! Started logfile: /scr/pima/bg219i_uvs/J1639+5357_X_uvs.log on Wed Apr  6 23:50:05 2016
obs /scr/pima/bg219i_uvs/J1639+5357_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1639+5357_X_uva.fits
! AN table 1: 21 integrations on 36 of 36 possible baselines.
! AN table 2: 21 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.884259 visibilities/baseline/integration-bin.
! Found source: J1639+5357
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16044 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1639+5357_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.998290Jy  sigma=25.452707
! Fit after  self-cal, rms=0.838943Jy  sigma=21.244806
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9172 mas, bmaj=1.059 mas, bpa=30.5 degrees
! Estimated noise=0.563763 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116554 Jy
! Component: 100  -  total flux cleaned = 0.159072 Jy
! Total flux subtracted in 100 components = 0.159072 Jy
! Clean residual min=-0.011573 max=0.032198 Jy/beam
! Clean residual mean=0.000046 rms=0.003375 Jy/beam
! Combined flux in latest and established models = 0.159072 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.159072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.079378Jy  sigma=1.965866
! Fit after  self-cal, rms=0.079282Jy  sigma=1.958042
! Inverting map 
! Added new window around map position (0.8, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0308858 Jy
! Component: 100  -  total flux cleaned = 0.0478405 Jy
! Total flux subtracted in 100 components = 0.0478405 Jy
! Clean residual min=-0.006959 max=0.013659 Jy/beam
! Clean residual mean=0.000024 rms=0.001881 Jy/beam
! Combined flux in latest and established models = 0.206912 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.206912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062489Jy  sigma=1.534597
! Fit after  self-cal, rms=0.061677Jy  sigma=1.510842
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133048 Jy
! Component: 100  -  total flux cleaned = 0.0204924 Jy
! Total flux subtracted in 100 components = 0.0204924 Jy
! Clean residual min=-0.006270 max=0.007618 Jy/beam
! Clean residual mean=0.000015 rms=0.001381 Jy/beam
! Combined flux in latest and established models = 0.227405 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 27 components and 0.227405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057462Jy  sigma=1.404361
! Fit after  self-cal, rms=0.057203Jy  sigma=1.397302
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.221 mas, bmaj=1.286 mas, bpa=15.12 degrees
! Estimated noise=0.299892 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00965429 Jy
! Component: 100  -  total flux cleaned = 0.0148052 Jy
! Component: 150  -  total flux cleaned = 0.0171085 Jy
! Component: 200  -  total flux cleaned = 0.0184079 Jy
! Total flux subtracted in 200 components = 0.0184079 Jy
! Clean residual min=-0.002998 max=0.004753 Jy/beam
! Clean residual mean=0.000021 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.245813 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 40 components and 0.245812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055519Jy  sigma=1.353894
! Fit after  self-cal, rms=0.055426Jy  sigma=1.351249
! Inverting map 
! Added new window around map position (2.4, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00471284 Jy
! Component: 100  -  total flux cleaned = 0.00648198 Jy
! Component: 150  -  total flux cleaned = 0.00689542 Jy
! Component: 200  -  total flux cleaned = 0.00713522 Jy
! Total flux subtracted in 200 components = 0.00713522 Jy
! Clean residual min=-0.002309 max=0.002548 Jy/beam
! Clean residual mean=0.000015 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.252948 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 0.252948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055023Jy  sigma=1.340043
! Fit after  self-cal, rms=0.054997Jy  sigma=1.339292
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.221 x 1.286 at 15.12 degrees (North through East)
! Clean map  min=-0.0021261  max=0.14496 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     KP        1.01     LA        1.00     
!   MK        1.04     NL        1.03     OV        1.00     PT        0.97     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.05     HN        1.04     KP        0.98     
!   LA        1.01     MK        1.02     NL        1.00     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     KP        0.98     LA        0.98     
!   MK        1.04     NL        0.99     OV        1.00     PT        1.01     
!   SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.03     HN        1.04     KP        1.02     
!   LA        0.96     MK        0.98     NL        0.99     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     KP        1.00     LA        0.97     
!   MK        1.00     NL        1.01     OV        1.00     PT        0.97     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.03     HN        0.97     KP        1.00     
!   LA        0.99     MK        1.03     NL        1.01     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     KP        1.00     LA        1.00     
!   MK        0.97     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.96     MK        0.91     NL        1.00     PT        0.99     
!   SC        1.00     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     KP        1.02     LA        1.00     
!   MK        1.00     NL        1.01     OV        0.99     PT        0.97     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.00     HN        0.99     KP        1.05     
!   LA        0.97     MK        1.01     NL        0.95     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     KP        1.01     LA        1.01     
!   MK        0.99     NL        1.00     OV        0.98     PT        0.99     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.05     HN        1.00     KP        1.01     
!   LA        0.99     MK        0.90     NL        1.04     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     KP        1.02     LA        0.99     
!   MK        1.01     NL        1.01     OV        1.00     PT        0.98     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.00     HN        1.02     KP        0.96     
!   LA        1.00     MK        1.02     NL        1.01     PT        1.00     
!   SC        1.05     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054997Jy  sigma=1.339292
! Fit after  self-cal, rms=0.055030Jy  sigma=1.332856
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.222 mas, bmaj=1.284 mas, bpa=9.859 degrees
! Estimated noise=0.299758 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.28696e-05 Jy
! Component: 100  -  total flux cleaned = -0.000286524 Jy
! Component: 150  -  total flux cleaned = -0.00028589 Jy
! Component: 200  -  total flux cleaned = -0.000246728 Jy
! Total flux subtracted in 200 components = -0.000246728 Jy
! Clean residual min=-0.002083 max=0.002354 Jy/beam
! Clean residual mean=0.000007 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.252701 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.252701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054961Jy  sigma=1.331007
! Fit after  self-cal, rms=0.054966Jy  sigma=1.330876
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054966Jy  sigma=1.330876
! Fit after  self-cal, rms=0.054923Jy  sigma=1.330845
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.223 mas, bmaj=1.284 mas, bpa=8.591 degrees
! Estimated noise=0.299692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.16433e-05 Jy
! Component: 100  -  total flux cleaned = -2.22812e-05 Jy
! Component: 150  -  total flux cleaned = 1.11652e-05 Jy
! Component: 200  -  total flux cleaned = -1.74729e-05 Jy
! Total flux subtracted in 200 components = -1.74729e-05 Jy
! Clean residual min=-0.002041 max=0.002311 Jy/beam
! Clean residual mean=0.000007 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.252683 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 0.252683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054885Jy  sigma=1.329838
! Fit after  self-cal, rms=0.054880Jy  sigma=1.329760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128113 Jy
! Component: 100  -  total flux cleaned = 0.0014299 Jy
! Component: 150  -  total flux cleaned = 0.00151496 Jy
! Component: 200  -  total flux cleaned = 0.00147862 Jy
! Total flux subtracted in 200 components = 0.00147862 Jy
! Clean residual min=-0.001832 max=0.001795 Jy/beam
! Clean residual mean=0.000005 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.254162 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.254162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054775Jy  sigma=1.327226
! Fit after  self-cal, rms=0.054768Jy  sigma=1.327060
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054768Jy  sigma=1.327060
! Fit after  self-cal, rms=0.054706Jy  sigma=1.326895
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.222 mas, bmaj=1.282 mas, bpa=5.03 degrees
! Estimated noise=0.299405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000768659 Jy
! Component: 100  -  total flux cleaned = 0.000972244 Jy
! Component: 150  -  total flux cleaned = 0.00112668 Jy
! Component: 200  -  total flux cleaned = 0.00124094 Jy
! Total flux subtracted in 200 components = 0.00124094 Jy
! Clean residual min=-0.001685 max=0.001731 Jy/beam
! Clean residual mean=0.000006 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.255403 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 88 components and 0.255403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054667Jy  sigma=1.325900
! Fit after  self-cal, rms=0.054664Jy  sigma=1.325858
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001422 Jy
! Component: 100  -  total flux cleaned = 0.000246661 Jy
! Component: 150  -  total flux cleaned = 0.000294571 Jy
! Component: 200  -  total flux cleaned = 0.000316974 Jy
! Total flux subtracted in 200 components = 0.000316974 Jy
! Clean residual min=-0.001643 max=0.001647 Jy/beam
! Clean residual mean=0.000005 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.25572 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 91 components and 0.25572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054643Jy  sigma=1.325320
! Fit after  self-cal, rms=0.054641Jy  sigma=1.325295
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054641Jy  sigma=1.325295
! Fit after  self-cal, rms=0.054610Jy  sigma=1.325232
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=2.501 mas, bpa=73.64 degrees
! Estimated noise=0.369826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125969 Jy
! Component: 100  -  total flux cleaned = 0.00035207 Jy
! Component: 150  -  total flux cleaned = 0.00053982 Jy
! Component: 200  -  total flux cleaned = 0.000699282 Jy
! Total flux subtracted in 200 components = 0.000699282 Jy
! Clean residual min=-0.001839 max=0.002008 Jy/beam
! Clean residual mean=0.000011 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.256419 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 113 components and 0.256419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054606Jy  sigma=1.325038
! Fit after  self-cal, rms=0.054602Jy  sigma=1.324972
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17.6, -37).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109322 Jy
! Component: 100  -  total flux cleaned = 0.00107875 Jy
! Component: 150  -  total flux cleaned = 0.00123893 Jy
! Component: 200  -  total flux cleaned = 0.00140571 Jy
! Total flux subtracted in 200 components = 0.00140571 Jy
! Clean residual min=-0.001404 max=0.001305 Jy/beam
! Clean residual mean=0.000010 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.257825 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 141 components and 0.257825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054551Jy  sigma=1.323743
! Fit after  self-cal, rms=0.054546Jy  sigma=1.323696
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.221 mas, bmaj=1.28 mas, bpa=2.853 degrees
! Estimated noise=0.299138 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.221 x 1.28 at 2.853 degrees (North through East)
! Clean map  min=-0.0012643  max=0.1443 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.925 mas, bmaj=1.047 mas, bpa=27.38 degrees
! Estimated noise=0.563827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118695 Jy
! Component: 100  -  total flux cleaned = 0.165692 Jy
! Component: 150  -  total flux cleaned = 0.191952 Jy
! Component: 200  -  total flux cleaned = 0.208761 Jy
! Total flux subtracted in 200 components = 0.208761 Jy
! Clean residual min=-0.005756 max=0.010106 Jy/beam
! Clean residual mean=0.000021 rms=0.001576 Jy/beam
! Combined flux in latest and established models = 0.208761 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.208761 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.221 mas, bmaj=1.28 mas, bpa=2.853 degrees
! Estimated noise=0.299138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162023 Jy
! Component: 100  -  total flux cleaned = 0.0256474 Jy
! Component: 150  -  total flux cleaned = 0.031632 Jy
! Component: 200  -  total flux cleaned = 0.0357266 Jy
! Total flux subtracted in 200 components = 0.0357266 Jy
! Clean residual min=-0.002428 max=0.003141 Jy/beam
! Clean residual mean=0.000019 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.244488 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 48 components and 0.244488 Jy
! Inverting map 
! Added new window around map position (-0.6, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00340455 Jy
! Component: 100  -  total flux cleaned = 0.00556278 Jy
! Component: 150  -  total flux cleaned = 0.00657357 Jy
! Component: 200  -  total flux cleaned = 0.00758819 Jy
! Total flux subtracted in 200 components = 0.00758819 Jy
! Clean residual min=-0.002043 max=0.002074 Jy/beam
! Clean residual mean=0.000011 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.252076 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 70 components and 0.252076 Jy
! Inverting map 
! Added new window around map position (46.2, -13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171978 Jy
! Component: 100  -  total flux cleaned = 0.00219767 Jy
! Component: 150  -  total flux cleaned = 0.00252719 Jy
! Component: 200  -  total flux cleaned = 0.00278541 Jy
! Total flux subtracted in 200 components = 0.00278541 Jy
! Clean residual min=-0.001744 max=0.001633 Jy/beam
! Clean residual mean=0.000008 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.254862 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 91 components and 0.254862 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=2.501 mas, bpa=73.64 degrees
! Estimated noise=0.369826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109982 Jy
! Component: 100  -  total flux cleaned = 0.00127409 Jy
! Component: 150  -  total flux cleaned = 0.00134343 Jy
! Component: 200  -  total flux cleaned = 0.00140656 Jy
! Total flux subtracted in 200 components = 0.00140656 Jy
! Clean residual min=-0.001408 max=0.001378 Jy/beam
! Clean residual mean=0.000015 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.256268 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.27623e-05 Jy
! Component: 100  -  total flux cleaned = 0.000237009 Jy
! Component: 150  -  total flux cleaned = 0.000309864 Jy
! Component: 200  -  total flux cleaned = 0.000287378 Jy
! Total flux subtracted in 200 components = 0.000287378 Jy
! Clean residual min=-0.001240 max=0.001260 Jy/beam
! Clean residual mean=0.000014 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.256556 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 160 components and 0.256555 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.221 mas, bmaj=1.28 mas, bpa=2.853 degrees
! Estimated noise=0.299138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020535 Jy
! Component: 100  -  total flux cleaned = -0.000164177 Jy
! Component: 150  -  total flux cleaned = -9.16537e-05 Jy
! Component: 200  -  total flux cleaned = -9.15475e-05 Jy
! Total flux subtracted in 200 components = -9.15475e-05 Jy
! Clean residual min=-0.001366 max=0.001327 Jy/beam
! Clean residual mean=0.000006 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.256464 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 172 components and 0.256464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054513Jy  sigma=1.322743
! Fit after  self-cal, rms=0.054496Jy  sigma=1.322422
wmodel /scr/pima/bg219i_uvs/J1639+5357_X_map.mod
! Writing 172 model components to file: /scr/pima/bg219i_uvs/J1639+5357_X_map.mod
wobs /scr/pima/bg219i_uvs/J1639+5357_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J1639+5357_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J1639+5357_X_map.win
! wwins: Wrote 7 windows to /scr/pima/bg219i_uvs/J1639+5357_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105206 Jy
! Component: 100  -  total flux cleaned = -1.213e-05 Jy
! Component: 150  -  total flux cleaned = -0.00014699 Jy
! Component: 200  -  total flux cleaned = -0.000255284 Jy
! Component: 250  -  total flux cleaned = -0.000381399 Jy
! Component: 300  -  total flux cleaned = -0.000564189 Jy
! Component: 350  -  total flux cleaned = -0.000643089 Jy
! Component: 400  -  total flux cleaned = -0.000777678 Jy
! Component: 450  -  total flux cleaned = -0.000852452 Jy
! Component: 500  -  total flux cleaned = -0.000962009 Jy
! Component: 550  -  total flux cleaned = -0.000962056 Jy
! Component: 600  -  total flux cleaned = -0.00101478 Jy
! Component: 650  -  total flux cleaned = -0.00103206 Jy
! Component: 700  -  total flux cleaned = -0.00106562 Jy
! Component: 750  -  total flux cleaned = -0.00103321 Jy
! Component: 800  -  total flux cleaned = -0.00103323 Jy
! Component: 850  -  total flux cleaned = -0.00100153 Jy
! Component: 900  -  total flux cleaned = -0.0010322 Jy
! Component: 950  -  total flux cleaned = -0.00098598 Jy
! Component: 1000  -  total flux cleaned = -0.000941041 Jy
! Component: 1050  -  total flux cleaned = -0.000970685 Jy
! Component: 1100  -  total flux cleaned = -0.000926799 Jy
! Component: 1150  -  total flux cleaned = -0.000883743 Jy
! Component: 1200  -  total flux cleaned = -0.000883909 Jy
! Component: 1250  -  total flux cleaned = -0.000870457 Jy
! Component: 1300  -  total flux cleaned = -0.000842978 Jy
! Component: 1350  -  total flux cleaned = -0.000788983 Jy
! Component: 1400  -  total flux cleaned = -0.000722049 Jy
! Component: 1450  -  total flux cleaned = -0.00066939 Jy
! Component: 1500  -  total flux cleaned = -0.000617425 Jy
! Component: 1550  -  total flux cleaned = -0.000527431 Jy
! Component: 1600  -  total flux cleaned = -0.000489568 Jy
! Component: 1650  -  total flux cleaned = -0.00046453 Jy
! Component: 1700  -  total flux cleaned = -0.000402462 Jy
! Component: 1750  -  total flux cleaned = -0.000402379 Jy
! Component: 1800  -  total flux cleaned = -0.000414602 Jy
! Component: 1850  -  total flux cleaned = -0.000402512 Jy
! Component: 1900  -  total flux cleaned = -0.000414246 Jy
! Component: 1950  -  total flux cleaned = -0.000425917 Jy
! Component: 2000  -  total flux cleaned = -0.000402687 Jy
! Component: 2050  -  total flux cleaned = -0.000391249 Jy
! Component: 2100  -  total flux cleaned = -0.000391207 Jy
! Component: 2150  -  total flux cleaned = -0.000413835 Jy
! Component: 2200  -  total flux cleaned = -0.000424999 Jy
! Component: 2250  -  total flux cleaned = -0.000413939 Jy
! Component: 2300  -  total flux cleaned = -0.000457655 Jy
! Component: 2350  -  total flux cleaned = -0.000435952 Jy
! Component: 2400  -  total flux cleaned = -0.000446672 Jy
! Component: 2450  -  total flux cleaned = -0.000467971 Jy
! Component: 2500  -  total flux cleaned = -0.000436173 Jy
! Component: 2550  -  total flux cleaned = -0.000394189 Jy
! Component: 2600  -  total flux cleaned = -0.000342234 Jy
! Component: 2650  -  total flux cleaned = -0.00038355 Jy
! Component: 2700  -  total flux cleaned = -0.000373276 Jy
! Component: 2750  -  total flux cleaned = -0.000332516 Jy
! Component: 2800  -  total flux cleaned = -0.000342597 Jy
! Component: 2850  -  total flux cleaned = -0.000342552 Jy
! Component: 2900  -  total flux cleaned = -0.000362482 Jy
! Component: 2950  -  total flux cleaned = -0.000342651 Jy
! Component: 3000  -  total flux cleaned = -0.000332885 Jy
! Component: 3050  -  total flux cleaned = -0.000332904 Jy
! Component: 3100  -  total flux cleaned = -0.000342771 Jy
! Component: 3150  -  total flux cleaned = -0.00031381 Jy
! Component: 3200  -  total flux cleaned = -0.000332961 Jy
! Component: 3250  -  total flux cleaned = -0.000342384 Jy
! Component: 3300  -  total flux cleaned = -0.000323468 Jy
! Component: 3350  -  total flux cleaned = -0.000304647 Jy
! Component: 3400  -  total flux cleaned = -0.000285992 Jy
! Component: 3450  -  total flux cleaned = -0.000286041 Jy
! Component: 3500  -  total flux cleaned = -0.000295262 Jy
! Component: 3550  -  total flux cleaned = -0.000258575 Jy
! Component: 3600  -  total flux cleaned = -0.000286055 Jy
! Component: 3650  -  total flux cleaned = -0.000276969 Jy
! Component: 3700  -  total flux cleaned = -0.00027695 Jy
! Component: 3750  -  total flux cleaned = -0.000259018 Jy
! Component: 3800  -  total flux cleaned = -0.000267852 Jy
! Component: 3850  -  total flux cleaned = -0.000232346 Jy
! Component: 3900  -  total flux cleaned = -0.000214748 Jy
! Component: 3950  -  total flux cleaned = -0.000223605 Jy
! Component: 4000  -  total flux cleaned = -0.000180102 Jy
! Component: 4050  -  total flux cleaned = -0.000197563 Jy
! Total flux subtracted in 4096 components = -0.000223475 Jy
! Clean residual min=-0.000519 max=0.000662 Jy/beam
! Clean residual mean=0.000003 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.25624 Jy
keep
! Adding 266 model components to the UV plane model.
! The established model now contains 438 components and 0.25624 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J1639+5357_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.221 x 1.28 at 2.853 degrees (North through East)
! Clean map  min=-0.0012351  max=0.14342 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1639+5357_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.143424 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00013622 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.284929 0.284929 0.569859 1.13972 2.27944 4.55887 9.11774 18.2355 36.471 72.9419
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.143 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1052.89 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1639+5357_X_uvs.log closed on Wed Apr  6 23:50:11 2016