! Started logfile: /scr/pima/bg219i_uvs/J1632+1615_S_uvs.log on Wed Apr 6 23:08:30 2016 obs /scr/pima/bg219i_uvs/J1632+1615_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J1632+1615_S_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J1632+1615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 10044 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1632+1615_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008850Jy sigma=26.667534 ! Fit after self-cal, rms=0.889710Jy sigma=23.522675 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.569 mas, bmaj=6.4 mas, bpa=-3.199 degrees ! Estimated noise=0.445013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829104 Jy ! Component: 100 - total flux cleaned = 0.102476 Jy ! Total flux subtracted in 100 components = 0.102476 Jy ! Clean residual min=-0.003939 max=0.007820 Jy/beam ! Clean residual mean=0.000010 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.102476 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.102476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054601Jy sigma=1.393737 ! Fit after self-cal, rms=0.054581Jy sigma=1.393540 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00848161 Jy ! Component: 100 - total flux cleaned = 0.0128399 Jy ! Total flux subtracted in 100 components = 0.0128399 Jy ! Clean residual min=-0.002823 max=0.002951 Jy/beam ! Clean residual mean=0.000003 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.115316 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.115316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052854Jy sigma=1.344871 ! Fit after self-cal, rms=0.052833Jy sigma=1.344657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=7.232 mas, bpa=-3.41 degrees ! Estimated noise=0.285131 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399793 Jy ! Component: 100 - total flux cleaned = 0.00608966 Jy ! Component: 150 - total flux cleaned = 0.00734994 Jy ! Component: 200 - total flux cleaned = 0.0081285 Jy ! Total flux subtracted in 200 components = 0.0081285 Jy ! Clean residual min=-0.001767 max=0.001713 Jy/beam ! Clean residual mean=-0.000000 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.123445 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 33 components and 0.123445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052548Jy sigma=1.336269 ! Fit after self-cal, rms=0.052543Jy sigma=1.336209 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.291 x 7.232 at -3.41 degrees (North through East) ! Clean map min=-0.0017165 max=0.11036 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.08 KP 0.97 ! LA 0.99 MK 1.01 NL 1.01 OV 0.99 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.04 KP 0.98 ! LA 0.98 MK 1.01 NL 1.01 OV 0.97 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.02 KP 0.98 ! LA 0.99 MK 1.03 NL 0.99 OV 1.01 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.03 KP 0.99 ! LA 1.01 MK 0.97 NL 0.97 OV 1.01 ! PT 1.02 SC 1.02 ! ! ! Fit before self-cal, rms=0.052543Jy sigma=1.336209 ! Fit after self-cal, rms=0.052653Jy sigma=1.333573 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.245 mas, bpa=-3.32 degrees ! Estimated noise=0.28475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257397 Jy ! Component: 100 - total flux cleaned = -0.000284419 Jy ! Component: 150 - total flux cleaned = -0.000295966 Jy ! Component: 200 - total flux cleaned = -0.000305763 Jy ! Total flux subtracted in 200 components = -0.000305763 Jy ! Clean residual min=-0.001732 max=0.001470 Jy/beam ! Clean residual mean=-0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.123139 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.123139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052647Jy sigma=1.333410 ! Fit after self-cal, rms=0.052655Jy sigma=1.333376 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052655Jy sigma=1.333376 ! Fit after self-cal, rms=0.052631Jy sigma=1.330790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=7.231 mas, bpa=-3.407 degrees ! Estimated noise=0.284653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.04342e-05 Jy ! Component: 100 - total flux cleaned = 3.81205e-05 Jy ! Component: 150 - total flux cleaned = 3.34499e-05 Jy ! Component: 200 - total flux cleaned = 2.38243e-05 Jy ! Total flux subtracted in 200 components = 2.38243e-05 Jy ! Clean residual min=-0.001604 max=0.001401 Jy/beam ! Clean residual mean=-0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.123163 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.123163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052630Jy sigma=1.330751 ! Fit after self-cal, rms=0.052634Jy sigma=1.330723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.62034e-06 Jy ! Component: 100 - total flux cleaned = -1.01643e-05 Jy ! Component: 150 - total flux cleaned = -1.88475e-05 Jy ! Component: 200 - total flux cleaned = -2.74235e-05 Jy ! Total flux subtracted in 200 components = -2.74235e-05 Jy ! Clean residual min=-0.001608 max=0.001409 Jy/beam ! Clean residual mean=-0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.123135 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.123135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052633Jy sigma=1.330704 ! Fit after self-cal, rms=0.052633Jy sigma=1.330705 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052633Jy sigma=1.330705 ! Fit after self-cal, rms=0.052649Jy sigma=1.330695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.304 mas, bmaj=7.228 mas, bpa=-3.359 degrees ! Estimated noise=0.284744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.29898e-05 Jy ! Component: 100 - total flux cleaned = 2.81504e-05 Jy ! Component: 150 - total flux cleaned = 1.92786e-05 Jy ! Component: 200 - total flux cleaned = 1.51926e-05 Jy ! Total flux subtracted in 200 components = 1.51926e-05 Jy ! Clean residual min=-0.001606 max=0.001404 Jy/beam ! Clean residual mean=-0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.123151 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.123151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052648Jy sigma=1.330670 ! Fit after self-cal, rms=0.052648Jy sigma=1.330672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0881e-06 Jy ! Component: 100 - total flux cleaned = -6.92469e-06 Jy ! Component: 150 - total flux cleaned = -1.45991e-05 Jy ! Component: 200 - total flux cleaned = -2.20815e-05 Jy ! Total flux subtracted in 200 components = -2.20815e-05 Jy ! Clean residual min=-0.001606 max=0.001408 Jy/beam ! Clean residual mean=-0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.123128 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.123128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052648Jy sigma=1.330655 ! Fit after self-cal, rms=0.052648Jy sigma=1.330656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052648Jy sigma=1.330656 ! Fit after self-cal, rms=0.052654Jy sigma=1.330650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.645 mas, bmaj=10.67 mas, bpa=-2.834 degrees ! Estimated noise=0.357829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.87138e-05 Jy ! Component: 100 - total flux cleaned = -0.000105384 Jy ! Component: 150 - total flux cleaned = -0.000126312 Jy ! Component: 200 - total flux cleaned = -0.00015152 Jy ! Total flux subtracted in 200 components = -0.00015152 Jy ! Clean residual min=-0.001528 max=0.001601 Jy/beam ! Clean residual mean=-0.000003 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.122977 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.122977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052655Jy sigma=1.330656 ! Fit after self-cal, rms=0.052653Jy sigma=1.330639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.63828e-05 Jy ! Component: 100 - total flux cleaned = -7.92021e-05 Jy ! Component: 150 - total flux cleaned = -9.01857e-05 Jy ! Component: 200 - total flux cleaned = -9.51713e-05 Jy ! Total flux subtracted in 200 components = -9.51713e-05 Jy ! Clean residual min=-0.001520 max=0.001592 Jy/beam ! Clean residual mean=-0.000003 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.122882 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.122882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052655Jy sigma=1.330658 ! Fit after self-cal, rms=0.052654Jy sigma=1.330646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=7.225 mas, bpa=-3.308 degrees ! Estimated noise=0.284803 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.305 x 7.225 at -3.308 degrees (North through East) ! Clean map min=-0.0015485 max=0.11029 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=6.395 mas, bpa=-3.212 degrees ! Estimated noise=0.447532 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0832978 Jy ! Component: 100 - total flux cleaned = 0.102889 Jy ! Component: 150 - total flux cleaned = 0.111289 Jy ! Component: 200 - total flux cleaned = 0.11553 Jy ! Total flux subtracted in 200 components = 0.11553 Jy ! Clean residual min=-0.003006 max=0.003250 Jy/beam ! Clean residual mean=0.000003 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.11553 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.11553 Jy ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=7.225 mas, bpa=-3.308 degrees ! Estimated noise=0.284803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334538 Jy ! Component: 100 - total flux cleaned = 0.00504551 Jy ! Component: 150 - total flux cleaned = 0.00603765 Jy ! Component: 200 - total flux cleaned = 0.00663476 Jy ! Total flux subtracted in 200 components = 0.00663476 Jy ! Clean residual min=-0.001685 max=0.001393 Jy/beam ! Clean residual mean=-0.000001 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.122165 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 38 components and 0.122165 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.645 mas, bmaj=10.67 mas, bpa=-2.834 degrees ! Estimated noise=0.357829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493503 Jy ! Component: 100 - total flux cleaned = 0.000502045 Jy ! Component: 150 - total flux cleaned = 0.000515549 Jy ! Component: 200 - total flux cleaned = 0.000532907 Jy ! Total flux subtracted in 200 components = 0.000532907 Jy ! Clean residual min=-0.001502 max=0.001573 Jy/beam ! Clean residual mean=-0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.122698 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.93975e-06 Jy ! Component: 100 - total flux cleaned = 1.40423e-05 Jy ! Component: 150 - total flux cleaned = 1.83725e-05 Jy ! Component: 200 - total flux cleaned = 2.22353e-05 Jy ! Total flux subtracted in 200 components = 2.22353e-05 Jy ! Clean residual min=-0.001505 max=0.001575 Jy/beam ! Clean residual mean=-0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.12272 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.12272 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=7.225 mas, bpa=-3.308 degrees ! Estimated noise=0.284803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111533 Jy ! Component: 100 - total flux cleaned = -7.18213e-05 Jy ! Component: 150 - total flux cleaned = -5.37888e-05 Jy ! Component: 200 - total flux cleaned = -2.11714e-05 Jy ! Total flux subtracted in 200 components = -2.11714e-05 Jy ! Clean residual min=-0.001642 max=0.001386 Jy/beam ! Clean residual mean=-0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.122699 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.122699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052656Jy sigma=1.330677 ! Fit after self-cal, rms=0.052655Jy sigma=1.330671 wmodel /scr/pima/bg219i_uvs/J1632+1615_S_map.mod ! Writing 53 model components to file: /scr/pima/bg219i_uvs/J1632+1615_S_map.mod wobs /scr/pima/bg219i_uvs/J1632+1615_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219i_uvs/J1632+1615_S_uvs.fits wwins /scr/pima/bg219i_uvs/J1632+1615_S_map.win ! wwins: Wrote 1 windows to /scr/pima/bg219i_uvs/J1632+1615_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243403 Jy ! Component: 100 - total flux cleaned = -0.000243033 Jy ! Component: 150 - total flux cleaned = -0.000199235 Jy ! Component: 200 - total flux cleaned = -0.000114493 Jy ! Component: 250 - total flux cleaned = 8.42715e-06 Jy ! Component: 300 - total flux cleaned = 0.000127987 Jy ! Component: 350 - total flux cleaned = 0.000322053 Jy ! Component: 400 - total flux cleaned = 0.00045408 Jy ! Component: 450 - total flux cleaned = 0.000601594 Jy ! Component: 500 - total flux cleaned = 0.000709948 Jy ! Component: 550 - total flux cleaned = 0.000833664 Jy ! Component: 600 - total flux cleaned = 0.000920754 Jy ! Component: 650 - total flux cleaned = 0.000971947 Jy ! Component: 700 - total flux cleaned = 0.00102244 Jy ! Component: 750 - total flux cleaned = 0.00103922 Jy ! Component: 800 - total flux cleaned = 0.00108797 Jy ! Component: 850 - total flux cleaned = 0.00113575 Jy ! Component: 900 - total flux cleaned = 0.00115129 Jy ! Component: 950 - total flux cleaned = 0.001198 Jy ! Component: 1000 - total flux cleaned = 0.00125888 Jy ! Component: 1050 - total flux cleaned = 0.00130362 Jy ! Component: 1100 - total flux cleaned = 0.00127388 Jy ! Component: 1150 - total flux cleaned = 0.00134792 Jy ! Component: 1200 - total flux cleaned = 0.00142072 Jy ! Component: 1250 - total flux cleaned = 0.00142056 Jy ! Component: 1300 - total flux cleaned = 0.00151997 Jy ! Component: 1350 - total flux cleaned = 0.0015343 Jy ! Component: 1400 - total flux cleaned = 0.00154817 Jy ! Component: 1450 - total flux cleaned = 0.00161686 Jy ! Component: 1500 - total flux cleaned = 0.00165716 Jy ! Component: 1550 - total flux cleaned = 0.00165694 Jy ! Component: 1600 - total flux cleaned = 0.00169669 Jy ! Component: 1650 - total flux cleaned = 0.00169659 Jy ! Component: 1700 - total flux cleaned = 0.00170971 Jy ! Component: 1750 - total flux cleaned = 0.0017483 Jy ! Component: 1800 - total flux cleaned = 0.0017737 Jy ! Component: 1850 - total flux cleaned = 0.00177365 Jy ! Component: 1900 - total flux cleaned = 0.00177381 Jy ! Component: 1950 - total flux cleaned = 0.00184778 Jy ! Component: 2000 - total flux cleaned = 0.00187214 Jy ! Component: 2050 - total flux cleaned = 0.00189626 Jy ! Component: 2100 - total flux cleaned = 0.00189619 Jy ! Component: 2150 - total flux cleaned = 0.00194373 Jy ! Component: 2200 - total flux cleaned = 0.00193174 Jy ! Component: 2250 - total flux cleaned = 0.00199002 Jy ! Component: 2300 - total flux cleaned = 0.00193218 Jy ! Component: 2350 - total flux cleaned = 0.00194362 Jy ! Component: 2400 - total flux cleaned = 0.00194364 Jy ! Component: 2450 - total flux cleaned = 0.00197739 Jy ! Component: 2500 - total flux cleaned = 0.00197731 Jy ! Component: 2550 - total flux cleaned = 0.00196607 Jy ! Component: 2600 - total flux cleaned = 0.00198822 Jy ! Component: 2650 - total flux cleaned = 0.00194456 Jy ! Component: 2700 - total flux cleaned = 0.00195558 Jy ! Component: 2750 - total flux cleaned = 0.00198787 Jy ! Component: 2800 - total flux cleaned = 0.00204115 Jy ! Component: 2850 - total flux cleaned = 0.00201993 Jy ! Component: 2900 - total flux cleaned = 0.00203046 Jy ! Component: 2950 - total flux cleaned = 0.00210323 Jy ! Component: 3000 - total flux cleaned = 0.00209288 Jy ! Component: 3050 - total flux cleaned = 0.00212364 Jy ! Component: 3100 - total flux cleaned = 0.00208289 Jy ! Component: 3150 - total flux cleaned = 0.00213365 Jy ! Component: 3200 - total flux cleaned = 0.00216369 Jy ! Component: 3250 - total flux cleaned = 0.0021936 Jy ! Component: 3300 - total flux cleaned = 0.00220343 Jy ! Component: 3350 - total flux cleaned = 0.00228208 Jy ! Component: 3400 - total flux cleaned = 0.00228211 Jy ! Component: 3450 - total flux cleaned = 0.00229177 Jy ! Component: 3500 - total flux cleaned = 0.00233032 Jy ! Component: 3550 - total flux cleaned = 0.00233037 Jy ! Component: 3600 - total flux cleaned = 0.00239697 Jy ! Component: 3650 - total flux cleaned = 0.00241579 Jy ! Component: 3700 - total flux cleaned = 0.00239701 Jy ! Component: 3750 - total flux cleaned = 0.00246228 Jy ! Component: 3800 - total flux cleaned = 0.00244384 Jy ! Component: 3850 - total flux cleaned = 0.00250837 Jy ! Component: 3900 - total flux cleaned = 0.00252657 Jy ! Component: 3950 - total flux cleaned = 0.00251749 Jy ! Component: 4000 - total flux cleaned = 0.00258971 Jy ! Component: 4050 - total flux cleaned = 0.00258087 Jy ! Total flux subtracted in 4096 components = 0.00261649 Jy ! Clean residual min=-0.000525 max=0.000610 Jy/beam ! Clean residual mean=-0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.125316 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 355 components and 0.125315 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219i_uvs/J1632+1615_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.305 x 7.225 at -3.308 degrees (North through East) ! Clean map min=-0.0011187 max=0.11041 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1632+1615_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110411 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000166853 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.453358 0.453358 0.906716 1.81343 3.62686 7.25373 14.5075 29.0149 58.0298 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.11 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 661.729 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J1632+1615_S_uvs.log closed on Wed Apr 6 23:08:35 2016