! Started logfile: /scr/pima/bg219i_uvs/J1729-2657_S_dfm.log on Thu May 19 23:30:57 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1729-2657_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1729-2657_S_uva.fits
! AN table 1: 58 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.75 visibilities/baseline/integration-bin.
! Found source: J1729-2657
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4872 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1729-2657_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028018Jy  sigma=19.328661
! Fit after  self-cal, rms=0.841710Jy  sigma=15.854236
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.047 mas, bmaj=23.48 mas, bpa=-1.118 degrees
! Estimated noise=0.81772 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.115405 Jy
! Component: 100  -  total flux cleaned = 0.159364 Jy
! Total flux subtracted in 100 components = 0.159364 Jy
! Clean residual min=-0.009413 max=0.020818 Jy/beam
! Clean residual mean=-0.000096 rms=0.004215 Jy/beam
! Combined flux in latest and established models = 0.159364 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.159364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081875Jy  sigma=1.532085
! Fit after  self-cal, rms=0.081710Jy  sigma=1.529528
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.312 mas, bmaj=26.53 mas, bpa=-0.8999 degrees
! Estimated noise=0.557505 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0324412 Jy
! Component: 100  -  total flux cleaned = 0.050328 Jy
! Component: 150  -  total flux cleaned = 0.061481 Jy
! Component: 200  -  total flux cleaned = 0.0685085 Jy
! Total flux subtracted in 200 components = 0.0685085 Jy
! Clean residual min=-0.003975 max=0.004833 Jy/beam
! Clean residual mean=-0.000042 rms=0.001310 Jy/beam
! Combined flux in latest and established models = 0.227872 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 85 components and 0.227872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067934Jy  sigma=1.253460
! Fit after  self-cal, rms=0.067815Jy  sigma=1.251339
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.312 x 26.53 at -0.8999 degrees (North through East)
! Clean map  min=-0.0040928  max=0.16276 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.00*    KP        1.00     
!   LA        0.96     NL        1.17     OV        1.01     PT        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00*    KP        0.99     
!   LA        0.96     NL        1.08     OV        0.99     PT        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00*    KP        0.99     
!   LA        0.98     NL        0.94     OV        1.00     PT        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00*    KP        0.99     
!   LA        0.99     NL        1.09     OV        0.97     PT        0.96     
! 
! 
! Fit before self-cal, rms=0.067815Jy  sigma=1.251339
! Fit after  self-cal, rms=0.067332Jy  sigma=1.239673
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.477 mas, bmaj=26.79 mas, bpa=-0.6672 degrees
! Estimated noise=0.552667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201747 Jy
! Component: 100  -  total flux cleaned = 0.00248744 Jy
! Component: 150  -  total flux cleaned = 0.00262184 Jy
! Component: 200  -  total flux cleaned = 0.00259255 Jy
! Total flux subtracted in 200 components = 0.00259255 Jy
! Clean residual min=-0.003306 max=0.002445 Jy/beam
! Clean residual mean=-0.000002 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.230465 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 103 components and 0.230465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067276Jy  sigma=1.238243
! Fit after  self-cal, rms=0.067304Jy  sigma=1.238112
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067304Jy  sigma=1.238112
! Fit after  self-cal, rms=0.067322Jy  sigma=1.235972
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.481 mas, bmaj=26.71 mas, bpa=-0.5963 degrees
! Estimated noise=0.553421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010048 Jy
! Component: 100  -  total flux cleaned = 0.00119636 Jy
! Component: 150  -  total flux cleaned = 0.00129493 Jy
! Component: 200  -  total flux cleaned = 0.00136371 Jy
! Total flux subtracted in 200 components = 0.00136371 Jy
! Clean residual min=-0.003236 max=0.002244 Jy/beam
! Clean residual mean=-0.000003 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.231829 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 121 components and 0.231829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067302Jy  sigma=1.235531
! Fit after  self-cal, rms=0.067307Jy  sigma=1.235516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114693 Jy
! Component: 100  -  total flux cleaned = 0.000134069 Jy
! Component: 150  -  total flux cleaned = 0.000173203 Jy
! Component: 200  -  total flux cleaned = 0.000192174 Jy
! Total flux subtracted in 200 components = 0.000192174 Jy
! Clean residual min=-0.003142 max=0.002220 Jy/beam
! Clean residual mean=-0.000003 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.232021 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 127 components and 0.232021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067296Jy  sigma=1.235316
! Fit after  self-cal, rms=0.067296Jy  sigma=1.235313
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067296Jy  sigma=1.235313
! Fit after  self-cal, rms=0.067248Jy  sigma=1.234406
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.471 mas, bmaj=26.63 mas, bpa=-0.5849 degrees
! Estimated noise=0.55303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000689217 Jy
! Component: 100  -  total flux cleaned = 0.000845106 Jy
! Component: 150  -  total flux cleaned = 0.000926466 Jy
! Component: 200  -  total flux cleaned = 0.000984728 Jy
! Total flux subtracted in 200 components = 0.000984728 Jy
! Clean residual min=-0.003086 max=0.002334 Jy/beam
! Clean residual mean=-0.000005 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.233006 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 137 components and 0.233006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067230Jy  sigma=1.234200
! Fit after  self-cal, rms=0.067236Jy  sigma=1.234191
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.6132e-05 Jy
! Component: 100  -  total flux cleaned = 5.42423e-05 Jy
! Component: 150  -  total flux cleaned = 7.24993e-05 Jy
! Component: 200  -  total flux cleaned = 8.89559e-05 Jy
! Total flux subtracted in 200 components = 8.89559e-05 Jy
! Clean residual min=-0.003041 max=0.002315 Jy/beam
! Clean residual mean=-0.000005 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.233095 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 141 components and 0.233095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067227Jy  sigma=1.234045
! Fit after  self-cal, rms=0.067227Jy  sigma=1.234042
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067227Jy  sigma=1.234042
! Fit after  self-cal, rms=0.067141Jy  sigma=1.233979
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.72 mas, bmaj=27.36 mas, bpa=0.6848 degrees
! Estimated noise=0.557665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000928509 Jy
! Component: 100  -  total flux cleaned = 0.00153271 Jy
! Component: 150  -  total flux cleaned = 0.00174058 Jy
! Component: 200  -  total flux cleaned = 0.00186992 Jy
! Total flux subtracted in 200 components = 0.00186992 Jy
! Clean residual min=-0.002941 max=0.002237 Jy/beam
! Clean residual mean=-0.000004 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.234964 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 147 components and 0.234965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067134Jy  sigma=1.233798
! Fit after  self-cal, rms=0.067135Jy  sigma=1.233793
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.34757e-05 Jy
! Component: 100  -  total flux cleaned = 0.000118032 Jy
! Component: 150  -  total flux cleaned = 0.000133 Jy
! Component: 200  -  total flux cleaned = 0.000147976 Jy
! Total flux subtracted in 200 components = 0.000147976 Jy
! Clean residual min=-0.002887 max=0.002211 Jy/beam
! Clean residual mean=-0.000003 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.235112 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 154 components and 0.235112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067130Jy  sigma=1.233705
! Fit after  self-cal, rms=0.067130Jy  sigma=1.233703
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.462 mas, bmaj=26.58 mas, bpa=-0.5659 degrees
! Estimated noise=0.552824 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.462 x 26.58 at -0.5659 degrees (North through East)
! Clean map  min=-0.0028347  max=0.16093 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.165 mas, bmaj=23.47 mas, bpa=-0.8956 degrees
! Estimated noise=0.815873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114348 Jy
! Component: 100  -  total flux cleaned = 0.157611 Jy
! Component: 150  -  total flux cleaned = 0.181453 Jy
! Component: 200  -  total flux cleaned = 0.196818 Jy
! Total flux subtracted in 200 components = 0.196818 Jy
! Clean residual min=-0.005487 max=0.008377 Jy/beam
! Clean residual mean=-0.000043 rms=0.002064 Jy/beam
! Combined flux in latest and established models = 0.196818 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and 0.196818 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.462 mas, bmaj=26.58 mas, bpa=-0.5659 degrees
! Estimated noise=0.552824 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138979 Jy
! Component: 100  -  total flux cleaned = 0.0221121 Jy
! Component: 150  -  total flux cleaned = 0.0272242 Jy
! Component: 200  -  total flux cleaned = 0.0305146 Jy
! Total flux subtracted in 200 components = 0.0305146 Jy
! Clean residual min=-0.003501 max=0.002838 Jy/beam
! Clean residual mean=-0.000018 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.227333 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 116 components and 0.227333 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.72 mas, bmaj=27.36 mas, bpa=0.6848 degrees
! Estimated noise=0.557665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267187 Jy
! Component: 100  -  total flux cleaned = 0.00451599 Jy
! Component: 150  -  total flux cleaned = 0.00582254 Jy
! Component: 200  -  total flux cleaned = 0.00675492 Jy
! Total flux subtracted in 200 components = 0.00675492 Jy
! Clean residual min=-0.003068 max=0.002287 Jy/beam
! Clean residual mean=-0.000005 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.234088 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000599198 Jy
! Component: 100  -  total flux cleaned = 0.000688594 Jy
! Component: 150  -  total flux cleaned = 0.00075179 Jy
! Component: 200  -  total flux cleaned = 0.000830518 Jy
! Total flux subtracted in 200 components = 0.000830518 Jy
! Clean residual min=-0.002970 max=0.002239 Jy/beam
! Clean residual mean=-0.000004 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.234918 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 159 components and 0.234918 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.462 mas, bmaj=26.58 mas, bpa=-0.5659 degrees
! Estimated noise=0.552824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013464 Jy
! Component: 100  -  total flux cleaned = -0.000188028 Jy
! Component: 150  -  total flux cleaned = -0.000282811 Jy
! Component: 200  -  total flux cleaned = -0.00036906 Jy
! Total flux subtracted in 200 components = -0.00036906 Jy
! Clean residual min=-0.002978 max=0.002280 Jy/beam
! Clean residual mean=-0.000004 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.234549 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 169 components and 0.234549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067135Jy  sigma=1.233833
! Fit after  self-cal, rms=0.067133Jy  sigma=1.233818
wmodel /J1729-2657_S_map.mod
! wmodel: Unable to open new model file: /J1729-2657_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1729-2657_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.462 x 26.58 at -0.5659 degrees (North through East)
! Clean map  min=-0.0029855  max=0.16069 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1729-2657_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.160695 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000692697 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.29319 1.29319 2.58638 5.17276 10.3455 20.691 41.3821 82.7642
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.16 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  231.984 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1729-2657_S_dfm.log closed on Thu May 19 23:30:59 2016