! Started logfile: /scr/pima/bg219i_uvs/J1714-2053_X_dfm.log on Thu May 19 23:29:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1714-2053_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1714-2053_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.792308 visibilities/baseline/integration-bin.
! Found source: J1714-2053
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22248 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1714-2053_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003123Jy  sigma=22.827098
! Fit after  self-cal, rms=0.918952Jy  sigma=20.861656
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6585 mas, bmaj=1.623 mas, bpa=-4.488 degrees
! Estimated noise=0.400044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0594763 Jy
! Component: 100  -  total flux cleaned = 0.0776456 Jy
! Total flux subtracted in 100 components = 0.0776456 Jy
! Clean residual min=-0.003595 max=0.008136 Jy/beam
! Clean residual mean=-0.000017 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.0776456 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0776456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069096Jy  sigma=1.427353
! Fit after  self-cal, rms=0.068435Jy  sigma=1.412216
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00970624 Jy
! Component: 100  -  total flux cleaned = 0.0152585 Jy
! Total flux subtracted in 100 components = 0.0152585 Jy
! Clean residual min=-0.002409 max=0.002800 Jy/beam
! Clean residual mean=-0.000007 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.092904 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.092904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066554Jy  sigma=1.360907
! Fit after  self-cal, rms=0.066541Jy  sigma=1.360405
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8287 mas, bmaj=1.971 mas, bpa=-4.94 degrees
! Estimated noise=0.226961 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0049286 Jy
! Component: 100  -  total flux cleaned = 0.00712487 Jy
! Component: 150  -  total flux cleaned = 0.00814803 Jy
! Component: 200  -  total flux cleaned = 0.00863513 Jy
! Total flux subtracted in 200 components = 0.00863513 Jy
! Clean residual min=-0.001355 max=0.001415 Jy/beam
! Clean residual mean=-0.000002 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.101539 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 29 components and 0.101539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066248Jy  sigma=1.351876
! Fit after  self-cal, rms=0.066240Jy  sigma=1.351701
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8287 x 1.971 at -4.94 degrees (North through East)
! Clean map  min=-0.0012984  max=0.083459 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.18     KP        1.00     
!   LA        1.02     MK        1.04     NL        1.02     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.12     KP        0.97     
!   LA        0.99     MK        1.06     NL        1.03     OV        0.97     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.93     KP        1.02     
!   LA        0.99     MK        0.98     NL        1.02     OV        0.97     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.06     KP        1.00     
!   LA        0.99     MK        0.96     NL        1.02     OV        0.97     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.98     MK        1.07     NL        1.03     OV        0.99     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        1.03     KP        0.99     
!   LA        0.95     MK        1.01     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.02     KP        0.99     
!   LA        1.00     MK        0.97     NL        1.06     OV        0.97     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.10     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.99     SC        0.93     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.92     KP        0.98     
!   LA        1.02     MK        0.98     NL        1.03     OV        0.99     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.92     KP        0.99     
!   LA        0.98     MK        0.94     NL        1.03     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.11     KP        0.97     
!   LA        0.99     MK        1.05     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.04     HN        0.99     KP        1.02     
!   LA        0.96     MK        1.02     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.066240Jy  sigma=1.351701
! Fit after  self-cal, rms=0.066555Jy  sigma=1.349368
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8308 mas, bmaj=1.971 mas, bpa=-4.744 degrees
! Estimated noise=0.226618 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000194185 Jy
! Component: 100  -  total flux cleaned = -0.000274206 Jy
! Component: 150  -  total flux cleaned = -0.000302818 Jy
! Component: 200  -  total flux cleaned = -0.000311585 Jy
! Total flux subtracted in 200 components = -0.000311585 Jy
! Clean residual min=-0.001245 max=0.001315 Jy/beam
! Clean residual mean=0.000000 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.101228 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 34 components and 0.101228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066550Jy  sigma=1.349318
! Fit after  self-cal, rms=0.066567Jy  sigma=1.349226
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066567Jy  sigma=1.349226
! Fit after  self-cal, rms=0.066671Jy  sigma=1.347488
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8311 mas, bmaj=1.971 mas, bpa=-4.665 degrees
! Estimated noise=0.226596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.74141e-05 Jy
! Component: 100  -  total flux cleaned = -0.000108242 Jy
! Component: 150  -  total flux cleaned = -0.000116997 Jy
! Component: 200  -  total flux cleaned = -0.00011684 Jy
! Total flux subtracted in 200 components = -0.00011684 Jy
! Clean residual min=-0.001229 max=0.001259 Jy/beam
! Clean residual mean=0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.101111 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 34 components and 0.101111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066667Jy  sigma=1.347449
! Fit after  self-cal, rms=0.066671Jy  sigma=1.347424
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.223e-05 Jy
! Component: 100  -  total flux cleaned = -4.052e-05 Jy
! Component: 150  -  total flux cleaned = -4.81453e-05 Jy
! Component: 200  -  total flux cleaned = -5.54804e-05 Jy
! Total flux subtracted in 200 components = -5.54804e-05 Jy
! Clean residual min=-0.001223 max=0.001257 Jy/beam
! Clean residual mean=0.000000 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.101055 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 34 components and 0.101055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066668Jy  sigma=1.347401
! Fit after  self-cal, rms=0.066669Jy  sigma=1.347394
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066669Jy  sigma=1.347394
! Fit after  self-cal, rms=0.067094Jy  sigma=1.346622
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8312 mas, bmaj=1.972 mas, bpa=-4.583 degrees
! Estimated noise=0.226882 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.91028e-05 Jy
! Component: 100  -  total flux cleaned = 8.02958e-05 Jy
! Component: 150  -  total flux cleaned = 7.99271e-05 Jy
! Component: 200  -  total flux cleaned = 7.31692e-05 Jy
! Total flux subtracted in 200 components = 7.31692e-05 Jy
! Clean residual min=-0.001249 max=0.001253 Jy/beam
! Clean residual mean=0.000001 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.101128 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 34 components and 0.101128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067091Jy  sigma=1.346592
! Fit after  self-cal, rms=0.067102Jy  sigma=1.346558
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.18584e-06 Jy
! Component: 100  -  total flux cleaned = -2.06819e-05 Jy
! Component: 150  -  total flux cleaned = -2.67105e-05 Jy
! Component: 200  -  total flux cleaned = -3.25124e-05 Jy
! Total flux subtracted in 200 components = -3.25124e-05 Jy
! Clean residual min=-0.001245 max=0.001248 Jy/beam
! Clean residual mean=0.000001 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.101096 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 34 components and 0.101096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067100Jy  sigma=1.346544
! Fit after  self-cal, rms=0.067100Jy  sigma=1.346539
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067100Jy  sigma=1.346539
! Fit after  self-cal, rms=0.067218Jy  sigma=1.346659
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.272 mas, bmaj=4.913 mas, bpa=0.993 degrees
! Estimated noise=0.29548 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.24295e-05 Jy
! Component: 100  -  total flux cleaned = -1.47822e-05 Jy
! Component: 150  -  total flux cleaned = -9.28361e-06 Jy
! Component: 200  -  total flux cleaned = -9.48597e-06 Jy
! Total flux subtracted in 200 components = -9.48597e-06 Jy
! Clean residual min=-0.001299 max=0.001254 Jy/beam
! Clean residual mean=0.000002 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.101086 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 42 components and 0.101086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067219Jy  sigma=1.346664
! Fit after  self-cal, rms=0.067216Jy  sigma=1.346645
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.91406e-05 Jy
! Component: 100  -  total flux cleaned = -5.79635e-05 Jy
! Component: 150  -  total flux cleaned = -5.29948e-05 Jy
! Component: 200  -  total flux cleaned = -5.28833e-05 Jy
! Total flux subtracted in 200 components = -5.28833e-05 Jy
! Clean residual min=-0.001296 max=0.001250 Jy/beam
! Clean residual mean=0.000002 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.101034 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 44 components and 0.101033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067217Jy  sigma=1.346659
! Fit after  self-cal, rms=0.067215Jy  sigma=1.346653
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8315 mas, bmaj=1.972 mas, bpa=-4.569 degrees
! Estimated noise=0.227318 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8315 x 1.972 at -4.569 degrees (North through East)
! Clean map  min=-0.0011452  max=0.084261 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.66 mas, bmaj=1.623 mas, bpa=-4.14 degrees
! Estimated noise=0.401307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0597672 Jy
! Component: 100  -  total flux cleaned = 0.0786371 Jy
! Component: 150  -  total flux cleaned = 0.0883199 Jy
! Component: 200  -  total flux cleaned = 0.0938499 Jy
! Total flux subtracted in 200 components = 0.0938499 Jy
! Clean residual min=-0.002314 max=0.002723 Jy/beam
! Clean residual mean=-0.000005 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.0938499 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0938499 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8315 mas, bmaj=1.972 mas, bpa=-4.569 degrees
! Estimated noise=0.227318 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00445313 Jy
! Component: 100  -  total flux cleaned = 0.0064079 Jy
! Component: 150  -  total flux cleaned = 0.00731049 Jy
! Component: 200  -  total flux cleaned = 0.0074415 Jy
! Total flux subtracted in 200 components = 0.0074415 Jy
! Clean residual min=-0.001267 max=0.001291 Jy/beam
! Clean residual mean=0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.101291 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 28 components and 0.101291 Jy
! Inverting map 
! Added new window around map position (1.8, -21.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109202 Jy
! Component: 100  -  total flux cleaned = 0.00120033 Jy
! Component: 150  -  total flux cleaned = 0.00113748 Jy
! Component: 200  -  total flux cleaned = 0.00106446 Jy
! Total flux subtracted in 200 components = 0.00106446 Jy
! Clean residual min=-0.001241 max=0.001239 Jy/beam
! Clean residual mean=0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.102356 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 47 components and 0.102356 Jy
! Inverting map 
! Added new window around map position (-1.6, 34.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000722305 Jy
! Component: 100  -  total flux cleaned = 0.000705045 Jy
! Component: 150  -  total flux cleaned = 0.000685861 Jy
! Component: 200  -  total flux cleaned = 0.000652326 Jy
! Total flux subtracted in 200 components = 0.000652326 Jy
! Clean residual min=-0.001167 max=0.001173 Jy/beam
! Clean residual mean=-0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.103008 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.103008 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.272 mas, bmaj=4.913 mas, bpa=0.993 degrees
! Estimated noise=0.29548 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013493 Jy
! Component: 100  -  total flux cleaned = -0.000183863 Jy
! Component: 150  -  total flux cleaned = -0.000146292 Jy
! Component: 200  -  total flux cleaned = -0.000113088 Jy
! Total flux subtracted in 200 components = -0.000113088 Jy
! Clean residual min=-0.001186 max=0.001228 Jy/beam
! Clean residual mean=0.000000 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.102895 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.03232e-05 Jy
! Component: 100  -  total flux cleaned = -2.96301e-05 Jy
! Component: 150  -  total flux cleaned = -5.62636e-05 Jy
! Component: 200  -  total flux cleaned = -8.1588e-05 Jy
! Total flux subtracted in 200 components = -8.1588e-05 Jy
! Clean residual min=-0.001161 max=0.001224 Jy/beam
! Clean residual mean=-0.000000 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.102813 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 75 components and 0.102814 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8315 mas, bmaj=1.972 mas, bpa=-4.569 degrees
! Estimated noise=0.227318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.06979e-05 Jy
! Component: 100  -  total flux cleaned = -0.000107023 Jy
! Component: 150  -  total flux cleaned = -0.000136131 Jy
! Component: 200  -  total flux cleaned = -0.000163488 Jy
! Total flux subtracted in 200 components = -0.000163488 Jy
! Clean residual min=-0.001117 max=0.001202 Jy/beam
! Clean residual mean=-0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.10265 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 91 components and 0.10265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067172Jy  sigma=1.345706
! Fit after  self-cal, rms=0.067170Jy  sigma=1.345580
wmodel /J1714-2053_X_map.mod
! wmodel: Unable to open new model file: /J1714-2053_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1714-2053_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8315 x 1.972 at -4.569 degrees (North through East)
! Clean map  min=-0.0010354  max=0.083752 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1714-2053_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0837518 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000270406 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.968596 0.968596 1.93719 3.87439 7.74877 15.4975 30.9951 61.9902
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.083 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  309.726 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1714-2053_X_dfm.log closed on Thu May 19 23:29:43 2016