! Started logfile: /scr/pima/bg219i_uvs/J1726-2258_X_uvs.log on Wed Apr  6 23:51:23 2016
obs /scr/pima/bg219i_uvs/J1726-2258_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1726-2258_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.821296 visibilities/baseline/integration-bin.
! Found source: J1726-2258
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21288 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1726-2258_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.076408Jy  sigma=23.452828
! Fit after  self-cal, rms=0.677975Jy  sigma=14.673260
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6174 mas, bmaj=1.685 mas, bpa=-3.636 degrees
! Estimated noise=0.557691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.220423 Jy
! Component: 100  -  total flux cleaned = 0.306315 Jy
! Total flux subtracted in 100 components = 0.306315 Jy
! Clean residual min=-0.021044 max=0.061684 Jy/beam
! Clean residual mean=-0.000101 rms=0.006394 Jy/beam
! Combined flux in latest and established models = 0.306315 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.306315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.147908Jy  sigma=3.127510
! Fit after  self-cal, rms=0.147744Jy  sigma=3.123426
! Inverting map 
! Added new window around map position (1, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0619316 Jy
! Component: 100  -  total flux cleaned = 0.102006 Jy
! Total flux subtracted in 100 components = 0.102006 Jy
! Clean residual min=-0.014231 max=0.034966 Jy/beam
! Clean residual mean=-0.000054 rms=0.003568 Jy/beam
! Combined flux in latest and established models = 0.408322 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.408322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.097621Jy  sigma=2.023289
! Fit after  self-cal, rms=0.096097Jy  sigma=1.985854
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.029853 Jy
! Component: 100  -  total flux cleaned = 0.0500276 Jy
! Total flux subtracted in 100 components = 0.0500276 Jy
! Clean residual min=-0.010155 max=0.020867 Jy/beam
! Clean residual mean=-0.000029 rms=0.002260 Jy/beam
! Combined flux in latest and established models = 0.458349 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.458349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078674Jy  sigma=1.585143
! Fit after  self-cal, rms=0.078211Jy  sigma=1.573988
! Inverting map 
! Added new window around map position (-0.8, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018128 Jy
! Component: 100  -  total flux cleaned = 0.0302116 Jy
! Total flux subtracted in 100 components = 0.0302116 Jy
! Clean residual min=-0.007025 max=0.007788 Jy/beam
! Clean residual mean=-0.000015 rms=0.001563 Jy/beam
! Combined flux in latest and established models = 0.488561 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 42 components and 0.488561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071473Jy  sigma=1.412700
! Fit after  self-cal, rms=0.071419Jy  sigma=1.411924
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8168 mas, bmaj=2.006 mas, bpa=-5.32 degrees
! Estimated noise=0.299963 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132825 Jy
! Component: 100  -  total flux cleaned = 0.0211948 Jy
! Component: 150  -  total flux cleaned = 0.0261321 Jy
! Component: 200  -  total flux cleaned = 0.0291595 Jy
! Total flux subtracted in 200 components = 0.0291595 Jy
! Clean residual min=-0.005069 max=0.005669 Jy/beam
! Clean residual mean=-0.000000 rms=0.001291 Jy/beam
! Combined flux in latest and established models = 0.51772 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 56 components and 0.51772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068942Jy  sigma=1.346061
! Fit after  self-cal, rms=0.068888Jy  sigma=1.344833
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8168 x 2.006 at -5.32 degrees (North through East)
! Clean map  min=-0.0045609  max=0.30634 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.12     KP        0.99     
!   LA        0.99     MK        1.04     NL        0.99     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.15     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.13     KP        1.00     
!   LA        1.00     MK        1.03     NL        0.98     OV        0.96     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.10     KP        0.98     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.18     KP        1.01     
!   LA        0.99     MK        1.02     NL        0.98     OV        0.97     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.14     KP        1.00     
!   LA        1.01     MK        0.99     NL        0.99     OV        0.98     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.13     KP        1.00     
!   LA        1.01     MK        1.00     NL        0.98     OV        0.97     
!   PT        0.98     SC        0.96     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068888Jy  sigma=1.344833
! Fit after  self-cal, rms=0.069653Jy  sigma=1.318799
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8189 mas, bmaj=1.997 mas, bpa=-4.908 degrees
! Estimated noise=0.29917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00157263 Jy
! Component: 100  -  total flux cleaned = -0.00202018 Jy
! Component: 150  -  total flux cleaned = -0.00208316 Jy
! Component: 200  -  total flux cleaned = -0.00213791 Jy
! Total flux subtracted in 200 components = -0.00213791 Jy
! Clean residual min=-0.003809 max=0.003721 Jy/beam
! Clean residual mean=-0.000006 rms=0.000998 Jy/beam
! Combined flux in latest and established models = 0.515582 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 61 components and 0.515582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069435Jy  sigma=1.315250
! Fit after  self-cal, rms=0.069462Jy  sigma=1.314780
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069462Jy  sigma=1.314780
! Fit after  self-cal, rms=0.068849Jy  sigma=1.297882
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8191 mas, bmaj=1.996 mas, bpa=-4.742 degrees
! Estimated noise=0.299005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000434238 Jy
! Component: 100  -  total flux cleaned = -0.000592027 Jy
! Component: 150  -  total flux cleaned = -0.0006326 Jy
! Component: 200  -  total flux cleaned = -0.000671252 Jy
! Total flux subtracted in 200 components = -0.000671252 Jy
! Clean residual min=-0.002769 max=0.002465 Jy/beam
! Clean residual mean=-0.000003 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.514911 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 66 components and 0.514911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068758Jy  sigma=1.296486
! Fit after  self-cal, rms=0.068755Jy  sigma=1.296293
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.51061e-05 Jy
! Component: 100  -  total flux cleaned = -0.000193389 Jy
! Component: 150  -  total flux cleaned = -0.000297687 Jy
! Component: 200  -  total flux cleaned = -0.00032953 Jy
! Total flux subtracted in 200 components = -0.00032953 Jy
! Clean residual min=-0.002633 max=0.002449 Jy/beam
! Clean residual mean=-0.000003 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.514582 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 67 components and 0.514582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068705Jy  sigma=1.295531
! Fit after  self-cal, rms=0.068699Jy  sigma=1.295419
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068699Jy  sigma=1.295419
! Fit after  self-cal, rms=0.068928Jy  sigma=1.287914
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8195 mas, bmaj=1.996 mas, bpa=-4.665 degrees
! Estimated noise=0.299267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001771 Jy
! Component: 100  -  total flux cleaned = 4.87715e-05 Jy
! Component: 150  -  total flux cleaned = -8.72224e-06 Jy
! Component: 200  -  total flux cleaned = -6.27993e-05 Jy
! Total flux subtracted in 200 components = -6.27993e-05 Jy
! Clean residual min=-0.002622 max=0.002201 Jy/beam
! Clean residual mean=-0.000001 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.514519 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 69 components and 0.514519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068893Jy  sigma=1.287376
! Fit after  self-cal, rms=0.068900Jy  sigma=1.287301
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.11547e-05 Jy
! Component: 100  -  total flux cleaned = -7.58892e-05 Jy
! Component: 150  -  total flux cleaned = -9.98696e-05 Jy
! Component: 200  -  total flux cleaned = -0.000122596 Jy
! Total flux subtracted in 200 components = -0.000122596 Jy
! Clean residual min=-0.002541 max=0.002183 Jy/beam
! Clean residual mean=-0.000001 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.514396 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 70 components and 0.514396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068880Jy  sigma=1.286909
! Fit after  self-cal, rms=0.068876Jy  sigma=1.286862
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068876Jy  sigma=1.286862
! Fit after  self-cal, rms=0.068948Jy  sigma=1.286806
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.249 mas, bmaj=5.023 mas, bpa=-0.8199 degrees
! Estimated noise=0.397362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000685153 Jy
! Component: 100  -  total flux cleaned = -0.000734309 Jy
! Component: 150  -  total flux cleaned = -0.000792343 Jy
! Component: 200  -  total flux cleaned = -0.000843802 Jy
! Total flux subtracted in 200 components = -0.000843802 Jy
! Clean residual min=-0.001793 max=0.001901 Jy/beam
! Clean residual mean=-0.000003 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.513552 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 78 components and 0.513552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068941Jy  sigma=1.286607
! Fit after  self-cal, rms=0.068939Jy  sigma=1.286558
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.27942e-05 Jy
! Component: 100  -  total flux cleaned = -7.00256e-05 Jy
! Component: 150  -  total flux cleaned = -0.000106225 Jy
! Component: 200  -  total flux cleaned = -0.000128057 Jy
! Total flux subtracted in 200 components = -0.000128057 Jy
! Clean residual min=-0.001780 max=0.001885 Jy/beam
! Clean residual mean=-0.000003 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.513424 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 79 components and 0.513424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068931Jy  sigma=1.286449
! Fit after  self-cal, rms=0.068928Jy  sigma=1.286399
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8204 mas, bmaj=1.997 mas, bpa=-4.65 degrees
! Estimated noise=0.299619 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8204 x 1.997 at -4.65 degrees (North through East)
! Clean map  min=-0.0049608  max=0.30533 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6177 mas, bmaj=1.675 mas, bpa=-3.009 degrees
! Estimated noise=0.559679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.221319 Jy
! Component: 100  -  total flux cleaned = 0.313966 Jy
! Component: 150  -  total flux cleaned = 0.373715 Jy
! Component: 200  -  total flux cleaned = 0.414393 Jy
! Total flux subtracted in 200 components = 0.414393 Jy
! Clean residual min=-0.010099 max=0.022515 Jy/beam
! Clean residual mean=-0.000048 rms=0.003013 Jy/beam
! Combined flux in latest and established models = 0.414393 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.414393 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8204 mas, bmaj=1.997 mas, bpa=-4.65 degrees
! Estimated noise=0.299619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.042339 Jy
! Component: 100  -  total flux cleaned = 0.0654749 Jy
! Component: 150  -  total flux cleaned = 0.0789523 Jy
! Component: 200  -  total flux cleaned = 0.0872229 Jy
! Total flux subtracted in 200 components = 0.0872229 Jy
! Clean residual min=-0.003296 max=0.004815 Jy/beam
! Clean residual mean=-0.000012 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.501616 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 48 components and 0.501616 Jy
! Inverting map 
! Added new window around map position (1.4, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00540604 Jy
! Component: 100  -  total flux cleaned = 0.00887856 Jy
! Component: 150  -  total flux cleaned = 0.0100881 Jy
! Component: 200  -  total flux cleaned = 0.010748 Jy
! Total flux subtracted in 200 components = 0.010748 Jy
! Clean residual min=-0.002998 max=0.002366 Jy/beam
! Clean residual mean=-0.000004 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.512364 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 69 components and 0.512364 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.249 mas, bmaj=5.023 mas, bpa=-0.8199 degrees
! Estimated noise=0.397362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106356 Jy
! Component: 100  -  total flux cleaned = 0.00121588 Jy
! Component: 150  -  total flux cleaned = 0.00125896 Jy
! Component: 200  -  total flux cleaned = 0.00125904 Jy
! Total flux subtracted in 200 components = 0.00125904 Jy
! Clean residual min=-0.001709 max=0.002012 Jy/beam
! Clean residual mean=-0.000004 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.513623 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.78098e-05 Jy
! Component: 100  -  total flux cleaned = -5.07552e-05 Jy
! Component: 150  -  total flux cleaned = -0.000119741 Jy
! Component: 200  -  total flux cleaned = -0.000182928 Jy
! Total flux subtracted in 200 components = -0.000182928 Jy
! Clean residual min=-0.001719 max=0.001938 Jy/beam
! Clean residual mean=-0.000004 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.51344 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.51344 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8204 mas, bmaj=1.997 mas, bpa=-4.65 degrees
! Estimated noise=0.299619 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000522848 Jy
! Component: 100  -  total flux cleaned = -0.000647855 Jy
! Component: 150  -  total flux cleaned = -0.000597981 Jy
! Component: 200  -  total flux cleaned = -0.00050857 Jy
! Total flux subtracted in 200 components = -0.00050857 Jy
! Clean residual min=-0.002623 max=0.001958 Jy/beam
! Clean residual mean=-0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.512932 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 0.512932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068893Jy  sigma=1.285286
! Fit after  self-cal, rms=0.068884Jy  sigma=1.284914
wmodel /scr/pima/bg219i_uvs/J1726-2258_X_map.mod
! Writing 91 model components to file: /scr/pima/bg219i_uvs/J1726-2258_X_map.mod
wobs /scr/pima/bg219i_uvs/J1726-2258_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J1726-2258_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J1726-2258_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219i_uvs/J1726-2258_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000727095 Jy
! Component: 100  -  total flux cleaned = -0.000555638 Jy
! Component: 150  -  total flux cleaned = -0.000684 Jy
! Component: 200  -  total flux cleaned = -0.000653473 Jy
! Component: 250  -  total flux cleaned = -0.000743227 Jy
! Component: 300  -  total flux cleaned = -0.000713994 Jy
! Component: 350  -  total flux cleaned = -0.000742222 Jy
! Component: 400  -  total flux cleaned = -0.000797453 Jy
! Component: 450  -  total flux cleaned = -0.000955804 Jy
! Component: 500  -  total flux cleaned = -0.0010069 Jy
! Component: 550  -  total flux cleaned = -0.00118283 Jy
! Component: 600  -  total flux cleaned = -0.00133016 Jy
! Component: 650  -  total flux cleaned = -0.00149817 Jy
! Component: 700  -  total flux cleaned = -0.0016614 Jy
! Component: 750  -  total flux cleaned = -0.00179817 Jy
! Component: 800  -  total flux cleaned = -0.00188742 Jy
! Component: 850  -  total flux cleaned = -0.00204049 Jy
! Component: 900  -  total flux cleaned = -0.00208332 Jy
! Component: 950  -  total flux cleaned = -0.00216777 Jy
! Component: 1000  -  total flux cleaned = -0.00225053 Jy
! Component: 1050  -  total flux cleaned = -0.00231159 Jy
! Component: 1100  -  total flux cleaned = -0.00235169 Jy
! Component: 1150  -  total flux cleaned = -0.00233228 Jy
! Component: 1200  -  total flux cleaned = -0.00242967 Jy
! Component: 1250  -  total flux cleaned = -0.00242939 Jy
! Component: 1300  -  total flux cleaned = -0.00242917 Jy
! Component: 1350  -  total flux cleaned = -0.00242935 Jy
! Component: 1400  -  total flux cleaned = -0.0024661 Jy
! Component: 1450  -  total flux cleaned = -0.0024301 Jy
! Component: 1500  -  total flux cleaned = -0.00244826 Jy
! Component: 1550  -  total flux cleaned = -0.00243074 Jy
! Component: 1600  -  total flux cleaned = -0.0024134 Jy
! Component: 1650  -  total flux cleaned = -0.00239661 Jy
! Component: 1700  -  total flux cleaned = -0.00241355 Jy
! Component: 1750  -  total flux cleaned = -0.00241335 Jy
! Component: 1800  -  total flux cleaned = -0.00239646 Jy
! Component: 1850  -  total flux cleaned = -0.00242924 Jy
! Component: 1900  -  total flux cleaned = -0.00242906 Jy
! Component: 1950  -  total flux cleaned = -0.00246079 Jy
! Component: 2000  -  total flux cleaned = -0.00242872 Jy
! Component: 2050  -  total flux cleaned = -0.00239753 Jy
! Component: 2100  -  total flux cleaned = -0.00236686 Jy
! Component: 2150  -  total flux cleaned = -0.0023825 Jy
! Component: 2200  -  total flux cleaned = -0.00244292 Jy
! Component: 2250  -  total flux cleaned = -0.00236772 Jy
! Component: 2300  -  total flux cleaned = -0.00239748 Jy
! Component: 2350  -  total flux cleaned = -0.00239739 Jy
! Component: 2400  -  total flux cleaned = -0.00238303 Jy
! Component: 2450  -  total flux cleaned = -0.00239758 Jy
! Component: 2500  -  total flux cleaned = -0.00235469 Jy
! Component: 2550  -  total flux cleaned = -0.00238298 Jy
! Component: 2600  -  total flux cleaned = -0.00235488 Jy
! Component: 2650  -  total flux cleaned = -0.00235495 Jy
! Component: 2700  -  total flux cleaned = -0.00227236 Jy
! Component: 2750  -  total flux cleaned = -0.0022587 Jy
! Component: 2800  -  total flux cleaned = -0.00228586 Jy
! Component: 2850  -  total flux cleaned = -0.00227237 Jy
! Component: 2900  -  total flux cleaned = -0.00227225 Jy
! Component: 2950  -  total flux cleaned = -0.0021931 Jy
! Component: 3000  -  total flux cleaned = -0.00221925 Jy
! Component: 3050  -  total flux cleaned = -0.00220632 Jy
! Component: 3100  -  total flux cleaned = -0.00223218 Jy
! Component: 3150  -  total flux cleaned = -0.00221945 Jy
! Component: 3200  -  total flux cleaned = -0.00223228 Jy
! Component: 3250  -  total flux cleaned = -0.00223223 Jy
! Component: 3300  -  total flux cleaned = -0.00224487 Jy
! Component: 3350  -  total flux cleaned = -0.00220778 Jy
! Component: 3400  -  total flux cleaned = -0.00224465 Jy
! Component: 3450  -  total flux cleaned = -0.00226903 Jy
! Component: 3500  -  total flux cleaned = -0.00218423 Jy
! Component: 3550  -  total flux cleaned = -0.00219629 Jy
! Component: 3600  -  total flux cleaned = -0.00222008 Jy
! Component: 3650  -  total flux cleaned = -0.00220822 Jy
! Component: 3700  -  total flux cleaned = -0.00222006 Jy
! Component: 3750  -  total flux cleaned = -0.00220825 Jy
! Component: 3800  -  total flux cleaned = -0.00221981 Jy
! Component: 3850  -  total flux cleaned = -0.00221986 Jy
! Component: 3900  -  total flux cleaned = -0.00220827 Jy
! Component: 3950  -  total flux cleaned = -0.00225387 Jy
! Component: 4000  -  total flux cleaned = -0.00220849 Jy
! Component: 4050  -  total flux cleaned = -0.00220853 Jy
! Total flux subtracted in 4096 components = -0.0022084 Jy
! Clean residual min=-0.000685 max=0.000618 Jy/beam
! Clean residual mean=-0.000000 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.510723 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 370 components and 0.510723 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J1726-2258_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8204 x 1.997 at -4.65 degrees (North through East)
! Clean map  min=-0.0024769  max=0.30445 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1726-2258_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.304453 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00018728 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.18454 0.18454 0.369081 0.738162 1.47632 2.95265 5.90529 11.8106 23.6212 47.2423 94.4847
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.304 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1625.66 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1726-2258_X_uvs.log closed on Wed Apr  6 23:51:28 2016