! Started logfile: /scr/pima/bg219i_uvs/J1742-1517_S_dfm.log on Thu May 19 23:31:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1742-1517_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1742-1517_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.853428 visibilities/baseline/integration-bin.
! Found source: J1742-1517
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7220 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1742-1517_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014655Jy  sigma=22.770737
! Fit after  self-cal, rms=0.919191Jy  sigma=20.630168
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.428 mas, bmaj=6.636 mas, bpa=-1.309 degrees
! Estimated noise=0.575931 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.057893 Jy
! Component: 100  -  total flux cleaned = 0.0791437 Jy
! Total flux subtracted in 100 components = 0.0791437 Jy
! Clean residual min=-0.011579 max=0.035314 Jy/beam
! Clean residual mean=-0.000031 rms=0.003333 Jy/beam
! Combined flux in latest and established models = 0.0791436 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0791436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103512Jy  sigma=2.234738
! Fit after  self-cal, rms=0.100723Jy  sigma=2.183731
! Inverting map 
! Added new window around map position (5.5, -39).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0376065 Jy
! Component: 100  -  total flux cleaned = 0.0546821 Jy
! Total flux subtracted in 100 components = 0.0546821 Jy
! Clean residual min=-0.008501 max=0.012044 Jy/beam
! Clean residual mean=-0.000019 rms=0.002406 Jy/beam
! Combined flux in latest and established models = 0.133826 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 0.133826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084031Jy  sigma=1.806356
! Fit after  self-cal, rms=0.078900Jy  sigma=1.706300
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202614 Jy
! Component: 100  -  total flux cleaned = 0.0329244 Jy
! Total flux subtracted in 100 components = 0.0329244 Jy
! Clean residual min=-0.007001 max=0.012031 Jy/beam
! Clean residual mean=-0.000011 rms=0.001912 Jy/beam
! Combined flux in latest and established models = 0.16675 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.16675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071875Jy  sigma=1.552402
! Fit after  self-cal, rms=0.071578Jy  sigma=1.546532
! Inverting map 
! Added new window around map position (0.5, -9.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129835 Jy
! Component: 100  -  total flux cleaned = 0.0215655 Jy
! Total flux subtracted in 100 components = 0.0215655 Jy
! Clean residual min=-0.005749 max=0.009833 Jy/beam
! Clean residual mean=-0.000006 rms=0.001501 Jy/beam
! Combined flux in latest and established models = 0.188316 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 68 components and 0.188316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067701Jy  sigma=1.460349
! Fit after  self-cal, rms=0.067446Jy  sigma=1.455163
! Inverting map 
! Added new window around map position (2.5, -19.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00913668 Jy
! Component: 100  -  total flux cleaned = 0.0155374 Jy
! Total flux subtracted in 100 components = 0.0155374 Jy
! Clean residual min=-0.004416 max=0.005662 Jy/beam
! Clean residual mean=-0.000003 rms=0.001207 Jy/beam
! Combined flux in latest and established models = 0.203853 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 86 components and 0.203853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065382Jy  sigma=1.409210
! Fit after  self-cal, rms=0.065314Jy  sigma=1.407923
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.049 mas, bmaj=7.916 mas, bpa=-3.288 degrees
! Estimated noise=0.387411 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00906573 Jy
! Component: 100  -  total flux cleaned = 0.015429 Jy
! Component: 150  -  total flux cleaned = 0.0203046 Jy
! Component: 200  -  total flux cleaned = 0.0241741 Jy
! Total flux subtracted in 200 components = 0.0241741 Jy
! Clean residual min=-0.003567 max=0.004384 Jy/beam
! Clean residual mean=-0.000004 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.228027 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 126 components and 0.228027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063603Jy  sigma=1.370244
! Fit after  self-cal, rms=0.063559Jy  sigma=1.369315
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.049 x 7.916 at -3.288 degrees (North through East)
! Clean map  min=-0.003269  max=0.07969 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.84     HN        1.13     KP        0.97     
!   LA        0.97     MK        1.07     NL        0.99     OV        0.96     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.15     KP        0.98     
!   LA        0.99     MK        1.04     NL        0.97     OV        1.01     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.17     KP        1.01     
!   LA        0.95     MK        1.04     NL        0.99     OV        1.00     
!   PT        0.92     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.15     KP        0.95     
!   LA        0.99     MK        0.95     NL        1.03     OV        0.98     
!   PT        0.93     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.063559Jy  sigma=1.369315
! Fit after  self-cal, rms=0.062578Jy  sigma=1.355817
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.11 mas, bmaj=8.011 mas, bpa=-3.329 degrees
! Estimated noise=0.38133 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354354 Jy
! Component: 100  -  total flux cleaned = 0.000914656 Jy
! Component: 150  -  total flux cleaned = 0.00134613 Jy
! Component: 200  -  total flux cleaned = 0.00163131 Jy
! Total flux subtracted in 200 components = 0.00163131 Jy
! Clean residual min=-0.002428 max=0.002577 Jy/beam
! Clean residual mean=0.000001 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.229658 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 135 components and 0.229658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062494Jy  sigma=1.354097
! Fit after  self-cal, rms=0.062520Jy  sigma=1.353771
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062520Jy  sigma=1.353771
! Fit after  self-cal, rms=0.062113Jy  sigma=1.348074
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.118 mas, bmaj=8.026 mas, bpa=-3.142 degrees
! Estimated noise=0.381206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102647 Jy
! Component: 100  -  total flux cleaned = 0.000308242 Jy
! Component: 150  -  total flux cleaned = 0.00040878 Jy
! Component: 200  -  total flux cleaned = 0.00045202 Jy
! Total flux subtracted in 200 components = 0.00045202 Jy
! Clean residual min=-0.002013 max=0.002210 Jy/beam
! Clean residual mean=-0.000003 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.23011 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 144 components and 0.23011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062086Jy  sigma=1.347606
! Fit after  self-cal, rms=0.062080Jy  sigma=1.347474
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.46727e-05 Jy
! Component: 100  -  total flux cleaned = 0.000108763 Jy
! Component: 150  -  total flux cleaned = 0.000149424 Jy
! Component: 200  -  total flux cleaned = 0.000187367 Jy
! Total flux subtracted in 200 components = 0.000187367 Jy
! Clean residual min=-0.001985 max=0.002230 Jy/beam
! Clean residual mean=-0.000003 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.230298 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 145 components and 0.230298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062064Jy  sigma=1.347218
! Fit after  self-cal, rms=0.062062Jy  sigma=1.347191
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062062Jy  sigma=1.347191
! Fit after  self-cal, rms=0.062053Jy  sigma=1.346874
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.122 mas, bmaj=8.039 mas, bpa=-3.147 degrees
! Estimated noise=0.380935 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.66803e-05 Jy
! Component: 100  -  total flux cleaned = -6.80386e-05 Jy
! Component: 150  -  total flux cleaned = -6.8335e-05 Jy
! Component: 200  -  total flux cleaned = -6.84714e-05 Jy
! Total flux subtracted in 200 components = -6.84714e-05 Jy
! Clean residual min=-0.001986 max=0.002269 Jy/beam
! Clean residual mean=-0.000005 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.230229 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 149 components and 0.230229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062040Jy  sigma=1.346640
! Fit after  self-cal, rms=0.062040Jy  sigma=1.346617
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.46199e-05 Jy
! Component: 100  -  total flux cleaned = 6.32266e-06 Jy
! Component: 150  -  total flux cleaned = 6.28506e-06 Jy
! Component: 200  -  total flux cleaned = 6.17631e-06 Jy
! Total flux subtracted in 200 components = 6.17631e-06 Jy
! Clean residual min=-0.001984 max=0.002267 Jy/beam
! Clean residual mean=-0.000005 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.230236 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 150 components and 0.230236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062030Jy  sigma=1.346448
! Fit after  self-cal, rms=0.062030Jy  sigma=1.346436
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062030Jy  sigma=1.346436
! Fit after  self-cal, rms=0.062045Jy  sigma=1.346411
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.123 mas, bmaj=16.69 mas, bpa=2.886 degrees
! Estimated noise=0.477142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000626395 Jy
! Component: 100  -  total flux cleaned = 0.000475386 Jy
! Component: 150  -  total flux cleaned = 0.000350049 Jy
! Component: 200  -  total flux cleaned = 0.000386411 Jy
! Total flux subtracted in 200 components = 0.000386411 Jy
! Clean residual min=-0.002335 max=0.001994 Jy/beam
! Clean residual mean=-0.000010 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.230622 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 158 components and 0.230622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062056Jy  sigma=1.346392
! Fit after  self-cal, rms=0.062055Jy  sigma=1.346356
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.08292e-05 Jy
! Component: 100  -  total flux cleaned = 9.34383e-06 Jy
! Component: 150  -  total flux cleaned = 4.10713e-05 Jy
! Component: 200  -  total flux cleaned = 8.79349e-05 Jy
! Total flux subtracted in 200 components = 8.79349e-05 Jy
! Clean residual min=-0.002314 max=0.001978 Jy/beam
! Clean residual mean=-0.000010 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.23071 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 160 components and 0.23071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062063Jy  sigma=1.346458
! Fit after  self-cal, rms=0.062062Jy  sigma=1.346445
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.125 mas, bmaj=8.048 mas, bpa=-3.154 degrees
! Estimated noise=0.38092 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.125 x 8.048 at -3.154 degrees (North through East)
! Clean map  min=-0.0018144  max=0.07709 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.473 mas, bmaj=6.703 mas, bpa=-1.22 degrees
! Estimated noise=0.577628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0714159 Jy
! Component: 100  -  total flux cleaned = 0.109266 Jy
! Component: 150  -  total flux cleaned = 0.134751 Jy
! Component: 200  -  total flux cleaned = 0.152834 Jy
! Total flux subtracted in 200 components = 0.152834 Jy
! Clean residual min=-0.005746 max=0.010293 Jy/beam
! Clean residual mean=-0.000014 rms=0.001844 Jy/beam
! Combined flux in latest and established models = 0.152834 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.152834 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.125 mas, bmaj=8.048 mas, bpa=-3.154 degrees
! Estimated noise=0.38092 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196948 Jy
! Component: 100  -  total flux cleaned = 0.0329712 Jy
! Component: 150  -  total flux cleaned = 0.0427105 Jy
! Component: 200  -  total flux cleaned = 0.0500244 Jy
! Total flux subtracted in 200 components = 0.0500244 Jy
! Clean residual min=-0.003387 max=0.005575 Jy/beam
! Clean residual mean=-0.000016 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.202858 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 111 components and 0.202858 Jy
! Inverting map 
! Added new window around map position (5, -29.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0059749 Jy
! Component: 100  -  total flux cleaned = 0.0104093 Jy
! Component: 150  -  total flux cleaned = 0.0138915 Jy
! Component: 200  -  total flux cleaned = 0.0166585 Jy
! Total flux subtracted in 200 components = 0.0166585 Jy
! Clean residual min=-0.002276 max=0.002897 Jy/beam
! Clean residual mean=-0.000009 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.219517 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 151 components and 0.219517 Jy
! Inverting map 
! Added new window around map position (-25.5, 43.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287923 Jy
! Component: 100  -  total flux cleaned = 0.00470411 Jy
! Component: 150  -  total flux cleaned = 0.00614013 Jy
! Component: 200  -  total flux cleaned = 0.00707969 Jy
! Total flux subtracted in 200 components = 0.00707969 Jy
! Clean residual min=-0.001933 max=0.002304 Jy/beam
! Clean residual mean=-0.000005 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.226597 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 178 components and 0.226597 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.123 mas, bmaj=16.69 mas, bpa=2.886 degrees
! Estimated noise=0.477142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188834 Jy
! Component: 100  -  total flux cleaned = 0.00294853 Jy
! Component: 150  -  total flux cleaned = 0.00331945 Jy
! Component: 200  -  total flux cleaned = 0.00347256 Jy
! Total flux subtracted in 200 components = 0.00347256 Jy
! Clean residual min=-0.001952 max=0.002133 Jy/beam
! Clean residual mean=-0.000007 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.230069 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.15093e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133929 Jy
! Component: 150  -  total flux cleaned = 0.000193964 Jy
! Component: 200  -  total flux cleaned = 0.000213225 Jy
! Total flux subtracted in 200 components = 0.000213225 Jy
! Clean residual min=-0.001911 max=0.002060 Jy/beam
! Clean residual mean=-0.000007 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.230282 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 212 components and 0.230282 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.125 mas, bmaj=8.048 mas, bpa=-3.154 degrees
! Estimated noise=0.38092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000902766 Jy
! Component: 100  -  total flux cleaned = -0.000867908 Jy
! Component: 150  -  total flux cleaned = -0.000835789 Jy
! Component: 200  -  total flux cleaned = -0.000806004 Jy
! Total flux subtracted in 200 components = -0.000806004 Jy
! Clean residual min=-0.001775 max=0.002069 Jy/beam
! Clean residual mean=-0.000004 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.229476 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 229 components and 0.229476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061959Jy  sigma=1.344525
! Fit after  self-cal, rms=0.061932Jy  sigma=1.344114
wmodel /J1742-1517_S_map.mod
! wmodel: Unable to open new model file: /J1742-1517_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1742-1517_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.125 x 8.048 at -3.154 degrees (North through East)
! Clean map  min=-0.0017198  max=0.076786 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1742-1517_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0767862 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000504506 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.97108 1.97108 3.94216 7.88432 15.7686 31.5373 63.0746
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  152.2 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1742-1517_S_dfm.log closed on Thu May 19 23:31:48 2016