! Started logfile: /scr/pima/bg219i_uvs/J1727+4530_X_dfm.log on Thu May 19 23:30:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1727+4530_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1727+4530_X_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.784127 visibilities/baseline/integration-bin.
! Found source: J1727+4530
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 5928 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1727+4530_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.526095Jy  sigma=32.487526
! Fit after  self-cal, rms=0.191821Jy  sigma=4.169811
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8057 mas, bmaj=1.014 mas, bpa=-18.18 degrees
! Estimated noise=0.652017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.867615 Jy
! Component: 100  -  total flux cleaned = 1.07281 Jy
! Total flux subtracted in 100 components = 1.07281 Jy
! Clean residual min=-0.024810 max=0.076171 Jy/beam
! Clean residual mean=0.000011 rms=0.006230 Jy/beam
! Combined flux in latest and established models = 1.07281 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.07281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.137934Jy  sigma=2.988030
! Fit after  self-cal, rms=0.137764Jy  sigma=2.984439
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0762163 Jy
! Component: 100  -  total flux cleaned = 0.112034 Jy
! Total flux subtracted in 100 components = 0.112034 Jy
! Clean residual min=-0.012399 max=0.016902 Jy/beam
! Clean residual mean=0.000012 rms=0.002712 Jy/beam
! Combined flux in latest and established models = 1.18485 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 1.18485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080075Jy  sigma=1.635274
! Fit after  self-cal, rms=0.079890Jy  sigma=1.631552
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0187096 Jy
! Component: 100  -  total flux cleaned = 0.028319 Jy
! Total flux subtracted in 100 components = 0.028319 Jy
! Clean residual min=-0.010281 max=0.012842 Jy/beam
! Clean residual mean=0.000013 rms=0.002274 Jy/beam
! Combined flux in latest and established models = 1.21317 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 1.21317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075330Jy  sigma=1.489620
! Fit after  self-cal, rms=0.075274Jy  sigma=1.488494
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=1.286 mas, bpa=-15.7 degrees
! Estimated noise=0.455334 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.6, 24.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119569 Jy
! Component: 100  -  total flux cleaned = 0.0179058 Jy
! Component: 150  -  total flux cleaned = 0.0219588 Jy
! Component: 200  -  total flux cleaned = 0.0250107 Jy
! Total flux subtracted in 200 components = 0.0250107 Jy
! Clean residual min=-0.008997 max=0.012474 Jy/beam
! Clean residual mean=0.000018 rms=0.002176 Jy/beam
! Combined flux in latest and established models = 1.23818 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 43 components and 1.23818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073562Jy  sigma=1.438698
! Fit after  self-cal, rms=0.073184Jy  sigma=1.429406
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.052 x 1.286 at -15.7 degrees (North through East)
! Clean map  min=-0.0078832  max=1.1378 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.98     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.96     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.96     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.98     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.97     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.98     KP        1.00     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.99     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.98     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.00     NL        0.98     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.97     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.98     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.98     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.98     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.073184Jy  sigma=1.429406
! Fit after  self-cal, rms=0.069512Jy  sigma=1.327377
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=1.288 mas, bpa=-16.38 degrees
! Estimated noise=0.45391 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00208318 Jy
! Component: 100  -  total flux cleaned = -0.00175097 Jy
! Component: 150  -  total flux cleaned = -0.00129339 Jy
! Component: 200  -  total flux cleaned = -0.000991782 Jy
! Total flux subtracted in 200 components = -0.000991782 Jy
! Clean residual min=-0.006588 max=0.006555 Jy/beam
! Clean residual mean=0.000031 rms=0.001602 Jy/beam
! Combined flux in latest and established models = 1.23719 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 60 components and 1.23719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069090Jy  sigma=1.322341
! Fit after  self-cal, rms=0.069079Jy  sigma=1.321818
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069079Jy  sigma=1.321818
! Fit after  self-cal, rms=0.065198Jy  sigma=1.233290
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=1.286 mas, bpa=-16.23 degrees
! Estimated noise=0.453468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0035762 Jy
! Component: 100  -  total flux cleaned = -0.00487382 Jy
! Component: 150  -  total flux cleaned = -0.00582547 Jy
! Component: 200  -  total flux cleaned = -0.00628731 Jy
! Total flux subtracted in 200 components = -0.00628731 Jy
! Clean residual min=-0.003742 max=0.003724 Jy/beam
! Clean residual mean=0.000003 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 1.2309 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 79 components and 1.2309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064865Jy  sigma=1.228051
! Fit after  self-cal, rms=0.064827Jy  sigma=1.227111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.8, -29.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238625 Jy
! Component: 100  -  total flux cleaned = 0.00314345 Jy
! Component: 150  -  total flux cleaned = 0.00314803 Jy
! Component: 200  -  total flux cleaned = 0.00304069 Jy
! Total flux subtracted in 200 components = 0.00304069 Jy
! Clean residual min=-0.003248 max=0.002878 Jy/beam
! Clean residual mean=0.000007 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 1.23394 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 90 components and 1.23394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064603Jy  sigma=1.223207
! Fit after  self-cal, rms=0.064586Jy  sigma=1.222904
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064586Jy  sigma=1.222904
! Fit after  self-cal, rms=0.064594Jy  sigma=1.221354
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=1.286 mas, bpa=-16.12 degrees
! Estimated noise=0.453131 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00219819 Jy
! Component: 100  -  total flux cleaned = -0.00277204 Jy
! Component: 150  -  total flux cleaned = -0.00314502 Jy
! Component: 200  -  total flux cleaned = -0.00333531 Jy
! Total flux subtracted in 200 components = -0.00333531 Jy
! Clean residual min=-0.003033 max=0.002826 Jy/beam
! Clean residual mean=0.000008 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 1.2306 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 93 components and 1.2306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064431Jy  sigma=1.219388
! Fit after  self-cal, rms=0.064416Jy  sigma=1.219050
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000536281 Jy
! Component: 100  -  total flux cleaned = -0.000717374 Jy
! Component: 150  -  total flux cleaned = -0.000966306 Jy
! Component: 200  -  total flux cleaned = -0.00115703 Jy
! Total flux subtracted in 200 components = -0.00115703 Jy
! Clean residual min=-0.002962 max=0.002725 Jy/beam
! Clean residual mean=0.000008 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 1.22945 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 100 components and 1.22945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064347Jy  sigma=1.218019
! Fit after  self-cal, rms=0.064342Jy  sigma=1.217902
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064342Jy  sigma=1.217902
! Fit after  self-cal, rms=0.064361Jy  sigma=1.217094
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.309 mas, bmaj=2.401 mas, bpa=-32.51 degrees
! Estimated noise=0.581999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00214621 Jy
! Component: 100  -  total flux cleaned = -0.00248017 Jy
! Component: 150  -  total flux cleaned = -0.00260631 Jy
! Component: 200  -  total flux cleaned = -0.00275554 Jy
! Total flux subtracted in 200 components = -0.00275554 Jy
! Clean residual min=-0.003396 max=0.003147 Jy/beam
! Clean residual mean=0.000019 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 1.22669 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 105 components and 1.22669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064261Jy  sigma=1.216381
! Fit after  self-cal, rms=0.064252Jy  sigma=1.216078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000367568 Jy
! Component: 100  -  total flux cleaned = -0.000585149 Jy
! Component: 150  -  total flux cleaned = -0.000747466 Jy
! Component: 200  -  total flux cleaned = -0.000807894 Jy
! Total flux subtracted in 200 components = -0.000807894 Jy
! Clean residual min=-0.003426 max=0.003139 Jy/beam
! Clean residual mean=0.000020 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 1.22588 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 108 components and 1.22588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064228Jy  sigma=1.215862
! Fit after  self-cal, rms=0.064226Jy  sigma=1.215774
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=1.286 mas, bpa=-16.04 degrees
! Estimated noise=0.45275 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.055 x 1.286 at -16.04 degrees (North through East)
! Clean map  min=-0.002611  max=1.1337 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064226Jy  sigma=1.215774
! Fit after  self-cal, rms=0.055664Jy  sigma=1.028536
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=1.286 mas, bpa=-15.87 degrees
! Estimated noise=0.452967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012541 Jy
! Component: 100  -  total flux cleaned = -0.00155147 Jy
! Component: 150  -  total flux cleaned = -0.00171507 Jy
! Component: 200  -  total flux cleaned = -0.00180535 Jy
! Total flux subtracted in 200 components = -0.00180535 Jy
! Clean residual min=-0.002849 max=0.002878 Jy/beam
! Clean residual mean=0.000006 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 1.22408 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 125 components and 1.22408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055620Jy  sigma=1.027451
! Fit after  self-cal, rms=0.055618Jy  sigma=1.027358
! Inverting map 
! Added new window around map position (12, 3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166389 Jy
! Component: 100  -  total flux cleaned = 0.00166291 Jy
! Component: 150  -  total flux cleaned = 0.00176064 Jy
! Component: 200  -  total flux cleaned = 0.00163692 Jy
! Total flux subtracted in 200 components = 0.00163692 Jy
! Clean residual min=-0.002672 max=0.002488 Jy/beam
! Clean residual mean=0.000006 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 1.22572 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 139 components and 1.22572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055493Jy  sigma=1.024105
! Fit after  self-cal, rms=0.055489Jy  sigma=1.023994
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055489Jy  sigma=1.023994
! Fit after  self-cal, rms=0.055468Jy  sigma=1.023707
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8082 mas, bmaj=1.014 mas, bpa=-18.18 degrees
! Estimated noise=0.65051 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.86549 Jy
! Component: 100  -  total flux cleaned = 1.06975 Jy
! Component: 150  -  total flux cleaned = 1.14381 Jy
! Component: 200  -  total flux cleaned = 1.17746 Jy
! Total flux subtracted in 200 components = 1.17746 Jy
! Clean residual min=-0.006935 max=0.015499 Jy/beam
! Clean residual mean=0.000002 rms=0.001674 Jy/beam
! Combined flux in latest and established models = 1.17746 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 1.17746 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.286 mas, bpa=-15.81 degrees
! Estimated noise=0.452849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210581 Jy
! Component: 100  -  total flux cleaned = 0.0298412 Jy
! Component: 150  -  total flux cleaned = 0.0344712 Jy
! Component: 200  -  total flux cleaned = 0.0377097 Jy
! Total flux subtracted in 200 components = 0.0377097 Jy
! Clean residual min=-0.002880 max=0.004003 Jy/beam
! Clean residual mean=0.000003 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 1.21517 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 25 components and 1.21517 Jy
! Inverting map 
! Added new window around map position (-1.2, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00344569 Jy
! Component: 100  -  total flux cleaned = 0.00528346 Jy
! Component: 150  -  total flux cleaned = 0.00655105 Jy
! Component: 200  -  total flux cleaned = 0.00741172 Jy
! Total flux subtracted in 200 components = 0.00741172 Jy
! Clean residual min=-0.002683 max=0.002753 Jy/beam
! Clean residual mean=0.000005 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 1.22258 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 47 components and 1.22258 Jy
! Inverting map 
! Added new window around map position (1, 10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166143 Jy
! Component: 100  -  total flux cleaned = 0.00210553 Jy
! Component: 150  -  total flux cleaned = 0.00239648 Jy
! Component: 200  -  total flux cleaned = 0.00261143 Jy
! Total flux subtracted in 200 components = 0.00261143 Jy
! Clean residual min=-0.002611 max=0.002361 Jy/beam
! Clean residual mean=0.000005 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 1.2252 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 63 components and 1.2252 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.311 mas, bmaj=2.401 mas, bpa=-32.68 degrees
! Estimated noise=0.581602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000443798 Jy
! Component: 100  -  total flux cleaned = 0.000656262 Jy
! Component: 150  -  total flux cleaned = 0.000732151 Jy
! Component: 200  -  total flux cleaned = 0.000798893 Jy
! Total flux subtracted in 200 components = 0.000798893 Jy
! Clean residual min=-0.002951 max=0.002869 Jy/beam
! Clean residual mean=0.000011 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 1.22599 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.47005e-05 Jy
! Component: 100  -  total flux cleaned = 0.000188283 Jy
! Component: 150  -  total flux cleaned = 0.00030586 Jy
! Component: 200  -  total flux cleaned = 0.000361737 Jy
! Total flux subtracted in 200 components = 0.000361737 Jy
! Clean residual min=-0.002900 max=0.002891 Jy/beam
! Clean residual mean=0.000011 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 1.22636 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 88 components and 1.22636 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.286 mas, bpa=-15.81 degrees
! Estimated noise=0.452849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00013448 Jy
! Component: 100  -  total flux cleaned = 0.000181115 Jy
! Component: 150  -  total flux cleaned = 9.87726e-05 Jy
! Component: 200  -  total flux cleaned = 9.76018e-05 Jy
! Total flux subtracted in 200 components = 9.76018e-05 Jy
! Clean residual min=-0.002466 max=0.002376 Jy/beam
! Clean residual mean=0.000005 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 1.22645 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 108 components and 1.22645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055346Jy  sigma=1.020517
! Fit after  self-cal, rms=0.055301Jy  sigma=1.019677
wmodel /J1727+4530_X_map.mod
! wmodel: Unable to open new model file: /J1727+4530_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1727+4530_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.056 x 1.286 at -15.81 degrees (North through East)
! Clean map  min=-0.0023382  max=1.1355 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1727+4530_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.13554 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000564889 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.149239 0.149239 0.298478 0.596955 1.19391 2.38782 4.77564 9.55128 19.1026 38.2051 76.4103
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.135 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2010.2 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1727+4530_X_dfm.log closed on Thu May 19 23:30:40 2016