! Started logfile: /scr/pima/bg219i_uvs/J1611+1856_X_dfm.log on Thu May 19 23:27:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1611+1856_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1611+1856_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.742063 visibilities/baseline/integration-bin.
! Found source: J1611+1856
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11220 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1611+1856_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.023733Jy  sigma=24.881943
! Fit after  self-cal, rms=0.799280Jy  sigma=19.354774
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6967 mas, bmaj=1.56 mas, bpa=-2.478 degrees
! Estimated noise=0.526073 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153789 Jy
! Component: 100  -  total flux cleaned = 0.18856 Jy
! Total flux subtracted in 100 components = 0.18856 Jy
! Clean residual min=-0.005624 max=0.013093 Jy/beam
! Clean residual mean=-0.000002 rms=0.001484 Jy/beam
! Combined flux in latest and established models = 0.18856 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.18856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065361Jy  sigma=1.512071
! Fit after  self-cal, rms=0.065349Jy  sigma=1.511788
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146216 Jy
! Component: 100  -  total flux cleaned = 0.0223475 Jy
! Total flux subtracted in 100 components = 0.0223475 Jy
! Clean residual min=-0.004289 max=0.005441 Jy/beam
! Clean residual mean=-0.000002 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.210907 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.210907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061393Jy  sigma=1.399234
! Fit after  self-cal, rms=0.061347Jy  sigma=1.398139
! Inverting map 
! Added new window around map position (0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00569803 Jy
! Component: 100  -  total flux cleaned = 0.00899399 Jy
! Total flux subtracted in 100 components = 0.00899399 Jy
! Clean residual min=-0.003630 max=0.003780 Jy/beam
! Clean residual mean=-0.000001 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.219901 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 0.219901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060751Jy  sigma=1.380372
! Fit after  self-cal, rms=0.060719Jy  sigma=1.379666
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8894 mas, bmaj=1.855 mas, bpa=-1.213 degrees
! Estimated noise=0.310849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00317248 Jy
! Component: 100  -  total flux cleaned = 0.00489014 Jy
! Component: 150  -  total flux cleaned = 0.00596852 Jy
! Component: 200  -  total flux cleaned = 0.00655242 Jy
! Total flux subtracted in 200 components = 0.00655242 Jy
! Clean residual min=-0.002779 max=0.003120 Jy/beam
! Clean residual mean=-0.000003 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.226454 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 34 components and 0.226454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060566Jy  sigma=1.374948
! Fit after  self-cal, rms=0.060551Jy  sigma=1.374548
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8894 x 1.855 at -1.213 degrees (North through East)
! Clean map  min=-0.0026743  max=0.20181 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.05     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.03     OV        0.98     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.06     KP        0.99     
!   LA        1.01     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        1.02     
!   LA        0.98     MK        1.01     NL        1.04     OV        0.97     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.05     KP        1.05     
!   LA        1.00     MK        1.00     NL        1.03     OV        0.94     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        1.04     
!   LA        0.99     MK        0.97     NL        1.00     OV        0.96     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.06     KP        1.04     
!   LA        1.00     MK        1.00     NL        1.04     OV        0.97     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.07     KP        1.01     
!   LA        1.04     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        1.02     
!   LA        0.99     MK        1.03     NL        0.97     OV        0.95     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        1.01     
!   LA        1.02     MK        0.97     NL        1.01     OV        0.95     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.04     KP        1.03     
!   LA        1.03     MK        0.99     NL        1.01     OV        0.96     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.06     KP        1.01     
!   LA        1.01     MK        1.05     NL        0.98     OV        0.95     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.05     KP        1.00     
!   LA        1.00     MK        1.00     NL        0.99     OV        0.95     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.060551Jy  sigma=1.374548
! Fit after  self-cal, rms=0.060665Jy  sigma=1.363902
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.89 mas, bmaj=1.859 mas, bpa=-1.112 degrees
! Estimated noise=0.310632 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000670604 Jy
! Component: 100  -  total flux cleaned = -0.00089889 Jy
! Component: 150  -  total flux cleaned = -0.00105203 Jy
! Component: 200  -  total flux cleaned = -0.00112479 Jy
! Total flux subtracted in 200 components = -0.00112479 Jy
! Clean residual min=-0.002156 max=0.002346 Jy/beam
! Clean residual mean=-0.000005 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.225329 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 43 components and 0.225329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060642Jy  sigma=1.363300
! Fit after  self-cal, rms=0.060657Jy  sigma=1.363170
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060657Jy  sigma=1.363170
! Fit after  self-cal, rms=0.060541Jy  sigma=1.358315
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8898 mas, bmaj=1.858 mas, bpa=-1.07 degrees
! Estimated noise=0.310314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000693319 Jy
! Component: 100  -  total flux cleaned = -0.000848841 Jy
! Component: 150  -  total flux cleaned = -0.000949241 Jy
! Component: 200  -  total flux cleaned = -0.00103884 Jy
! Total flux subtracted in 200 components = -0.00103884 Jy
! Clean residual min=-0.002034 max=0.002184 Jy/beam
! Clean residual mean=-0.000005 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.22429 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 48 components and 0.22429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060530Jy  sigma=1.358004
! Fit after  self-cal, rms=0.060530Jy  sigma=1.357958
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13.8, 15.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170579 Jy
! Component: 100  -  total flux cleaned = 0.00184644 Jy
! Component: 150  -  total flux cleaned = 0.00178236 Jy
! Component: 200  -  total flux cleaned = 0.0018108 Jy
! Total flux subtracted in 200 components = 0.0018108 Jy
! Clean residual min=-0.001849 max=0.002056 Jy/beam
! Clean residual mean=-0.000005 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.226101 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 64 components and 0.226101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060458Jy  sigma=1.356362
! Fit after  self-cal, rms=0.060451Jy  sigma=1.356277
! Inverting map 
! Added new window around map position (0.8, -36).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169591 Jy
! Component: 100  -  total flux cleaned = 0.00200469 Jy
! Component: 150  -  total flux cleaned = 0.00218451 Jy
! Component: 200  -  total flux cleaned = 0.00224395 Jy
! Total flux subtracted in 200 components = 0.00224395 Jy
! Clean residual min=-0.001666 max=0.001759 Jy/beam
! Clean residual mean=-0.000004 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.228345 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 81 components and 0.228345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060372Jy  sigma=1.354833
! Fit after  self-cal, rms=0.060369Jy  sigma=1.354770
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060369Jy  sigma=1.354770
! Fit after  self-cal, rms=0.060294Jy  sigma=1.354596
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8902 mas, bmaj=1.858 mas, bpa=-1.018 degrees
! Estimated noise=0.309862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000790042 Jy
! Component: 100  -  total flux cleaned = 0.00101029 Jy
! Component: 150  -  total flux cleaned = 0.00101029 Jy
! Component: 200  -  total flux cleaned = 0.000987182 Jy
! Total flux subtracted in 200 components = 0.000987182 Jy
! Clean residual min=-0.001562 max=0.001677 Jy/beam
! Clean residual mean=-0.000003 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.229332 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 94 components and 0.229332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060270Jy  sigma=1.354117
! Fit after  self-cal, rms=0.060268Jy  sigma=1.354104
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.23722e-05 Jy
! Component: 100  -  total flux cleaned = 7.26983e-05 Jy
! Component: 150  -  total flux cleaned = 7.29333e-05 Jy
! Component: 200  -  total flux cleaned = 7.27405e-05 Jy
! Total flux subtracted in 200 components = 7.27405e-05 Jy
! Clean residual min=-0.001518 max=0.001655 Jy/beam
! Clean residual mean=-0.000003 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.229405 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 101 components and 0.229405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060254Jy  sigma=1.353802
! Fit after  self-cal, rms=0.060253Jy  sigma=1.353799
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060253Jy  sigma=1.353799
! Fit after  self-cal, rms=0.060248Jy  sigma=1.353769
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=2.784 mas, bpa=0.1158 degrees
! Estimated noise=0.391493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192628 Jy
! Component: 100  -  total flux cleaned = 0.000168826 Jy
! Component: 150  -  total flux cleaned = 0.000147319 Jy
! Component: 200  -  total flux cleaned = 0.000109748 Jy
! Total flux subtracted in 200 components = 0.000109748 Jy
! Clean residual min=-0.001695 max=0.001863 Jy/beam
! Clean residual mean=-0.000007 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.229515 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 112 components and 0.229515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060245Jy  sigma=1.353714
! Fit after  self-cal, rms=0.060242Jy  sigma=1.353674
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.6608e-05 Jy
! Component: 100  -  total flux cleaned = 8.92286e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103248 Jy
! Component: 200  -  total flux cleaned = 0.000115767 Jy
! Total flux subtracted in 200 components = 0.000115767 Jy
! Clean residual min=-0.001690 max=0.001790 Jy/beam
! Clean residual mean=-0.000007 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.22963 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 119 components and 0.22963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060244Jy  sigma=1.353718
! Fit after  self-cal, rms=0.060242Jy  sigma=1.353709
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8904 mas, bmaj=1.858 mas, bpa=-1.025 degrees
! Estimated noise=0.309888 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8904 x 1.858 at -1.025 degrees (North through East)
! Clean map  min=-0.0013614  max=0.20148 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6972 mas, bmaj=1.562 mas, bpa=-2.248 degrees
! Estimated noise=0.525666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153562 Jy
! Component: 100  -  total flux cleaned = 0.188651 Jy
! Component: 150  -  total flux cleaned = 0.204118 Jy
! Component: 200  -  total flux cleaned = 0.21259 Jy
! Total flux subtracted in 200 components = 0.21259 Jy
! Clean residual min=-0.003289 max=0.004103 Jy/beam
! Clean residual mean=-0.000002 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.21259 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.21259 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8904 mas, bmaj=1.858 mas, bpa=-1.025 degrees
! Estimated noise=0.309888 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568421 Jy
! Component: 100  -  total flux cleaned = 0.00855731 Jy
! Component: 150  -  total flux cleaned = 0.0107205 Jy
! Component: 200  -  total flux cleaned = 0.0124745 Jy
! Total flux subtracted in 200 components = 0.0124745 Jy
! Clean residual min=-0.002001 max=0.001923 Jy/beam
! Clean residual mean=-0.000005 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.225064 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 31 components and 0.225064 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=2.784 mas, bpa=0.1158 degrees
! Estimated noise=0.391493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212458 Jy
! Component: 100  -  total flux cleaned = 0.00317043 Jy
! Component: 150  -  total flux cleaned = 0.00343869 Jy
! Component: 200  -  total flux cleaned = 0.00366672 Jy
! Total flux subtracted in 200 components = 0.00366672 Jy
! Clean residual min=-0.001816 max=0.002053 Jy/beam
! Clean residual mean=-0.000007 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.228731 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230466 Jy
! Component: 100  -  total flux cleaned = 0.00045727 Jy
! Component: 150  -  total flux cleaned = 0.000581695 Jy
! Component: 200  -  total flux cleaned = 0.000691385 Jy
! Total flux subtracted in 200 components = 0.000691385 Jy
! Clean residual min=-0.001774 max=0.001870 Jy/beam
! Clean residual mean=-0.000006 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.229423 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 55 components and 0.229423 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8904 mas, bmaj=1.858 mas, bpa=-1.025 degrees
! Estimated noise=0.309888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394174 Jy
! Component: 100  -  total flux cleaned = 0.000467745 Jy
! Component: 150  -  total flux cleaned = 0.000469307 Jy
! Component: 200  -  total flux cleaned = 0.000471779 Jy
! Total flux subtracted in 200 components = 0.000471779 Jy
! Clean residual min=-0.001592 max=0.001640 Jy/beam
! Clean residual mean=-0.000003 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.229894 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 73 components and 0.229894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060305Jy  sigma=1.354963
! Fit after  self-cal, rms=0.060299Jy  sigma=1.354791
wmodel /J1611+1856_X_map.mod
! wmodel: Unable to open new model file: /J1611+1856_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1611+1856_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8904 x 1.858 at -1.025 degrees (North through East)
! Clean map  min=-0.0014479  max=0.20162 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1611+1856_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.201616 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000396239 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.589594 0.589594 1.17919 2.35838 4.71675 9.4335 18.867 37.734 75.468
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.201 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  508.824 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1611+1856_X_dfm.log closed on Thu May 19 23:27:53 2016