! Started logfile: /scr/pima/bg219i_uvs/J1733-1304_X_dfm.log on Thu May 19 23:31:09 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1733-1304_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1733-1304_X_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.760317 visibilities/baseline/integration-bin.
! Found source: J1733-1304
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5748 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1733-1304_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=3.038840Jy  sigma=42.029982
! Fit after  self-cal, rms=1.878900Jy  sigma=25.027821
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.577 mas, bmaj=1.552 mas, bpa=0.2769 degrees
! Estimated noise=1.00919 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84577 Jy
! Component: 100  -  total flux cleaned = 2.35753 Jy
! Total flux subtracted in 100 components = 2.35753 Jy
! Clean residual min=-0.111019 max=0.251913 Jy/beam
! Clean residual mean=-0.000003 rms=0.026723 Jy/beam
! Combined flux in latest and established models = 2.35753 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 2.35753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.750813Jy  sigma=9.854127
! Fit after  self-cal, rms=0.750729Jy  sigma=9.844196
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.315078 Jy
! Component: 100  -  total flux cleaned = 0.530447 Jy
! Total flux subtracted in 100 components = 0.530447 Jy
! Clean residual min=-0.073255 max=0.118205 Jy/beam
! Clean residual mean=-0.000002 rms=0.014874 Jy/beam
! Combined flux in latest and established models = 2.88798 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 2.88798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.421761Jy  sigma=5.596284
! Fit after  self-cal, rms=0.419915Jy  sigma=5.570909
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150916 Jy
! Component: 100  -  total flux cleaned = 0.254571 Jy
! Total flux subtracted in 100 components = 0.254571 Jy
! Clean residual min=-0.056534 max=0.057662 Jy/beam
! Clean residual mean=-0.000001 rms=0.010055 Jy/beam
! Combined flux in latest and established models = 3.14255 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 3.14255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.297203Jy  sigma=3.990027
! Fit after  self-cal, rms=0.296484Jy  sigma=3.976515
! Inverting map 
! Added new window around map position (0, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0736965 Jy
! Component: 100  -  total flux cleaned = 0.124333 Jy
! Total flux subtracted in 100 components = 0.124333 Jy
! Clean residual min=-0.047386 max=0.043140 Jy/beam
! Clean residual mean=-0.000001 rms=0.008331 Jy/beam
! Combined flux in latest and established models = 3.26688 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 3.26688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.259679Jy  sigma=3.496634
! Fit after  self-cal, rms=0.259371Jy  sigma=3.490701
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7517 mas, bmaj=1.78 mas, bpa=0.9628 degrees
! Estimated noise=0.76966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0576867 Jy
! Component: 100  -  total flux cleaned = 0.0856304 Jy
! Component: 150  -  total flux cleaned = 0.101156 Jy
! Component: 200  -  total flux cleaned = 0.110008 Jy
! Total flux subtracted in 200 components = 0.110008 Jy
! Clean residual min=-0.037255 max=0.043781 Jy/beam
! Clean residual mean=-0.000003 rms=0.009984 Jy/beam
! Combined flux in latest and established models = 3.37689 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 41 components and 3.37689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.246018Jy  sigma=3.306628
! Fit after  self-cal, rms=0.245609Jy  sigma=3.300290
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7517 x 1.78 at 0.9628 degrees (North through East)
! Clean map  min=-0.034605  max=2.6085 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.02     KP        0.98     
!   LA        1.06     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.04     KP        0.98     
!   LA        1.07     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.99     
!   LA        1.03     MK        1.03     NL        1.00     OV        0.95     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        1.00     
!   LA        1.12     MK        1.01     NL        0.91     OV        0.95     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        0.99     
!   LA        1.07     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        0.99     
!   LA        1.03     MK        1.01     NL        1.00     OV        0.95     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.12     MK        1.00     NL        1.01     OV        0.93     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.11     MK        1.00     NL        0.99     OV        0.95     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        1.02     
!   LA        1.07     MK        1.00     NL        0.99     OV        0.96     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        1.00     
!   LA        1.04     MK        0.98     NL        1.00     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.03     KP        1.01     
!   LA        1.03     MK        1.00     NL        0.97     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        1.04     
!   LA        1.05     MK        1.03     NL        0.97     OV        0.95     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.245609Jy  sigma=3.300290
! Fit after  self-cal, rms=0.243871Jy  sigma=2.896408
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7526 mas, bmaj=1.782 mas, bpa=1.058 degrees
! Estimated noise=0.768725 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00101342 Jy
! Component: 100  -  total flux cleaned = 1.03861e-05 Jy
! Component: 150  -  total flux cleaned = 4.11805e-07 Jy
! Component: 200  -  total flux cleaned = -0.000187029 Jy
! Total flux subtracted in 200 components = -0.000187029 Jy
! Clean residual min=-0.038158 max=0.040886 Jy/beam
! Clean residual mean=-0.000025 rms=0.008393 Jy/beam
! Combined flux in latest and established models = 3.3767 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 48 components and 3.3767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.243112Jy  sigma=2.891005
! Fit after  self-cal, rms=0.243035Jy  sigma=2.888708
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.243035Jy  sigma=2.888708
! Fit after  self-cal, rms=0.213960Jy  sigma=2.409216
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7526 mas, bmaj=1.783 mas, bpa=1.055 degrees
! Estimated noise=0.768254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00241506 Jy
! Component: 100  -  total flux cleaned = -0.00243107 Jy
! Component: 150  -  total flux cleaned = -0.00260366 Jy
! Component: 200  -  total flux cleaned = -0.00260459 Jy
! Total flux subtracted in 200 components = -0.00260459 Jy
! Clean residual min=-0.024124 max=0.035309 Jy/beam
! Clean residual mean=0.000002 rms=0.005678 Jy/beam
! Combined flux in latest and established models = 3.3741 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 50 components and 3.3741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.213265Jy  sigma=2.405177
! Fit after  self-cal, rms=0.213215Jy  sigma=2.403006
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0335639 Jy
! Component: 100  -  total flux cleaned = 0.0538242 Jy
! Component: 150  -  total flux cleaned = 0.0691869 Jy
! Component: 200  -  total flux cleaned = 0.0812141 Jy
! Total flux subtracted in 200 components = 0.0812141 Jy
! Clean residual min=-0.022069 max=0.023138 Jy/beam
! Clean residual mean=0.000003 rms=0.004507 Jy/beam
! Combined flux in latest and established models = 3.45531 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 80 components and 3.45531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.204182Jy  sigma=2.326098
! Fit after  self-cal, rms=0.203151Jy  sigma=2.316241
! Inverting map 
! Added new window around map position (-0.2, 24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0224517 Jy
! Component: 100  -  total flux cleaned = 0.0363509 Jy
! Component: 150  -  total flux cleaned = 0.0485061 Jy
! Component: 200  -  total flux cleaned = 0.0593 Jy
! Total flux subtracted in 200 components = 0.0593 Jy
! Clean residual min=-0.020460 max=0.019303 Jy/beam
! Clean residual mean=-0.000002 rms=0.003835 Jy/beam
! Combined flux in latest and established models = 3.51461 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 113 components and 3.51461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.198486Jy  sigma=2.277784
! Fit after  self-cal, rms=0.198033Jy  sigma=2.274091
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.198033Jy  sigma=2.274091
! Fit after  self-cal, rms=0.197328Jy  sigma=2.233664
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7526 mas, bmaj=1.784 mas, bpa=1.101 degrees
! Estimated noise=0.766792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137181 Jy
! Component: 100  -  total flux cleaned = 0.0250979 Jy
! Component: 150  -  total flux cleaned = 0.0350258 Jy
! Component: 200  -  total flux cleaned = 0.0438469 Jy
! Total flux subtracted in 200 components = 0.0438469 Jy
! Clean residual min=-0.016067 max=0.016227 Jy/beam
! Clean residual mean=0.000004 rms=0.003316 Jy/beam
! Combined flux in latest and established models = 3.55846 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 131 components and 3.55846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.194887Jy  sigma=2.213022
! Fit after  self-cal, rms=0.194654Jy  sigma=2.211703
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156229 Jy
! Component: 100  -  total flux cleaned = 0.0252126 Jy
! Component: 150  -  total flux cleaned = 0.0336448 Jy
! Component: 200  -  total flux cleaned = 0.0412502 Jy
! Total flux subtracted in 200 components = 0.0412502 Jy
! Clean residual min=-0.014819 max=0.012198 Jy/beam
! Clean residual mean=0.000005 rms=0.002930 Jy/beam
! Combined flux in latest and established models = 3.59971 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 150 components and 3.59971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.192137Jy  sigma=2.194043
! Fit after  self-cal, rms=0.191810Jy  sigma=2.191675
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.191810Jy  sigma=2.191675
! Fit after  self-cal, rms=0.191252Jy  sigma=2.186708
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.096 mas, bmaj=3.889 mas, bpa=7.283 degrees
! Estimated noise=1.15867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202685 Jy
! Component: 100  -  total flux cleaned = 0.0356454 Jy
! Component: 150  -  total flux cleaned = 0.0473776 Jy
! Component: 200  -  total flux cleaned = 0.0577886 Jy
! Total flux subtracted in 200 components = 0.0577886 Jy
! Clean residual min=-0.016867 max=0.018940 Jy/beam
! Clean residual mean=0.000013 rms=0.005179 Jy/beam
! Combined flux in latest and established models = 3.65749 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 177 components and 3.65749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.189431Jy  sigma=2.182054
! Fit after  self-cal, rms=0.189110Jy  sigma=2.178742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00969573 Jy
! Component: 100  -  total flux cleaned = 0.0189618 Jy
! Component: 150  -  total flux cleaned = 0.0266099 Jy
! Component: 200  -  total flux cleaned = 0.0335612 Jy
! Total flux subtracted in 200 components = 0.0335612 Jy
! Clean residual min=-0.016491 max=0.017235 Jy/beam
! Clean residual mean=0.000011 rms=0.004790 Jy/beam
! Combined flux in latest and established models = 3.69106 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 203 components and 3.69106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.188603Jy  sigma=2.183432
! Fit after  self-cal, rms=0.188457Jy  sigma=2.181979
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7525 mas, bmaj=1.783 mas, bpa=1.136 degrees
! Estimated noise=0.766536 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7525 x 1.783 at 1.136 degrees (North through East)
! Clean map  min=-0.010919  max=2.5983 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.188457Jy  sigma=2.181979
! Fit after  self-cal, rms=0.151033Jy  sigma=1.716978
! Inverting map and beam 
! Estimated beam: bmin=0.754 mas, bmaj=1.787 mas, bpa=1.177 degrees
! Estimated noise=0.763639 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00919204 Jy
! Component: 100  -  total flux cleaned = -0.00837018 Jy
! Component: 150  -  total flux cleaned = -0.00601166 Jy
! Component: 200  -  total flux cleaned = -0.00310661 Jy
! Total flux subtracted in 200 components = -0.00310661 Jy
! Clean residual min=-0.015036 max=0.016739 Jy/beam
! Clean residual mean=-0.000001 rms=0.003688 Jy/beam
! Combined flux in latest and established models = 3.68795 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 219 components and 3.68795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.148408Jy  sigma=1.686450
! Fit after  self-cal, rms=0.148304Jy  sigma=1.685177
! Inverting map 
! Added new window around map position (12.6, 16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159543 Jy
! Component: 100  -  total flux cleaned = 0.0210115 Jy
! Component: 150  -  total flux cleaned = 0.0256035 Jy
! Component: 200  -  total flux cleaned = 0.0299948 Jy
! Total flux subtracted in 200 components = 0.0299948 Jy
! Clean residual min=-0.014461 max=0.013687 Jy/beam
! Clean residual mean=-0.000007 rms=0.003407 Jy/beam
! Combined flux in latest and established models = 3.71794 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 238 components and 3.71794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.145404Jy  sigma=1.654161
! Fit after  self-cal, rms=0.145176Jy  sigma=1.650538
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.145176Jy  sigma=1.650538
! Fit after  self-cal, rms=0.144217Jy  sigma=1.635284
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5782 mas, bmaj=1.556 mas, bpa=0.4696 degrees
! Estimated noise=1.00358 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.8355 Jy
! Component: 100  -  total flux cleaned = 2.34712 Jy
! Component: 150  -  total flux cleaned = 2.65248 Jy
! Component: 200  -  total flux cleaned = 2.86136 Jy
! Total flux subtracted in 200 components = 2.86136 Jy
! Clean residual min=-0.061164 max=0.115100 Jy/beam
! Clean residual mean=0.000005 rms=0.012992 Jy/beam
! Combined flux in latest and established models = 2.86136 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 2.86136 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7543 mas, bmaj=1.788 mas, bpa=1.169 degrees
! Estimated noise=0.761276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.219712 Jy
! Component: 100  -  total flux cleaned = 0.33178 Jy
! Component: 150  -  total flux cleaned = 0.396995 Jy
! Component: 200  -  total flux cleaned = 0.442726 Jy
! Total flux subtracted in 200 components = 0.442726 Jy
! Clean residual min=-0.030231 max=0.028902 Jy/beam
! Clean residual mean=0.000004 rms=0.007354 Jy/beam
! Combined flux in latest and established models = 3.30409 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 52 components and 3.30409 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=3.902 mas, bpa=7.306 degrees
! Estimated noise=1.14516 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0666409 Jy
! Component: 100  -  total flux cleaned = 0.117808 Jy
! Component: 150  -  total flux cleaned = 0.159088 Jy
! Component: 200  -  total flux cleaned = 0.193095 Jy
! Total flux subtracted in 200 components = 0.193095 Jy
! Clean residual min=-0.031866 max=0.036672 Jy/beam
! Clean residual mean=-0.000012 rms=0.010025 Jy/beam
! Combined flux in latest and established models = 3.49718 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0287836 Jy
! Component: 100  -  total flux cleaned = 0.0535443 Jy
! Component: 150  -  total flux cleaned = 0.0751177 Jy
! Component: 200  -  total flux cleaned = 0.0940708 Jy
! Total flux subtracted in 200 components = 0.0940708 Jy
! Clean residual min=-0.023714 max=0.029760 Jy/beam
! Clean residual mean=-0.000023 rms=0.007966 Jy/beam
! Combined flux in latest and established models = 3.59125 Jy
! Adding 117 model components to the UV plane model.
! The established model now contains 160 components and 3.59125 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7543 mas, bmaj=1.788 mas, bpa=1.169 degrees
! Estimated noise=0.761276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179566 Jy
! Component: 100  -  total flux cleaned = 0.0277824 Jy
! Component: 150  -  total flux cleaned = 0.0375999 Jy
! Component: 200  -  total flux cleaned = 0.0452912 Jy
! Total flux subtracted in 200 components = 0.0452912 Jy
! Clean residual min=-0.018678 max=0.017315 Jy/beam
! Clean residual mean=-0.000009 rms=0.003963 Jy/beam
! Combined flux in latest and established models = 3.63654 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 183 components and 3.63654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.146259Jy  sigma=1.727738
! Fit after  self-cal, rms=0.145654Jy  sigma=1.706128
wmodel /J1733-1304_X_map.mod
! wmodel: Unable to open new model file: /J1733-1304_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1733-1304_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7543 x 1.788 at 1.169 degrees (North through East)
! Clean map  min=-0.015157  max=2.5768 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1733-1304_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.57681 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0038121 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.443817 0.443817 0.887634 1.77527 3.55053 7.10107 14.2021 28.4043 56.8085
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0114 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.576 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  675.954 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1733-1304_X_dfm.log closed on Thu May 19 23:31:12 2016