 mas, bmaj=2.076 mas, bpa=-1.563 degrees
! Estimated noise=0.208924 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249854 Jy
! Component: 100  -  total flux cleaned = 0.00386227 Jy
! Component: 150  -  total flux cleaned = 0.00436442 Jy
! Component: 200  -  total flux cleaned = 0.0046354 Jy
! Total flux subtracted in 200 components = 0.0046354 Jy
! Clean residual min=-0.002514 max=0.003378 Jy/beam
! Clean residual mean=0.000004 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.162701 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.162701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061348Jy  sigma=1.401374
! Fit after  self-cal, rms=0.061360Jy  sigma=1.400619
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061360Jy  sigma=1.400619
! Fit after  self-cal, rms=0.061449Jy  sigma=1.397332
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8414 mas, bmaj=2.074 mas, bpa=-1.5 degrees
! Estimated noise=0.209302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119236 Jy
! Component: 100  -  total flux cleaned = 0.00146921 Jy
! Component: 150  -  total flux cleaned = 0.00162575 Jy
! Component: 200  -  total flux cleaned = 0.00172598 Jy
! Total flux subtracted in 200 components = 0.00172598 Jy
! Clean residual min=-0.002371 max=0.003268 Jy/beam
! Clean residual mean=0.000004 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.164427 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 0.164427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061425Jy  sigma=1.396520
! Fit after  self-cal, rms=0.061425Jy  sigma=1.396324
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.8, 30.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00351156 Jy
! Component: 100  -  total flux cleaned = 0.00569392 Jy
! Component: 150  -  total flux cleaned = 0.0071728 Jy
! Component: 200  -  total flux cleaned = 0.00824274 Jy
! Total flux subtracted in 200 components = 0.00824274 Jy
! Clean residual min=-0.002067 max=0.002321 Jy/beam
! Clean residual mean=0.000003 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.172669 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 114 components and 0.172669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061210Jy  sigma=1.389853
! Fit after  self-cal, rms=0.061190Jy  sigma=1.389315
! Inverting map 
! Added new window around map position (-3.6, 38.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213456 Jy
! Component: 100  -  total flux cleaned = 0.00327231 Jy
! Component: 150  -  total flux cleaned = 0.00421243 Jy
! Component: 200  -  total flux cleaned = 0.00503341 Jy
! Total flux subtracted in 200 components = 0.00503341 Jy
! Clean residual min=-0.001789 max=0.002218 Jy/beam
! Clean residual mean=0.000001 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.177703 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 128 components and 0.177703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061108Jy  sigma=1.386868
! Fit after  self-cal, rms=0.061098Jy  sigma=1.386552
! Inverting map 
! Added new window around map position (-8.2, 36.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206134 Jy
! Component: 100  -  total flux cleaned = 0.00330242 Jy
! Component: 150  -  total flux cleaned = 0.00429029 Jy
! Component: 200  -  total flux cleaned = 0.00514641 Jy
! Total flux subtracted in 200 components = 0.00514641 Jy
! Clean residual min=-0.001499 max=0.001664 Jy/beam
! Clean residual mean=0.000001 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.182849 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 159 components and 0.182849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061017Jy  sigma=1.384187
! Fit after  self-cal, rms=0.061004Jy  sigma=1.383933
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061004Jy  sigma=1.383933
! Fit after  self-cal, rms=0.060956Jy  sigma=1.383229
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8434 mas, bmaj=2.077 mas, bpa=-1.461 degrees
! Estimated noise=0.208849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011584 Jy
! Component: 100  -  total flux cleaned = 0.0020422 Jy
! Component: 150  -  total flux cleaned = 0.0028101 Jy
! Component: 200  -  total flux cleaned = 0.00338032 Jy
! Total flux subtracted in 200 components = 0.00338032 Jy
! Clean residual min=-0.001389 max=0.001467 Jy/beam
! Clean residual mean=0.000001 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.18623 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 177 components and 0.18623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060923Jy  sigma=1.382229
! Fit after  self-cal, rms=0.060925Jy  sigma=1.382140
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000730557 Jy
! Component: 100  -  total flux cleaned = 0.00112558 Jy
! Component: 150  -  total flux cleaned = 0.00148402 Jy
! Component: 200  -  total flux cleaned = 0.00179491 Jy
! Total flux subtracted in 200 components = 0.00179491 Jy
! Clean residual min=-0.001331 max=0.001393 Jy/beam
! Clean residual mean=0.000000 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.188024 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 189 components and 0.188024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060909Jy  sigma=1.381681
! Fit after  self-cal, rms=0.060908Jy  sigma=1.381659
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060908Jy  sigma=1.381659
! Fit after  self-cal, rms=0.060942Jy  sigma=1.381552
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.213 mas, bmaj=4.497 mas, bpa=3.209 degrees
! Estimated noise=0.262146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102702 Jy
! Component: 100  -  total flux cleaned = 0.00172659 Jy
! Component: 150  -  total flux cleaned = 0.00226962 Jy
! Component: 200  -  total flux cleaned = 0.00265654 Jy
! Total flux subtracted in 200 components = 0.00265654 Jy
! Clean residual min=-0.001755 max=0.001625 Jy/beam
! Clean residual mean=0.000000 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.190681 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 209 components and 0.190681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060936Jy  sigma=1.381223
! Fit after  self-cal, rms=0.060935Jy  sigma=1.381183
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474395 Jy
! Component: 100  -  total flux cleaned = 0.000742034 Jy
! Component: 150  -  total flux cleaned = 0.000984132 Jy
! Component: 200  -  total flux cleaned = 0.00117706 Jy
! Total flux subtracted in 200 components = 0.00117706 Jy
! Clean residual min=-0.001710 max=0.001612 Jy/beam
! Clean residual mean=-0.000000 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.191858 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 216 components and 0.191858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060934Jy  sigma=1.381090
! Fit after  self-cal, rms=0.060934Jy  sigma=1.381085
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8441 mas, bmaj=2.077 mas, bpa=-1.435 degrees
! Estimated noise=0.209004 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8441 x 2.077 at -1.435 degrees (North through East)
! Clean map  min=-0.0012125  max=0.10931 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6437 mas, bmaj=1.651 mas, bpa=-1.119 degrees
! Estimated noise=0.390014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0842856 Jy
! Component: 100  -  total flux cleaned = 0.10502 Jy
! Component: 150  -  total flux cleaned = 0.116987 Jy
! Component: 200  -  total flux cleaned = 0.125723 Jy
! Total flux subtracted in 200 components = 0.125723 Jy
! Clean residual min=-0.003626 max=0.005183 Jy/beam
! Clean residual mean=0.000003 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.125723 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.125723 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8441 mas, bmaj=2.077 mas, bpa=-1.435 degrees
! Estimated noise=0.209004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.6, 39.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120599 Jy
! Component: 100  -  total flux cleaned = 0.0198345 Jy
! Component: 150  -  total flux cleaned = 0.0255552 Jy
! Component: 200  -  total flux cleaned = 0.0301212 Jy
! Total flux subtracted in 200 components = 0.0301212 Jy
! Clean residual min=-0.002786 max=0.003974 Jy/beam
! Clean residual mean=0.000003 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.155844 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 91 components and 0.155844 Jy
! Inverting map 
! Added new window around map position (2.2, 21.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427182 Jy
! Component: 100  -  total flux cleaned = 0.00747312 Jy
! Component: 150  -  total flux cleaned = 0.0101933 Jy
! Component: 200  -  total flux cleaned = 0.0125586 Jy
! Total flux subtracted in 200 components = 0.0125586 Jy
! Clean residual min=-0.002015 max=0.002072 Jy/beam
! Clean residual mean=0.000003 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.168403 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 146 components and 0.168403 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.213 mas, bmaj=4.497 mas, bpa=3.209 degrees
! Estimated noise=0.262146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00363832 Jy
! Component: 100  -  total flux cleaned = 0.00639494 Jy
! Component: 150  -  total flux cleaned = 0.0086721 Jy
! Component: 200  -  total flux cleaned = 0.0105849 Jy
! Total flux subtracted in 200 components = 0.0105849 Jy
! Clean residual min=-0.002452 max=0.001962 Jy/beam
! Clean residual mean=0.000002 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.178988 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162428 Jy
! Component: 100  -  total flux cleaned = 0.00301179 Jy
! Component: 150  -  total flux cleaned = 0.004204 Jy
! Component: 200  -  total flux cleaned = 0.00523126 Jy
! Total flux subtracted in 200 components = 0.00523126 Jy
! Clean residual min=-0.002230 max=0.001844 Jy/beam
! Clean residual mean=0.000001 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.184219 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 224 components and 0.184219 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8441 mas, bmaj=2.077 mas, bpa=-1.435 degrees
! Estimated noise=0.209004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000748846 Jy
! Component: 100  -  total flux cleaned = 0.00134666 Jy
! Component: 150  -  total flux cleaned = 0.0018773 Jy
! Component: 200  -  total flux cleaned = 0.00224045 Jy
! Total flux subtracted in 200 components = 0.00224045 Jy
! Clean residual min=-0.001422 max=0.001422 Jy/beam
! Clean residual mean=0.000000 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.186459 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 245 components and 0.186459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060953Jy  sigma=1.381816
! Fit after  self-cal, rms=0.060938Jy  sigma=1.381460
wmodel /J1742-1517_X_map.mod
! wmodel: Unable to open new model file: /J1742-1517_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1742-1517_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8441 x 2.077 at -1.435 degrees (North through East)
! Clean map  min=-0.001304  max=0.10833 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1742-1517_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.108335 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000340083 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.941757 0.941757 1.88351 3.76703 7.53406 15.0681 30.1362 60.2724
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.108 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  318.553 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1742-1517_X_dfm.log closed on Thu May 19 23:31:52 2016