! Started logfile: /scr/pima/bg219i_uvs/J1622+1426_X_uvs.log on Wed Apr  6 23:49:48 2016
obs /scr/pima/bg219i_uvs/J1622+1426_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1622+1426_X_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.803333 visibilities/baseline/integration-bin.
! Found source: J1622+1426
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17352 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1622+1426_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.006973Jy  sigma=26.573378
! Fit after  self-cal, rms=0.913789Jy  sigma=24.047390
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.737 mas, bmaj=1.677 mas, bpa=-0.9201 degrees
! Estimated noise=0.365718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0631681 Jy
! Component: 100  -  total flux cleaned = 0.0897206 Jy
! Total flux subtracted in 100 components = 0.0897206 Jy
! Clean residual min=-0.005828 max=0.012970 Jy/beam
! Clean residual mean=-0.000012 rms=0.001585 Jy/beam
! Combined flux in latest and established models = 0.0897206 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0897206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061467Jy  sigma=1.558964
! Fit after  self-cal, rms=0.060617Jy  sigma=1.537696
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158167 Jy
! Component: 100  -  total flux cleaned = 0.0242733 Jy
! Total flux subtracted in 100 components = 0.0242733 Jy
! Clean residual min=-0.003328 max=0.006417 Jy/beam
! Clean residual mean=-0.000005 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.113994 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.113994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055531Jy  sigma=1.387585
! Fit after  self-cal, rms=0.055416Jy  sigma=1.385326
! Inverting map 
! Added new window around map position (-0.8, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00634233 Jy
! Component: 100  -  total flux cleaned = 0.00962553 Jy
! Total flux subtracted in 100 components = 0.00962553 Jy
! Clean residual min=-0.002863 max=0.005011 Jy/beam
! Clean residual mean=-0.000003 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.123619 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.123619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054606Jy  sigma=1.361795
! Fit after  self-cal, rms=0.054535Jy  sigma=1.360332
! Inverting map 
! Added new window around map position (3.4, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00453629 Jy
! Component: 100  -  total flux cleaned = 0.00714186 Jy
! Total flux subtracted in 100 components = 0.00714186 Jy
! Clean residual min=-0.002466 max=0.002576 Jy/beam
! Clean residual mean=-0.000001 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.130761 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 29 components and 0.130761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.054136Jy  sigma=1.349958
! Fit after  self-cal, rms=0.054082Jy  sigma=1.348680
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8885 mas, bmaj=1.939 mas, bpa=-1.626 degrees
! Estimated noise=0.270732 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00307161 Jy
! Component: 100  -  total flux cleaned = 0.00492163 Jy
! Component: 150  -  total flux cleaned = 0.00599005 Jy
! Component: 200  -  total flux cleaned = 0.00661621 Jy
! Total flux subtracted in 200 components = 0.00661621 Jy
! Clean residual min=-0.001948 max=0.001813 Jy/beam
! Clean residual mean=0.000001 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.137378 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 49 components and 0.137378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053881Jy  sigma=1.343487
! Fit after  self-cal, rms=0.053857Jy  sigma=1.342948
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8885 x 1.939 at -1.626 degrees (North through East)
! Clean map  min=-0.0017165  max=0.083565 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.11     KP        1.00     
!   LA        0.97     MK        1.09     NL        1.03     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.97     MK        1.06     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        1.03     
!   LA        0.96     MK        0.88     NL        1.03     OV        0.95     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.97     KP        1.02     
!   LA        1.00     MK        0.97     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.11     KP        1.03     
!   LA        1.00     MK        0.99     NL        1.03     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.96     KP        0.99     
!   LA        1.03     MK        0.92     NL        1.02     OV        0.97     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.04     KP        1.03     
!   LA        0.98     MK        0.87     NL        1.01     OV        0.98     
!   PT        0.98     SC        0.93     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053857Jy  sigma=1.342948
! Fit after  self-cal, rms=0.053578Jy  sigma=1.339071
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8812 mas, bmaj=1.938 mas, bpa=-1.782 degrees
! Estimated noise=0.267981 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000471067 Jy
! Component: 100  -  total flux cleaned = 0.000537969 Jy
! Component: 150  -  total flux cleaned = 0.000566149 Jy
! Component: 200  -  total flux cleaned = 0.000615901 Jy
! Total flux subtracted in 200 components = 0.000615901 Jy
! Clean residual min=-0.001345 max=0.001428 Jy/beam
! Clean residual mean=0.000002 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.137993 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.137993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053539Jy  sigma=1.338165
! Fit after  self-cal, rms=0.053542Jy  sigma=1.338024
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053542Jy  sigma=1.338024
! Fit after  self-cal, rms=0.053360Jy  sigma=1.335411
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8753 mas, bmaj=1.93 mas, bpa=-2.239 degrees
! Estimated noise=0.266357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000365019 Jy
! Component: 100  -  total flux cleaned = 0.000364898 Jy
! Component: 150  -  total flux cleaned = 0.000403675 Jy
! Component: 200  -  total flux cleaned = 0.000403748 Jy
! Total flux subtracted in 200 components = 0.000403748 Jy
! Clean residual min=-0.001299 max=0.001409 Jy/beam
! Clean residual mean=0.000002 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.138397 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 75 components and 0.138397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053341Jy  sigma=1.335008
! Fit after  self-cal, rms=0.053343Jy  sigma=1.334927
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.4, 33.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049384 Jy
! Component: 100  -  total flux cleaned = 0.000587675 Jy
! Component: 150  -  total flux cleaned = 0.000609968 Jy
! Component: 200  -  total flux cleaned = 0.00060935 Jy
! Total flux subtracted in 200 components = 0.00060935 Jy
! Clean residual min=-0.001259 max=0.001247 Jy/beam
! Clean residual mean=0.000003 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.139006 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 90 components and 0.139006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053301Jy  sigma=1.333963
! Fit after  self-cal, rms=0.053290Jy  sigma=1.333860
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053290Jy  sigma=1.333860
! Fit after  self-cal, rms=0.053069Jy  sigma=1.333780
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8719 mas, bmaj=1.928 mas, bpa=-2.436 degrees
! Estimated noise=0.264859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.27684e-05 Jy
! Component: 100  -  total flux cleaned = -7.30661e-05 Jy
! Component: 150  -  total flux cleaned = -0.000107374 Jy
! Component: 200  -  total flux cleaned = -0.000155087 Jy
! Total flux subtracted in 200 components = -0.000155087 Jy
! Clean residual min=-0.001234 max=0.001223 Jy/beam
! Clean residual mean=0.000002 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.138851 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 94 components and 0.138851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053054Jy  sigma=1.333441
! Fit after  self-cal, rms=0.053051Jy  sigma=1.333412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129049 Jy
! Component: 100  -  total flux cleaned = -0.000158161 Jy
! Component: 150  -  total flux cleaned = -0.00015796 Jy
! Component: 200  -  total flux cleaned = -0.000171176 Jy
! Total flux subtracted in 200 components = -0.000171176 Jy
! Clean residual min=-0.001200 max=0.001213 Jy/beam
! Clean residual mean=0.000002 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.13868 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 98 components and 0.13868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053043Jy  sigma=1.333245
! Fit after  self-cal, rms=0.053041Jy  sigma=1.333236
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053041Jy  sigma=1.333236
! Fit after  self-cal, rms=0.053001Jy  sigma=1.333209
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.153 mas, bmaj=2.968 mas, bpa=-3.084 degrees
! Estimated noise=0.341094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214666 Jy
! Component: 100  -  total flux cleaned = 0.000225945 Jy
! Component: 150  -  total flux cleaned = 0.000237566 Jy
! Component: 200  -  total flux cleaned = 0.000247027 Jy
! Total flux subtracted in 200 components = 0.000247027 Jy
! Clean residual min=-0.001302 max=0.001542 Jy/beam
! Clean residual mean=0.000005 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.138927 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 109 components and 0.138927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.052999Jy  sigma=1.333159
! Fit after  self-cal, rms=0.053000Jy  sigma=1.333148
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.63787e-05 Jy
! Component: 100  -  total flux cleaned = 8.93189e-06 Jy
! Component: 150  -  total flux cleaned = 1.65822e-05 Jy
! Component: 200  -  total flux cleaned = 1.01197e-05 Jy
! Total flux subtracted in 200 components = 1.01197e-05 Jy
! Clean residual min=-0.001277 max=0.001530 Jy/beam
! Clean residual mean=0.000005 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.138937 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 116 components and 0.138937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.052999Jy  sigma=1.333142
! Fit after  self-cal, rms=0.052998Jy  sigma=1.333139
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8706 mas, bmaj=1.929 mas, bpa=-2.54 degrees
! Estimated noise=0.264218 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8706 x 1.929 at -2.54 degrees (North through East)
! Clean map  min=-0.0014338  max=0.0819 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7229 mas, bmaj=1.666 mas, bpa=-1.891 degrees
! Estimated noise=0.353309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0627875 Jy
! Component: 100  -  total flux cleaned = 0.0906015 Jy
! Component: 150  -  total flux cleaned = 0.105251 Jy
! Component: 200  -  total flux cleaned = 0.114202 Jy
! Total flux subtracted in 200 components = 0.114202 Jy
! Clean residual min=-0.002959 max=0.004833 Jy/beam
! Clean residual mean=-0.000005 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.114202 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.114202 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8706 mas, bmaj=1.929 mas, bpa=-2.54 degrees
! Estimated noise=0.264218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00808325 Jy
! Component: 100  -  total flux cleaned = 0.0132665 Jy
! Component: 150  -  total flux cleaned = 0.0168094 Jy
! Component: 200  -  total flux cleaned = 0.0193091 Jy
! Total flux subtracted in 200 components = 0.0193091 Jy
! Clean residual min=-0.001572 max=0.001764 Jy/beam
! Clean residual mean=0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.133511 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 35 components and 0.133511 Jy
! Inverting map 
! Added new window around map position (21.6, 14.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193217 Jy
! Component: 100  -  total flux cleaned = 0.00289272 Jy
! Component: 150  -  total flux cleaned = 0.00349904 Jy
! Component: 200  -  total flux cleaned = 0.00376019 Jy
! Total flux subtracted in 200 components = 0.00376019 Jy
! Clean residual min=-0.001308 max=0.001350 Jy/beam
! Clean residual mean=0.000002 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.137271 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 51 components and 0.137271 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.153 mas, bmaj=2.968 mas, bpa=-3.084 degrees
! Estimated noise=0.341094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000765653 Jy
! Component: 100  -  total flux cleaned = 0.00102717 Jy
! Component: 150  -  total flux cleaned = 0.00133158 Jy
! Component: 200  -  total flux cleaned = 0.00152342 Jy
! Total flux subtracted in 200 components = 0.00152342 Jy
! Clean residual min=-0.001272 max=0.001435 Jy/beam
! Clean residual mean=0.000004 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.138795 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129592 Jy
! Component: 100  -  total flux cleaned = 0.000247857 Jy
! Component: 150  -  total flux cleaned = 0.000337529 Jy
! Component: 200  -  total flux cleaned = 0.000419457 Jy
! Total flux subtracted in 200 components = 0.000419457 Jy
! Clean residual min=-0.001223 max=0.001403 Jy/beam
! Clean residual mean=0.000004 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.139214 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 79 components and 0.139214 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8706 mas, bmaj=1.929 mas, bpa=-2.54 degrees
! Estimated noise=0.264218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162984 Jy
! Component: 100  -  total flux cleaned = -0.000265881 Jy
! Component: 150  -  total flux cleaned = -0.000310762 Jy
! Component: 200  -  total flux cleaned = -0.000350858 Jy
! Total flux subtracted in 200 components = -0.000350858 Jy
! Clean residual min=-0.001225 max=0.001182 Jy/beam
! Clean residual mean=0.000002 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.138863 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 94 components and 0.138863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053001Jy  sigma=1.333188
! Fit after  self-cal, rms=0.052991Jy  sigma=1.333019
wmodel /scr/pima/bg219i_uvs/J1622+1426_X_map.mod
! Writing 94 model components to file: /scr/pima/bg219i_uvs/J1622+1426_X_map.mod
wobs /scr/pima/bg219i_uvs/J1622+1426_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J1622+1426_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J1622+1426_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bg219i_uvs/J1622+1426_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000166387 Jy
! Component: 100  -  total flux cleaned = -0.00012277 Jy
! Component: 150  -  total flux cleaned = -0.00012243 Jy
! Component: 200  -  total flux cleaned = 1.44661e-05 Jy
! Component: 250  -  total flux cleaned = 0.000128554 Jy
! Component: 300  -  total flux cleaned = 0.000257901 Jy
! Component: 350  -  total flux cleaned = 0.000311855 Jy
! Component: 400  -  total flux cleaned = 0.000364993 Jy
! Component: 450  -  total flux cleaned = 0.000468517 Jy
! Component: 500  -  total flux cleaned = 0.000603374 Jy
! Component: 550  -  total flux cleaned = 0.000718535 Jy
! Component: 600  -  total flux cleaned = 0.000783086 Jy
! Component: 650  -  total flux cleaned = 0.000909886 Jy
! Component: 700  -  total flux cleaned = 0.00095629 Jy
! Component: 750  -  total flux cleaned = 0.0009868 Jy
! Component: 800  -  total flux cleaned = 0.00104694 Jy
! Component: 850  -  total flux cleaned = 0.00110621 Jy
! Component: 900  -  total flux cleaned = 0.00114976 Jy
! Component: 950  -  total flux cleaned = 0.0011784 Jy
! Component: 1000  -  total flux cleaned = 0.00116423 Jy
! Component: 1050  -  total flux cleaned = 0.00117806 Jy
! Component: 1100  -  total flux cleaned = 0.00117791 Jy
! Component: 1150  -  total flux cleaned = 0.00119146 Jy
! Component: 1200  -  total flux cleaned = 0.00116468 Jy
! Component: 1250  -  total flux cleaned = 0.00121744 Jy
! Component: 1300  -  total flux cleaned = 0.00117826 Jy
! Component: 1350  -  total flux cleaned = 0.00124266 Jy
! Component: 1400  -  total flux cleaned = 0.00125521 Jy
! Component: 1450  -  total flux cleaned = 0.00126771 Jy
! Component: 1500  -  total flux cleaned = 0.00129246 Jy
! Component: 1550  -  total flux cleaned = 0.00134129 Jy
! Component: 1600  -  total flux cleaned = 0.00126865 Jy
! Component: 1650  -  total flux cleaned = 0.00134064 Jy
! Component: 1700  -  total flux cleaned = 0.00135234 Jy
! Component: 1750  -  total flux cleaned = 0.00130551 Jy
! Component: 1800  -  total flux cleaned = 0.00137505 Jy
! Component: 1850  -  total flux cleaned = 0.00130622 Jy
! Component: 1900  -  total flux cleaned = 0.00135166 Jy
! Component: 1950  -  total flux cleaned = 0.00134055 Jy
! Component: 2000  -  total flux cleaned = 0.00136294 Jy
! Component: 2050  -  total flux cleaned = 0.00135193 Jy
! Component: 2100  -  total flux cleaned = 0.00138452 Jy
! Component: 2150  -  total flux cleaned = 0.00138447 Jy
! Component: 2200  -  total flux cleaned = 0.00141649 Jy
! Component: 2250  -  total flux cleaned = 0.00138464 Jy
! Component: 2300  -  total flux cleaned = 0.00132176 Jy
! Component: 2350  -  total flux cleaned = 0.00134268 Jy
! Component: 2400  -  total flux cleaned = 0.00131168 Jy
! Component: 2450  -  total flux cleaned = 0.00131162 Jy
! Component: 2500  -  total flux cleaned = 0.00128119 Jy
! Component: 2550  -  total flux cleaned = 0.0012711 Jy
! Component: 2600  -  total flux cleaned = 0.00125104 Jy
! Component: 2650  -  total flux cleaned = 0.0012115 Jy
! Component: 2700  -  total flux cleaned = 0.00121143 Jy
! Component: 2750  -  total flux cleaned = 0.00120166 Jy
! Component: 2800  -  total flux cleaned = 0.00116285 Jy
! Component: 2850  -  total flux cleaned = 0.00115318 Jy
! Component: 2900  -  total flux cleaned = 0.00112455 Jy
! Component: 2950  -  total flux cleaned = 0.00110562 Jy
! Component: 3000  -  total flux cleaned = 0.00106818 Jy
! Component: 3050  -  total flux cleaned = 0.00107756 Jy
! Component: 3100  -  total flux cleaned = 0.00104986 Jy
! Component: 3150  -  total flux cleaned = 0.00104076 Jy
! Component: 3200  -  total flux cleaned = 0.000986263 Jy
! Component: 3250  -  total flux cleaned = 0.000959041 Jy
! Component: 3300  -  total flux cleaned = 0.000941114 Jy
! Component: 3350  -  total flux cleaned = 0.000887497 Jy
! Component: 3400  -  total flux cleaned = 0.000896414 Jy
! Component: 3450  -  total flux cleaned = 0.000826008 Jy
! Component: 3500  -  total flux cleaned = 0.000834704 Jy
! Component: 3550  -  total flux cleaned = 0.000773947 Jy
! Component: 3600  -  total flux cleaned = 0.000756671 Jy
! Component: 3650  -  total flux cleaned = 0.000739535 Jy
! Component: 3700  -  total flux cleaned = 0.000730999 Jy
! Component: 3750  -  total flux cleaned = 0.000730992 Jy
! Component: 3800  -  total flux cleaned = 0.000688965 Jy
! Component: 3850  -  total flux cleaned = 0.000663903 Jy
! Component: 3900  -  total flux cleaned = 0.000638939 Jy
! Component: 3950  -  total flux cleaned = 0.000663558 Jy
! Component: 4000  -  total flux cleaned = 0.000573314 Jy
! Component: 4050  -  total flux cleaned = 0.000581522 Jy
! Total flux subtracted in 4096 components = 0.000549066 Jy
! Clean residual min=-0.000450 max=0.000539 Jy/beam
! Clean residual mean=0.000000 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.139412 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 364 components and 0.139412 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J1622+1426_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8706 x 1.929 at -2.54 degrees (North through East)
! Clean map  min=-0.0012627  max=0.081749 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1622+1426_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.081749 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000133476 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.489825 0.489825 0.979649 1.9593 3.9186 7.83719 15.6744 31.3488 62.6976
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.081 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  612.464 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1622+1426_X_uvs.log closed on Wed Apr  6 23:49:53 2016