! Started logfile: /scr/pima/bg219i_uvs/J1628+4734_X_dfm.log on Thu May 19 23:28:21 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1628+4734_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1628+4734_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.65914 visibilities/baseline/integration-bin.
! Found source: J1628+4734
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22068 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1628+4734_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002577Jy  sigma=25.460426
! Fit after  self-cal, rms=0.958142Jy  sigma=24.330818
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8222 mas, bmaj=1.245 mas, bpa=-11.89 degrees
! Estimated noise=0.463575 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0297441 Jy
! Component: 100  -  total flux cleaned = 0.0381251 Jy
! Total flux subtracted in 100 components = 0.0381251 Jy
! Clean residual min=-0.003170 max=0.004909 Jy/beam
! Clean residual mean=-0.000001 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.0381251 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0381251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058760Jy  sigma=1.400283
! Fit after  self-cal, rms=0.056924Jy  sigma=1.351873
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589291 Jy
! Component: 100  -  total flux cleaned = 0.00891739 Jy
! Total flux subtracted in 100 components = 0.00891739 Jy
! Clean residual min=-0.002988 max=0.004891 Jy/beam
! Clean residual mean=-0.000001 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.0470425 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.0470425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055889Jy  sigma=1.323456
! Fit after  self-cal, rms=0.055893Jy  sigma=1.323118
! Inverting map 
! Added new window around map position (2.4, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0046646 Jy
! Component: 100  -  total flux cleaned = 0.00721236 Jy
! Total flux subtracted in 100 components = 0.00721236 Jy
! Clean residual min=-0.003025 max=0.003175 Jy/beam
! Clean residual mean=-0.000001 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.0542549 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 21 components and 0.0542549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055509Jy  sigma=1.312095
! Fit after  self-cal, rms=0.055359Jy  sigma=1.309078
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.148 mas, bmaj=1.643 mas, bpa=-18.85 degrees
! Estimated noise=0.204692 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00445827 Jy
! Component: 100  -  total flux cleaned = 0.00734819 Jy
! Component: 150  -  total flux cleaned = 0.00935963 Jy
! Component: 200  -  total flux cleaned = 0.0108258 Jy
! Total flux subtracted in 200 components = 0.0108258 Jy
! Clean residual min=-0.001801 max=0.001922 Jy/beam
! Clean residual mean=-0.000001 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.0650807 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 47 components and 0.0650807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054956Jy  sigma=1.297264
! Fit after  self-cal, rms=0.054844Jy  sigma=1.295710
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.148 x 1.643 at -18.85 degrees (North through East)
! Clean map  min=-0.0017257  max=0.043057 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.07     KP        0.96     
!   LA        0.98     MK        1.04     NL        1.04     OV        1.02     
!   PT        0.91     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.08     KP        1.01     
!   LA        0.95     MK        1.01     NL        1.04     OV        0.96     
!   PT        0.95     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        0.84     KP        1.16     
!   LA        0.96     MK        0.98     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.18     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.95     KP        1.04     
!   LA        0.92     MK        1.05     NL        1.09     OV        0.97     
!   PT        0.92     SC        1.18     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     HN        0.94     KP        1.10     
!   LA        0.93     MK        0.94     NL        1.09     OV        0.97     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.04     HN        0.87     KP        1.10     
!   LA        0.94     MK        1.08     NL        1.10     OV        1.00     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        0.90     KP        1.12     
!   LA        0.95     MK        0.95     NL        1.13     OV        0.92     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        0.93     KP        1.05     
!   LA        0.97     MK        1.02     NL        1.03     OV        1.04     
!   PT        0.95     SC        0.92     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.96     HN        0.90     KP        1.06     
!   LA        0.94     MK        0.93     NL        1.11     OV        0.92     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        0.85     KP        1.13     
!   LA        0.94     MK        0.92     NL        1.08     OV        1.00     
!   PT        1.01     SC        0.84     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        0.99     KP        1.02     
!   LA        0.95     MK        0.84     NL        1.09     OV        1.04     
!   PT        1.01     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.054844Jy  sigma=1.295710
! Fit after  self-cal, rms=0.053294Jy  sigma=1.291547
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.146 mas, bmaj=1.636 mas, bpa=-19.23 degrees
! Estimated noise=0.200181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140873 Jy
! Component: 100  -  total flux cleaned = 0.00196143 Jy
! Component: 150  -  total flux cleaned = 0.00213851 Jy
! Component: 200  -  total flux cleaned = 0.00222476 Jy
! Total flux subtracted in 200 components = 0.00222476 Jy
! Clean residual min=-0.001230 max=0.001215 Jy/beam
! Clean residual mean=0.000000 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.0673054 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 66 components and 0.0673054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053250Jy  sigma=1.290372
! Fit after  self-cal, rms=0.053259Jy  sigma=1.289636
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053259Jy  sigma=1.289636
! Fit after  self-cal, rms=0.053588Jy  sigma=1.287433
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.138 mas, bmaj=1.633 mas, bpa=-19.72 degrees
! Estimated noise=0.200433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000517602 Jy
! Component: 100  -  total flux cleaned = 0.000671232 Jy
! Component: 150  -  total flux cleaned = 0.000778307 Jy
! Component: 200  -  total flux cleaned = 0.000840861 Jy
! Total flux subtracted in 200 components = 0.000840861 Jy
! Clean residual min=-0.001065 max=0.001171 Jy/beam
! Clean residual mean=0.000000 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0681463 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 68 components and 0.0681463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053572Jy  sigma=1.287059
! Fit after  self-cal, rms=0.053594Jy  sigma=1.286685
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, 22.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101134 Jy
! Component: 100  -  total flux cleaned = 0.00115048 Jy
! Component: 150  -  total flux cleaned = 0.00132879 Jy
! Component: 200  -  total flux cleaned = 0.00151863 Jy
! Total flux subtracted in 200 components = 0.00151863 Jy
! Clean residual min=-0.001025 max=0.001113 Jy/beam
! Clean residual mean=0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.0696649 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 0.0696649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053566Jy  sigma=1.286101
! Fit after  self-cal, rms=0.053563Jy  sigma=1.285968
! Inverting map 
! Added new window around map position (25, -15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100015 Jy
! Component: 100  -  total flux cleaned = 0.0013311 Jy
! Component: 150  -  total flux cleaned = 0.00142187 Jy
! Component: 200  -  total flux cleaned = 0.0014901 Jy
! Total flux subtracted in 200 components = 0.0014901 Jy
! Clean residual min=-0.000961 max=0.001002 Jy/beam
! Clean residual mean=-0.000000 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.071155 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 98 components and 0.071155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053537Jy  sigma=1.285460
! Fit after  self-cal, rms=0.053535Jy  sigma=1.285315
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053535Jy  sigma=1.285315
! Fit after  self-cal, rms=0.053454Jy  sigma=1.285078
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=1.626 mas, bpa=-19.56 degrees
! Estimated noise=0.200184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000596417 Jy
! Component: 100  -  total flux cleaned = 0.000862402 Jy
! Component: 150  -  total flux cleaned = 0.000931035 Jy
! Component: 200  -  total flux cleaned = 0.000963881 Jy
! Total flux subtracted in 200 components = 0.000963881 Jy
! Clean residual min=-0.000954 max=0.001013 Jy/beam
! Clean residual mean=-0.000000 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.0721189 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 103 components and 0.0721189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053439Jy  sigma=1.284796
! Fit after  self-cal, rms=0.053441Jy  sigma=1.284600
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-34.8, 49.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202954 Jy
! Component: 100  -  total flux cleaned = 0.00043093 Jy
! Component: 150  -  total flux cleaned = 0.000703084 Jy
! Component: 200  -  total flux cleaned = 0.000842607 Jy
! Total flux subtracted in 200 components = 0.000842607 Jy
! Clean residual min=-0.000897 max=0.000822 Jy/beam
! Clean residual mean=-0.000000 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.0729615 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 121 components and 0.0729615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053415Jy  sigma=1.284060
! Fit after  self-cal, rms=0.053412Jy  sigma=1.283960
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053412Jy  sigma=1.283960
! Fit after  self-cal, rms=0.053344Jy  sigma=1.283911
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.438 mas, bmaj=2.618 mas, bpa=-14.55 degrees
! Estimated noise=0.238582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000494329 Jy
! Component: 100  -  total flux cleaned = 0.000782512 Jy
! Component: 150  -  total flux cleaned = 0.000960988 Jy
! Component: 200  -  total flux cleaned = 0.00108585 Jy
! Total flux subtracted in 200 components = 0.00108585 Jy
! Clean residual min=-0.000712 max=0.000826 Jy/beam
! Clean residual mean=-0.000000 rms=0.000202 Jy/beam
! Combined flux in latest and established models = 0.0740473 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 0.0740473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053337Jy  sigma=1.283754
! Fit after  self-cal, rms=0.053339Jy  sigma=1.283724
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000292634 Jy
! Component: 100  -  total flux cleaned = 0.000391595 Jy
! Component: 150  -  total flux cleaned = 0.000461125 Jy
! Component: 200  -  total flux cleaned = 0.000525623 Jy
! Total flux subtracted in 200 components = 0.000525623 Jy
! Clean residual min=-0.000713 max=0.000806 Jy/beam
! Clean residual mean=-0.000000 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.074573 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 149 components and 0.074573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053334Jy  sigma=1.283626
! Fit after  self-cal, rms=0.053333Jy  sigma=1.283612
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.13 mas, bmaj=1.624 mas, bpa=-19.6 degrees
! Estimated noise=0.199804 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.13 x 1.624 at -19.6 degrees (North through East)
! Clean map  min=-0.0011711  max=0.041679 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8084 mas, bmaj=1.235 mas, bpa=-12.93 degrees
! Estimated noise=0.450116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0302621 Jy
! Component: 100  -  total flux cleaned = 0.0403193 Jy
! Component: 150  -  total flux cleaned = 0.0467216 Jy
! Component: 200  -  total flux cleaned = 0.0514413 Jy
! Total flux subtracted in 200 components = 0.0514413 Jy
! Clean residual min=-0.002969 max=0.003171 Jy/beam
! Clean residual mean=-0.000001 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.0514413 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0514413 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.13 mas, bmaj=1.624 mas, bpa=-19.6 degrees
! Estimated noise=0.199804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00592295 Jy
! Component: 100  -  total flux cleaned = 0.00966594 Jy
! Component: 150  -  total flux cleaned = 0.0122593 Jy
! Component: 200  -  total flux cleaned = 0.0142476 Jy
! Total flux subtracted in 200 components = 0.0142476 Jy
! Clean residual min=-0.001326 max=0.001379 Jy/beam
! Clean residual mean=-0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.0656889 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 48 components and 0.0656889 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.438 mas, bmaj=2.618 mas, bpa=-14.55 degrees
! Estimated noise=0.238582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206885 Jy
! Component: 100  -  total flux cleaned = 0.00345692 Jy
! Component: 150  -  total flux cleaned = 0.00453493 Jy
! Component: 200  -  total flux cleaned = 0.00541736 Jy
! Total flux subtracted in 200 components = 0.00541736 Jy
! Clean residual min=-0.001053 max=0.001070 Jy/beam
! Clean residual mean=-0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0711063 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000652524 Jy
! Component: 100  -  total flux cleaned = 0.00111309 Jy
! Component: 150  -  total flux cleaned = 0.00147595 Jy
! Component: 200  -  total flux cleaned = 0.0017399 Jy
! Total flux subtracted in 200 components = 0.0017399 Jy
! Clean residual min=-0.000898 max=0.000959 Jy/beam
! Clean residual mean=-0.000000 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0728462 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 89 components and 0.0728462 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.13 mas, bmaj=1.624 mas, bpa=-19.6 degrees
! Estimated noise=0.199804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.25592e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112463 Jy
! Component: 150  -  total flux cleaned = 0.000222425 Jy
! Component: 200  -  total flux cleaned = 0.000371675 Jy
! Total flux subtracted in 200 components = 0.000371675 Jy
! Clean residual min=-0.000961 max=0.000923 Jy/beam
! Clean residual mean=-0.000000 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0732178 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 104 components and 0.0732178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053364Jy  sigma=1.284539
! Fit after  self-cal, rms=0.053350Jy  sigma=1.284222
wmodel /J1628+4734_X_map.mod
! wmodel: Unable to open new model file: /J1628+4734_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1628+4734_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.13 x 1.624 at -19.6 degrees (North through East)
! Clean map  min=-0.0011696  max=0.04174 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1628+4734_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0417398 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000219023 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.5742 1.5742 3.1484 6.2968 12.5936 25.1872 50.3744
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.041 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  190.573 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1628+4734_X_dfm.log closed on Thu May 19 23:28:25 2016