! Started logfile: /scr/pima/bg219i_uvs/J1724-1443_X_dfm.log on Thu May 19 23:30:13 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1724-1443_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1724-1443_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.801587 visibilities/baseline/integration-bin.
! Found source: J1724-1443
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12120 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1724-1443_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.052325Jy  sigma=23.537924
! Fit after  self-cal, rms=0.736066Jy  sigma=16.217922
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6324 mas, bmaj=1.639 mas, bpa=0.1908 degrees
! Estimated noise=0.522514 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.192553 Jy
! Component: 100  -  total flux cleaned = 0.262464 Jy
! Total flux subtracted in 100 components = 0.262464 Jy
! Clean residual min=-0.011132 max=0.030362 Jy/beam
! Clean residual mean=0.000012 rms=0.002953 Jy/beam
! Combined flux in latest and established models = 0.262464 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.262464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093092Jy  sigma=2.016314
! Fit after  self-cal, rms=0.092583Jy  sigma=2.006849
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0342273 Jy
! Component: 100  -  total flux cleaned = 0.0531054 Jy
! Total flux subtracted in 100 components = 0.0531054 Jy
! Clean residual min=-0.007263 max=0.011297 Jy/beam
! Clean residual mean=0.000006 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 0.315569 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.315569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073197Jy  sigma=1.514010
! Fit after  self-cal, rms=0.072817Jy  sigma=1.507731
! Inverting map 
! Added new window around map position (0, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133013 Jy
! Component: 100  -  total flux cleaned = 0.0213446 Jy
! Total flux subtracted in 100 components = 0.0213446 Jy
! Clean residual min=-0.004763 max=0.006162 Jy/beam
! Clean residual mean=0.000004 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 0.336914 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 23 components and 0.336914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069475Jy  sigma=1.413194
! Fit after  self-cal, rms=0.069239Jy  sigma=1.409224
! Inverting map 
! Added new window around map position (0.6, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.006414 Jy
! Component: 100  -  total flux cleaned = 0.0101782 Jy
! Total flux subtracted in 100 components = 0.0101782 Jy
! Clean residual min=-0.003579 max=0.004688 Jy/beam
! Clean residual mean=0.000003 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.347092 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.347092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068591Jy  sigma=1.388153
! Fit after  self-cal, rms=0.068484Jy  sigma=1.386540
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8389 mas, bmaj=1.985 mas, bpa=-0.4769 degrees
! Estimated noise=0.324641 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, -4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0053493 Jy
! Component: 100  -  total flux cleaned = 0.00840478 Jy
! Component: 150  -  total flux cleaned = 0.0104975 Jy
! Component: 200  -  total flux cleaned = 0.0120746 Jy
! Total flux subtracted in 200 components = 0.0120746 Jy
! Clean residual min=-0.002877 max=0.002932 Jy/beam
! Clean residual mean=0.000005 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.359167 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 52 components and 0.359167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068128Jy  sigma=1.373705
! Fit after  self-cal, rms=0.068081Jy  sigma=1.372842
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8389 x 1.985 at -0.4769 degrees (North through East)
! Clean map  min=-0.0027704  max=0.25881 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.06     KP        1.01     
!   LA        0.99     MK        1.03     NL        1.00     OV        0.97     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.06     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.05     KP        1.03     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.96     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.08     KP        1.02     
!   LA        1.00     MK        0.97     NL        1.00     OV        0.96     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.99     KP        1.02     
!   LA        0.97     MK        1.02     NL        0.99     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.09     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.07     KP        1.00     
!   LA        1.01     MK        1.00     NL        1.00     OV        0.96     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.05     KP        1.00     
!   LA        1.01     MK        0.99     NL        1.00     OV        0.97     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.05     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.02     KP        1.01     
!   LA        0.98     MK        0.98     NL        1.02     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.09     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.99     SC        0.90     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.04     KP        0.98     
!   LA        1.02     MK        1.00     NL        1.01     OV        0.94     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.068081Jy  sigma=1.372842
! Fit after  self-cal, rms=0.068176Jy  sigma=1.359592
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8384 mas, bmaj=1.983 mas, bpa=-0.2709 degrees
! Estimated noise=0.323373 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00077475 Jy
! Component: 100  -  total flux cleaned = 0.000730746 Jy
! Component: 150  -  total flux cleaned = 0.000768548 Jy
! Component: 200  -  total flux cleaned = 0.000737421 Jy
! Total flux subtracted in 200 components = 0.000737421 Jy
! Clean residual min=-0.002443 max=0.002465 Jy/beam
! Clean residual mean=0.000002 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.359904 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 71 components and 0.359904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068119Jy  sigma=1.358475
! Fit after  self-cal, rms=0.068139Jy  sigma=1.358333
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068139Jy  sigma=1.358333
! Fit after  self-cal, rms=0.067837Jy  sigma=1.351437
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.838 mas, bmaj=1.981 mas, bpa=-0.2067 degrees
! Estimated noise=0.322768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000183347 Jy
! Component: 100  -  total flux cleaned = -0.000240299 Jy
! Component: 150  -  total flux cleaned = -0.000314396 Jy
! Component: 200  -  total flux cleaned = -0.000405536 Jy
! Total flux subtracted in 200 components = -0.000405536 Jy
! Clean residual min=-0.001949 max=0.001934 Jy/beam
! Clean residual mean=0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.359499 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 82 components and 0.359499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067811Jy  sigma=1.351003
! Fit after  self-cal, rms=0.067811Jy  sigma=1.350948
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.82982e-06 Jy
! Component: 100  -  total flux cleaned = -6.3747e-05 Jy
! Component: 150  -  total flux cleaned = -0.000102967 Jy
! Component: 200  -  total flux cleaned = -0.000121588 Jy
! Total flux subtracted in 200 components = -0.000121588 Jy
! Clean residual min=-0.001945 max=0.001912 Jy/beam
! Clean residual mean=0.000002 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.359377 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 84 components and 0.359377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067798Jy  sigma=1.350691
! Fit after  self-cal, rms=0.067797Jy  sigma=1.350675
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067797Jy  sigma=1.350675
! Fit after  self-cal, rms=0.067741Jy  sigma=1.350416
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8377 mas, bmaj=1.98 mas, bpa=-0.1501 degrees
! Estimated noise=0.322191 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000538484 Jy
! Component: 100  -  total flux cleaned = -0.00062597 Jy
! Component: 150  -  total flux cleaned = -0.000704171 Jy
! Component: 200  -  total flux cleaned = -0.000777581 Jy
! Total flux subtracted in 200 components = -0.000777581 Jy
! Clean residual min=-0.001912 max=0.001897 Jy/beam
! Clean residual mean=0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.358599 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 89 components and 0.358599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067726Jy  sigma=1.350188
! Fit after  self-cal, rms=0.067726Jy  sigma=1.350170
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.20596e-05 Jy
! Component: 100  -  total flux cleaned = -0.000131943 Jy
! Component: 150  -  total flux cleaned = -0.000181372 Jy
! Component: 200  -  total flux cleaned = -0.000228757 Jy
! Total flux subtracted in 200 components = -0.000228757 Jy
! Clean residual min=-0.001913 max=0.001895 Jy/beam
! Clean residual mean=0.000002 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.358371 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 94 components and 0.358371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067717Jy  sigma=1.350016
! Fit after  self-cal, rms=0.067717Jy  sigma=1.350005
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067717Jy  sigma=1.350005
! Fit after  self-cal, rms=0.067651Jy  sigma=1.349964
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=4.341 mas, bpa=5.243 degrees
! Estimated noise=0.414766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000760907 Jy
! Component: 100  -  total flux cleaned = -0.000878806 Jy
! Component: 150  -  total flux cleaned = -0.000901069 Jy
! Component: 200  -  total flux cleaned = -0.000929294 Jy
! Total flux subtracted in 200 components = -0.000929294 Jy
! Clean residual min=-0.002083 max=0.002035 Jy/beam
! Clean residual mean=0.000004 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.357441 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 103 components and 0.357441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067644Jy  sigma=1.349940
! Fit after  self-cal, rms=0.067643Jy  sigma=1.349918
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.7287e-05 Jy
! Component: 100  -  total flux cleaned = -3.67493e-05 Jy
! Component: 150  -  total flux cleaned = -5.32098e-05 Jy
! Component: 200  -  total flux cleaned = -7.43372e-05 Jy
! Total flux subtracted in 200 components = -7.43372e-05 Jy
! Clean residual min=-0.002078 max=0.002030 Jy/beam
! Clean residual mean=0.000004 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.357367 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 106 components and 0.357367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067642Jy  sigma=1.349884
! Fit after  self-cal, rms=0.067641Jy  sigma=1.349871
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8377 mas, bmaj=1.98 mas, bpa=-0.1217 degrees
! Estimated noise=0.321719 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8377 x 1.98 at -0.1217 degrees (North through East)
! Clean map  min=-0.0017681  max=0.25754 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6311 mas, bmaj=1.635 mas, bpa=0.5055 degrees
! Estimated noise=0.517939 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.191562 Jy
! Component: 100  -  total flux cleaned = 0.263575 Jy
! Component: 150  -  total flux cleaned = 0.298399 Jy
! Component: 200  -  total flux cleaned = 0.317884 Jy
! Total flux subtracted in 200 components = 0.317884 Jy
! Clean residual min=-0.004194 max=0.009719 Jy/beam
! Clean residual mean=0.000004 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.317884 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.317884 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8377 mas, bmaj=1.98 mas, bpa=-0.1217 degrees
! Estimated noise=0.321719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166595 Jy
! Component: 100  -  total flux cleaned = 0.0249278 Jy
! Component: 150  -  total flux cleaned = 0.0299129 Jy
! Component: 200  -  total flux cleaned = 0.0331335 Jy
! Total flux subtracted in 200 components = 0.0331335 Jy
! Clean residual min=-0.002092 max=0.002088 Jy/beam
! Clean residual mean=0.000002 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.351017 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 58 components and 0.351017 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=4.341 mas, bpa=5.243 degrees
! Estimated noise=0.414766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00302845 Jy
! Component: 100  -  total flux cleaned = 0.004513 Jy
! Component: 150  -  total flux cleaned = 0.00537981 Jy
! Component: 200  -  total flux cleaned = 0.00582573 Jy
! Total flux subtracted in 200 components = 0.00582573 Jy
! Clean residual min=-0.001985 max=0.001982 Jy/beam
! Clean residual mean=0.000004 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.356843 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143192 Jy
! Component: 100  -  total flux cleaned = 0.000235597 Jy
! Component: 150  -  total flux cleaned = 0.000329077 Jy
! Component: 200  -  total flux cleaned = 0.000399162 Jy
! Total flux subtracted in 200 components = 0.000399162 Jy
! Clean residual min=-0.002019 max=0.002025 Jy/beam
! Clean residual mean=0.000004 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.357242 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 88 components and 0.357242 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8377 mas, bmaj=1.98 mas, bpa=-0.1217 degrees
! Estimated noise=0.321719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000254133 Jy
! Component: 100  -  total flux cleaned = 0.000318149 Jy
! Component: 150  -  total flux cleaned = 0.000376144 Jy
! Component: 200  -  total flux cleaned = 0.000375409 Jy
! Total flux subtracted in 200 components = 0.000375409 Jy
! Clean residual min=-0.001841 max=0.001823 Jy/beam
! Clean residual mean=0.000002 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.357618 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 99 components and 0.357618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067662Jy  sigma=1.350159
! Fit after  self-cal, rms=0.067658Jy  sigma=1.350095
wmodel /J1724-1443_X_map.mod
! wmodel: Unable to open new model file: /J1724-1443_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1724-1443_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8377 x 1.98 at -0.1217 degrees (North through East)
! Clean map  min=-0.0016852  max=0.25724 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1724-1443_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.257241 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000449338 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.524028 0.524028 1.04806 2.09611 4.19222 8.38444 16.7689 33.5378 67.0756
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.257 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  572.488 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1724-1443_X_dfm.log closed on Thu May 19 23:30:15 2016