! Started logfile: /scr/pima/bg219i_uvs/J1726-2258_X_dfm.log on Thu May 19 23:30:28 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1726-2258_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1726-2258_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.821296 visibilities/baseline/integration-bin.
! Found source: J1726-2258
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21288 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1726-2258_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.069927Jy  sigma=22.413306
! Fit after  self-cal, rms=0.680730Jy  sigma=14.185758
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5919 mas, bmaj=1.657 mas, bpa=-4.095 degrees
! Estimated noise=0.475859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.211408 Jy
! Component: 100  -  total flux cleaned = 0.293409 Jy
! Total flux subtracted in 100 components = 0.293409 Jy
! Clean residual min=-0.019015 max=0.057576 Jy/beam
! Clean residual mean=-0.000094 rms=0.005575 Jy/beam
! Combined flux in latest and established models = 0.293409 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.293409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.154486Jy  sigma=3.164889
! Fit after  self-cal, rms=0.154351Jy  sigma=3.161531
! Inverting map 
! Added new window around map position (1, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0591356 Jy
! Component: 100  -  total flux cleaned = 0.0989051 Jy
! Total flux subtracted in 100 components = 0.0989051 Jy
! Clean residual min=-0.011156 max=0.034307 Jy/beam
! Clean residual mean=-0.000052 rms=0.003235 Jy/beam
! Combined flux in latest and established models = 0.392314 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 22 components and 0.392314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105187Jy  sigma=2.108896
! Fit after  self-cal, rms=0.103827Jy  sigma=2.076834
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0305164 Jy
! Component: 100  -  total flux cleaned = 0.051633 Jy
! Total flux subtracted in 100 components = 0.051633 Jy
! Clean residual min=-0.008027 max=0.021055 Jy/beam
! Clean residual mean=-0.000030 rms=0.002051 Jy/beam
! Combined flux in latest and established models = 0.443947 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.443947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084816Jy  sigma=1.651371
! Fit after  self-cal, rms=0.084316Jy  sigma=1.639897
! Inverting map 
! Added new window around map position (-0.8, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189446 Jy
! Component: 100  -  total flux cleaned = 0.0321499 Jy
! Total flux subtracted in 100 components = 0.0321499 Jy
! Clean residual min=-0.005533 max=0.007545 Jy/beam
! Clean residual mean=-0.000016 rms=0.001376 Jy/beam
! Combined flux in latest and established models = 0.476097 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.476097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076385Jy  sigma=1.454822
! Fit after  self-cal, rms=0.076325Jy  sigma=1.453905
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8121 mas, bmaj=1.994 mas, bpa=-5.327 degrees
! Estimated noise=0.237629 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01679 Jy
! Component: 100  -  total flux cleaned = 0.0265014 Jy
! Component: 150  -  total flux cleaned = 0.0325342 Jy
! Component: 200  -  total flux cleaned = 0.0363942 Jy
! Total flux subtracted in 200 components = 0.0363942 Jy
! Clean residual min=-0.004770 max=0.005381 Jy/beam
! Clean residual mean=-0.000005 rms=0.001202 Jy/beam
! Combined flux in latest and established models = 0.512491 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 58 components and 0.512491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072736Jy  sigma=1.358559
! Fit after  self-cal, rms=0.072673Jy  sigma=1.357136
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8121 x 1.994 at -5.327 degrees (North through East)
! Clean map  min=-0.0044321  max=0.30281 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.11     KP        0.98     
!   LA        0.98     MK        1.04     NL        0.99     OV        0.98     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.14     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.12     KP        0.99     
!   LA        0.99     MK        1.03     NL        0.98     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.09     KP        0.98     
!   LA        0.99     MK        1.00     NL        0.98     OV        0.98     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.14     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.17     KP        1.01     
!   LA        0.99     MK        1.02     NL        0.98     OV        0.97     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.13     KP        1.00     
!   LA        1.00     MK        0.99     NL        0.99     OV        0.98     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.12     KP        0.99     
!   LA        1.01     MK        1.00     NL        0.98     OV        0.96     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.09     KP        0.98     
!   LA        1.00     MK        0.99     NL        0.99     OV        0.97     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.14     KP        1.00     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.18     KP        0.99     
!   LA        0.99     MK        1.01     NL        0.99     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.20     KP        1.01     
!   LA        1.00     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.072673Jy  sigma=1.357136
! Fit after  self-cal, rms=0.073602Jy  sigma=1.330545
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8138 mas, bmaj=1.985 mas, bpa=-4.956 degrees
! Estimated noise=0.236305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00194137 Jy
! Component: 100  -  total flux cleaned = -0.00239985 Jy
! Component: 150  -  total flux cleaned = -0.00246472 Jy
! Component: 200  -  total flux cleaned = -0.00246381 Jy
! Total flux subtracted in 200 components = -0.00246381 Jy
! Clean residual min=-0.003257 max=0.003431 Jy/beam
! Clean residual mean=-0.000006 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.510027 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 63 components and 0.510027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073384Jy  sigma=1.326820
! Fit after  self-cal, rms=0.073417Jy  sigma=1.326330
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073417Jy  sigma=1.326330
! Fit after  self-cal, rms=0.072914Jy  sigma=1.311541
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8138 mas, bmaj=1.983 mas, bpa=-4.793 degrees
! Estimated noise=0.236035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000689916 Jy
! Component: 100  -  total flux cleaned = -0.000794412 Jy
! Component: 150  -  total flux cleaned = -0.000839192 Jy
! Component: 200  -  total flux cleaned = -0.000879803 Jy
! Total flux subtracted in 200 components = -0.000879803 Jy
! Clean residual min=-0.002341 max=0.002474 Jy/beam
! Clean residual mean=-0.000003 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.509147 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.509147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072834Jy  sigma=1.310147
! Fit after  self-cal, rms=0.072832Jy  sigma=1.309995
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.51717e-05 Jy
! Component: 100  -  total flux cleaned = -0.000135836 Jy
! Component: 150  -  total flux cleaned = -0.000168643 Jy
! Component: 200  -  total flux cleaned = -0.000168695 Jy
! Total flux subtracted in 200 components = -0.000168695 Jy
! Clean residual min=-0.002159 max=0.002345 Jy/beam
! Clean residual mean=-0.000003 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.508978 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 71 components and 0.508978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072790Jy  sigma=1.309331
! Fit after  self-cal, rms=0.072785Jy  sigma=1.309248
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072785Jy  sigma=1.309248
! Fit after  self-cal, rms=0.073074Jy  sigma=1.302763
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.814 mas, bmaj=1.982 mas, bpa=-4.714 degrees
! Estimated noise=0.236068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.22263e-06 Jy
! Component: 100  -  total flux cleaned = -0.00014459 Jy
! Component: 150  -  total flux cleaned = -0.000143665 Jy
! Component: 200  -  total flux cleaned = -0.000122278 Jy
! Total flux subtracted in 200 components = -0.000122278 Jy
! Clean residual min=-0.002177 max=0.001862 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.508856 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 72 components and 0.508856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073050Jy  sigma=1.302335
! Fit after  self-cal, rms=0.073058Jy  sigma=1.302270
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.61508e-05 Jy
! Component: 100  -  total flux cleaned = -9.14918e-06 Jy
! Component: 150  -  total flux cleaned = -1.0393e-05 Jy
! Component: 200  -  total flux cleaned = -1.12444e-05 Jy
! Total flux subtracted in 200 components = -1.12444e-05 Jy
! Clean residual min=-0.002108 max=0.001839 Jy/beam
! Clean residual mean=-0.000001 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.508845 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 75 components and 0.508845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073044Jy  sigma=1.302019
! Fit after  self-cal, rms=0.073042Jy  sigma=1.301977
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073042Jy  sigma=1.301977
! Fit after  self-cal, rms=0.073104Jy  sigma=1.301947
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.25 mas, bmaj=5.038 mas, bpa=-0.8499 degrees
! Estimated noise=0.312617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000283889 Jy
! Component: 100  -  total flux cleaned = -0.00037759 Jy
! Component: 150  -  total flux cleaned = -0.000433321 Jy
! Component: 200  -  total flux cleaned = -0.000467937 Jy
! Total flux subtracted in 200 components = -0.000467937 Jy
! Clean residual min=-0.001471 max=0.001580 Jy/beam
! Clean residual mean=-0.000002 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.508377 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 82 components and 0.508377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073104Jy  sigma=1.301962
! Fit after  self-cal, rms=0.073101Jy  sigma=1.301921
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.13167e-05 Jy
! Component: 100  -  total flux cleaned = -4.36814e-05 Jy
! Component: 150  -  total flux cleaned = -6.45633e-05 Jy
! Component: 200  -  total flux cleaned = -8.27787e-05 Jy
! Total flux subtracted in 200 components = -8.27787e-05 Jy
! Clean residual min=-0.001442 max=0.001580 Jy/beam
! Clean residual mean=-0.000003 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.508294 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 83 components and 0.508294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073104Jy  sigma=1.302011
! Fit after  self-cal, rms=0.073102Jy  sigma=1.301986
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8146 mas, bmaj=1.982 mas, bpa=-4.699 degrees
! Estimated noise=0.2362 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8146 x 1.982 at -4.699 degrees (North through East)
! Clean map  min=-0.0055813  max=0.30093 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5915 mas, bmaj=1.645 mas, bpa=-3.539 degrees
! Estimated noise=0.47521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.211233 Jy
! Component: 100  -  total flux cleaned = 0.29912 Jy
! Component: 150  -  total flux cleaned = 0.357116 Jy
! Component: 200  -  total flux cleaned = 0.397506 Jy
! Total flux subtracted in 200 components = 0.397506 Jy
! Clean residual min=-0.008740 max=0.022572 Jy/beam
! Clean residual mean=-0.000048 rms=0.002747 Jy/beam
! Combined flux in latest and established models = 0.397506 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.397506 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8146 mas, bmaj=1.982 mas, bpa=-4.699 degrees
! Estimated noise=0.2362 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0477072 Jy
! Component: 100  -  total flux cleaned = 0.073661 Jy
! Component: 150  -  total flux cleaned = 0.088594 Jy
! Component: 200  -  total flux cleaned = 0.097679 Jy
! Total flux subtracted in 200 components = 0.097679 Jy
! Clean residual min=-0.003387 max=0.005159 Jy/beam
! Clean residual mean=-0.000015 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.495185 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 50 components and 0.495185 Jy
! Inverting map 
! Added new window around map position (1.6, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0058803 Jy
! Component: 100  -  total flux cleaned = 0.00966702 Jy
! Component: 150  -  total flux cleaned = 0.0107846 Jy
! Component: 200  -  total flux cleaned = 0.0115255 Jy
! Total flux subtracted in 200 components = 0.0115255 Jy
! Clean residual min=-0.002847 max=0.002155 Jy/beam
! Clean residual mean=-0.000004 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.50671 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 70 components and 0.50671 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.25 mas, bmaj=5.038 mas, bpa=-0.8499 degrees
! Estimated noise=0.312617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151902 Jy
! Component: 100  -  total flux cleaned = 0.00179056 Jy
! Component: 150  -  total flux cleaned = 0.00195526 Jy
! Component: 200  -  total flux cleaned = 0.00208657 Jy
! Total flux subtracted in 200 components = 0.00208657 Jy
! Clean residual min=-0.001407 max=0.001466 Jy/beam
! Clean residual mean=-0.000003 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.508797 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.68909e-05 Jy
! Component: 100  -  total flux cleaned = 5.80608e-05 Jy
! Component: 150  -  total flux cleaned = 1.62796e-05 Jy
! Component: 200  -  total flux cleaned = 1.65839e-05 Jy
! Total flux subtracted in 200 components = 1.65839e-05 Jy
! Clean residual min=-0.001300 max=0.001461 Jy/beam
! Clean residual mean=-0.000003 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.508814 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 87 components and 0.508814 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8146 mas, bmaj=1.982 mas, bpa=-4.699 degrees
! Estimated noise=0.2362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000332512 Jy
! Component: 100  -  total flux cleaned = -0.000214677 Jy
! Component: 150  -  total flux cleaned = -0.000111874 Jy
! Component: 200  -  total flux cleaned = -0.000113118 Jy
! Total flux subtracted in 200 components = -0.000113118 Jy
! Clean residual min=-0.002224 max=0.001672 Jy/beam
! Clean residual mean=-0.000001 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.5087 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 100 components and 0.5087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073123Jy  sigma=1.302062
! Fit after  self-cal, rms=0.073116Jy  sigma=1.301750
wmodel /J1726-2258_X_map.mod
! wmodel: Unable to open new model file: /J1726-2258_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1726-2258_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8146 x 1.982 at -4.699 degrees (North through East)
! Clean map  min=-0.0038479  max=0.30133 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1726-2258_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.301327 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000365133 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.363524 0.363524 0.727048 1.4541 2.90819 5.81639 11.6328 23.2655 46.5311 93.0622
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.301 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  825.254 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1726-2258_X_dfm.log closed on Thu May 19 23:30:32 2016