! Started logfile: /scr/pima/bg219i_uvs/J1615+2130_X_dfm.log on Thu May 19 23:27:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1615+2130_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1615+2130_X_uva.fits
! AN table 1: 73 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.765297 visibilities/baseline/integration-bin.
! Found source: J1615+2130
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30168 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1615+2130_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 107 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008001Jy  sigma=23.738565
! Fit after  self-cal, rms=0.892716Jy  sigma=21.042761
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7236 mas, bmaj=1.482 mas, bpa=-2.331 degrees
! Estimated noise=0.397478 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0780246 Jy
! Component: 100  -  total flux cleaned = 0.0977066 Jy
! Total flux subtracted in 100 components = 0.0977066 Jy
! Clean residual min=-0.004648 max=0.008312 Jy/beam
! Clean residual mean=-0.000005 rms=0.001147 Jy/beam
! Combined flux in latest and established models = 0.0977067 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0977067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064111Jy  sigma=1.423249
! Fit after  self-cal, rms=0.063955Jy  sigma=1.419688
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00948147 Jy
! Component: 100  -  total flux cleaned = 0.0147692 Jy
! Total flux subtracted in 100 components = 0.0147692 Jy
! Clean residual min=-0.003620 max=0.007329 Jy/beam
! Clean residual mean=-0.000004 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.112476 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.112476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061379Jy  sigma=1.357481
! Fit after  self-cal, rms=0.061365Jy  sigma=1.357104
! Inverting map 
! Added new window around map position (-1.6, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00671308 Jy
! Component: 100  -  total flux cleaned = 0.0107098 Jy
! Total flux subtracted in 100 components = 0.0107098 Jy
! Clean residual min=-0.003145 max=0.004434 Jy/beam
! Clean residual mean=-0.000004 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.123186 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 30 components and 0.123186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060063Jy  sigma=1.324610
! Fit after  self-cal, rms=0.059961Jy  sigma=1.322323
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9806 mas, bmaj=1.884 mas, bpa=-2.259 degrees
! Estimated noise=0.186369 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00747426 Jy
! Component: 100  -  total flux cleaned = 0.0118656 Jy
! Component: 150  -  total flux cleaned = 0.01489 Jy
! Component: 200  -  total flux cleaned = 0.0171111 Jy
! Total flux subtracted in 200 components = 0.0171111 Jy
! Clean residual min=-0.001982 max=0.002644 Jy/beam
! Clean residual mean=-0.000006 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.140297 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 69 components and 0.140297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058907Jy  sigma=1.297498
! Fit after  self-cal, rms=0.058819Jy  sigma=1.295004
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9806 x 1.884 at -2.259 degrees (North through East)
! Clean map  min=-0.0017333  max=0.10437 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.13     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.06     OV        0.99     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.04     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.96     KP        1.02     
!   LA        0.95     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.06     KP        1.02     
!   LA        1.00     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.99     KP        1.00     
!   LA        1.01     MK        0.99     NL        1.02     OV        0.94     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.13     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.02     OV        1.00     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        1.02     
!   LA        1.00     MK        1.01     NL        1.03     OV        0.98     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        1.02     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.99     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.92     KP        1.02     
!   LA        1.02     MK        0.99     NL        1.02     OV        0.98     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.98     KP        1.03     
!   LA        1.01     MK        0.99     NL        1.04     OV        0.96     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.96     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.04     OV        0.99     
!   PT        0.95     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.97     KP        0.97     
!   LA        0.97     MK        1.04     NL        1.03     OV        0.96     
!   PT        0.95     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.058819Jy  sigma=1.295004
! Fit after  self-cal, rms=0.057904Jy  sigma=1.290340
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9827 mas, bmaj=1.891 mas, bpa=-1.918 degrees
! Estimated noise=0.184414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.4, -6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235504 Jy
! Component: 100  -  total flux cleaned = 0.00399797 Jy
! Component: 150  -  total flux cleaned = 0.00524249 Jy
! Component: 200  -  total flux cleaned = 0.00620551 Jy
! Total flux subtracted in 200 components = 0.00620551 Jy
! Clean residual min=-0.001311 max=0.001270 Jy/beam
! Clean residual mean=-0.000002 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.146502 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 112 components and 0.146502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057778Jy  sigma=1.287249
! Fit after  self-cal, rms=0.057770Jy  sigma=1.287030
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057770Jy  sigma=1.287030
! Fit after  self-cal, rms=0.057829Jy  sigma=1.285516
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9824 mas, bmaj=1.89 mas, bpa=-1.946 degrees
! Estimated noise=0.184626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000934722 Jy
! Component: 100  -  total flux cleaned = 0.00160181 Jy
! Component: 150  -  total flux cleaned = 0.00199325 Jy
! Component: 200  -  total flux cleaned = 0.0022283 Jy
! Total flux subtracted in 200 components = 0.0022283 Jy
! Clean residual min=-0.001228 max=0.001036 Jy/beam
! Clean residual mean=-0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.148731 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 138 components and 0.148731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057804Jy  sigma=1.284933
! Fit after  self-cal, rms=0.057806Jy  sigma=1.284867
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308974 Jy
! Component: 100  -  total flux cleaned = 0.00054524 Jy
! Component: 150  -  total flux cleaned = 0.000740451 Jy
! Component: 200  -  total flux cleaned = 0.000934526 Jy
! Total flux subtracted in 200 components = 0.000934526 Jy
! Clean residual min=-0.001161 max=0.000980 Jy/beam
! Clean residual mean=-0.000001 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.149665 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 153 components and 0.149665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057796Jy  sigma=1.284598
! Fit after  self-cal, rms=0.057795Jy  sigma=1.284579
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057795Jy  sigma=1.284579
! Fit after  self-cal, rms=0.057834Jy  sigma=1.284530
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.983 mas, bmaj=1.89 mas, bpa=-1.957 degrees
! Estimated noise=0.184708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000350613 Jy
! Component: 100  -  total flux cleaned = 0.000517772 Jy
! Component: 150  -  total flux cleaned = 0.000666412 Jy
! Component: 200  -  total flux cleaned = 0.000813601 Jy
! Total flux subtracted in 200 components = 0.000813601 Jy
! Clean residual min=-0.001119 max=0.000957 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.150479 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 165 components and 0.150479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057827Jy  sigma=1.284329
! Fit after  self-cal, rms=0.057827Jy  sigma=1.284310
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143245 Jy
! Component: 100  -  total flux cleaned = 0.000299058 Jy
! Component: 150  -  total flux cleaned = 0.000404352 Jy
! Component: 200  -  total flux cleaned = 0.000501167 Jy
! Total flux subtracted in 200 components = 0.000501167 Jy
! Clean residual min=-0.001080 max=0.000937 Jy/beam
! Clean residual mean=-0.000000 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.15098 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 172 components and 0.15098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057822Jy  sigma=1.284191
! Fit after  self-cal, rms=0.057822Jy  sigma=1.284181
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057822Jy  sigma=1.284181
! Fit after  self-cal, rms=0.057851Jy  sigma=1.284165
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.236 mas, bmaj=2.875 mas, bpa=1.477 degrees
! Estimated noise=0.227474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000338875 Jy
! Component: 100  -  total flux cleaned = 0.000649661 Jy
! Component: 150  -  total flux cleaned = 0.000933565 Jy
! Component: 200  -  total flux cleaned = 0.00115777 Jy
! Total flux subtracted in 200 components = 0.00115777 Jy
! Clean residual min=-0.001126 max=0.001132 Jy/beam
! Clean residual mean=-0.000001 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.152138 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 185 components and 0.152138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057848Jy  sigma=1.284119
! Fit after  self-cal, rms=0.057847Jy  sigma=1.284099
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.29384e-05 Jy
! Component: 100  -  total flux cleaned = 0.000255117 Jy
! Component: 150  -  total flux cleaned = 0.00036167 Jy
! Component: 200  -  total flux cleaned = 0.000447209 Jy
! Total flux subtracted in 200 components = 0.000447209 Jy
! Clean residual min=-0.001114 max=0.001093 Jy/beam
! Clean residual mean=-0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.152585 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 193 components and 0.152585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057846Jy  sigma=1.284084
! Fit after  self-cal, rms=0.057845Jy  sigma=1.284065
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9838 mas, bmaj=1.89 mas, bpa=-1.964 degrees
! Estimated noise=0.184744 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9838 x 1.89 at -1.964 degrees (North through East)
! Clean map  min=-0.00093651  max=0.10311 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7246 mas, bmaj=1.485 mas, bpa=-1.932 degrees
! Estimated noise=0.395429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0773711 Jy
! Component: 100  -  total flux cleaned = 0.0978723 Jy
! Component: 150  -  total flux cleaned = 0.10834 Jy
! Component: 200  -  total flux cleaned = 0.115612 Jy
! Total flux subtracted in 200 components = 0.115612 Jy
! Clean residual min=-0.003588 max=0.004259 Jy/beam
! Clean residual mean=-0.000003 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.115612 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.115612 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9838 mas, bmaj=1.89 mas, bpa=-1.964 degrees
! Estimated noise=0.184744 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00946982 Jy
! Component: 100  -  total flux cleaned = 0.0152359 Jy
! Component: 150  -  total flux cleaned = 0.0191911 Jy
! Component: 200  -  total flux cleaned = 0.0221059 Jy
! Total flux subtracted in 200 components = 0.0221059 Jy
! Clean residual min=-0.001462 max=0.001687 Jy/beam
! Clean residual mean=-0.000003 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.137718 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 55 components and 0.137718 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.236 mas, bmaj=2.875 mas, bpa=1.477 degrees
! Estimated noise=0.227474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00366672 Jy
! Component: 100  -  total flux cleaned = 0.00604637 Jy
! Component: 150  -  total flux cleaned = 0.00775288 Jy
! Component: 200  -  total flux cleaned = 0.00906503 Jy
! Total flux subtracted in 200 components = 0.00906503 Jy
! Clean residual min=-0.001437 max=0.001198 Jy/beam
! Clean residual mean=-0.000002 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.146783 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106222 Jy
! Component: 100  -  total flux cleaned = 0.00194087 Jy
! Component: 150  -  total flux cleaned = 0.00267657 Jy
! Component: 200  -  total flux cleaned = 0.00329519 Jy
! Total flux subtracted in 200 components = 0.00329519 Jy
! Clean residual min=-0.001174 max=0.001070 Jy/beam
! Clean residual mean=-0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.150078 Jy
! Adding 96 model components to the UV plane model.
! The established model now contains 143 components and 0.150078 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9838 mas, bmaj=1.89 mas, bpa=-1.964 degrees
! Estimated noise=0.184744 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000739846 Jy
! Component: 100  -  total flux cleaned = 0.00111749 Jy
! Component: 150  -  total flux cleaned = 0.00126206 Jy
! Component: 200  -  total flux cleaned = 0.00137436 Jy
! Total flux subtracted in 200 components = 0.00137436 Jy
! Clean residual min=-0.000971 max=0.000935 Jy/beam
! Clean residual mean=-0.000000 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.151453 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 166 components and 0.151453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057863Jy  sigma=1.284463
! Fit after  self-cal, rms=0.057854Jy  sigma=1.284240
wmodel /J1615+2130_X_map.mod
! wmodel: Unable to open new model file: /J1615+2130_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1615+2130_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9838 x 1.89 at -1.964 degrees (North through East)
! Clean map  min=-0.00087988  max=0.10277 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1615+2130_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.102775 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000236308 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.689783 0.689783 1.37957 2.75913 5.51826 11.0365 22.0731 44.1461 88.2922
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.102 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  434.919 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1615+2130_X_dfm.log closed on Thu May 19 23:28:01 2016