! Started logfile: /scr/pima/bg219i_uvs/J1705+5109_X_dfm.log on Thu May 19 23:29:17 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1705+5109_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1705+5109_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! AN table 2: 29 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.903509 visibilities/baseline/integration-bin.
! Found source: J1705+5109
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22248 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1705+5109_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 9.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 10.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 11.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 12.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.003921Jy  sigma=24.799931
! Fit after  self-cal, rms=0.909550Jy  sigma=22.437044
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7869 mas, bmaj=0.9131 mas, bpa=-15.15 degrees
! Estimated noise=0.501477 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0673862 Jy
! Component: 100  -  total flux cleaned = 0.0836805 Jy
! Total flux subtracted in 100 components = 0.0836805 Jy
! Clean residual min=-0.003992 max=0.006730 Jy/beam
! Clean residual mean=0.000025 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.0836804 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0836804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061370Jy  sigma=1.437218
! Fit after  self-cal, rms=0.061110Jy  sigma=1.431221
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00811423 Jy
! Component: 100  -  total flux cleaned = 0.0125198 Jy
! Total flux subtracted in 100 components = 0.0125198 Jy
! Clean residual min=-0.003505 max=0.005525 Jy/beam
! Clean residual mean=0.000017 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.0962002 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 13 components and 0.0962002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059531Jy  sigma=1.386532
! Fit after  self-cal, rms=0.059518Jy  sigma=1.385979
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.109 mas, bmaj=1.222 mas, bpa=-7.151 degrees
! Estimated noise=0.198698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00828361 Jy
! Component: 100  -  total flux cleaned = 0.0128578 Jy
! Component: 150  -  total flux cleaned = 0.0158502 Jy
! Component: 200  -  total flux cleaned = 0.0178759 Jy
! Total flux subtracted in 200 components = 0.0178759 Jy
! Clean residual min=-0.001691 max=0.002087 Jy/beam
! Clean residual mean=0.000017 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.114076 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 39 components and 0.114076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058363Jy  sigma=1.353385
! Fit after  self-cal, rms=0.058271Jy  sigma=1.350711
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.109 x 1.222 at -7.151 degrees (North through East)
! Clean map  min=-0.001409  max=0.091532 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     KP        0.99     LA        0.97     
!   MK        0.99     NL        1.01     OV        1.02     PT        0.97     
!   SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        1.05     HN        1.01     KP        1.04     
!   LA        0.93     MK        1.06     NL        0.99     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     KP        1.01     LA        0.97     
!   MK        0.99     NL        1.03     OV        1.04     PT        0.99     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.03     HN        1.00     KP        1.00     
!   LA        0.95     MK        1.04     NL        0.98     PT        0.93     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     KP        1.01     LA        0.98     
!   MK        1.03     NL        1.03     OV        1.01     PT        0.95     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.00     HN        1.02     KP        1.03     
!   LA        1.00     MK        1.03     NL        1.01     PT        0.95     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     KP        1.05     LA        0.93     
!   MK        1.06     NL        1.01     OV        0.96     PT        0.97     
!   SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.08     HN        0.98     KP        1.03     
!   LA        0.94     MK        1.01     NL        1.02     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     KP        1.00     LA        0.96     
!   MK        1.06     NL        0.98     OV        1.03     PT        1.00     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.01     HN        0.97     KP        1.08     
!   LA        0.91     MK        0.97     NL        1.02     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     KP        1.00     LA        0.99     
!   MK        0.96     NL        0.96     OV        1.03     PT        0.93     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.98     HN        0.96     KP        0.96     
!   LA        0.95     MK        1.02     NL        1.00     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     KP        1.01     LA        0.98     
!   MK        1.04     NL        0.97     OV        1.00     PT        1.01     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.02     HN        0.96     KP        1.00     
!   LA        0.96     MK        1.07     NL        0.99     PT        1.05     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     KP        1.00     LA        0.95     
!   MK        1.04     NL        0.97     OV        0.96     PT        0.95     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.06     HN        1.00     KP        1.03     
!   LA        0.98     MK        1.01     NL        0.99     PT        1.00     
!   SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     KP        1.01     LA        0.96     
!   MK        0.99     NL        0.96     OV        1.03     PT        0.93     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.93     HN        1.01     KP        0.97     
!   LA        1.00     MK        1.04     NL        1.00     PT        0.94     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     KP        0.95     LA        1.00     
!   MK        1.04     NL        0.98     OV        1.00     PT        0.94     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.01     HN        1.05     KP        0.97     
!   LA        1.01     MK        0.96     NL        1.03     PT        0.90     
!   SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     KP        1.01     LA        0.94     
!   MK        1.03     NL        1.02     OV        1.12     PT        0.91     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.93     HN        1.00     KP        0.99     
!   LA        0.97     MK        0.99     NL        1.05     PT        0.96     
!   SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     KP        0.96     LA        0.99     
!   MK        0.97     NL        1.00     OV        0.99     PT        0.93     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.99     HN        0.96     KP        0.98     
!   LA        0.93     MK        0.99     NL        1.03     PT        0.90     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.058271Jy  sigma=1.350711
! Fit after  self-cal, rms=0.057551Jy  sigma=1.345294
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=1.229 mas, bpa=-7.273 degrees
! Estimated noise=0.196699 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144558 Jy
! Component: 100  -  total flux cleaned = 0.00165908 Jy
! Component: 150  -  total flux cleaned = 0.00161227 Jy
! Component: 200  -  total flux cleaned = 0.00151131 Jy
! Total flux subtracted in 200 components = 0.00151131 Jy
! Clean residual min=-0.001142 max=0.001285 Jy/beam
! Clean residual mean=-0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.115587 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 53 components and 0.115587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057512Jy  sigma=1.344258
! Fit after  self-cal, rms=0.057525Jy  sigma=1.344037
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057525Jy  sigma=1.344037
! Fit after  self-cal, rms=0.057487Jy  sigma=1.343918
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=1.228 mas, bpa=-7.348 degrees
! Estimated noise=0.196807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000682572 Jy
! Component: 100  -  total flux cleaned = 0.000786731 Jy
! Component: 150  -  total flux cleaned = 0.000739196 Jy
! Component: 200  -  total flux cleaned = 0.000697661 Jy
! Total flux subtracted in 200 components = 0.000697661 Jy
! Clean residual min=-0.001119 max=0.001201 Jy/beam
! Clean residual mean=0.000000 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.116285 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 61 components and 0.116285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057473Jy  sigma=1.343562
! Fit after  self-cal, rms=0.057472Jy  sigma=1.343527
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.2, 9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000507966 Jy
! Component: 100  -  total flux cleaned = 0.000646963 Jy
! Component: 150  -  total flux cleaned = 0.000684063 Jy
! Component: 200  -  total flux cleaned = 0.000683692 Jy
! Total flux subtracted in 200 components = 0.000683692 Jy
! Clean residual min=-0.001058 max=0.001128 Jy/beam
! Clean residual mean=-0.000001 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.116969 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 0.116969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057449Jy  sigma=1.342942
! Fit after  self-cal, rms=0.057445Jy  sigma=1.342907
! Inverting map 
! Added new window around map position (32.8, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00059687 Jy
! Component: 100  -  total flux cleaned = 0.000589855 Jy
! Component: 150  -  total flux cleaned = 0.000646688 Jy
! Component: 200  -  total flux cleaned = 0.000647123 Jy
! Total flux subtracted in 200 components = 0.000647123 Jy
! Clean residual min=-0.001020 max=0.001057 Jy/beam
! Clean residual mean=-0.000001 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.117616 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 94 components and 0.117616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057422Jy  sigma=1.342390
! Fit after  self-cal, rms=0.057419Jy  sigma=1.342352
! Inverting map 
! Added new window around map position (45.8, -50.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000405801 Jy
! Component: 100  -  total flux cleaned = 0.000387005 Jy
! Component: 150  -  total flux cleaned = 0.000385311 Jy
! Component: 200  -  total flux cleaned = 0.000417652 Jy
! Total flux subtracted in 200 components = 0.000417652 Jy
! Clean residual min=-0.000919 max=0.001025 Jy/beam
! Clean residual mean=-0.000002 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.118034 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.118034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057399Jy  sigma=1.341909
! Fit after  self-cal, rms=0.057398Jy  sigma=1.341876
! Inverting map 
! Added new window around map position (28, -38.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00053716 Jy
! Component: 100  -  total flux cleaned = 0.000689259 Jy
! Component: 150  -  total flux cleaned = 0.000778985 Jy
! Component: 200  -  total flux cleaned = 0.000812466 Jy
! Total flux subtracted in 200 components = 0.000812466 Jy
! Clean residual min=-0.000919 max=0.000928 Jy/beam
! Clean residual mean=-0.000001 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.118846 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 116 components and 0.118846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057377Jy  sigma=1.341424
! Fit after  self-cal, rms=0.057375Jy  sigma=1.341398
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057375Jy  sigma=1.341398
! Fit after  self-cal, rms=0.057330Jy  sigma=1.341337
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.117 mas, bmaj=1.227 mas, bpa=-7.276 degrees
! Estimated noise=0.196701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161153 Jy
! Component: 100  -  total flux cleaned = 0.000346863 Jy
! Component: 150  -  total flux cleaned = 0.000482292 Jy
! Component: 200  -  total flux cleaned = 0.000524587 Jy
! Total flux subtracted in 200 components = 0.000524587 Jy
! Clean residual min=-0.000868 max=0.000916 Jy/beam
! Clean residual mean=-0.000000 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.119371 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 128 components and 0.119371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057321Jy  sigma=1.341146
! Fit after  self-cal, rms=0.057322Jy  sigma=1.341138
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112351 Jy
! Component: 100  -  total flux cleaned = 0.000151728 Jy
! Component: 150  -  total flux cleaned = 0.000164641 Jy
! Component: 200  -  total flux cleaned = 0.000189138 Jy
! Total flux subtracted in 200 components = 0.000189138 Jy
! Clean residual min=-0.000852 max=0.000893 Jy/beam
! Clean residual mean=-0.000001 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.11956 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 135 components and 0.11956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057316Jy  sigma=1.341023
! Fit after  self-cal, rms=0.057316Jy  sigma=1.341026
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057316Jy  sigma=1.341026
! Fit after  self-cal, rms=0.057316Jy  sigma=1.341002
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.301 mas, bmaj=2.506 mas, bpa=71.49 degrees
! Estimated noise=0.240423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000295417 Jy
! Component: 100  -  total flux cleaned = 0.000393378 Jy
! Component: 150  -  total flux cleaned = 0.000428992 Jy
! Component: 200  -  total flux cleaned = 0.000399044 Jy
! Total flux subtracted in 200 components = 0.000399044 Jy
! Clean residual min=-0.000834 max=0.000966 Jy/beam
! Clean residual mean=-0.000002 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.119959 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 147 components and 0.119959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057314Jy  sigma=1.340933
! Fit after  self-cal, rms=0.057313Jy  sigma=1.340918
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.76483e-05 Jy
! Component: 100  -  total flux cleaned = -1.96962e-06 Jy
! Component: 150  -  total flux cleaned = -2.81379e-05 Jy
! Component: 200  -  total flux cleaned = -6.03505e-05 Jy
! Total flux subtracted in 200 components = -6.03505e-05 Jy
! Clean residual min=-0.000820 max=0.000927 Jy/beam
! Clean residual mean=-0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.119898 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 154 components and 0.119898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057312Jy  sigma=1.340892
! Fit after  self-cal, rms=0.057312Jy  sigma=1.340888
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=1.227 mas, bpa=-7.416 degrees
! Estimated noise=0.196716 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.116 x 1.227 at -7.416 degrees (North through East)
! Clean map  min=-0.0012033  max=0.090726 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.791 mas, bmaj=0.9142 mas, bpa=-14.77 degrees
! Estimated noise=0.498575 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0669304 Jy
! Component: 100  -  total flux cleaned = 0.0835896 Jy
! Component: 150  -  total flux cleaned = 0.0917604 Jy
! Component: 200  -  total flux cleaned = 0.0974927 Jy
! Total flux subtracted in 200 components = 0.0974927 Jy
! Clean residual min=-0.003323 max=0.003303 Jy/beam
! Clean residual mean=0.000013 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.0974928 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0974928 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=1.227 mas, bpa=-7.416 degrees
! Estimated noise=0.196716 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00763654 Jy
! Component: 100  -  total flux cleaned = 0.012022 Jy
! Component: 150  -  total flux cleaned = 0.0147796 Jy
! Component: 200  -  total flux cleaned = 0.0166113 Jy
! Total flux subtracted in 200 components = 0.0166113 Jy
! Clean residual min=-0.001333 max=0.001402 Jy/beam
! Clean residual mean=0.000007 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.114104 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 43 components and 0.114104 Jy
! Inverting map 
! Added new window around map position (44.2, -21.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136904 Jy
! Component: 100  -  total flux cleaned = 0.00229562 Jy
! Component: 150  -  total flux cleaned = 0.00305449 Jy
! Component: 200  -  total flux cleaned = 0.00376069 Jy
! Total flux subtracted in 200 components = 0.00376069 Jy
! Clean residual min=-0.001088 max=0.001042 Jy/beam
! Clean residual mean=0.000002 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.117865 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 54 components and 0.117865 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.301 mas, bmaj=2.506 mas, bpa=71.49 degrees
! Estimated noise=0.240423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101459 Jy
! Component: 100  -  total flux cleaned = 0.00121057 Jy
! Component: 150  -  total flux cleaned = 0.00137606 Jy
! Component: 200  -  total flux cleaned = 0.00147292 Jy
! Total flux subtracted in 200 components = 0.00147292 Jy
! Clean residual min=-0.000919 max=0.000966 Jy/beam
! Clean residual mean=-0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.119338 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.29323e-05 Jy
! Component: 100  -  total flux cleaned = 0.000101624 Jy
! Component: 150  -  total flux cleaned = 0.000155847 Jy
! Component: 200  -  total flux cleaned = 0.000205662 Jy
! Total flux subtracted in 200 components = 0.000205662 Jy
! Clean residual min=-0.000857 max=0.000905 Jy/beam
! Clean residual mean=-0.000001 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.119543 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 86 components and 0.119543 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.116 mas, bmaj=1.227 mas, bpa=-7.416 degrees
! Estimated noise=0.196716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000446345 Jy
! Component: 100  -  total flux cleaned = 0.000472128 Jy
! Component: 150  -  total flux cleaned = 0.000518548 Jy
! Component: 200  -  total flux cleaned = 0.00049714 Jy
! Total flux subtracted in 200 components = 0.00049714 Jy
! Clean residual min=-0.000855 max=0.000951 Jy/beam
! Clean residual mean=-0.000001 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.12004 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 104 components and 0.12004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057334Jy  sigma=1.341390
! Fit after  self-cal, rms=0.057330Jy  sigma=1.341304
wmodel /J1705+5109_X_map.mod
! wmodel: Unable to open new model file: /J1705+5109_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1705+5109_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.116 x 1.227 at -7.416 degrees (North through East)
! Clean map  min=-0.00094699  max=0.090703 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1705+5109_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0907033 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000216046 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.714569 0.714569 1.42914 2.85828 5.71655 11.4331 22.8662 45.7324 91.4648
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.09 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  419.833 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1705+5109_X_dfm.log closed on Thu May 19 23:29:21 2016