! Started logfile: /scr/pima/bg219i_uvs/J1632+1615_S_dfm.log on Thu May 19 23:28:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1632+1615_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1632+1615_S_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J1632+1615
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 10044 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1632+1615_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008850Jy  sigma=26.667534
! Fit after  self-cal, rms=0.889710Jy  sigma=23.522675
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.569 mas, bmaj=6.4 mas, bpa=-3.199 degrees
! Estimated noise=0.445013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0829104 Jy
! Component: 100  -  total flux cleaned = 0.102476 Jy
! Total flux subtracted in 100 components = 0.102476 Jy
! Clean residual min=-0.003939 max=0.007820 Jy/beam
! Clean residual mean=0.000010 rms=0.000992 Jy/beam
! Combined flux in latest and established models = 0.102476 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.102476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054601Jy  sigma=1.393737
! Fit after  self-cal, rms=0.054581Jy  sigma=1.393540
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00848161 Jy
! Component: 100  -  total flux cleaned = 0.0128399 Jy
! Total flux subtracted in 100 components = 0.0128399 Jy
! Clean residual min=-0.002823 max=0.002951 Jy/beam
! Clean residual mean=0.000003 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.115316 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.115316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052854Jy  sigma=1.344871
! Fit after  self-cal, rms=0.052833Jy  sigma=1.344657
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.291 mas, bmaj=7.232 mas, bpa=-3.41 degrees
! Estimated noise=0.285131 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00399793 Jy
! Component: 100  -  total flux cleaned = 0.00608966 Jy
! Component: 150  -  total flux cleaned = 0.00734994 Jy
! Component: 200  -  total flux cleaned = 0.0081285 Jy
! Total flux subtracted in 200 components = 0.0081285 Jy
! Clean residual min=-0.001767 max=0.001713 Jy/beam
! Clean residual mean=-0.000000 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.123445 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 33 components and 0.123445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052548Jy  sigma=1.336269
! Fit after  self-cal, rms=0.052543Jy  sigma=1.336209
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.291 x 7.232 at -3.41 degrees (North through East)
! Clean map  min=-0.0017165  max=0.11036 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.08     KP        0.97     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.04     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.99     MK        1.03     NL        0.99     OV        1.01     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.03     KP        0.99     
!   LA        1.01     MK        0.97     NL        0.97     OV        1.01     
!   PT        1.02     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.052543Jy  sigma=1.336209
! Fit after  self-cal, rms=0.052653Jy  sigma=1.333573
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=7.245 mas, bpa=-3.32 degrees
! Estimated noise=0.28475 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000257397 Jy
! Component: 100  -  total flux cleaned = -0.000284419 Jy
! Component: 150  -  total flux cleaned = -0.000295966 Jy
! Component: 200  -  total flux cleaned = -0.000305763 Jy
! Total flux subtracted in 200 components = -0.000305763 Jy
! Clean residual min=-0.001732 max=0.001470 Jy/beam
! Clean residual mean=-0.000002 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.123139 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 39 components and 0.123139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052647Jy  sigma=1.333410
! Fit after  self-cal, rms=0.052655Jy  sigma=1.333376
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052655Jy  sigma=1.333376
! Fit after  self-cal, rms=0.052631Jy  sigma=1.330790
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.303 mas, bmaj=7.231 mas, bpa=-3.407 degrees
! Estimated noise=0.284653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.04342e-05 Jy
! Component: 100  -  total flux cleaned = 3.81205e-05 Jy
! Component: 150  -  total flux cleaned = 3.34499e-05 Jy
! Component: 200  -  total flux cleaned = 2.38243e-05 Jy
! Total flux subtracted in 200 components = 2.38243e-05 Jy
! Clean residual min=-0.001604 max=0.001401 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.123163 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 46 components and 0.123163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052630Jy  sigma=1.330751
! Fit after  self-cal, rms=0.052634Jy  sigma=1.330723
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.62034e-06 Jy
! Component: 100  -  total flux cleaned = -1.01643e-05 Jy
! Component: 150  -  total flux cleaned = -1.88475e-05 Jy
! Component: 200  -  total flux cleaned = -2.74235e-05 Jy
! Total flux subtracted in 200 components = -2.74235e-05 Jy
! Clean residual min=-0.001608 max=0.001409 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.123135 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 48 components and 0.123135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052633Jy  sigma=1.330704
! Fit after  self-cal, rms=0.052633Jy  sigma=1.330705
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052633Jy  sigma=1.330705
! Fit after  self-cal, rms=0.052649Jy  sigma=1.330695
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.304 mas, bmaj=7.228 mas, bpa=-3.359 degrees
! Estimated noise=0.284744 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.29898e-05 Jy
! Component: 100  -  total flux cleaned = 2.81504e-05 Jy
! Component: 150  -  total flux cleaned = 1.92786e-05 Jy
! Component: 200  -  total flux cleaned = 1.51926e-05 Jy
! Total flux subtracted in 200 components = 1.51926e-05 Jy
! Clean residual min=-0.001606 max=0.001404 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.123151 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 0.123151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052648Jy  sigma=1.330670
! Fit after  self-cal, rms=0.052648Jy  sigma=1.330672
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.0881e-06 Jy
! Component: 100  -  total flux cleaned = -6.92469e-06 Jy
! Component: 150  -  total flux cleaned = -1.45991e-05 Jy
! Component: 200  -  total flux cleaned = -2.20815e-05 Jy
! Total flux subtracted in 200 components = -2.20815e-05 Jy
! Clean residual min=-0.001606 max=0.001408 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.123128 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 49 components and 0.123128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052648Jy  sigma=1.330655
! Fit after  self-cal, rms=0.052648Jy  sigma=1.330656
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052648Jy  sigma=1.330656
! Fit after  self-cal, rms=0.052654Jy  sigma=1.330650
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.645 mas, bmaj=10.67 mas, bpa=-2.834 degrees
! Estimated noise=0.357829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.87138e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105384 Jy
! Component: 150  -  total flux cleaned = -0.000126312 Jy
! Component: 200  -  total flux cleaned = -0.00015152 Jy
! Total flux subtracted in 200 components = -0.00015152 Jy
! Clean residual min=-0.001528 max=0.001601 Jy/beam
! Clean residual mean=-0.000003 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.122977 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.122977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052655Jy  sigma=1.330656
! Fit after  self-cal, rms=0.052653Jy  sigma=1.330639
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.63828e-05 Jy
! Component: 100  -  total flux cleaned = -7.92021e-05 Jy
! Component: 150  -  total flux cleaned = -9.01857e-05 Jy
! Component: 200  -  total flux cleaned = -9.51713e-05 Jy
! Total flux subtracted in 200 components = -9.51713e-05 Jy
! Clean residual min=-0.001520 max=0.001592 Jy/beam
! Clean residual mean=-0.000003 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.122882 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 51 components and 0.122882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052655Jy  sigma=1.330658
! Fit after  self-cal, rms=0.052654Jy  sigma=1.330646
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=7.225 mas, bpa=-3.308 degrees
! Estimated noise=0.284803 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.305 x 7.225 at -3.308 degrees (North through East)
! Clean map  min=-0.0015485  max=0.11029 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.578 mas, bmaj=6.395 mas, bpa=-3.212 degrees
! Estimated noise=0.447532 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0832978 Jy
! Component: 100  -  total flux cleaned = 0.102889 Jy
! Component: 150  -  total flux cleaned = 0.111289 Jy
! Component: 200  -  total flux cleaned = 0.11553 Jy
! Total flux subtracted in 200 components = 0.11553 Jy
! Clean residual min=-0.003006 max=0.003250 Jy/beam
! Clean residual mean=0.000003 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.11553 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.11553 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=7.225 mas, bpa=-3.308 degrees
! Estimated noise=0.284803 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334538 Jy
! Component: 100  -  total flux cleaned = 0.00504551 Jy
! Component: 150  -  total flux cleaned = 0.00603765 Jy
! Component: 200  -  total flux cleaned = 0.00663476 Jy
! Total flux subtracted in 200 components = 0.00663476 Jy
! Clean residual min=-0.001685 max=0.001393 Jy/beam
! Clean residual mean=-0.000001 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.122165 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 38 components and 0.122165 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.645 mas, bmaj=10.67 mas, bpa=-2.834 degrees
! Estimated noise=0.357829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000493503 Jy
! Component: 100  -  total flux cleaned = 0.000502045 Jy
! Component: 150  -  total flux cleaned = 0.000515549 Jy
! Component: 200  -  total flux cleaned = 0.000532907 Jy
! Total flux subtracted in 200 components = 0.000532907 Jy
! Clean residual min=-0.001502 max=0.001573 Jy/beam
! Clean residual mean=-0.000003 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.122698 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.93975e-06 Jy
! Component: 100  -  total flux cleaned = 1.40423e-05 Jy
! Component: 150  -  total flux cleaned = 1.83725e-05 Jy
! Component: 200  -  total flux cleaned = 2.22353e-05 Jy
! Total flux subtracted in 200 components = 2.22353e-05 Jy
! Clean residual min=-0.001505 max=0.001575 Jy/beam
! Clean residual mean=-0.000003 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.12272 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 49 components and 0.12272 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=7.225 mas, bpa=-3.308 degrees
! Estimated noise=0.284803 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111533 Jy
! Component: 100  -  total flux cleaned = -7.18213e-05 Jy
! Component: 150  -  total flux cleaned = -5.37888e-05 Jy
! Component: 200  -  total flux cleaned = -2.11714e-05 Jy
! Total flux subtracted in 200 components = -2.11714e-05 Jy
! Clean residual min=-0.001642 max=0.001386 Jy/beam
! Clean residual mean=-0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.122699 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 53 components and 0.122699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052656Jy  sigma=1.330677
! Fit after  self-cal, rms=0.052655Jy  sigma=1.330671
wmodel /J1632+1615_S_map.mod
! wmodel: Unable to open new model file: /J1632+1615_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1632+1615_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.305 x 7.225 at -3.308 degrees (North through East)
! Clean map  min=-0.0015886  max=0.11037 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1632+1615_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.110371 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000343214 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.932892 0.932892 1.86578 3.73157 7.46313 14.9263 29.8525 59.7051
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.11 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  321.58 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1632+1615_S_dfm.log closed on Thu May 19 23:28:28 2016