! Started logfile: /scr/pima/bg219i_uvs/J1622+1426_X_dfm.log on Thu May 19 23:28:13 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1622+1426_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1622+1426_X_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.803333 visibilities/baseline/integration-bin.
! Found source: J1622+1426
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17352 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1622+1426_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007796Jy  sigma=25.558792
! Fit after  self-cal, rms=0.913837Jy  sigma=23.109559
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7112 mas, bmaj=1.615 mas, bpa=-1.652 degrees
! Estimated noise=0.370533 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0613443 Jy
! Component: 100  -  total flux cleaned = 0.0867821 Jy
! Total flux subtracted in 100 components = 0.0867821 Jy
! Clean residual min=-0.004925 max=0.012681 Jy/beam
! Clean residual mean=-0.000014 rms=0.001438 Jy/beam
! Combined flux in latest and established models = 0.0867821 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0867821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064970Jy  sigma=1.568626
! Fit after  self-cal, rms=0.064167Jy  sigma=1.549540
! Inverting map 
! Added new window around map position (-0.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161031 Jy
! Component: 100  -  total flux cleaned = 0.0251688 Jy
! Total flux subtracted in 100 components = 0.0251688 Jy
! Clean residual min=-0.003018 max=0.006404 Jy/beam
! Clean residual mean=-0.000007 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.111951 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.111951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058790Jy  sigma=1.396957
! Fit after  self-cal, rms=0.058607Jy  sigma=1.392781
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00641245 Jy
! Component: 100  -  total flux cleaned = 0.00985252 Jy
! Total flux subtracted in 100 components = 0.00985252 Jy
! Clean residual min=-0.002865 max=0.004288 Jy/beam
! Clean residual mean=-0.000004 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.121803 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 0.121803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057745Jy  sigma=1.368054
! Fit after  self-cal, rms=0.057676Jy  sigma=1.366503
! Inverting map 
! Added new window around map position (3.4, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00403572 Jy
! Component: 100  -  total flux cleaned = 0.00633794 Jy
! Total flux subtracted in 100 components = 0.00633794 Jy
! Clean residual min=-0.002633 max=0.002801 Jy/beam
! Clean residual mean=-0.000002 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.128141 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 30 components and 0.128141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057328Jy  sigma=1.357402
! Fit after  self-cal, rms=0.057289Jy  sigma=1.356497
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8822 mas, bmaj=1.924 mas, bpa=-1.515 degrees
! Estimated noise=0.215748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324739 Jy
! Component: 100  -  total flux cleaned = 0.00536666 Jy
! Component: 150  -  total flux cleaned = 0.00681999 Jy
! Component: 200  -  total flux cleaned = 0.00786932 Jy
! Total flux subtracted in 200 components = 0.00786932 Jy
! Clean residual min=-0.001422 max=0.001499 Jy/beam
! Clean residual mean=-0.000001 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.136011 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 39 components and 0.136011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057068Jy  sigma=1.350823
! Fit after  self-cal, rms=0.057032Jy  sigma=1.350183
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8822 x 1.924 at -1.515 degrees (North through East)
! Clean map  min=-0.0012969  max=0.083496 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.10     KP        1.00     
!   LA        0.97     MK        1.14     NL        1.03     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.97     MK        1.10     NL        1.00     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        1.03     
!   LA        0.96     MK        0.92     NL        1.02     OV        0.95     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.97     KP        1.02     
!   LA        1.00     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.97     KP        1.01     
!   LA        0.98     MK        0.91     NL        1.02     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.10     KP        1.02     
!   LA        1.00     MK        1.04     NL        1.03     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.96     KP        0.98     
!   LA        1.03     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.04     KP        1.02     
!   LA        0.98     MK        0.93     NL        1.01     OV        0.98     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.01     KP        1.04     
!   LA        1.03     MK        0.92     NL        1.00     OV        0.96     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.05     KP        1.00     
!   LA        1.03     MK        0.92     NL        1.02     OV        0.99     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.00     KP        1.04     
!   LA        1.00     MK        0.98     NL        1.03     OV        0.94     
!   PT        0.94     SC        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.97     KP        1.03     
!   LA        1.03     MK        0.96     NL        1.01     OV        0.95     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.057032Jy  sigma=1.350183
! Fit after  self-cal, rms=0.056455Jy  sigma=1.346617
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8781 mas, bmaj=1.923 mas, bpa=-1.467 degrees
! Estimated noise=0.21338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000942963 Jy
! Component: 100  -  total flux cleaned = 0.00104268 Jy
! Component: 150  -  total flux cleaned = 0.0010186 Jy
! Component: 200  -  total flux cleaned = 0.000954811 Jy
! Total flux subtracted in 200 components = 0.000954811 Jy
! Clean residual min=-0.001211 max=0.001141 Jy/beam
! Clean residual mean=0.000000 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.136965 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 58 components and 0.136965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056421Jy  sigma=1.345810
! Fit after  self-cal, rms=0.056421Jy  sigma=1.345656
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056421Jy  sigma=1.345656
! Fit after  self-cal, rms=0.056529Jy  sigma=1.343413
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8763 mas, bmaj=1.92 mas, bpa=-1.547 degrees
! Estimated noise=0.213341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000456805 Jy
! Component: 100  -  total flux cleaned = 0.0004804 Jy
! Component: 150  -  total flux cleaned = 0.000428145 Jy
! Component: 200  -  total flux cleaned = 0.000364587 Jy
! Total flux subtracted in 200 components = 0.000364587 Jy
! Clean residual min=-0.001082 max=0.001091 Jy/beam
! Clean residual mean=0.000000 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.13733 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 64 components and 0.13733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056514Jy  sigma=1.343104
! Fit after  self-cal, rms=0.056513Jy  sigma=1.343033
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017271 Jy
! Component: 100  -  total flux cleaned = 0.00017252 Jy
! Component: 150  -  total flux cleaned = 0.000145055 Jy
! Component: 200  -  total flux cleaned = 0.000132748 Jy
! Total flux subtracted in 200 components = 0.000132748 Jy
! Clean residual min=-0.001052 max=0.001078 Jy/beam
! Clean residual mean=0.000000 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.137463 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 70 components and 0.137463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056506Jy  sigma=1.342878
! Fit after  self-cal, rms=0.056503Jy  sigma=1.342864
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056503Jy  sigma=1.342864
! Fit after  self-cal, rms=0.056473Jy  sigma=1.342840
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8749 mas, bmaj=1.918 mas, bpa=-1.567 degrees
! Estimated noise=0.213039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194875 Jy
! Component: 100  -  total flux cleaned = 0.000168856 Jy
! Component: 150  -  total flux cleaned = 0.000145318 Jy
! Component: 200  -  total flux cleaned = 0.000156557 Jy
! Total flux subtracted in 200 components = 0.000156557 Jy
! Clean residual min=-0.001058 max=0.001079 Jy/beam
! Clean residual mean=0.000001 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.137619 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 73 components and 0.137619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056466Jy  sigma=1.342722
! Fit after  self-cal, rms=0.056465Jy  sigma=1.342711
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.06247e-05 Jy
! Component: 100  -  total flux cleaned = 6.15398e-05 Jy
! Component: 150  -  total flux cleaned = 6.17801e-05 Jy
! Component: 200  -  total flux cleaned = 7.15359e-05 Jy
! Total flux subtracted in 200 components = 7.15359e-05 Jy
! Clean residual min=-0.001054 max=0.001074 Jy/beam
! Clean residual mean=0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.137691 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 80 components and 0.137691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056461Jy  sigma=1.342637
! Fit after  self-cal, rms=0.056459Jy  sigma=1.342629
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056459Jy  sigma=1.342629
! Fit after  self-cal, rms=0.056444Jy  sigma=1.342624
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.156 mas, bmaj=2.954 mas, bpa=-2.954 degrees
! Estimated noise=0.271895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000215485 Jy
! Component: 100  -  total flux cleaned = 0.000215654 Jy
! Component: 150  -  total flux cleaned = 0.000215077 Jy
! Component: 200  -  total flux cleaned = 0.000228264 Jy
! Total flux subtracted in 200 components = 0.000228264 Jy
! Clean residual min=-0.001246 max=0.001268 Jy/beam
! Clean residual mean=0.000001 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.137919 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 88 components and 0.137919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056442Jy  sigma=1.342605
! Fit after  self-cal, rms=0.056442Jy  sigma=1.342597
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.60508e-05 Jy
! Component: 100  -  total flux cleaned = 5.81619e-05 Jy
! Component: 150  -  total flux cleaned = 6.86249e-05 Jy
! Component: 200  -  total flux cleaned = 7.78008e-05 Jy
! Total flux subtracted in 200 components = 7.78008e-05 Jy
! Clean residual min=-0.001249 max=0.001250 Jy/beam
! Clean residual mean=0.000002 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.137997 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.137997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056441Jy  sigma=1.342598
! Fit after  self-cal, rms=0.056440Jy  sigma=1.342596
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8743 mas, bmaj=1.917 mas, bpa=-1.576 degrees
! Estimated noise=0.212849 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8743 x 1.917 at -1.576 degrees (North through East)
! Clean map  min=-0.00099038  max=0.082548 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7048 mas, bmaj=1.61 mas, bpa=-1.829 degrees
! Estimated noise=0.364972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0621085 Jy
! Component: 100  -  total flux cleaned = 0.0890589 Jy
! Component: 150  -  total flux cleaned = 0.103538 Jy
! Component: 200  -  total flux cleaned = 0.112477 Jy
! Total flux subtracted in 200 components = 0.112477 Jy
! Clean residual min=-0.003111 max=0.004801 Jy/beam
! Clean residual mean=-0.000007 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.112477 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.112477 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8743 mas, bmaj=1.917 mas, bpa=-1.576 degrees
! Estimated noise=0.212849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00862304 Jy
! Component: 100  -  total flux cleaned = 0.0139841 Jy
! Component: 150  -  total flux cleaned = 0.0176443 Jy
! Component: 200  -  total flux cleaned = 0.0202081 Jy
! Total flux subtracted in 200 components = 0.0202081 Jy
! Clean residual min=-0.001259 max=0.001446 Jy/beam
! Clean residual mean=-0.000001 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.132685 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 28 components and 0.132685 Jy
! Inverting map 
! Added new window around map position (7.8, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183824 Jy
! Component: 100  -  total flux cleaned = 0.00317408 Jy
! Component: 150  -  total flux cleaned = 0.00393574 Jy
! Component: 200  -  total flux cleaned = 0.00430935 Jy
! Total flux subtracted in 200 components = 0.00430935 Jy
! Clean residual min=-0.001106 max=0.001095 Jy/beam
! Clean residual mean=0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.136994 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 41 components and 0.136994 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.156 mas, bmaj=2.954 mas, bpa=-2.954 degrees
! Estimated noise=0.271895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.96553e-05 Jy
! Component: 100  -  total flux cleaned = 0.000342654 Jy
! Component: 150  -  total flux cleaned = 0.000482155 Jy
! Component: 200  -  total flux cleaned = 0.000616773 Jy
! Total flux subtracted in 200 components = 0.000616773 Jy
! Clean residual min=-0.001250 max=0.001118 Jy/beam
! Clean residual mean=0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.137611 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103826 Jy
! Component: 100  -  total flux cleaned = 0.000205362 Jy
! Component: 150  -  total flux cleaned = 0.000265158 Jy
! Component: 200  -  total flux cleaned = 0.000301946 Jy
! Total flux subtracted in 200 components = 0.000301946 Jy
! Clean residual min=-0.001252 max=0.001104 Jy/beam
! Clean residual mean=0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.137913 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 69 components and 0.137913 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8743 mas, bmaj=1.917 mas, bpa=-1.576 degrees
! Estimated noise=0.212849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.91704e-05 Jy
! Component: 100  -  total flux cleaned = 4.58075e-05 Jy
! Component: 150  -  total flux cleaned = 4.53779e-05 Jy
! Component: 200  -  total flux cleaned = 3.09719e-05 Jy
! Total flux subtracted in 200 components = 3.09719e-05 Jy
! Clean residual min=-0.001108 max=0.001093 Jy/beam
! Clean residual mean=0.000001 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.137944 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 87 components and 0.137944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056434Jy  sigma=1.342416
! Fit after  self-cal, rms=0.056427Jy  sigma=1.342280
wmodel /J1622+1426_X_map.mod
! wmodel: Unable to open new model file: /J1622+1426_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1622+1426_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8743 x 1.917 at -1.576 degrees (North through East)
! Clean map  min=-0.0010041  max=0.082471 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1622+1426_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0824709 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000253729 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.922977 0.922977 1.84595 3.69191 7.38382 14.7676 29.5353 59.0705
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.082 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  325.035 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1622+1426_X_dfm.log closed on Thu May 19 23:28:16 2016